Surface Mount SOIC Resistor Networks SOIC Series * Tested for COTS applications * Both narrow and wide body versions available * Standard JEDEC 8, 14, 16, and 20 pin packages * Ultra-stable TaNSil(R) resistors on silicon substrates * RoHS compliant and Sn/Pb terminations available IRC's TaNSil(R) SOIC resistor networks are the perfect solution for high volume applications that demand a small wiring board footprint. The .050" lead spacing provides higher lead density, increased component count, lower resistor cost, and high reliability. The tantalum nitride film system on silicon provides precision tolerance, exceptional TCR tracking, low cost and miniature package. Excellent performance in harsh, humid environments is a trademark of IRC's self-passivating TaNSil(R) resistor film. The SOIC series is ideally suited for the latest surface mount assembly techniques and each lead can be 100% visually inspected. The compliant gull wing leads relieve thermal expansion and contraction stresses created by soldering and temperature excursions. For applications requiring high performance resistor networks in a low cost, surface mount package, specify IRC SOIC resistor networks. Electrical Data Environmental Data Resistance Range 10 - 250K Absolute Tolerance To 0.1% Ratio Tolerance to R1 To 0.05% Absolute TCR To 25ppm/C Tracking TCR To 5ppm/C Element Power Rating @ 70C Isolated Schematic Bussed Schematic Power Rating @ 70C SOIC-N Package 100mW 50mW 8-Pin 14-Pin 16-Pin 400mW 700mW 800mW 16-Pin 20-Pin 1.2W 1.5W Power Rating @ 70C SOIC-W Package Rated Operating________________ Voltage (not to exceed Power X Resistance) Operating Temperature Noise Test Per MIL-PRF-83401 Typical Delta R Max Delta R Thermal Shock 0.02% 0.1% Power Conditioning 0.03% 0.1% High Temperature Exposure 0.03% 0.05% Short-time Overload 0.02% 0.05% Low Temperature Storage 0.03% 0.05% Life 0.05% 2.0% 100 Volts -55C to +125C <-30dB General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC's own data and is considered accurate at time of going to print. (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com A subsidiary of TT electronics plc SOIC Series Issue January 2009 Sheet 1 of 4 Surface Mount SOIC Resistor Networks Manufacturing Capability Data ISOLATED SCHEMATIC A Absolute TCR (ppm/C) BUSSED SCHEMATIC B Ohmic Range () Available Tolerances Available Ratio Tolerances Best Tracking (ppm/C) Ohmic Range () Available Tolerances Available Ratio Tolerances Best Tracking (ppm/C) 10-25 FGJ FG 50 10-25 FGJ FG 200 26-50 DFGJ CDFG 10 26-50 FGJ DFG 100 51-200 CDFGJ CDFG 5 51-100 DFGJ CDFG 50 5 101-200 DFGJ BCDFG 25 201-500 BCDFGJ BCDFG 20 250 201-250K BCDFGJ ABCDFG 501-100K 100 5 26-50 DFGJ CDFG 10 26-50 FGJ DFG 100 51-200 CDFGJ CDFG 5 51-100 DFGJ CDFG 50 201-250K BCDFGJ ABFG 5 101-200 DFGJ BCDFG 25 201-500 BCDFGJ BCDFG 20 501-100K 50 BCDFGJ ABCDFG BCDFGJ ABCDFG 5 26-50 DFGJ CDFG 10 51-100 DFGJ CDFG 50 51-200 CDFGJ CDFG 5 101-200 DFGJ BCDFG 25 201-250K BCDFGJ ABFG 5 201-500 BCDFGJ BCDFG 20 501-100K 51-200 CDFGJ CDFG 5 201-500 201-250K BCDFGJ ABFG 5 