High-Voltage Solid State Relays Output Characteristics Package Outline Product Group Optically Coupled SSRs 6 6 Pin DIP Load Current Max. Recommended (mA) ON-Resistance Max. at 25C ( ) ac/dc dc ac/dc dc LH1517AT 150 400 800 3 0.85 LH1510AT 200 200 350 15 3.75 LH1518AT 250 130 300 20 5.00 DC S' LH1519AT 250 225 450 10 2.50 5 4 LH1540AT 350 120 250 25 6.25 LH1546AT 350 120 200 35 10 LH1500AT 350 150 250 25 6.25 LH1550AT11) 350 100 -- 50 -- LH1547AT16) 400 95 -- 34 -- LH1525AT 400 120 250 33 8.25 LH1511BT 200 200 300 15 3.75 LH1501BT 350 150 200 25 6.25 S' 1 Optically Coupled SSRs S Load Voltage Max. (V) 1 Form A S S Base Part Number Contact Form 2 3 1 Form B S 6 DC S' 5 4 S' 1 2 3 * IF = 10 mA 1. Low capacitance SSR (3.5 pF). 2. Diode offset in I/V characteristics, contact form similar to one half of LH1524 AB. 3. Break-before-make operation. 4. High-frequency SSR (< 50 MHz). 5. Current through both poles operating simultaneously. Load current for individual pole operations is higher. 6. 1 Form A, DC relay. 7. Surface mount Flat-Pack 8-pin. 2001 Infineon Technologies Corp. * Optoelectronics Division * San Jose, CA www.infineon.com/opto * 1-888-Infineon (1-888-463-4636) 3-2 May 19, 2000-22 High-Voltage Solid State Relays Output Characteristics Current Limit (mA) Typ. at 25 C IF = 5 mA Input Characteristics Operate Time (msec) Max. at 25 C IF = 5 mA LED Operate Current Min. (mA) I/O Isolation (Min.) (Vrms) Package Current Transfer Ratio % Page 25 C Test Specifications Recommended Current for 85 C Operation 3.0* 2.0 6.0 3750 6-pin NA 3-78 2.0* 2.0* 2.0 5.0 5300 6-pin NA 3-56 -- 3.0 3.0 2.0 5.0 5300 6-pin NA 3-82 380 -- 3.0 3.0 2.0 5.0 3750 6-pin NA 3-86 210 -- 2.0 2.0 2.0 5.0 5300 6-pin NA 3-154 200 -- 3.0 3.0 2.0 5.0 5300 6-pin NA 3-177 270 -- 2.0 2.0 2.0 5.0 5300 6-pin NA 3-35 200 -- 3.0 3.0 2.0 5.0 5300 6-pin NA 3-188 210 -- 5.0 5.0 2.0 5.0 5300 6-pin NA 3-183 210 -- 0.8 0.4 0.5 2.0 5300 6-pin NA 3-107 -- -- 3.0* 3.0* 2.0 5.0 3750 6-pin NA 3-62 -- -- 3.0 3.0 2.0 5.0 3750 6-pin NA 3-41 ac/dc dc ton toff -- -- 3.0* 360 720 200 * IF = 10 mA 1. Low capacitance SSR (3.5 pF). 2. Diode offset in I/V characteristics, contact form similar to one half of LH1524 AB. 3. Break-before-make operation. 4. High-frequency SSR (< 50 MHz). 5. Current through both poles operating simultaneously. Load current for individual pole operations is higher. 6. 1 Form A, DC relay. 7. Surface mount Flat-Pack 8-pin. 2001 Infineon Technologies Corp. * Optoelectronics Division * San Jose, CA www.infineon.com/opto * 1-888-Infineon (1-888-463-4636) 3-3 May 19, 2000-22 High-Voltage Solid State Relays Output Characteristics Package Outline Product Group Instrumentation Relays Base Part Number Contact Form Load Voltage Max. (V) Load Current Max. Recommended (mA) ON-Resistance Max. at 25C ( ) ac/dc dc ac/dc dc 1 Form A S 6 6 Pin DIP NC 5 S' 4 S S S' 1 -out K 2 5 B 3 4 +out 4 Pin DIP A 1 4 4 Pin SOP A 2 1 3 2 -- 160 -- LH1485AT 300 50 mA input pins 5-4 -- -- -- LH1546AD 350 120 -- 35 -- 4 LH1546AEF 350 120 -- 35 -- S1 S -- K 50 S -- K 200 3 6 A 1 MOSFET Drivers 2 LH1541AT11) 3 S1 * IF = 10 mA 1. Low capacitance SSR (3.5 pF). 