PUSHBUTTONS LUMOTAST FK LUMOTAST FK - Illuminated pushbuttons LUMOTAST FK - Signal lamps 1 LUMOTAST 25 LUMOTAST 25 - Illuminated pushbuttons LUMOTAST 25 - Selector switches LUMOTAST 25 - Keylock switches LUMOTAST 25 - Emergency stop pushbuttons LUMOTAST 25 - Signal lamps 1-3 1-7 1 - 11 1 - 15 1 - 19 1 - 24 1 - 26 1 - 29 1 - 32 LUMOTAST 75 IP40 LUMOTAST 75 IP40 - Illuminated pushbuttons LUMOTAST 75 IP40 - Keylock switches LUMOTAST 75 IP40 - Signal lamps with lamp socket T 4.5 1 - 35 LUMOTAST 75 IP65 LUMOTAST 75 IP65 - Illuminated pushbuttons LUMOTAST 75 IP65 - Signal lamps 1 - 49 Other keylock switches Keylock switches Priority keylock switches Other pushbuttons Pushbuttons non-illuminated - mounting hole diameter 9.1 mm Pushbuttons illuminated - mounting hole diameter 9.1 mm Pushbuttons non-illuminated - mounting hole diameter 15.2 mm Pushbuttons non-illuminated - mounting hole diameter 16.2 mm Pushbuttons non-illuminated - mounting hole diameter 18.2 mm Pushbuttons illuminated - mounting hole diameter 20.3 mm, BA9s - NEW - LUMOTAST 22 - E-Stop, mounting hole diameter 22.3 mm 1 - 37 1 - 42 1 - 45 1 - 51 1 - 57 1 - 63 1 - 65 1 - 68 1 - 73 1 1 1 1 1 1 1 - 75 77 79 81 83 85 87 PUSHBUTTONS GENERAL INFORMATION Concepts 1 1. Momentary pushbuttons are switching elements which are used for making or breaking contact while they are being pressed. 3. Illuminated pushbuttons have the same functions as described for (1) and (2) and feature an additional lamp socket for accomodating a filament, neon lamp or LED. 2. Latching pushbutton are used for making or breaking contact until they are returned to their initial position by being pressed again. 4. Legending can ce effected using kabel holders, legend inserts, by engraving or hot stamping. Grooved transparent lenses are not suitable for legending. CE-Conformity The products of the Chapter Pushbuttons" can - relating to the CE-conformity according to the Low-Voltage Directive 73/23/EWG - be divided into the following groups: All products with an operating voltage < 50 V For these products no directive applies. Emergency-stop components with an operating voltage < 50 V F. ex. LUMOTAST 25 emergency-stop. For this pushbutton the Machine Directive 89/392/EWG applies. EMC-Law The components of this catalogue are within the meaning of the law concerning the Eletromagnetic Conformy (= EMC-Law) "basic components as, f. ex., switches, signal lamps or like" and, therefore, do not fall within the scope of the EMC-Law. All products with an operating voltage > 50 V For these elements the Low-Voltage Directive 72/23/EWG applies. 1-2 Single parts, accessories and illumination For these products no directiveapplies. Marking The marking will be corresponding to the Low-Voltage Directive 73/23/EWG resp. the Directive "CE-Marking 93/68/EWG" either on the packing or on the product itself. PUSHBUTTONS LUMOTAST FK 1 LUMO FK LUMOTAST FK LUMOTAST FK - Illuminated pushbutton range s Illuminable pushbuttons and signal lamps with lamp socket T 1/T 11/4. s Mounting hole diameter 16.2 mm s 35 V / 100 mA max. s Degree of protection: IP65 acc. to DIN EN 60529 s Low profile s Keyed socket connector and flat ribbon cable in insulation displacement (IDC) technology or PCB plug-in socket s Time-saving click fixing method: Insert pushbutton into front panel and press pushbutton once to fix it. s All products are RoHS compliant. 1-3 PUSHBUTTONS LUMOTAST FK Content 1 LUMOTAST FK Illuminated pushbuttons LUMOTAST FK Illuminated pushbutton, round collar LUMOTAST FK Illuminated pushbutton, square collar LUMOTAST FK Illuminated pushbutton, rectangular collar 1-7 1-8 1-9 1 - 10 LUMOTAST FK Signal lamps LUMOTAST FK Signal lamp, round collar LUMOTAST FK Signal lamp, square collar LUMOTAST FK Signal lamp, rectangular collar 1 - 11 1 - 12 1 - 13 1 - 13 LUMO FK 1-4 PUSHBUTTONS LUMOTAST FK - ILLUMINATED PUSHBUTTONS Series LUMOTAST FK 16.2 mm mounting hole diameter 1 Mounting LUMO FK ~ pushbutton as supplied Insert pushbutton into panel cut-out Press once to fit Attach connector with flat-ribbon cable Disassembly from front side 1. Grip body/lens 2. Pull out body/lens 3. Release click lever 4. Pull out pushbutton/signal lamp with cable 1-5 PUSHBUTTONS LUMOTAST FK - ILLUMINATED PUSHBUTTONS Dimensional drawing With quick connector and flat-ribbon cable Connection diagram (PCB top view) 1 LUMO FK 1 + 4 = pushbutton connection, 2 + 3 = lamp connection If LED is used: connection 3 = cathode Plug-in socket for PCB With plug-in socket Front panel top view PCB top view PCB hole diagram Sight on component side 1-6 PUSHBUTTONS LUMOTAST FK - ILLUMINATED PUSHBUTTONS LUMOTAST FK Illuminated pushbuttons 1 LUMO FK Panel cut-out Technical Data General information Actuator Color of lens Form of collar flat lens see order block see order block Dimensions Length of collar Width of collar Diameter of collar Overall height Mounting depth with connector Mounting depth with plug-in socket Mounting hole see order block see order block see order block 6.6 mm 30.7 mm 33.4 mm 16.2 mm Mechanical design Mounting Terminals Contact system Contact function Contact arrangement Contact materials Illumination Lamp socket click quick connection pin connector 4-pole / plug-in socket snap-action contact momentary 1 NO Au yes Bi-Pin T1 / T11/4 Mechanical characteristics Operating force max. Operating travel Switching travel Robustness max. 6N 3 mm 1.9 mm 100 N Electrical characteristics Rated voltage AC/DC max. Rated voltage AC/DC min. Rated current AC/DC max. Rated current AC/DC min. Contact resistance acc. to life max. Contact resistance when new max. Bouncing time max. 35 V 0.02 V 100 mA 0.01 mA 300 mE 100 mE 5 ms Other specifications Operating life (operations) Degree of protection from front side Operation temperature min. Ambient temp. operating max. without lamp /LED Ambient temp. operating max. with lamp /LED Storage temperature min. with socket connector with plug-in socket for PCB 1,000,000 IP65 (DIN EN 60529) -25 C +70 C +55 C -40 C 1-7 PUSHBUTTONS LUMOTAST FK - ILLUMINATED PUSHBUTTONS - Technical data (continued) - LUMOTAST FK - Illuminated pushbutton Storage temperature max. Environmental restistance Weight ROHS compliant REACH compliant 1 LUMO FK +80 C acc. to IEC 60068-2-14, -30, -33 and -78 6g yes yes Accessories LUMOTAST FK - Illuminated pushbutton Description Photo Order no. Additional accessories see page Socket Bi-Pin T 1, LED - 5-6 Socket Bi-Pin T 1, LED superbright - 5-6 Plug-in socket for PCB 5.00.645.036/0000 5 - 28 Cable (flat ribbon cable 10 cm with socket connector and male quick connector, AMP 4-pin) 5.03.771.306/0000 5 - 29 Disassembly tool for LUMOTAST FK 5.05.800.041/0000 5 - 27 Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 28 Socket connector, 4-pin 5.92.025.368/0000 5 - 28 LUMOTAST FK Illuminated pushbutton, round collar Technical data see page 1 - 7 Panel cut-out Contact function Contact arrangement Order no. Note momentary 1 NO 1.15.114.936/0000 Please include the desired lens in your order. Note when using LEDs: A notch on the lamp socket identifies the cathode side (-). 1-8 PUSHBUTTONS LUMOTAST FK - ILLUMINATED PUSHBUTTONS - Table (continued) - LUMOTAST FK - Illuminated pushbutton, round collar Lenses: Lens, round, Lens, round, Lens, round, Lens, round, Lens, round, transparent transparent transparent transparent transparent colorless: 5.49.075.016/1002 red: 5.49.075.016/1306 yellow: 5.49.075.016/1403 green: 5.49.075.016/1505 blue: 5.49.075.016/1607 1 LUMOTAST FK Illuminated pushbutton, square collar LUMO FK Technical data see page 1 - 7 Panel cut-out Contact function Contact arrangement Order no. Note momentary 1 NO 1.15.114.906/0000 Please include the desired lens in your order. Note when using LEDs: A notch on the lamp socket identifies the cathode side (-). Lenses: Lens, square, Lens, square, Lens, square, Lens, square, Lens, square, transparent transparent transparent transparent transparent colorless: 5.49.075.015/1002 red: 5.49.075.015/1306 yellow: 5.49.075.015/1403 green: 5.49.075.015/1505 blue: 5.49.075.015/1607 1-9 PUSHBUTTONS LUMOTAST FK - ILLUMINATED PUSHBUTTONS LUMOTAST FK Illuminated pushbutton, rectangular collar 1 Technical data see page 1 - 7 LUMO FK Panel cut-out Contact function Contact arrangement Order no. Note momentary 1 NO 1.15.114.966/0000 Please include the desired lens in your order. Note when using LEDs: A notch on the lamp socket identifies the cathode side (-). Lenses: Lens, rectangular, Lens, rectangular, Lens, rectangular, Lens, rectangular, Lens, rectangular, 1-10 transparent transparent transparent transparent transparent colorless: 5.49.075.017/1002 red: 5.49.075.017/1306 yellow: 5.49.075.017/1403 green: 5.49.075.017/1505 blue: 5.49.075.017/1607 PUSHBUTTONS LUMOTAST FK - SIGNAL LAMPS LUMOTAST FK Signal lamps 1 LUMO FK Panel cut-out Technical Data General information Form of lens Color of lens Form of collar flat lens see order block see order block Dimensions Length of collar Width of collar Overall height Mounting depth with connector Mounting depth with plug-in socket Mounting hole see order block see order block see order block 30.7 mm 33.4 mm 16.2 mm Mechanical design Mounting Terminals Lamp socket Lamp click quick connection pin connector 4-pole / plug-in socket Bi-Pin T1 / T11/4 filament lamp / LED Electrical characteristics Voltage limit max. Power limit max. 24 V 0.7 W Other specifications Degree of protection from front side Weight Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance ROHS compliant REACH compliant IP65 (DIN EN 60529) 5g -25 C +55 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 yes yes with socket connector with plug-in socket for PCB Accessories LUMOTAST FK - Signal lamp Description Photo Order no. Additional accessories see page Socket Bi-Pin T 1, LED - 5-6 Socket Bi-Pin T 1, LED superbright - 5-6 Plug-in socket for PCB 5.00.645.036/0000 5 - 28 1-11 PUSHBUTTONS LUMOTAST FK - SIGNAL LAMPS - Table (continued) - Accessories LUMOTAST FK - Signal lamp 1 LUMO FK Description Photo Order no. Additional