© 2018 Kingbright. All Rights Reserved. Spec No: DSAB5503 Rev No: V.8 Date: 04/18/2018 Page 1 / 1
FEATURES
zSuitable for back panel illumination, circuit board
indicator, LED indicator
zHousing UL rating: 94V-0
zHousing material: Type 66 nylon
zRoHS compliant
PACKAGE DIMENSIONS
RTF-1090
Housing for LED Lamp
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
PRECAUTIONARY NOTES
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to
the latest datasheet for the updated specifications.
3. When using the products ref erenced in this document, please make sure the product is being operate d within the environmental an d electrical limits specified in the datasheet. If
customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues.
4. The information in thi s document applies to typical usage in co nsumer electronics applicatio ns. If customer's application ha s special reliability requi rements or have life-threatenin g
liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.Kingbright.com/application_notes
PACKING & LABEL SPECIFICATIONS
Kingbright