2. Diode offset in I/V characteristics, contact form similar to one half of LH1524 AB. 3. Break-before-make operation. 4. High-frequency SSR (< 50 MHz). 5. Current through both poles operating simultaneously. Load current for individual pole operations is higher. 6. 1 Form A, DC relay. 7. Surface mount Flat-Pack 8-pin. 2001 Infineon Technologies Corp. * Optoelectronics Division * San Jose, CA www.infineon.com/opto * 1-888-Infineon (1-888-463-4636) 3-4 May 19, 2000-22 High-Voltage Solid State Relays Output Characteristics Current Limit (mA) Typ. at 25 C IF = 5 mA ac/dc Input Characteristics Operate Time (msec) Max. at 25 C IF = 5 mA LED Operate Current Min. (mA) I/O Isolation (Min.) (Vrms) Package Current Transfer Ratio % Page 25 C Test Specifications Recommended Current for 85 C Operation 0.25 2.0 5.0 3750 6-pin NA 3-159 3.5 s typ. 300 ns typ. 10 -- 5300 6-pin -- 3-31 -- 3.0 3.0 2.0 5.0 5300 4-pin -- 3-169 -- 3.0 3.0 2.0 5.0 3000 4-pin -- 3-173 dc ton toff -- 0.25 -- * IF = 10 mA 1. Low capacitance SSR (3.5 pF). 2. Diode offset in I/V characteristics, contact form similar to one half of LH1524 AB. 3. Break-before-make operation. 4. High-frequency SSR (< 50 MHz). 5. Current through both poles operating simultaneously. Load current for individual pole operations is higher. 6. 1 Form A, DC relay. 7. Surface mount Flat-Pack 8-pin. 2001 Infineon Technologies Corp. * Optoelectronics Division * San Jose, CA www.infineon.com/opto * 1-888-Infineon (1-888-463-4636) 3-5 May 19, 2000-22 High-Voltage Solid State Relays Output Characteristics Package Outline Product Group Base Part Number Contact Form Load Voltage Max. (V) Load Current Max. Recommended (mA) ON-Resistance Max. at 25C ( ) ac/dc dc ac/dc dc 1 Form A/B,C S1 S1' S2 S2' 8 7 6 5 LH1512BB 200 200 -- 15 -- LH1502BB3) 350 150 -- 25 -- LH1513AB 200 140 -- 15 -- LH1503AB 350 110 -- 25 -- LH1522AB 200 1405) -- 15 -- LH1544AB1) 200 405) -- 160 -- LH1505AB 250 1205) -- 20 -- LH1520AB 350 1105) -- 25 -- LH1532AB 350 1105) -- 25 -- LH1533AB 350 705) -- 50 -- LH1526AB 400 905) -- 33 -- LH1556AB 350 110 -- 35 -- -- 1 2 3 4 2 Form A Optically Coupled SSRs S1 S1' S2 S2' 8 7 6 5 8 Pin DIP S1 S1' S2 S2' 1 2 S1 S1' S2 8 S2 4 Dual 1 Form A Optically Coupled SSRs S1 3 7 S2' 6 5 S1' S2' 1 2 3 4 * IF = 10 mA 1. Low capacitance SSR (3.5 pF). 2. Diode offset in I/V characteristics, contact form similar to one half of LH1524 AB. 3. Break-before-make operation. 4. High-frequency SSR (< 50 MHz). 5. Current through both poles operating simultaneously. Load current for individual pole operations is higher. 6. 1 Form A, DC relay. 