accessories see page Cable (flat ribbon cable 10 cm with socket connector and male quick connector, AMP 4-pin) 5.03.771.306/0000 5 - 29 Disassembly tool for LUMOTAST FK 5.05.800.041/0000 5 - 27 Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 28 Socket connector, 4-pin 5.92.025.368/0000 5 - 28 LUMOTAST FK Signal lamp, round collar Technical data see page 1 - 11 Panel cut-out Power limit max. Voltage limit max. Lamp socket Order no. Note 0.7 W 24 V Bi-Pin T1 / T11/4 1.65.121.936/0000 Please include the desired lens in your order. Do not press in lens in disassembled condition. Note when using LEDs: A notch on the lamp socket identifies the cathode side (-). Lenses: Lens, round, Lens, round, Lens, round, Lens, round, Lens, round, 1-12 transparent transparent transparent transparent transparent colorless: 5.49.075.016/1002 red: 5.49.075.016/1306 yellow: 5.49.075.016/1403 green: 5.49.075.016/1505 blue: 5.49.075.016/1607 PUSHBUTTONS LUMOTAST FK - SIGNAL LAMPS LUMOTAST FK Signal lamp, square collar Technical data see page 1 - 11 1 LUMO FK Panel cut-out Power limit max. Voltage limit max. Lamp socket Order no. Note 0.7 W 24 V Bi-Pin T1 / T11/4 1.65.121.906/0000 Please include the desired lens in your order. Do not press in lens in disassembled condition. Note when using LEDs: A notch on the lamp socket identifies the cathode side (-). Lenses: Lens, square, Lens, square, Lens, square, Lens, square, Lens, square, transparent transparent transparent transparent transparent colorless: 5.49.075.015/1002 red: 5.49.075.015/1306 yellow: 5.49.075.015/1403 green: 5.49.075.015/1505 blue: 5.49.075.015/1607 LUMOTAST FK Signal lamp, rectangular collar Technical data see page 1 - 11 Panel cut-out Power limit max. Voltage limit max. Lamp socket Order no. Note 0.7 W 24 V Bi-Pin T1 / T11/4 1.65.121.966/0000 Please include the desired lens in your order. Do not press in lens in disassembled condition. Note when using LEDs: A notch on the lamp socket identifies the cathode side (-). Lenses: Lens, rectangular, transparent colorless: 5.49.075.017/1002 1-13 PUSHBUTTONS LUMOTAST FK - SIGNAL LAMPS - Table (continued) - LUMOTAST FK - Signal lamp, rectangular collar 1 Lens, Lens, Lens, Lens, LUMO FK 1-14 rectangular, rectangular, rectangular, rectangular, transparent transparent transparent transparent red: 5.49.075.017/1306 yellow: 5.49.075.017/1403 green: 5.49.075.017/1505 blue: 5.49.075.017/1607 PUSHBUTTONS LUMOTAST 25 1 LUMO 25 LUMOTAST 25 LUMOTAST 25 - Pushbutton range s Illuminable pushbuttons and signal lamps. s Mounting hole diameter: 16.2 mm s 35 V / 100 mA max. s Degree of protection: IP65 acc. to DIN EN 60529 s Low profile s Lamp socket Bi-Pin T 1 for LEDs and filament lamps s Keyed socket connector and flat ribbon cable or PCB plug-in socket s Ring nut or click fixing method. s All products are RoHS compliant. 1-15 PUSHBUTTONS LUMOTAST 25 Content 1 LUMO 25 LUMOTAST 25 Illuminated pushbuttons LUMOTAST 25 Illuminated pushbutton with flush lens, Click" quick-assembly feature LUMOTAST 25 Illuminated pushbutton with flush lens, ring nut fixing LUMOTAST 25 Illuminated pushbutton with protruding lens, Click" quick-assembly feature LUMOTAST 25 Illuminated pushbutton with protruding lens, ring nut fixing 1 - 19 1 - 21 1 - 21 1 - 22 1 - 23 LUMOTAST 25 Selector switches LUMOTAST 25 Selector switch, ring nut fixing 1 - 24 1 - 25 LUMOTAST 25 Keylock switches LUMOTAST 25 Keylock switch 1 - 26 1 - 28 LUMOTAST 25 Emergency stop pushbuttons LUMOTAST 25 Emergency stop pushbutton, ring nut fixing 1 - 29 1 - 31 LUMOTAST 25 Signal lamps LUMOTAST 25 Signal lamp, 24 V, Click" quick-assembly feature LUMOTAST 25 Signal lamp, 24 V, ring nut fixing 1 - 32 1 - 33 1 - 34 1-16 PUSHBUTTONS LUMOTAST 25 - ILLUMINATED PUSHBUTTONS Series LUMOTAST 25 16.2 mm mounting hole diameter 1 Mounting of Click-Version LUMO 25 ~ As delivered Insert pushbutton in hole Actuate once Insert connector with flat-ribbon cable Disassembly Click-Version from Front Side Click-Version from front (only for pushbuttons and signal lamps with special tool for dismounting) 1. Grip body/lens 2. Pull out body/lens 3. Release click lever 4. Pull out pushbutton/signal lamp with cable 1-17 PUSHBUTTONS LUMOTAST 25 - ILLUMINATED PUSHBUTTONS Dimensional drawing With quick connector and flat-ribbon cable Connection diagram (PCB top view) 1 LUMO 25 1 + 4 = pushbutton connection, 2 + 3 = lamp connection If LED is used: connection 3 = cathode With plug-in socket Plug-in socket for PCB Front panel top view PCB top view PCB hole diagram Sight on component side 1+4 contact connection 2+3 lamp connection 1-18 PUSHBUTTONS LUMOTAST 25 - ILLUMINATED PUSHBUTTONS LUMOTAST 25 Illuminated pushbuttons 1 LUMO 25 Panel cut-out Technical Data General information Form of lens Color of lens Form of collar see order block see order block square Dimensions Length of collar Width of collar Overall height Mounting depth with connector Mounting depth with plug-in socket Mounting hole 25 mm 25 mm 7.1 mm 30.7 mm 33.4 mm 16.2 mm Mechanical design Mounting Terminals Contact system Contact function Contact arrangement Contact materials Illumination Lamp socket see order block pin connector 4-pole / plug-in socket snap-action contact momentary 1 NO Au yes Bi-Pin T1 / T11/4 Mechanical characteristics Operating force max. Operating travel Switching travel Robustness max. 6N 3 mm 2 mm 100 N Electrical characteristics Rated voltage AC/DC max. Rated voltage AC/DC min. Rated current AC/DC max. Rated current AC/DC min. Contact resistance acc. to life max. Bouncing time max. 35 V 0.02 V 100 mA 0.01 mA 100 mE 5 ms Other specifications Operating life (operations) Degree of protection from front side Ambient temp. operating max. without lamp /LED Ambient temp. operating max. without lamp /LED Ambient temp. operating min. with lamp /LED Ambient temp. operating max. with lamp /LED with socket connector with PCB plug-in socket 1,000,000 IP65 (DIN EN 60529) -25 C +70 C -25 C +55 C 1-19 PUSHBUTTONS LUMOTAST 25 - ILLUMINATED PUSHBUTTONS - Technical data (continued) - LUMOTAST 25 - Illuminated pushbutton Storage temperature min. Storage temperature max. Environmental restistance Weight ROHS compliant REACH compliant 1 -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 7g yes yes Accessories LUMOTAST 25 - Illuminated pushbutton LUMO 25 1-20 Description Photo Order no. Additional accessories see page Socket Bi-Pin T 1, LED - 5-6 Socket Bi-Pin T 1, LED superbright - 5-6 Plug-in socket for PCB 5.00.645.036/0000 5 - 28 Cable (flat ribbon cable 10 cm with socket connector and male quick connector, AMP 4-pin) 5.03.771.306/0000 5 - 29 Disassembly tool for LUMOTAST 25, RAFIX 16 5.05.800.042/0000 5 - 27 Blanking cap complete with sealing disc and ring nut, square 5.05.800.049/0100 2 - 83, 5 - 23 Label holder, flush, for square collar 5.07.620.004/0000 2 - 80 Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 28 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25 Legend insert, blank, use only for transparent lenses 5.70.635.000/2000 - Legend label 23 x 16 for label holder, without legend 5.73.111.000/0000 - Socket connector, 4-pin 5.92.025.368/0000 5 - 28 PUSHBUTTONS LUMOTAST 25 - ILLUMINATED PUSHBUTTONS LUMOTAST 25 Illuminated pushbutton with flush lens, Click" quick-assembly feature 1 Technical data see page 1 - 19 LUMO 25 Panel cut-out Contact function Contact arrangement Order no. Note momentary 1 NO 1.15.150.506/0000 Please include the desired lens in your order. Note when using LEDs: A notch on the lamp socket identifies the cathode side (-). Lenses: Lens, square, Lens, square, Lens, square, Lens, square, Lens, square, transparent transparent transparent transparent transparent colorless: 5.49.077.011/1002 red: 5.49.077.011/1306 yellow: 5.49.077.011/1403 green: 5.49.077.011/1505 blue: 5.49.077.011/1607 LUMOTAST 25 Illuminated pushbutton with flush lens, ring nut fixing Technical data see page 1 - 19 Panel cut-out Contact function Contact arrangement Order no. Note momentary 1 NO 1.15.150.556/0000 Please include the desired lens in your order. Note when using LEDs: A notch on the lamp socket identifies the cathode side (-). Lenses: Lens, square, transparent colorless: 5.49.077.011/1002 1-21 PUSHBUTTONS LUMOTAST 25 - ILLUMINATED PUSHBUTTONS - Table (continued) - LUMOTAST 25 - Illuminated pushbutton with flush lens, ring nut fixing 1 Lens, Lens, Lens, Lens, square, square, square, square, transparent transparent transparent transparent red: 5.49.077.011/1306 yellow: 5.49.077.011/1403 green: 5.49.077.011/1505 blue: 5.49.077.011/1607 LUMOTAST 25 Illuminated pushbutton with protruding lens, Click" quick-assembly feature LUMO 25 Technical data see page 1 - 19 Panel cut-out Contact function Contact arrangement Order no. Note momentary 1 NO 1.15.150.606/0000 Please include the desired lens in your order. Note when using LEDs: A notch on the lamp socket identifies the cathode side (-). Lenses: Lens, square, Lens, square, Lens, square, Lens, square, Lens, square, 1-22 transparent transparent transparent transparent transparent colorless: 5.49.077.012/1002 red: 5.49.077.012/1306 yellow: 5.49.077.012/1403 green: 5.49.077.012/1505 blue: 5.49.077.012/1607 PUSHBUTTONS LUMOTAST 25 - ILLUMINATED PUSHBUTTONS LUMOTAST 25 Illuminated pushbutton with protruding lens, ring nut fixing 1 Technical data see page 1 - 19 LUMO 25 Panel cut-out Contact function Contact arrangement Order no. Note momentary 1 NO 1.15.150.656/0000 Please include the desired lens in your order. Note when using LEDs: A notch on the lamp socket identifies the cathode side (-). Lenses: Lens, square, Lens, square, Lens, square, Lens, square, Lens, square, transparent transparent transparent transparent transparent colorless: 5.49.077.012/1002 red: 5.49.077.012/1306 yellow: 5.49.077.012/1403 green: 5.49.077.012/1505 blue: 5.49.077.012/1607 1-23 PUSHBUTTONS LUMOTAST 25 - SELECTOR SWITCHES LUMOTAST 25 Selector switches 1 LUMO 25 Panel cut-out Technical Data 1-24 General information Actuator Color of handle Form of collar handle black opaque