Single Driver for GaAs FET Switches and Attenuators
Rev. V6
MADRCC0006, MADR-009151-000DIE
1
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
1
Features
High Speed CMOS Technology
Single Channel
Positive Voltage Control
Low Power Dissipation
Low Cost Plastic SOIC-8 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
MADRCC0006 is RoHS* Compliant Version of
SWD-109
Description
The MADRCC0006 is a single channel driver used
to translate TTL control inputs into gate control
voltages for GaAs FET microwave switches and
attenuators. High speed analog CMOS technology
is utilized to achieve low power dissipation at
moderate to high speeds, encompassing most
microwave switching applications. The output high
level is optionally 0 to +2 V (relative to GND) to
optimize the intermodulation products of the control
devices at low frequencies.
1. Reference Application Note M513 for reel size information.
2. Die sales are available in waffle packs in increments of 100
pieces.
Functional Schematic
Pin Configuration3
Pin No. Function
1 Output A
2 GND
3 VCC
4 C1, Logic
5 VEE
6 VOPT
7 GND
8 Output B
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
Ordering Information1
Part Number Package
MADRCC0006 SOIC-8
MADRCC0006TR 1000 piece reel, SOIC-8
MADR-0009151-000DIE Die2
3. The bottom of the die should be isolated for part number
MADR-009151-000DIE.
VCC VOPT
Logic, C1 Output A
Output B
VEE
VEE
VOPT
TTL
Buffer
Level
Shifter
Inverter Level
Shifter
Single Driver for GaAs FET Switches and Attenuators
Rev. V6
MADRCC0006, MADR-009151-000DIE
2
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
2
Guaranteed Operating Ranges
Symbol Parameter
4
Unit Min. Typ. Max.
VCC Positive DC Supply Voltage V 4.5 5.0 5.5
VEE Negative DC Supply Voltage V -8.5 -5.0 -4.5
VOPT5 Optional DC Output Supply Voltage V 0 1.0 2.0
VOPT-VEE Negative Supply Voltage Range V 4.5 6.5 11.0
VCC-VEE Positive to negative Supply Range V 9.0 10.0 14.0
TA Operating Ambient temperature °C -40 +25 +85
IOH DC Output Current - High mA — — -1.0
IOL DC Output Current - Low mA — — 1.0
TRISE, TFALL Maximum Input Rise or Fall Time ns — — 500
4. All voltages are relative to GND.
5. VOPT is grounded for most applications. To improve the intermodulation performance and the 1 dB compression point of GaAs control
devices at low frequencies, VOPT can be increased to between 1 and 2 V. The nonlinear characteristics of the GaAs control devices will
approximate performance at 500 MHz. It should be noted that the control current is on the GaAs MMICs will increase when positive
controls are applied.
6. MACOM recommends that VCC be powered on before VEE and powered off after VEE.
Symbol Parameter Test Conditions Units Min. Typ. Max.
VIH Input High Voltage Guaranteed High Input Voltage V 2.0 — —
VIL Input Low Voltage V — — 0.8 Guaranteed Low Input Voltage
VOH Output High Voltage IOH = -1 mA VEE = max. V VOPT -0.1 — —
VOL Output Low Voltage IOL = 1 mA VEE = max. V — — VEE +0.1
IIN Input Leakage Current VIN = VCC or GND VEE = min. µA — .01 10
ICC Quiescent Supply Current VCC = max.
VOPT = min. or max.
VEE = min.
VIN = VCC or GND µA — — 100
D ICC Additional Supply Current,
per TTL Input pin VCC= max. VIN = VCC -2.1 V mA — — 1.0
DC Characteristics over Guaranteed Operating Range
Single Driver for GaAs FET Switches and Attenuators
Rev. V6
MADRCC0006, MADR-009151-000DIE
3
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
3
Truth Table
Input Outputs
C1 A B
Logic “0” VEE VOPT
Logic “1” VOPT VEE
Symbol Parameter Unit -55 to +25°C <+85°C <+125°C
TPLH Propagation Delay ns 22 25 30
TPHL Propagation Delay ns 22 25 30
TTLH Output Rising Transition Time ns 9.0 9.0 9.0
TTHL Output Falling Transition Time ns 8.0 8.0 8.0
TSKEW Delay Skew, Output A to Output B ns 4.0 4.0 4.0
CIN Input Capacitance pF 10 10 10
CPDC Power Dissipation Capacitance8 pF 10 10 10
CPDE Power Dissipation Capacitance8 pF 140 140 140
AC Characteristics Over Guaranteed Operating Range7
7. VCC = 4.5 V, VOPT - VEE = min or max, VOPT = 0 V, CL = 25 pF, TRISE, TFALL = 6 ns. These conditions represent the worst case for slow delays.
8. Total Power Dissipation is calculated by the following formula: PD = VCC 2fCPDC + (VOPT-VEE) 2fCPDE.
Absolute Maximum Ratings9,10,11
Symbol Parameter Unit Min. Max.
VCC Positive DC Supply Voltage V -0.5 7.0
VEE Negative DC Supply Voltage V -9.0 0.5
VOPT Optional DC Output Supply Voltage V -0.5 VCC +0.5
VOPT-VEE Output to Negative Supply Voltage Range V -0.5 11.0
VCC-VEE Positive to Negative Supply Voltage Range V -0.5 14.0
VI DC Input Voltage V -0.5 VCC +0.5
II DC Input Current mA -25 25
VO DC Output Voltage V VEE –0.5 VOPT +0.5
PD12 Power Dissipation in Still Air mW — 500
VO DC Output Current mA -25 25
TSTG Storage Temperature °C -65 150
9. All voltages are referenced to GND. All inputs and outputs incorporate latch-up protection structures.
10. Exceeding any one or combination of these limits may cause permanent damage to this device.
11. MACOM does not recommend sustained operation near these survivability limits.
12. Derate -7 mW/°C from 65°C to 85°C.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
These electronic devices are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these devices.
Single Driver for GaAs FET Switches and Attenuators
Rev. V6
MADRCC0006, MADR-009151-000DIE
4
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
4
Lead-Free, SOIC-8†
† Reference Application Note M538 for lead-free solder reflow recommendations.
Switching Waveforms
Notes:
1. Reference JEDEC MS-012-AA for additional dimensional and tolerance information.
2. Reference M538 application note for footprint information.
3. All dimensions shown as inches/mm.
Single Driver for GaAs FET Switches and Attenuators
Rev. V6
MADRCC0006, MADR-009151-000DIE
5
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
5
Pad Configuration13,14
Die Size: 1080 x 1240 µm (nominal)
13. All X,Y dimensions are at bond pad center.
14. Die thickness is 9.5 mils.
Pad No. X (µm) nominal Y (µm) nominal Pad Size (µm)
0 0 0 Lower left edge of die
1 138 1042 92 x 92
2 138 835.5 92 x 92
3 138 636.75 92 x 92
4 313.75 198 92 x 92
5 838.5 198 92 x 92
6 942 378 92 x 92
7 942 558 92 x 92
8 942 1042 92 x 92
9 1080 1240 Upper right edge of die
DIE Outline Drawing
Single Driver for GaAs FET Switches and Attenuators
Rev. V6
MADRCC0006, MADR-009151-000DIE
6
6
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
6
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