7. Surface mount Flat-Pack 8-pin. 2001 Infineon Technologies Corp. * Optoelectronics Division * San Jose, CA www.infineon.com/opto * 1-888-Infineon (1-888-463-4636) 3-6 May 19, 2000-22 High-Voltage Solid State Relays Output Characteristics Current Limit (mA) Typ. at 25 C IF = 5 mA Input Characteristics Operate Time (msec) Max. at 25 C IF = 5 mA LED Operate Current Min. (mA) I/O Isolation (Min.) (Vrms) Package Current Transfer Ratio % Page 25 C Test Specifications Recommended Current for 85 C Operation 3.0* 2.0 5.0 3750 8-pin NA 3-64 6.0* 3.0* 2.0 5.0 3750 8-pin NA 3-43 -- 2.5* 2.5* 3.0 8.0 5300 8-pin NA 3-67 270 -- 2.5* 2.5* 3.0 8.0 5300 8-pin NA 3-46 360 -- 2.0* 2.0* 2.0 5.0 5300 8-pin NA 3-97 -- -- 0.25 0.25 2.0 5.0 5300 8-pin NA 3-164 200 -- 4.0 4.0 2.0 5.0 5300 8-pin NA 3-51 270 -- 2.0 2.0 2.0 5.0 5300 8-pin NA 3-90 210 -- 2.0 2.0 2.0 5.0 5300 8-pin NA 3-134 200 -- 3.0 3.0 2.0 5.0 5300 8-pin NA 3-143 210 -- 0.8 0.4 2.0 5.0 5300 8-pin NA 3-114 210 -- 3.0 3.0 2.0 5.0 5300 8-pin NA 3-191 ac/dc dc ton toff 360 -- 3.0* 270 -- 360 * IF = 10 mA 1. Low capacitance SSR (3.5 pF). 2. Diode offset in I/V characteristics, contact form similar to one half of LH1524 AB. 3. Break-before-make operation. 4. High-frequency SSR (< 50 MHz). 5. Current through both poles operating simultaneously. Load current for individual pole operations is higher. 6. 1 Form A, DC relay. 7. Surface mount Flat-Pack 8-pin. 2001 Infineon Technologies Corp. * Optoelectronics Division * San Jose, CA www.infineon.com/opto * 1-888-Infineon (1-888-463-4636) 3-7 May 19, 2000-22 High-Voltage Solid State Relays Output Characteristics Package Outline Product Group Base Part Number Contact Form Optically Coupled SSRs Load Voltage Max. (V) Load Current Max. Recommended (mA) ON-Resistance Max. at 25C ( ) ac/dc dc ac/dc dc Dual 1 Form B S1 S1' S2 S2' 8 7 6 5 LH1523BB 200 140 -- 15 -- LH1521BB 350 110 -- 25 -- LH1529AB 350 120 -- 25 -- LH1529BB 350 120 -- 25 -- LH1549AB 400 120 -- 33 -- LH1539AB 350 120 -- 25 -- LH1528AB 350 150 -- 25 -- LH1514AB4) 15 150 -- 8 -- S1 S1 S1' S2 S2' 1 2 3 1 Form A/Optocoupler Telecom Switches S S' 8 S 6 5 2 3 4 1 Form A/Darlington Telecom Switches 8 1 7 6 5 2 3 4 1 Form B/Optocoupler Telecom Switches S 8 S 7 S' 1 8 Pin DIP 4 S' 7 6 5 S' 1 High Frequency Relays (T1 Applications) S1 S1' S2 S2' 2 3 4 2 Form A S1 S1' S2 S2' 8 7 6 5 1 2 3 * IF = 10 mA 1. Low capacitance SSR (3.5 pF). 2. Diode offset in I/V characteristics, contact form similar to one half of LH1524 AB. 3. Break-before-make operation. 4 4. High-frequency SSR (< 50 MHz). 5. Current through both poles operating simultaneously. Load current for individual pole operations is higher. 6. 1 Form A, DC relay. 7. Surface mount Flat-Pack 8-pin. 2001 Infineon Technologies Corp. * Optoelectronics Division * San Jose, CA www.infineon.com/opto * 1-888-Infineon (1-888-463-4636) 3-8 May 19, 2000-22 High-Voltage Solid State Relays Output Characteristics Current Limit (mA) Typ. at 25 C IF = 5 mA Input Characteristics Operate Time (msec) Max. at 25 C IF = 5 mA LED Operate Current Min. (mA) I/O Isolation (Min.) (Vrms) Package Current Transfer Ratio % Page 25 C Test Specifications Recommended Current for 85 C Operation 3.0* 2.0 5.0 3750 8-pin NA 3-102 3.0 3.0 2.0 5.0 3750 8-pin NA 3-95 -- 2.5 2.5 2.0 5.0 5300 8-pin 33 3-126 210 -- 2.5 2.5 2.0 5.0 5300 8-pin 100 3-126 210 -- 2.0 0.5 1.0 3.0 5300 8-pin 33 3-185 210 -- 2.5 2.5 2.0 5.0 5300 8-pin 300 3-146 -- -- 3.0 3.0 2.0 5.0 5300 8-pin 33 3-120 -- -- 1.0* 1.0* 3.0 8.0 3750 8-pin NA 3-72 ac/dc dc ton toff -- -- 3.0* -- -- 210 * IF = 10 mA 1. Low capacitance SSR (3.5 pF). 