square Dimensions Length of collar Width of collar Overall height Mounting depth with connector Mounting depth with plug-in socket Mounting hole 25 mm 25 mm 17 mm 30.7 mm 33.4 mm 16.2 mm Mechanical design Mounting Terminals Contact system Contact function Contact arrangement Contact materials Illumination see order block pin connector 4-pole / plug-in socket snap-action contact see order block 1 NO Au no Mechanical characteristics Operating force min. Rotating angle Operating force max. 0.03 Nm see order block 1.5 N Electrical characteristics Rated voltage AC/DC max. Rated voltage AC/DC min. Rated current AC/DC max. Rated current AC/DC min. Contact resistance acc. to life max. Bouncing time max. 35 V 0.02 V 100 mA 0.01 mA 100 mE 5 ms Other specifications Operating life (operations) Degree of protection from front side Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Weight ROHS compliant REACH compliant 500,000 IP65 (DIN EN 60529) -25 C +70 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 8g yes yes PUSHBUTTONS LUMOTAST 25 - SELECTOR SWITCHES Accessories LUMOTAST 25 - Selector switch Description Photo Order no. Additional accessories see page Plug-in socket for PCB 5.00.645.036/0000 5 - 28 Cable (flat ribbon cable 10 cm with socket connector and male quick connector, AMP 4-pin) 5.03.771.306/0000 5 - 29 Blanking cap complete with sealing disc and ring nut, square 5.05.800.049/0100 2 - 83, 5 - 23 Label holder, flush, for square collar 5.07.620.004/0000 2 - 80 Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 28 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25 Socket connector, 4-pin 5.92.025.368/0000 5 - 28 1 LUMO 25 LUMOTAST 25 Selector switch, ring nut fixing Technical data see page 1 - 24 Panel cut-out Contact arrangement Contact function Rotating angle Actuator Order no. 1 NO latching right, 1 x 90 handle 1.15.153.106/0100 1-25 PUSHBUTTONS LUMOTAST 25 - KEYLOCK SWITCHES LUMOTAST 25 Keylock switches 1 LUMO 25 Panel cut-out The locking systems we use are created according to DIN EN 1303 by leading lock manufacturers. They are are open, mechanical systems that require occasional maintenance of the machinery or plant operator depending on environmental conditions. Technical Data 1-26 General information Color of lens Form of collar black opaque square Dimensions Length of collar Width of collar Overall height Mounting depth with connector Mounting depth with plug-in socket Mounting hole 25 mm 25 mm 32.3 mm 30.7 mm 33.4 mm 16.2 mm Mechanical design Mounting Terminals Contact system Contact function Contact arrangement Contact materials Illumination Lamp socket Lock Wafers Lock type Number of locking positions Main key Symmetric key Key removal position ring nut pin connector 4-pol./ plug-in socket snap-action contact latching 1 NO Au no no cylinder lock 8 pins 5201 10,000 yes yes see order block Mechanical characteristics Operating force max. Rotating angle 1.5 N 90 Electrical characteristics Rated voltage AC/DC max. Rated voltage AC/DC min. Rated current AC/DC max. Rated current AC/DC min. Contact resistance acc. to life max. Bouncing time max. 35 V 0.02 V 100 mA 0.01 mA 100 mE 5 ms Other specifications Operating life (operations) Degree of protection from front side Operation temperature min. 50,000 IP65 (DIN EN 60529) -25 C PUSHBUTTONS LUMOTAST 25 - KEYLOCK SWITCHES - Technical data (continued) - LUMOTAST 25 - Keylock switch Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Weight ROHS compliant REACH compliant +70 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 20 g yes yes Accessories LUMOTAST 25 - Keylock switch Description Photo Order no. Additional accessories see page Plug-in socket for PCB 5.00.645.036/0000 5 - 28 Cable (flat ribbon cable 10 cm with socket connector and male quick connector, AMP 4-pin) 5.03.771.306/0000 5 - 29 Blanking cap complete with sealing disc and ring nut, square 5.05.800.049/0100 2 - 83, 5 - 23 Label holder, flush, for square collar 5.07.620.004/0000 2 - 80 Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 28 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25 Spare key set (2 keys) 5.58.015.201/0000 - Legend label 23 x 16 for label holder, without legend 5.73.111.000/0000 - Socket connector, 4-pin 5.92.025.368/0000 5 - 28 1-27 1 LUMO 25 PUSHBUTTONS LUMOTAST 25 - KEYLOCK SWITCHES LUMOTAST 25 Keylock switch Technical data see page 1 - 26 1 LUMO 25 Panel cut-out Contact arrange- Contact func- Rotating angle ment tion Key removal positi- Color of lens on Order no. 1 NO latching 90 0 black opaque 1.15.156.001/0000 1 NO latching 90 0+1 black opaque 1.15.156.011/0000 Included: 2 keys. 1-28 PUSHBUTTONS LUMOTAST 25 - EMERGENCY STOP PUSHBUTTONS LUMOTAST 25 Emergency stop pushbuttons 1 LUMO 25 Panel cut-out Original manual see Appendix" Technical Data General information Color of lens Form of collar Color of collar opaque red square see order block Dimensions Length of collar Width of collar Overall height Mounting depth with connector Mounting depth with plug-in socket Mounting hole 25 mm 25 mm 18.5 mm 30.7 mm 33.4 mm 16.2 mm Mechanical design Mounting Terminals Contact system Contact function Contact arrangement Contact materials Illumination Reset ring nut pin connector 4-pole / plug-in socket snap-action contact latching 2 NC (forcibly actuated) Au no by pulling Mechanical characteristics Operating force max. Operating travel Switching travel Robustness max. 10 N 2.6 mm 2 mm 100 N Electrical characteristics Rated voltage AC/DC max. Rated voltage AC/DC min. Rated current AC/DC max. Rated current AC/DC min. Contact resistance acc. to life max. Bouncing time max. 25 V 0.02 V 100 mA (1A short-circuit current) 0.01 mA 100 mE 10 ms Other specifications Operating life (operations) Degree of protection from front side Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance 15,000 IP65 (DIN EN 60529) -25 C +70 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 Approvals IEC 60947-5-x, 60204, 60073 UL 9ZX6 1-29 PUSHBUTTONS LUMOTAST 25 - EMERGENCY STOP PUSHBUTTONS - Technical data (continued) - LUMOTAST 25 - Emergency stop pushbutton Weight ROHS compliant REACH compliant 1 9g yes yes Accessories LUMOTAST 25 - Emergency stop pushbutton LUMO 25 1-30 Description Photo Order no. Additional accessories see page Plug-in socket for PCB 5.00.645.036/0000 5 - 28 Cable (flat ribbon cable 10 cm with socket connector and male quick connector, AMP 4-pin) 5.03.771.306/0000 5 - 29 Blanking cap complete with sealing disc and ring nut, square 5.05.800.049/0100 2 - 83, 5 - 23 Label holder, flush, for square collar 5.07.620.004/0000 2 - 80 Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 28 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25 Legend label 23 x 16 for label holder, without legend 5.73.111.000/0000 - Adhesive label yellow, round 16.1 / 60 mm, without legend 5.76.204.425/0400 - Adhesive label yellow, round 16.1 / 60 mm, with legend Not-Aus" 5.76.204.426/0400 - Adhesive label yellow, round 16.1 / 60 mm, with legend ARRET-D`URGENCE" 5.76.204.427/0400 - Adhesive label yellow, round 16.1 / 60 mm, with legend EMERGENCY-STOP" 5.76.204.428/0400 - Adhesive label yellow, round 16.1 / 60 mm, with legend ARRESTO-D`EMERGENZA" 5.76.204.429/0400 - Socket connector, 4-pin 5.92.025.368/0000 5 - 28 PUSHBUTTONS LUMOTAST 25 - EMERGENCY STOP PUSHBUTTONS LUMOTAST 25 Emergency stop pushbutton, ring nut fixing 1 Technical data see page 1 - 29 LUMO 25 Panel cut-out Contact function Contact arrangement Color of collar Order no. latching 2 NC (forcibly actuated) yellow 1.15.154.016/0301 latching 2 NC (forcibly actuated) black 1.15.154.006/0301 Original operating instructions see appendix. 1-31 PUSHBUTTONS LUMOTAST 25 - SIGNAL LAMPS LUMOTAST 25 Signal lamps 1 LUMO 25 Panel cut-out Technical Data General information Form of lens Color of lens square see order block Dimensions Length of collar Width of collar Overall height Mounting depth with connector Mounting depth with plug-in socket Mounting hole 25 mm 25 mm 9.8 mm 30.7 mm 33.4 mm 16.2 mm Mechanical design Mounting Terminals Lamp socket Lamp see order block pin connector 4-pole / plug-in socket Bi-Pin T1 / T11/4 filament lamp / LED Electrical characteristics Voltage limit max. Power limit max. 24 V 0.7 W Other specifications Degree of protection from front side Weight Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance ROHS compliant REACH compliant IP65 (DIN EN 60529) 7g -25 C +70 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 yes yes Accessories LUMOTAST 25 - Signal lamp Description Order no. Additional accessories see page Socket Bi-Pin T 1, LED - 5-6 Socket Bi-Pin T 1, LED superbright - 5-6 Plug-in socket for PCB 1-32 Photo 5.00.645.036/0000 5 - 28 PUSHBUTTONS LUMOTAST 25 - SIGNAL LAMPS - Table (continued) - Accessories LUMOTAST 25 - Signal lamp Description Photo Order no. Additional accessories see page Cable (flat ribbon cable 10 cm with socket connector and male quick connector, AMP 4-pin) 5.03.771.306/0000 5 - 29 Disassembly tool for LUMOTAST 25, RAFIX 16 5.05.800.042/0000 5 - 27 Blanking cap complete with sealing disc and ring nut, square 5.05.800.049/0100 2 - 83, 5 - 23 Label holder, flush, for square collar 5.07.620.004/0000 2 - 80 Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 28 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25 Legend insert, blank, use only for transparent lenses 5.70.635.000/2000 - Legend label 23 x 16 for label holder, without legend 5.73.111.000/0000 - Socket connector, 4-pin 5.92.025.368/0000 5 - 28 1 LUMO 25 LUMOTAST 25 Signal lamp, 24 V, Click" quick-assembly feature Technical data see page 1 - 32 Panel cut-out Voltage limit max. Power limit max. Lamp socket Order no. Note 24 V 0.7 W Bi-Pin T1 / T11/4 1.65.122.906/0000 Please include the desired lens in your order. Do not press in lens in disassembled condition. Please note when using a LED: A notch on the lamp identifies the cathode side (-). Lenses: Lens, square, Lens, square, Lens, square, Lens, square, Lens, square, transparent transparent transparent transparent transparent colorless: 5.49.077.014/1002 red: 5.49.077.014/1306 yellow: 5.49.077.014/1403 green: 5.49.077.014/1505 blue: 5.49.077.014/1607 1-33 PUSHBUTTONS LUMOTAST 25 - SIGNAL LAMPS LUMOTAST 25 Signal lamp, 24 V, ring nut fixing Technical data see page 1 - 32 1 LUMO 25 Panel cut-out Voltage limit max. Power limit max. Lamp socket Order no. Note 24 V 0.7 W Bi-Pin T1 / T11/4 1.65.122.956/0000 Please include the desired lens in your order. Please note when using LED: A notch on the lamp socket identifies the cathode side (-). Lenses: Lens, square, Lens, square, Lens, square, Lens, square, Lens, square, 1-34 transparent transparent transparent transparent transparent colorless: 5.49.077.014/1002 red: 5.49.077.014/1306 yellow: 5.49.077.014/1403 green: 5.49.077.014/1505 blue: 5.49.077.014/1607 PUSHBUTTONS LUMOTAST 75 IP40 1 LUMO 75 (40) LUMOTAST 75 IP40 LUMOTAST 75 IP40 - Pushbutton range Illuminated pushbuttons, signal lamps and keylock switches s Mounting hole diameter 16.2 mm s Degree of protection IP40 acc. DIN EN 60529 s Solder terminals for the following wire cross-sections: - Installed 0.5 mm2 max. - Factory terminated 0.35 mm2 max. s 250 V/4 A max. s 2 NC + 2 NO max. s Lamp socket T 4.5 s Illumination: LED / filament lamp s All products are RoHS compliant. 