501-100K BCDFGJ ABCDFG 5 BCDFGJ 20 BCDFG 25 (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com BCDFGJ ABCDFG 5 SOIC Series Issue January 2009 Sheet 2 of 4 Surface Mount SOIC Resistor Networks Physical and Schematic Data N SOIC-N D E H 1 2 3 SOIC-W 8-Pin 14-Pin 16-Pin 16-Pin 20-Pin 0.193"0.004 0.341"0.004 0.390"0.004 0.402"0.004 0.502"0.004 H 0.236"0.008 0.406"0.008 E 0.153".004 0.295"0.004 A 0.064"0.004 0.100"0.004 C 0.0075" - 0.010" 0.011"0.002 0.050" Typ Note: N = number of pins (8, 14, 16) D A C 0.016" .002" 0 min / 8 max 0.007" 0.003" Note: Lead Coplanarity 0.004" Max. Note: All dimesions exclude mold flash and end flash which shall not exceed 0.006" per side. Power Derating Curve N N R1 2 1 3 Schematic A Isolated N % Of Rated Power 100 R1 1 .033"0.017 2 3 50 Schematic B Bussed Note: N = number of pins (8, 14, 16) 10 R1 1 2 25 3 Schematic B Bussed A 70 125 Ambient Temperature (C) For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. Note: N = number of pins (8, 14, 16) (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com SOIC Series Issue January 2009 Sheet 3 of 4 Surface Mount SOIC Resistor Networks Ordering Data Prefix GUS - SS4A - 01 - 1002 - F B Style, Schematic and Termination SS4A = SS4ALF = SS4B = SS4BLF = 8-pin SOIC-N, 4 Isolated Resistors; Sn/Pb terminations 8-pin SOIC-N, 4 Isolated Resistors; 100% tin (Pb-free) terminations 8-pin SOIC-N, 7 Bussed Resistors; Sn/Pb terminations 8-pin SOIC-N, 7 Bussed Resistors; 100% tin (Pb-free) terminations SS7A = SS7ALF = SS7B = SS7BLF = 14-pin SOIC-N, 7 Isolated Resistors; Sn/Pb terminations 14-pin SOIC-N, 7 Isolated Resistors; 100% tin (Pb-free) terminations 14-pin SOIC-N, 13 Bussed Resistors; Sn/Pb terminations 14-pin SOIC-N, 13 Bussed Resistors; 100% tin (Pb-free) terminations SS8A = SS8ALF = SS8B = SS8BLF = 16-pin SOIC-N, 8 Isolated Resistors; Sn/Pb terminations 16-pin SOIC-N, 8 Isolated Resistors; 100% tin (Pb-free) terminations 16-pin SOIC-N, 15 Bussed Resistors; Sn/Pb terminations 16-pin SOIC-N, 15 Bussed Resistors; 100% tin (Pb-free) terminations SL8A = SL8ALF = SL8B = SL8BLF = 16-pin SOIC-W, 8 Isolated Resistors; Sn/Pb terminations 16-pin SOIC-W, 8 Isolated Resistors; 100% tin (Pb-free) terminations 16-pin SOIC-W, 15 Bussed Resistors; Sn/Pb terminations 16-pin SOIC-W, 15 Bussed Resistors; 100% tin (Pb-free) terminations SL0A = SL0ALF = SL0B = SL0BLF = 20-pin SOIC-W, 10 Isolated Resistors; Sn/Pb terminations 20-pin SOIC-W, 10 Isolated Resistors; 100% tin (Pb-free) terminations 20-pin SOIC-W, 19 Bussed Resistors; Sn/Pb terminations 20-pin SOIC-W, 19 Bussed Resistors; 100% tin (Pb-free) terminations Absolute TCR Code 00 = 250ppm/C; 01 = 100ppm/C 02 = 50ppm/C; 03 = 25ppm/C Resistance Code 4-Digit Resistance Code Ex: 1002 = 10K, 50R1 = 50.1 Absolute Tolerance Code J = 5%; G = 2%; F = 1%; D = 0.5% C = 0.25%; B = 0.1% Optional Ratio Tolerance Code G = 2%; F = 1%; D = 0.5%; C = 0.25%; B = 0.1%; A = 0.05% Packaging Specify tubes or tape & reel. (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com SOIC Series Issue January 2009 Sheet 4 of 4