LMS33460 3V Under Voltage Detector General Description Features The LMS33460 is an under voltage detector with a 3.0V threshold and extremely low power consumption. The LMS33460 is specifically designed to accurately monitor power supplies. It is especially suited to battery powered systems where low quiescent current and small size are required. This IC generates an active output whenever the input voltage drops below 3.0 Volts. n n n n n n n This part uses a precision on-chip voltage reference and a comparator to measure the input voltage. Built in hysteresis helps to prevent erratic operation in the presence of noise. The UVD is available in the ultra-miniature SC70-5 package. Ultra low Power 3.0V detection VIN Range: 0.8V to 7.0V Open drain output Ultra-small SC70-5 package Extended Temperature range (-40C to 85C) Ultra Low Quiescent current (1A typ) Applications n n n n n n Low battery voltage detector Power Fail Indicator Processor Reset Generator Battery Backup Control Battery Operated Equipment Hand-held Instruments Circuit Block Diagram 20020001 Typical Application 20020003 (c) 2004 National Semiconductor Corporation DS200200 www.national.com LMS33460 3V Under Voltage Detector March 2001 LMS33460 Typical Application (Continued) 20020003 Connection Diagram SC70-5 20020002 Top View Ordering Information Package 5-Pin SC70-5 Part Number Package Marking Transport Media NSC Drawing LMS33460MG C33 1k Units Tape and Reel MAA05A LMS33460MGX www.national.com 3k Units Tape and Reel 2 Human Body Model Machine Model If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Input Voltage to GND 2500V 200V TJMAX (Note 3) 150C JA (Note 3) 478C/W 8.0V Output Voltage to GND 8.0V Output Continuous Output Current 30mA Vapor Phase IR Convection Reflow 240C Temperature Range Operating Junction -40C to +85C Storage Temperature Range ESD Rating (Note 4) -65C to +150C Electrical Characteristics Unless otherwise specified, all limits guaranteed for TJ = 25C. Boldface limits apply at the temperature extremes. Symbol Parameter Conditions Min Typ Max Units V VDET Detector Threshold VIN Falling 2.85 3.0 3.15 VHYS Detector Voltage Hysteresis VIN Rising 0.095 0.155 0.215 V IIN Input Supply Current VIN = 2.87V - 1.0 2.2 A VIN = 4.7V - 1.2 3.6 A VIN = 7.0V (Note 3) - 25 200 A - - 7.0 V 0.7 1.0 1.1 1.3 V VIN(MAX) Maximum Operating Voltage VIN(MIN) Maximum Operating Voltage (Note 2) IOUT(LOW) Output Current Low TpdHL Output Delay Time Output Transition High to Low CL = 10pF, RL = 470k VDET/T VOUT = 0.05V, VIN = 1.1V VOUT = 0.50V, VIN = 1.5V Detect Voltage Temperature Coefficient 0.01 2 0.6 11 mA - 70 130 sec - 120 - PPM/C Note 1: Absolute maximum ratings indicate limits beyond which damage to the device may occur. Electrical specifications do not apply when operating the device beyond its rated operating conditions. Note 2: Temperature range specifications is guaranteed by design. Note 3: Quiescent current will increase substantially above 5.5 volts, but is very low in the normal range below 5.5 volts. Note 4: Human body model, 1.5k in series with 100pF. Machine model, 0 in series with 200pF. 3 www.national.com LMS33460 Absolute Maximum Ratings (Note 1) LMS33460 Typical Characteristics (TA = 25C, RL = 470k and CL = 10pF unless otherwise noted). Supply Current vs. Input Voltage Detector Threshold vs. Temperature 20020005 20020004 Output Current vs. Input Voltage Output Delay Time vs. Temperature 20020006 www.national.com 20020007 4 The LMS33460 is a micro power under voltage sensing circuit with an open drain output configuration, which requires a pull resistor. 20020008 FIGURE 1. Propagation Delay 5 www.national.com LMS33460 The LMS33460 features a voltage reference, a comparator with precise thresholds and built in hysteresis to prevent erratic reset operation. Application Circuit Information LMS33460 3V Under Voltage Detector Physical Dimensions inches (millimeters) unless otherwise noted 5-Pin SC70-5 NSC Package Number MAA05A National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. For the most current product information visit us at www.national.com. LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. BANNED SUBSTANCE COMPLIANCE National Semiconductor certifies that the products and packing materials meet the provisions of the Customer Products Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain no ``Banned Substances'' as defined in CSP-9-111S2. National Semiconductor Americas Customer Support Center Email: new.feedback@nsc.com Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Francais Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Support Center Email: ap.support@nsc.com National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: jpn.feedback@nsc.com Tel: 81-3-5639-7560