1-35 PUSHBUTTONS LUMOTAST 75 IP40 Content 1 LUMOTAST 75 IP40 Illuminated pushbuttons LUMOTAST 75 IP40 Illuminated pushbutton, protruding lens, round collar LUMOTAST 75 IP40 Illuminated pushbutton, flush lens, square collar LUMOTAST 75 IP40 Illuminated pushbutton, protruding lens, square collar LUMOTAST 75 IP40 Illuminated pushbutton, flush lens, rectangular collar 1 1 1 1 1 LUMOTAST 75 IP40 Keylock switches LUMOTAST 75 IP40 Keylock switch, round collar LUMOTAST 75 IP40 Keylock switch, rectangular collar 1 - 42 1 - 43 1 - 44 LUMOTAST 75 IP40 Signal lamps with lamp socket T 4.5 LUMOTAST 75 IP40 Signal lamp with lamp socket T 4.5, round collar, protruding lens LUMOTAST 75 IP40 Signal lamp, square collar, flush lens LUMOTAST 75 IP40 Signal lamp, square collar, protruding lens LUMOTAST 75 IP40 Signal lamp, rectangular collar, flush lens 1 1 1 1 1 LUMO 75 (40) 1-36 - - 37 39 39 40 41 45 46 47 47 48 PUSHBUTTONS LUMOTAST 75 IP40 - ILLUMINATED PUSHBUTTONS LUMOTAST 75 IP40 Illuminated pushbuttons 1 LUMO 75 (40) Mounting hole Technical Data General information Form of lens Form of collar Color of collar see order block see order block see order block Dimensions Length of collar Width of collar Diameter of collar Overall height Mounting depth Mounting hole see order block see order block see order block 7.5 mm 41.5/49.5/57.5 mm 16.2 mm Mechanical design Mounting Terminals Contact system Contact function Contact arrangement Contact materials Illumination Lamp socket ring nut solder terminals snap-action bridge contact see order block see order block Ag LED T 4.5 Mechanical characteristics Operating force max. Operating travel Switching travel NC Switching travel NO Robustness max. 3 ... 6.5 N 2.7 mm 1.6 mm 0.9 mm 100 N Electrical characteristics Rated voltage AC max. Rated voltage DC max. Rated voltage AC/DC min. Rated current AC max. Rated current DC max. Rated current AC/DC min. Contact resistance acc. to life max. Protection class ESD-strength min. 250 V 230 V 12 V 4A 0.2 A 5 mA 200 mE II 14 kV Other specifications Operating life, at 250 V/2 A (operations) Operating life, at 250 V/4 A (operations) Degree of protection from front side Operation temperature min. Ambient temp. operating max. without lamp /LED Approvals ENEC 25T70 without lamp, 25T55 with lamp UL 508 C22.2 No. 14-M91 200,000 (momentary) 60,000 (momentary), 10,000 (latching) IP40 (DIN EN 60529) -25 C +70 C 1-37 PUSHBUTTONS LUMOTAST 75 IP40 - ILLUMINATED PUSHBUTTONS - Technical data (continued) - LUMOTAST 75 IP40 - Illuminated pushbutton Ambient temp. operating max. with lamp /LED Storage temperature min. Storage temperature max. Environmental restistance Flame class acc. to UL 94 Hot wire ignition acc. to IEC 60695-2-1 ROHS compliant REACH compliant 1 +55 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 V1 yes yes yes Accessories LUMOTAST 75 IP40 - Illuminated pushbutton LUMO 75 (40) 1-38 Description Photo Order no. Additional accessories see page Socket T 4.5, LED - 5-7 Socket T 4.5, LED superbright - 5-7 Lamp extractor for lamp diameter 4 mm 1.90.900.002/0000 5 - 26 Lamp extractor for lamp diameter 5-6 mm 1.90.900.004/0000 5 - 26 Blanking cap, black, to cover spare holes, dimensions 18 x 18 mm 5.52.006.020/0103 5 - 22 Blanking cap, black, to cover spare holes, dimensions 18 x 24 mm 5.52.006.021/0100 5 - 22 Blanking cap, black, to cover spare holes, round 18 mm 5.52.006.022/0100 5 - 22 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25 PUSHBUTTONS LUMOTAST 75 IP40 - ILLUMINATED PUSHBUTTONS LUMOTAST 75 IP40 Illuminated pushbutton, protruding lens, round collar 1 Technical data see page 1 - 37 Mounting hole Contact arrangement Contact function Color of collar Order no. 1 NC + 1 NO momentary black 1.15.108.451/0000 1 NC + 1 NO latching black 1.15.108.551/0000 2 NC + 2 NO momentary black 1.15.108.452/0000 2 NC + 2 NO latching black 1.15.108.552/0000 LUMO 75 (40) Note Please include the desired lens and diffuser in your order. Please include the desired lens and diffuser in your order. Please include the desired lens and diffuser in your order. Please include the desired lens and diffuser in your order. Lenses: Lens, round, transparent colorless, for LED: 5.49.257.011/1002 Lens, round, transparent red, for LED: 5.49.257.011/1301 Lens, round, transparent yellow, for LED: 5.49.257.011/1402 Lens, round, transparent green, for LED: 5.49.257.011/1503 Diffuser, round, for LED, without legend: 5.72.050.000/0214 LUMOTAST 75 IP40 Illuminated pushbutton, flush lens, square collar Technical data see page 1 - 37 Mounting hole Contact arrangement Contact function Color of collar Order no. 1 NC + 1 NO momentary black 1.15.108.251/0000 1 NC + 1 NO latching black 1.15.108.351/0000 Note Please include the desired lens and diffuser in your order. Please include the desired lens and diffuser in your order. 1-39 PUSHBUTTONS LUMOTAST 75 IP40 - ILLUMINATED PUSHBUTTONS - Table (continued) - LUMOTAST 75 IP40 - Illuminated pushbutton, flush lens, square collar 1 Contact arrangement Contact function Color of collar Order no. 2 NC + 2 NO momentary black 1.15.108.252/0000 2 NC + 2 NO latching black 1.15.108.352/0000 Note Please include the desired lens and diffuser in your order. Please include the desired lens and diffuser in your order. Lenses: Lens, square, transparent colorless, for LED: 5.49.275.036/1002 Lens, square, transparent red, for LED: 5.49.275.036/1301 Lens, square, transparent yellow, for LED: 5.49.275.036/1402 Lens, square, transparent green, for LED: 5.49.275.036/1503 Diffuser, square, for LED, without legend: 5.73.013.000/0214 LUMO 75 (40) Accessoires: LUMOTAST 75 IP40 - Protective cap for 18 x 18 collar: 5.05.800.030/0000 LUMOTAST 75 IP40 - Sealing cap for protection class IP 65, for 18 x 18 collar: 5.05.200.009/0000 LUMOTAST 75 IP40 Illuminated pushbutton, protruding lens, square collar Technical data see page 1 - 37 Mounting hole Contact arrangement Contact function Color of collar Order no. 1 NC + 1 NO momentary black 1.15.108.256/0000 1 NC + 1 NO latching black 1.15.108.356/0000 2 NC + 2 NO momentary black 1.15.108.257/0000 2 NC + 2 NO latching black 1.15.108.357/0000 Note Please include the desired lens and diffuser in your order. Please include the desired lens and diffuser in your order. Please include the desired lens and diffuser in your order. Please include the desired lens and diffuser in your order. Lenses: Lens, square, transparent colorless, for LED: 5.49.275.036/1002 Lens, square, transparent red, for LED: 5.49.275.036/1301 Lens, square, transparent yellow, for LED: 5.49.275.036/1402 Lens, square, transparent green, for LED: 5.49.275.036/1503 Diffuser, square, for LED, without legend: 5.73.013.000/0214 Accessoires: LUMOTAST 75 IP40 - Protective cap for 18 x 18 collar: 5.05.800.030/0000 LUMOTAST 75 IP40 - Sealing cap for protection class IP 65, for 18 x 18 collar: 5.05.200.009/0000 1-40 PUSHBUTTONS LUMOTAST 75 IP40 - ILLUMINATED PUSHBUTTONS LUMOTAST 75 IP40 Illuminated pushbutton, flush lens, rectangular collar 1 Technical data see page 1 - 37 Panel cut-out Contact arrangement Contact function Color of collar Order no. 1 NC + 1 NO momentary black 1.15.108.051/0000 1 NC + 1 NO latching black 1.15.108.151/0000 2 NC + 2 NO momentary black 1.15.108.052/0000 2 NC + 2 NO latching black 1.15.108.152/0000 LUMO 75 (40) Note Please include the desired lens and diffuser in your order. Please include the desired lens and diffuser in your order. Please include the desired lens and diffuser in your order. Please include the desired lens and diffuser in your order. Lenses: Lens, rectangular, transparent colorless, for LED: 5.49.275.032/1002 Lens, rectangular, transparent red, for LED: 5.49.275.032/1301 Lens, rectangular, transparent yellow, for LED: 5.49.275.032/1402 Lens, rectangular, transparent green, for LED: 5.49.275.032/1503 Diffuser, rectangular, for LED, without legend: 5.73.012.000/0214 Accessoires: LUMOTAST 75 IP40 - Protective cap for 18 x 24 collar: 5.05.800.027/0000 LUMOTAST 75 IP40 -Sealing cap for protection class IP65, for 18 x 24 collar: 5.05.200.008/0000 1-41 PUSHBUTTONS LUMOTAST 75 IP40 - KEYLOCK SWITCHES LUMOTAST 75 IP40 Keylock switches 1 Mounting hole LUMO 75 (40) The locking systems we use are created according to DIN EN 1303 by leading lock manufacturers. They are are open, mechanical systems that require occasional maintenance of the machinery or plant operator depending on environmental conditions. Technical Data Approvals ENEC 25T70 UL 508 C22.2 No. 14-M91 1-42 General information Form of lens Color of collar Form of collar see order block see order block see order block Dimensions Length of collar Diameter of collar Width of collar Overall height (without key) Mounting depth Mounting hole see order block see order block