2. Diode offset in I/V characteristics, contact form similar to one half of LH1524 AB. 3. Break-before-make operation. 4. High-frequency SSR (< 50 MHz). 5. Current through both poles operating simultaneously. Load current for individual pole operations is higher. 6. 1 Form A, DC relay. 7. Surface mount Flat-Pack 8-pin. 2001 Infineon Technologies Corp. * Optoelectronics Division * San Jose, CA www.infineon.com/opto * 1-888-Infineon (1-888-463-4636) 3-9 May 19, 2000-22 High-Voltage Solid State Relays Output Characteristics Package Outline Product Group Base Part Number Contact Form 8 Pin DIP 8 7 6 2 Load Current Max. Recommended (mA) ON-Resistance Max. at 25C () ac/dc dc ac/dc dc 5 MOSFET Driver 1 Load Voltage Max. (V) 3 LH1262CB 15 -- 14 A IF =10 mA -- -- LH1525ACD 400 110 -- 36 -- LH1540ACD 350 110 -- 25 -- LH1532FP7) 350 120 -- 25 -- LH1529FP7) 350 120 -- 25 -- LH1529GP7) 350 120 -- 25 -- LH1556FP 350 120 -- 35 -- 4 1 Form A PCMCIA package PCMCIA Relays S NC Heat Sink 8 5 S S S S' S' 1 2 3 4 Dual 1 Form A Optically Coupled SSRs S1 S1' S2 8 S1 S1' S2 S2' 7 S2' 6 5 Flat Pak 1 2 4 1 Form A/Optocoupler Telecom Switches S S' 8 S 3 7 6 5 S' 1 2 3 4 Dual 1 Form A -- -- A 1 8 S1 K 2 A 3 7 S'1 6 S2 K 4 5 S'2 * IF = 10 mA 1. Low capacitance SSR (3.5 pF). 2. Diode offset in I/V characteristics, contact form similar to one half of LH1524 AB. 3. Break-before-make operation. 4. High-frequency SSR (< 50 MHz). 5. Current through both poles operating simultaneously. Load current for individual pole operations is higher. 6. 1 Form A, DC relay. 7. Surface mount Flat-Pack 8-pin. 2001 Infineon Technologies Corp. * Optoelectronics Division * San Jose, CA www.infineon.com/opto * 1-888-Infineon (1-888-463-4636) 3-10 May 19, 2000-22 High-Voltage Solid State Relays Output Characteristics Current Limit (mA) Typ. at 25 C IF = 5 mA Input Characteristics Operate Time (msec) Max. at 25 C IF = 5 mA LED Operate Current Min. (mA) I/O Isolation (Min.) (Vrms) Package Current Transfer Ratio % Page 25 C Test Specifications Recommended Current for 85 C Operation 90 s IF=20 mA typ. -- -- 3750 8-pin -- 3-27 1.0 0.5 0.5 2.5 1500 8-pin NA 3-104 -- 1.0 1.2 1.0 2.5 1500 8-pin NA 3-151 210 -- 2.5 2.5 2.0 5.0 1500 8-pin -- 3-139 210 -- 2.5 2.5 2.0 5.0 1500 8-pin 33 3-130 210 -- 2.5 2.5 2.0 5.0 1500 8-pin 100 3-130 260 -- 3.0 3.0 2.0 5.0 3000 8-pin -- 3-196 dc ton toff -- 35 s IF=20 mA typ. 210 -- 210 ac/dc * IF = 10 mA 1. Low capacitance SSR (3.5 pF). 2. Diode offset in I/V characteristics, contact form similar to one half of LH1524 AB. 3. Break-before-make operation. 4. High-frequency SSR (< 50 MHz). 5. Current through both poles operating simultaneously. Load current for individual pole operations is higher. 6. 1 Form A, DC relay. 7. Surface mount Flat-Pack 8-pin. 2001 Infineon Technologies Corp. * Optoelectronics Division * San Jose, CA www.infineon.com/opto * 1-888-Infineon (1-888-463-4636) 3-11 May 19, 2000-22