see order block 7.5 mm see order block 16.2 mm Mechanical design Mounting Terminals Contact system Contact function Contact arrangement Contact materials Illumination Lock Wafers Lock type Number of locking positions Main key Symmetric key Key removal position ring nut solder terminals snap-action bridge contact see order block see order block Ag no cylinder lock 4 pins 1D 21 45 no no see order block Mechanical characteristics Rotating angle see order block Electrical characteristics Rated voltage AC max. Rated voltage DC max. Rated voltage AC/DC min. Rated current AC max. Rated current DC max. Rated current AC/DC min. Contact resistance acc. to life max. ESD-strength min. 250 V 230 V 12 V 4A 0,2 A 5 mA 200 mE 14 kV Other specifications Operating life, at 250 V/2 A (operations) Operating life, at 250 V/4 A (operations) Degree of protection from front side 50,000 (momentary) 50,000 (momentary) IP40 (DIN EN 60529) PUSHBUTTONS LUMOTAST 75 IP40 - KEYLOCK SWITCHES - Technical data (continued) - LUMOTAST 75 IP40 - Keylock switch Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Weight Flame class acc. to UL 94 Hot wire ignition acc. to IEC 60695-2-1 ROHS compliant REACH compliant -25 C +70 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 35 g V1 yes yes yes Accessories LUMOTAST 75 IP40 - Keylock switch Description Photo Order no. Additional accessories see page Blanking cap, black, to cover spare holes, dimensions 18 x 24 mm 5.52.006.021/0100 5 - 22 Blanking cap, black, to cover spare holes, round 18 mm 5.52.006.022/0100 5 - 22 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25 Keylock switch cap 5.58.002.030/0000 - LUMOTAST 75 - Spare key (1 piece) 5.58.004.721/0000 - LUMOTAST 75 IP40 Keylock switch, round collar Technical data see page 1 - 42 Mounting hole Contact arrangement Contact function Rotating angle Key removal position Color of collar Order no. 1 NC + 1 NO momentary 45 0 black 1.15.108.941/0000 1 NC + 1 NO latching 90 0 black 1.15.108.851/0000 1-43 1 LUMO 75 (40) PUSHBUTTONS LUMOTAST 75 IP40 - KEYLOCK SWITCHES - Table (continued) - LUMOTAST 75 IP40 - Keylock switch, round collar 1 Contact arrangement Contact function Rotating angle Key removal position Color of collar Order no. 1 NC + 1 NO latching 90 0+1 black 1.15.108.911/0000 2 NC + 2 NO latching 90 0 black 1.15.108.852/0000 2 NC + 2 NO latching 90 0+1 black 1.15.108.912/0000 Included: 2 keys. Other lock variants and contact arrangements available on request. LUMO 75 (40) LUMOTAST 75 IP40 Keylock switch, rectangular collar Technical data see page 1 - 42 Panel cut-out Contact arrangement Contact function Rotating angle Key removal position Color of collar Order no. 1 NC + 1 NO momentary 45 0 black 1.15.108.661/0100 1 NC + 1 NO latching 90 0 black 1.15.108.571/0100 1 NC + 1 NO latching 90 0+1 black 1.15.108.631/0100 2 NC + 2 NO latching 90 0 black 1.15.108.572/0100 2 NC + 2 NO latching 90 0+1 black 1.15.108.632/0100 Included: 2 keys. Other lock variants and contact arrangements available on request. 1-44 PUSHBUTTONS LUMOTAST 75 IP40 - SIGNAL LAMPS WITH LAMP SOCKET T 4.5 LUMOTAST 75 IP40 Signal lamps with lamp socket T 4.5 1 LUMO 75 (40) Mounting hole Technical Data General information Form of lens Form of collar Color of collar see order block see order block see order block Dimensions Length of collar Width of collar Diameter of collar Overall height Mounting depth Mounting hole see order block see order block see order block 7.5 mm 33.5 mm 16.2 mm Mechanical design Mounting Terminals Lamp socket Illumination ring nut solder terminals T 4.5 LED / filament lamp Electrical characteristics Voltage limit max. Power limit max. 35 V 1.2 W Other specifications Degree of protection from front side Weight Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance ROHS compliant REACH compliant IP40 (DIN EN 60529) 5g -25 C +55 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 yes yes Approvals IEC 61058 UL 508 C22.2 No. 14-M91 Accessories LUMOTAST 75 IP40 - Signal lamp with lamp socket T 4.5 Description Photo Order no. Additional accessories see page Socket T 4.5, LED - 5-7 Socket T 4.5, LED superbright - 5-7 1-45 PUSHBUTTONS LUMOTAST 75 IP40 - SIGNAL LAMPS WITH LAMP SOCKET T 4.5 - Table (continued) - Accessories LUMOTAST 75 IP40 - Signal lamp with lamp socket T 4.5 1 Description Photo Order no. Additional accessories see page Blanking cap, black, to cover spare holes, dimensions 18 x 18 mm 5.52.006.020/0103 5 - 22 Blanking cap, black, to cover spare holes, dimensions 18 x 24 mm 5.52.006.021/0100 5 - 22 Blanking cap, black, to cover spare holes, round 18 mm 5.52.006.022/0100 5 - 22 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25 LUMO 75 (40) LUMOTAST 75 IP40 Signal lamp with lamp socket T 4.5, round collar, protruding lens Technical data see page 1 - 45 Mounting hole Voltage limit max. Power limit max. Lamp socket Color of collar Order no. Note 35 V T 4.5 Please include the desired lens and diffuser in your order. 1.2 W black Lenses: Lens, round, transparent colorless, for LED: 5.49.257.011/1002 Lens, round, transparent red, for LED: 5.49.257.011/1301 Lens, round, transparent yellow, for LED: 5.49.257.011/1402 Lens, round, transparent green, for LED: 5.49.257.011/1503 Diffuser, round, for LED, without legend: 5.72.050.000/0214 1-46 1.65.111.071/0000 PUSHBUTTONS LUMOTAST 75 IP40 - SIGNAL LAMPS WITH LAMP SOCKET T 4.5 LUMOTAST 75 IP40 Signal lamp, square collar, flush lens 1 Technical data see page 1 - 45 Mounting hole Voltage limit max. Power limit max. 35 V 1.2 W Lamp socket Color of collar Order no. Note T 4.5 Please include the desired lens and diffuser in your order. black 1.65.111.061/0000 LUMO 75 (40) Lenses: Lens, square, transparent colorless, for LED: 5.49.275.036/1002 Lens, square, transparent red, for LED: 5.49.275.036/1301 Lens, square, transparent yellow, for LED: 5.49.275.036/1402 Lens, square, transparent green, for LED: 5.49.275.036/1503 Diffuser, square, for LED, without legend: 5.73.013.000/0214 LUMOTAST 75 IP40 Signal lamp, square collar, protruding lens Technical data see page 1 - 45 Mounting hole Voltage limit max. Power limit max. Lamp socket Color of collar Order no. Note 35 V T 4.5 Please include the desired lens and diffuser in your order. Lenses: Lens, square, Lens, square, Lens, square, Lens, square, 1.2 W black 1.65.111.081/0000 transparent colorless, for LED: 5.49.275.036/1002 transparent red, for LED: 5.49.275.036/1301 transparent yellow, for LED: 5.49.275.036/1402 transparent green, for LED: 5.49.275.036/1503 1-47 PUSHBUTTONS LUMOTAST 75 IP40 - SIGNAL LAMPS WITH LAMP SOCKET T 4.5 - Table (continued) - LUMOTAST 75 IP40 - Signal lamp, square collar, protruding lens Diffuser, square, for LED, without legend: 5.73.013.000/0214 1 Accessoires: LUMOTAST 75 IP40 - Sealing cap for protection class IP 65, for 18 x 18 collar: 5.05.200.009/0000 LUMOTAST 75 IP40 Signal lamp, rectangular collar, flush lens Technical data see page 1 - 45 LUMO 75 (40) Panel cut-out Voltage limit max. Power limit max. Lamp socket Color of collar Order no. Note 35 V T 4.5 Please include the desired lens and diffuser in your order. 1.2 W black 1.65.111.051/0000 Lenses: Lens, rectangular, transparent colorless, for LED: 5.49.275.032/1002 Lens, rectangular, transparent red, for LED: 5.49.275.032/1301 Lens, rectangular, transparent yellow, for LED: 5.49.275.032/1402 Lens, rectangular, transparent green, for LED: 5.49.275.032/1503 Diffuser, rectangular, for LED, without legend: 5.73.012.000/0214 Accessoires: LUMOTAST 75 IP40 -Sealing cap for protection class IP65, for 18 x 24 collar: 5.05.200.008/0000 1-48 PUSHBUTTONS LUMOTAST 75 IP65 1 LUMO 75 (65) LUMOTAST 75 IP65 LUMOTAST 75 IP65 - Pushbutton range Illuminated pushbuttons and signal lamps with lamp socket T 4.5 s Mounting hole diameter 16.2 mm s Degree of protection IP65 acc. to DIN EN 60529 s Solder terminals for the following wire cross-sections: - Installed 0.5 mm2 max. - Factory terminated 0.35 mm2 max. s 250 V/4 A max. s 2 NC + 2 NO max. s Illumination: LED / filament lamp s All products are RoHS compliant. 1-49 PUSHBUTTONS LUMOTAST 75 IP65 Content 1 LUMOTAST 75 IP65 Illuminated pushbuttons LUMOTAST 75 IP65 Illuminated pushbutton, flush lens, round collar LUMOTAST 75 IP65 Illuminated pushbutton, protruding lens, round collar LUMOTAST 75 IP65 Illuminated pushbutton, flush lens, square collar LUMOTAST 75 IP65 Illuminated pushbutton, protruding lens, square collar LUMOTAST 75 IP65 Illuminated pushbutton, flush lens, rectangular collar 1 1 1 1 1 1 - 51 53 53 54 55 55 LUMOTAST 75 IP65 Signal lamps LUMOTAST 75 IP65 Signal lamp, flush lens, round collar LUMOTAST 75 IP65 Signal lamp, protruding lens, round collar LUMOTAST 75 IP65 Signal lamp, flush lens, rectangular collar LUMOTAST 75 IP65 Signal lamp, protruding lens, square collar LUMOTAST 75 IP65 Signal lamp, flush lens, square collar 1 1 1 1 1 1 - 57 58 59 59 60 61 LUMO 75 (65) 1-50 PUSHBUTTONS LUMOTAST 75 IP65 - ILLUMINATED PUSHBUTTONS LUMOTAST 75 IP65 Illuminated pushbuttons 1 Mounting hole Technical Data LUMO 75 (65) General information Form of lens Color of lens Form of collar Color of collar see order block see order block see order block black Dimensions Length of collar Diameter of collar Width of collar Overall height Mounting depth Mounting hole see order block see order block see order block 10.5 mm see order block 16.2 mm Mechanical design Mounting Terminals Contact system Contact function Contact arrangement Contact materials Illumination Lamp socket ring nut solder terminals snap-action bridge contact see order block see order block Ag LED / filament lamp T 4.5 Mechanical characteristics Operating force Operating travel Switching travel NC Switching travel NO Robustness max. 3 ... 6.5 N 2.5 mm 1.8 mm 0.9 mm 100 N Electrical characteristics Rated voltage AC max. Rated voltage DC max. Rated voltage AC/DC min. Rated current AC max. Rated current DC max. Rated current AC/DC min. Contact resistance acc. to life max. Protection class ESD-strength min. 250 V 230 V 12 V 4A 0.2 A 5 mA 200 mE II 14 kV Other specifications Operating life, at 250 V/2 A (operations) Operating life, at 250 V/4 A (operations) Degree of protection from front side Operation temperature min. 200,000 (momentary), 50,000 (latching) 60,000 (momentary) IP65 (DIN EN 60529) -25 C Approvals ENEC 25T70 without lamp, 25T55 with lamp UL 508 C22.2 No. 14-M91 1-51 PUSHBUTTONS LUMOTAST 75 IP65 - ILLUMINATED PUSHBUTTONS - Technical data (continued) - LUMOTAST 75 IP65 - Illuminated pushbutton Ambient temp. operating max. without lamp /LED Ambient temp. operating max. with lamp /LED Storage temperature min. Storage temperature max. Environmental restistance Weight Flame class acc. to UL 94 Hot wire ignition acc. to IEC 60695-2-1 ROHS compliant REACH compliant 1 +70 C +55 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 15 g V0 yes yes yes Accessories LUMOTAST 75 IP65 - Illuminated pushbutton LUMO 75 (65) 1-52 Description Photo Order no. Additional accessories see page Socket T 4.5, LED - 5-7 Socket T 4.5, LED superbright - 5-7 Lamp extractor for lamp diameter 4 mm 1.90.900.002/0000 5 - 26 Lamp extractor for lamp diameter 5-6 mm 1.90.900.004/0000 5 - 26 Blanking cap, black, to cover spare holes, dimensions 18 x 18 mm 5.52.006.020/0103 5 - 22 Blanking cap, black, to cover spare holes, dimensions 18 x 24 mm 5.52.006.021/0100 5 - 22 Blanking cap, black, to cover spare holes, round 18 mm 5.52.006.022/0100 5 - 22 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25 PUSHBUTTONS LUMOTAST 75 IP65 - ILLUMINATED PUSHBUTTONS LUMOTAST 75 IP65 Illuminated pushbutton, flush lens, round collar 1 Technical data see page 1 - 51 Mounting hole Contact arrangement Contact function Color of collar Order no. 1 NC + 1 NO momentary black 1.15.108.481/0000 1 NC + 1 NO latching black 1.15.108.981/0000 2 NC + 2 NO momentary black 1.15.108.482/0000 2 NC + 2 NO latching black 1.15.108.982/0000 Lenses: Lens, round, Lens, round, Lens, round, Lens, round, transparent transparent transparent transparent Note Please include the desired lens in your order. Please include the desired lens in your order. Please include the desired lens in your order. Please include the desired lens in your order. LUMO 75 (65) colorless, for LED: 5.49.259.013/1002 red, for LED: 5.49.259.013/1301 yellow, for LED: 5.49.259.013/1402 green, for LED: 5.49.259.013/1503 Accessoires: Legend insert, round, without legend: 5.70.059.000/2000 LUMOTAST 75 IP65 Illuminated pushbutton, protruding lens, round collar Technical data see page 1 - 51 Mounting hole Contact arrangement Contact function Color of collar Order no. Note 1 NC + 1 NO momentary black 1.15.108.476/0000 Please include the desired lens in your order. 1-53 PUSHBUTTONS LUMOTAST 75 IP65 - ILLUMINATED PUSHBUTTONS - Table (continued) - LUMOTAST 75 IP65 - Illuminated pushbutton, protruding lens, round collar 1 Contact arrangement Contact function Color of collar Order no. 1 NC + 1 NO latching black 1.15.108.976/0000 2 NC + 2 NO momentary black 1.15.108.477/0000 2 NC + 2 NO latching black 1.15.108.977/0000 Lenses: Lens, round, Lens, round, Lens, round, Lens, round, transparent transparent transparent transparent Note Please include the desired lens in your order. Please include the desired lens in your order. Please include the desired lens in your order. colorless, for LED: 5.49.259.013/1002 red, for LED: 5.49.259.013/1301 yellow, for LED: 5.49.259.013/1402 green, for LED: 5.49.259.013/1503 Accessoires: Legend insert, round, without legend: 5.70.059.000/2000 LUMO 75 (65) LUMOTAST 75 IP65 Illuminated pushbutton, flush lens, square collar Technical data see page 1 - 51 Mounting hole Contact arrangement Contact function Color of collar Order no. 1 NC + 1 NO momentary black 1.15.108.276/0000 1 NC + 1 NO latching black 1.15.108.376/0000 2 NC + 2 NO momentary black 1.15.108.277/0000 2 NC + 2 NO latching black 1.15.108.377/0000 Lenses: Lens, square, Lens, square, Lens, square, Lens, square, transparent transparent transparent transparent colorless, for LED: 5.49.277.052/1002 red, for LED: 5.49.277.052/1301 yellow, for LED: 5.49.277.052/1402 green, for LED: 5.49.277.052/1503 Accessoires: Legend insert, square, without legend: 5.70.629.000/2000 1-54 Note Please include the desired lens in your order. Please include the desired lens in your order. Please include the desired lens in your order. Please include the desired lens in your order. PUSHBUTTONS LUMOTAST 75 IP65 - ILLUMINATED PUSHBUTTONS LUMOTAST 75 IP65 Illuminated pushbutton, protruding lens, square collar 1 Technical data see page 1 - 51 Mounting hole Contact arrangement Contact function Color of collar Order no. 1 NC + 1 NO momentary black 1.15.108.281/0000 1 NC + 1 NO latching black 1.15.108.381/0000 2 NC + 2 NO momentary black 1.15.108.282/0000 2 NC + 2 NO latching black 1.15.108.382/0000 Lenses: Lens, square, Lens, square, Lens, square, Lens, square, transparent transparent transparent transparent Note Please include the desired lens in your order. Please include the desired lens in your order. Please include the desired lens in your order. Please include the desired lens in your order. LUMO 75 (65) colorless, for LED: 5.49.277.052/1002 red, for LED: 5.49.277.052/1301 yellow, for LED: 5.49.277.052/1402 green, for LED: 5.49.277.052/1503 Accessoires: Legend insert, square, without legend: 5.70.629.000/2000 LUMOTAST 75 IP65 Illuminated pushbutton, flush lens, rectangular collar Technical data see page 1 - 51 Panel cut-out Contact arrangement Contact function Color of collar Order no. Note 1 NC + 1 NO momentary black 1.15.108.076/0000 Please include the desired lens in your order. 1-55 PUSHBUTTONS LUMOTAST 75 IP65 - ILLUMINATED PUSHBUTTONS - Table (continued) - LUMOTAST 75 IP65 - Illuminated pushbutton, flush lens, rectangular collar 1 Contact arrangement Contact function Color of collar Order no. 1 NC + 1 NO latching black 1.15.108.176/0000 2 NC + 2 NO momentary black 1.15.108.077/0000 2 NC + 2 NO latching black 1.15.108.177/0000 Lenses: Lens, rectangular, Lens, rectangular, Lens, rectangular, Lens, rectangular, transparent transparent transparent transparent colorless, for LED: 5.49.277.058/1002 red, for LED: 5.49.277.058/1301 yellow, for LED: 5.49.277.058/1402 green, for LED: 5.49.277.058/1503 Accessoires: Legend insert, rectangular without legend: 5.70.630.000/2000 LUMO 75 (65) 1-56 Note Please include the desired lens in your order. Please include the desired lens in your order. Please include the desired lens in your order. PUSHBUTTONS LUMOTAST 75 IP65 - SIGNAL LAMPS LUMOTAST 75 IP65 Signal lamps 1 Mounting hole Technical Data General information Form of lens Form of collar Diameter of collar see order block see order block see order block Dimensions Length of collar Width of collar Overall height Mounting depth Mounting hole see order block see order block 10.5 mm 33.5 mm 16.2 mm Mechanical design Mounting Terminals Lamp socket Lamp ring nut solder terminals T 4.5 LED / filament lamp Electrical characteristics Voltage limit max. Power limit max. 35 V 1.2 W Other specifications Degree of protection from front side Weight Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance ROHS compliant REACH compliant IP65 (DIN EN 60529) 5g -25 C +55 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 yes yes LUMO 75 (65) Approvals IEC 61058 UL 508 C22.2 No. 14-M91 Accessories LUMOTAST 75 IP65 - Signal lamp Description Photo Order no. Additional accessories see page Socket T 4.5, LED - 5-7 Socket T 4.5, LED superbright - 5-7 Lamp extractor for lamp diameter 4 mm 1.90.900.002/0000 5 - 26 1-57 PUSHBUTTONS LUMOTAST 75 IP65 - SIGNAL LAMPS - Table (continued) - Accessories LUMOTAST 75 IP65 - Signal lamp 1 Description Photo Order no. Additional accessories see page Lamp extractor for lamp diameter 5-6 mm 1.90.900.004/0000 5 - 26 Blanking cap, black, to cover spare holes, dimensions 18 x 18 mm 5.52.006.020/0103 5 - 22 Blanking cap, black, to cover spare holes, dimensions 18 x 24 mm 5.52.006.021/0100 5 - 22 Blanking cap, black, to cover spare holes, round 18 mm 5.52.006.022/0100 5 - 22 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25 LUMO 75 (65) LUMOTAST 75 IP65 Signal lamp, flush lens, round collar Technical data see page 1 - 57 Mounting hole Voltage limit max. Power limit max. Lamp socket Form of collar Order no. Note 35 V T 4.5 round 1.65.111.096/0000 Please include the desired lens in your order. 1.2 W For assembly, press the lens as far as possible. Lenses: Lens, round, Lens, round, Lens, round, Lens, round, transparent transparent transparent transparent colorless, for LED: 5.49.259.013/1002 red, for LED: 5.49.259.013/1301 yellow, for LED: 5.49.259.013/1402 green, for LED: 5.49.259.013/1503 Accessoires: Legend insert, round, without legend: 5.70.059.000/2000 1-58 PUSHBUTTONS LUMOTAST 75 IP65 - SIGNAL LAMPS LUMOTAST 75 IP65 Signal lamp, protruding lens, round collar 1 Technical data see page 1 - 57 Mounting hole Voltage limit max. Power limit max. 35 V 1.2 W Lamp socket T 4.5 Form of collar round Order no. Note 1.65.111.076/0000 Please include the desired lens in your order. LUMO 75 (65) For assembly, press the lens as far as possible. Lenses: Lens, round, Lens, round, Lens, round, Lens, round, transparent transparent transparent transparent colorless, for LED: 5.49.259.013/1002 red, for LED: 5.49.259.013/1301 yellow, for LED: 5.49.259.013/1402 green, for LED: 5.49.259.013/1503 Accessoires: Legend insert, round, without legend: 5.70.059.000/2000 LUMOTAST 75 IP65 Signal lamp, flush lens, rectangular collar Technical data see page 1 - 57 Panel cut-out Voltage limit max. Power limit max. Lamp socket Form of collar Order no. Note 35 V T 4.5 rectangular 1.65.111.056/0000 Please include the desired lens in your order. 1.2 W For assembly, press the lens as far as possible. 1-59 PUSHBUTTONS LUMOTAST 75 IP65 - SIGNAL LAMPS - Table (continued) - LUMOTAST 75 IP65 - Signal lamp, flush lens, rectangular collar 1 Lenses: Lens, rectangular, Lens, rectangular, Lens, rectangular, Lens, rectangular, transparent transparent transparent transparent colorless, for LED: 5.49.277.058/1002 red, for LED: 5.49.277.058/1301 yellow, for LED: 5.49.277.058/1402 green, for LED: 5.49.277.058/1503 Accessoires: Legend insert, rectangular without legend: 5.70.630.000/2000 LUMOTAST 75 IP65 Signal lamp, protruding lens, square collar Technical data see page 1 - 57 LUMO 75 (65) Mounting hole Voltage limit max. Power limit max. Lamp socket Form of collar Order no. Note 35 V T 4.5 square 1.65.111.086/0000 Please include the desired lens in your order. 1.2 W For assembly, press the lens as far as possible. Lenses: Lens, square, Lens, square, Lens, square, Lens, square, transparent transparent transparent transparent colorless, for LED: 5.49.277.052/1002 red, for LED: 5.49.277.052/1301 yellow, for LED: 5.49.277.052/1402 green, for LED: 5.49.277.052/1503 Accessoires: Legend insert, square, without legend: 5.70.629.000/2000 1-60 PUSHBUTTONS LUMOTAST 75 IP65 - SIGNAL LAMPS LUMOTAST 75 IP65 Signal lamp, flush lens, square collar 1 Technical data see page 1 - 57 Mounting hole Voltage limit max. Power limit max. 35 V 1.2 W Lamp socket T 4.5 Form of collar square Order no. Note 1.65.111.066/0000 Please include the desired lens in your order. LUMO 75 (65) For assembly, press the lens as far as possible. Lenses: Lens, square, Lens, square, Lens, square, Lens, square, transparent transparent transparent transparent colorless, for LED: 5.49.277.052/1002 red, for LED: 5.49.277.052/1301 yellow, for LED: 5.49.277.052/1402 green, for LED: 5.49.277.052/1503 Accessoires: Legend insert, square, without legend: 5.70.629.000/2000 1-61 PUSHBUTTONS OTHER KEYLOCK SWITCHES 1 Key Switches Other keylock switches Keylock switch for a mounting hole diameter of 16.2 mm s 35 V max. s 100 mA s Design matches with LUMOTAST FK and LUMOTAST 75 IP40. s All products are RoHS compliant. 1-63 PUSHBUTTONS OTHER KEYLOCK SWITCHES Content 1 Keylock switches Keylock switch round collar Keylock switch rectangular collar 1 - 65 1 - 66 1 - 67 Priority keylock switches Priority keylock switch round collar Priority keylock switch rectangular collar Keylock switch PCB plug-in socket 1 1 1 1 Key Switches 1-64 - 68 69 70 71 PUSHBUTTONS KEYLOCK SWITCHES KEYLOCK SWITCHES 1 Mounting hole The locking systems we use are created according to DIN EN 1303 by leading lock manufacturers. They are are open, mechanical systems that require occasional maintenance of the machinery or plant operator depending on environmental conditions. Technical Data General information Form of collar see order block Dimensions Length of collar Diameter of collar Width of collar Overall height Mounting depth Mounting hole see order block see order block see order block 7.5 mm 39.5 mm; with plug-in socket 41.25 mm 16.2 mm Mechanical design Mounting Terminals Contact system Contact function Contact arrangement Contact materials Illumination ring nut solder terminals sliding contact, self cleaning latching 1 NO at every switching position Au alloy no Mechanical design of lock Lock Wafers Lock type Number of locking positions Main key Symmetric key Key removal position cylinder lock with pin tumblers 5 pins 5001 10,000 on request on request see order block Mechanical characteristics Operating force min. Operating force max. 0.035 Nm 1.8 Nm Electrical characteristics Rated voltage AC/DC max. Rated voltage AC/DC min. Rated current AC/DC max. Rated current AC/DC min. ESD strength max. Insulation resistance Contact resistance max. 35 V 5V 100 mA 5 mA 12 kV 6 x 108 E 200 mE Other specifications Operating life (operations) Degree of protection from front side Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. 50,000 IP65 (DIN EN 60529) -25 C +70 C -40 C +80 C Key Switches with plug-in socket PCB hole pattern, sight on component side 1-65 PUSHBUTTONS KEYLOCK SWITCHES - Technical data (continued) - Keylock switch Environmental restistance Soldering temperature max. Soldering time max. Weight Rotating angle ROHS compliant REACH compliant 1 acc. to IEC 60068-2-14, -30, -33 and -78 350 C 3s 29 g see order block yes yes Accessories Keylock switch Key Switches Description Photo Order no. Additional accessories see page Plug-in socket for PCB mounting 5.05.510.298/0000 1 - 71 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25 Spare key (1 piece) 5.58.011.001/0000 - Keylock switch round collar Technical data see page 1 - 65 Mounting hole Contact arrangement Contact function Rotating angle Key removal position Order no. 1 NO at every switching position latching 1 x 90 0+1 1.10.118.612/0000 1 NO at every switching position latching 3 x 90 0+1+2+3 1.10.118.814/0000 1 NO at every switching position latching 2 x 90 0 1.10.118.513/0000 1 NO at every switching position latching 2 x 90 0+1+2 1.10.118.713/0000 Included: 2 keys. 1-66 PUSHBUTTONS KEYLOCK SWITCHES Keylock switch rectangular collar Technical data see page 1 - 65 1 16.20 3.50 36.00 18x24 M16.00x1 2.00 max. 8.00 7.55 10.40 Panel cut-out Contact arrangement Contact function Rotating angle Key removal position Order no. 1 NO at every switching position latching 1 x 90 0+1 1.10.118.212/0000 1 NO at every switching position latching 3 x 90 0+1+2+3 1.10.118.414/0000 1 NO at every switching position latching 2 x 90 0+1+2 1.10.118.313/0000 Key Switches Included: 2 keys. 1-67 PUSHBUTTONS PRIORITY KEYLOCK SWITCHES PRIORITY KEYLOCK SWITCHES 1 16.20 Panel cut-out Key Switches The locking systems used in our switches are produced in accordance with DIN EN 1303 by leading lock manufacturers. The locking systems in key switches are open mechanical systems, which require occasional maintenance of the machinery or plant operator, according to the ambient conditions. Technical Data with plug-in socket PCB hole pattern, sight on component side 1-68 General information Form of collar see order block Dimensions Length of collar Diameter of collar Width of collar Overall height Mounting depth Mounting hole see order block see order block see order block 7.5 mm 39.5 mm; with plug-in socket 41.25 mm 16.2 mm Mechanical design Mounting Terminals Contact system Contact function Contact arrangement Contact materials Illumination ring nut solder terminals sliding contact, self cleaning latching 1 NO at every switching position Au alloy no Mechanical design of lock Lock Wafers Lock type Number of locking positions Main key Symmetric key Key removal position cylinder lock with pin tumblers 5 pins 5001 10,000 yes yes see order block Mechanical characteristics Operating force min. Operating force max. 0.035 Nm 1.8 Nm Electrical characteristics Rated voltage AC/DC max. Rated voltage AC/DC min. Rated current AC/DC max. Rated current AC/DC min. ESD strength max. Insulation resistance Contact resistance max. 35 V 5V 100 mA 5 mA 12 kV 6 x 108 E 200 mE Other specifications PUSHBUTTONS PRIORITY KEYLOCK SWITCHES - Technical data (continued) - Priority keylock switch Operating life (operations) Degree of protection from front side Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Soldering temperature max. Soldering time max. Weight Rotating angle ROHS compliant REACH compliant 50,000 IP65 (DIN EN 60529) -25 C +70 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 350 C 3s 29 g see order block yes yes 1 Accessories Priority keylock switch Description Photo Order no. Additional accessories see page Plug-in socket for PCB mounting 5.05.510.298/0000 1 - 71 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25 Set of spare keys (4 keys) for 3 x 90 type 5.58.099.010/0000 - Set of spare keys (2 keys) for 2 x 90 type 5.58.099.011/0000 - Key Switches Priority keylock switch round collar Technical data see page 1 - 68 Mounting hole Contact arrangement Contact function Rotating angle Key removal position Order no. 1 NO at every switching position latching 3 x 90 0 1.10.119.617/0000 1 NO at every switching position latching 3 x 90 0+1+2+3 1.10.119.967/0000 1-69 PUSHBUTTONS PRIORITY KEYLOCK SWITCHES - Table (continued) - Priority keylock switch - round collar 1 Contact arrangement Contact function Rotating angle Key removal position Order no. 1 NO at every switching position latching 2 x 90 0 1.10.119.611/0000 Included with 2 x 90 type: 2 keys; with 3 x 90 type: 3 keys. Key 1 switches to lock position 1, key 2 switches to lock positions 1 and 2, etc... Priority keylock switch rectangular collar Technical data see page 1 - 68 16.20 2.00 max. 8.00 3.50 36.00 18x24 M16.00x1 Key Switches 7.55 10.40 Panel cut-out Contact arrangement Contact function Rotating angle Key removal position Order no. 1 NO at every switching position latching 3 x 90 0 1.10.119.117/0000 1 NO at every switching position latching 3 x 90 0+1+2+3 1.10.119.467/0000 1 NO at every switching position latching 2 x 90 0 1.10.119.111/0000 Included with 2 x 90 type: 2 keys; with 3 x 90 type: 3 keys. Key 1 switches to lock position 1, key 2 switches to lock positions 1 and 2, etc... 1-70 PUSHBUTTONS PRIORITY KEYLOCK SWITCHES Keylock switch PCB plug-in socket Technical data see page 1 - 68 1 PCB hole pattern, sight on component side with plug-in socket Description Order no. Plug-in socket for PCB mounting 5.05.510.298/0000 Key Switches 1-71 PUSHBUTTONS OTHER PUSHBUTTONS 1 Other Pushb. Other pushbuttons s Various pushbuttons for mounting hole diameters from 9.1 mm to 22.3 mm. s All products are RoHS compliant. 1-73 PUSHBUTTONS OTHER PUSHBUTTONS Content 1 Pushbuttons non-illuminated 9.1 mm, 24 V / 100 mA Pushbutton non-illuminated mounting hole diameter 9.1 mm, 24 V / 100 mA 1 - 75 1 - 76 Pushbuttons 9.1 mm, 24 V / 0.5 A Pushbutton mounting hole diameter 9.1 mm, 24 V / 0.5 A 1 - 77 1 - 78 Pushbuttons non-illuminated 15.2 mm, 250 V / 0.7 A Pushbutton non-illuminated mounting hole diameter 15.2 mm 1 - 79 1 - 80 Pushbuttons non-illuminated 16.2 mm, 250 V / 2 A Pushbutton non-illuminated mounting hole diameter 16.2 mm, 250 V / 2 A 1 - 81 1 - 82 Pushbuttons non-illuminated 18.2 mm, 250 V / 2 A Pushbutton non-illuminated mounting hole diameter 18.2 mm, 250 V / 2 A 1 - 83 1 - 84 Pushbuttons illuminable 20.3 mm, 250 V / 2 A Pushbutton with lamp socket BA9s (MBC/MCC), mounting hole diameter 20.3 mm, 250 V / 2 A 1 - 85 1 - 86 LUMOTAST 22 E-Stop pushbuttons, 22.3 mm LUMOTAST 22 E-Stop 1 - 87 1 - 88 Other Pushb. 1-74 PUSHBUTTONS PUSHBUTTONS NON-ILLUMINATED - MOUNTING HOLE DIAMETER 9.1 MM PUSHBUTTONS NON-ILLUMINATED 9.1 mm, 24 V / 100 mA 1 Technical Data General information Form of lens Color of lens Form of collar protruding lens see order block round Dimensions Diameter of collar Overall height Mounting depth Mounting hole 11 mm 4.5 mm 25.5 mm 9.1 mm Mechanical design Mounting Terminals Contact system Contact function Contact arrangement Contact materials Illumination Lamp socket ring nut solder terminals bridge contact momentary 1 NO Ag no no Mechanical characteristics Operating force max. Operating travel Switching travel NO Robustness max. 7N 2 mm 1.3 mm 100 N Electrical characteristics Rated voltage AC max. Rated voltage DC max. Rated current max. Contact resistance max. 24 V 24 V 0.1 A 200 mE Other specifications Operating life (operations) Degree of protection from front side Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Weight Soldering time max. Soldering temperature max. ROHS compliant REACH compliant 40,000 IP40 (DIN EN 60529) -25 C +70 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 2g 3s 350 C yes yes Other Pushb. Panel cut-out 1-75 PUSHBUTTONS PUSHBUTTONS NON-ILLUMINATED - MOUNTING HOLE DIAMETER 9.1 MM Accessories Pushbutton non-illuminated - 9.1 mm, 24 V / 100 mA 1 Description Photo Fixing spanner M 9, M 10 Order no. Additional accessories see page 5.58.002.025/0105 5 - 25 Pushbutton non-illuminated mounting hole diameter 9.1 mm, 24 V / 100 mA Technical data see page 1 - 75 Other Pushb. Panel cut-out 1-76 Contact arrangement Contact function Color of lens Order no. 1 NO momentary opaque red 1.10.107.011/0301 1 NO momentary opaque yellow 1.10.107.011/0404 1 NO momentary opaque green 1.10.107.011/0507 1 NO momentary opaque white 1.10.107.011/0205 1 NO momentary opaque black 1.10.107.011/0104 PUSHBUTTONS PUSHBUTTONS ILLUMINATED - MOUNTING HOLE DIAMETER 9.1 MM PUSHBUTTONS 9.1 mm, 24 V / 0.5 A 1 Technical Data General information Form of lens Color of lens Form of collar protruding lens see order block round Dimensions Diameter of collar Overall height Mounting depth Mounting hole 11 mm 7 mm 25 mm 9.1 mm Mechanical design Mounting Terminals Contact system Contact function Contact arrangement Contact materials Illumination Lamp socket ring nut solder terminals bridge contact momentary 1 NC + 1 NO Au see order block no Mechanical characteristics Operating force max. Operating travel Switching travel NC Switching travel NO Robustness max. 5N 1.5 mm 0.5 mm 1 mm 100 N Electrical characteristics Rated voltage AC/DC max. Rated voltage DC max. Rated current max. Contact resistance when new max. Contact resistance acc. to life max. Bouncing time max. Lamp voltage 24 V 24 V 0.5 A 50 mE 300 mE 10 ms see order block Other specifications Operating life key switch Degree of protection from front side Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Soldering temperature max. Soldering time max. Weight LED operating voltage LED forward current LED forward voltage LED reverse voltage LED reverse current LED power dissipation LED series resistor 5-7 V LED series resistor 12-14 V LED series resistor 24-28 V ROHS compliant REACH compliant 200,000 IP40 (DIN EN 60529) -25 C +70 C, LED +55 C -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 350 C 3s 3g see order block see order block see order block see order block see order block see order block see order block see order block see order block yes yes Other Pushb. Panel cut-out 1-77 PUSHBUTTONS PUSHBUTTONS ILLUMINATED - MOUNTING HOLE DIAMETER 9.1 MM Accessories Pushbutton - 9.1 mm, 24 V / 0.5 A 1 Description Photo Fixing spanner M 9, M 10 Order no. Additional accessories see page 5.58.002.025/0105 5 - 25 Pushbutton mounting hole diameter 9.1 mm, 24 V / 0.5 A Technical data see page 1 - 77 Other Pushb. Panel cut-out Contact arrangement Contact function Illumination Color of lens Order no. 1 NC + 1 NO momentary no opaque red 1.15.106.301/0313 1 NC + 1 NO momentary no opaque yellow 1.15.106.301/0410 1 NC + 1 NO momentary no opaque green 1.15.106.301/0518 1 NC + 1 NO momentary no opaque white 1.15.106.301/0214 1 NC + 1 NO momentary no opaque black 1.15.106.301/0104 1 NC + 1 NO momentary LED super bright red transparent red 1.15.106.501/1300 1 NC + 1 NO momentary LED super bright yellow transparent yellow 1.15.106.503/1400 1 NC + 1 NO momentary LED super bright green transparent green 1.15.106.502/1500 1 NC + 1 NO momentary LED super bright blue transparent blue 1.15.106.504/1600 1 NC + 1 NO momentary LED superbright white transparent white 1.15.106.505/1000 Recommended values for external series resistor for LED s 5 - 7 V = 270 E, 0.25 W s 12 - 14 V = 680 E, 0.5 W s 24 - 28 V = 1500 E, 1 W LED forward current: max. 10 mA at T = 25 C LED forward voltage: 2V at 10 mA LED reverse voltage: 5 V LED reverse current: 0,1 mA LED power dissipation: max. 120 mW at T = 50 C Contact arangement: 1-2 = NC, 3-4 = NO, X1-X2 = LED. Please note: connect plus with the LED anode, which is marked with a color point. 1-78 PUSHBUTTONS PUSHBUTTONS NON-ILLUMINATED - MOUNTING HOLE DIAMETER 15.2 MM PUSHBUTTONS NON-ILLUMINATED 15.2 mm, 250 V / 0.7 A 1 Technical Data General information Form of lens Color of lens Form of collar protruding lens see order block round Dimensions Diameter of collar Overall height Mounting depth Mounting hole 19 mm 8.2 mm 21.5 mm 15.2 mm Mechanical design Mounting Terminals Contact system Contact function Contact arrangement Contact materials Illumination Lamp socket ring nut see order block bridge contact momentary see order block Ag no no Mechanical characteristics Operating force max. Operating travel Switching travel NC Switching travel NO Robustness max. 7.5 N 3 mm 1.2 mm 2.0 mm 100 N Electrical characteristics Rated voltage AC max. Rated current max. Contact resistance when new max. Contact resistance acc. to life max. 250 V 0.7 A 50 mE 300 mE Other specifications Operating life (operations) Degree of protection from front side Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental resistance Weight Flame class acc. to UL 94 Hot wire ignition acc. to IEC 60695-2-1 ROHS compliant REACH compliant Other Pushb. Panel cut-out Approvals ENEC 25T85 25,000 IP40 acc. to DIN EN 60529 (IP65 with sealing cap) -25 C +85 C -40 C +90 C acc. to IEC 60068-2-14, -30, -33 and -78 7g V0 yes yes yes 1-79 PUSHBUTTONS PUSHBUTTONS NON-ILLUMINATED - MOUNTING HOLE DIAMETER 15.2 MM Accessories Pushbutton non-illuminated - 15.2 mm, 250 V / 0.7 A 1 Description Photo Order no. Additional accessories see page Sealing cap, transparent, for protection acc. to IP65 5.52.008.115/0000 - Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25 Pushbutton non-illuminated mounting hole diameter 15.2 mm Technical data see page 1 - 79 Other Pushb. screw terminals Contact arrangement Contact function Color of lens Terminals Order no. 1 NO momentary opaque red screw terminals 1.10.001.001/0301 1 NO momentary opaque red solder/quick connector 6.3x0.8 / 2x 2.8x0.8mm 1.10.001.011/0301 1 NO momentary opaque green screw terminals 1.10.001.001/0507 1 NO momentary opaque green solder/quick connector 6.3x0.8 / 2x 2.8x0.8mm 1.10.001.011/0507 1 NO momentary opaque white screw terminals 1.10.001.001/0205 1 NO momentary opaque white solder/quick connector 6.3x0.8 / 2x 2.8x0.8mm 1.10.001.011/0205 1 NO momentary opaque black screw terminals 1.10.001.001/0104 1 NO momentary opaque black solder/quick connector 6.3x0.8 / 2x 2.8x0.8mm 1.10.001.011/0104 1 NC momentary opaque red screw terminals 1.10.001.151/0301 1 NC momentary opaque red solder/quick connector 6.3x0.8 / 2x 2.8x0.8mm 1.10.001.161/0301 1 NC momentary opaque black screw terminals 1.10.001.151/0104 1 NC momentary opaque black solder/quick connector 6.3x0.8 / 2x 2.8x0.8mm 1.10.001.161/0104 Quick-connector 6.3 x 0.8 mm. The connector is splitted and also usable for two connectors 2.8 x 0.8 mm. 1-80 Panel cut-out PUSHBUTTONS PUSHBUTTONS NON-ILLUMINATED - MOUNTING HOLE DIAMETER 16.2 MM PUSHBUTTONS NON-ILLUMINATED 16.2 mm, 250 V / 2 A 1 Technical Data General information Form of lens Color of lens Form of collar protruding lens see order block round Dimensions Diameter of collar Overall height Mounting depth Mounting hole 20 mm 9 mm 41 mm 16.2 mm Mechanical design Mounting Terminals Contact system Contact function Contact arrangement Contact materials Illumination Lamp socket ring nut screw terminals bridge contact momentary see order block Ag no no Mechanical characteristics Operating force max. Operating travel Switching travel NC Switching travel NO Robustness max. 7.5 N 4.3 mm 1.3 mm 2.2 mm 100 N Electrical characteristics Rated voltage AC max. Rated current max. Contact resistance when new max. 250 V 2A 100 mE Other specifications Operating life (operations) Degree of protection from front side Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Weight Flame class acc. to UL 94 Hot wire ignition acc. to IEC 60695-2-1 ROHS compliant REACH compliant Other Pushb. Panel cut-out Approvals 150,000 IP40 acc. to DIN EN 60529 (IP65 with sealing cap) -25 C +85 C -40 C +90 C acc. to IEC 60068-2-14, -30, -33 and -78 11 g V0 yes yes yes Accessories Pushbutton non-illuminated - 16.2 mm, 250 V / 2 A Description Sealing cap, black, for protection acc. to IP65 Photo Order no. 5.52.008.101/0100 Additional accessories see page - 1-81 PUSHBUTTONS PUSHBUTTONS NON-ILLUMINATED - MOUNTING HOLE DIAMETER 16.2 MM - Table (continued) - Accessories Pushbutton non-illuminated - 16.2 mm, 250 V / 2 A 1 Description Photo Order no. Additional accessories see page Sealing cap, red, for protection acc. to IP65 5.52.008.101/0300 - Protective sleeve for terminals 5.52.011.026/0100 - Protection against contact to VBG 4 5.55.101.715/0200 5 - 31 Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25 Pushbutton non-illuminated mounting hole diameter 16.2 mm, 250 V / 2 A Technical data see page 1 - 81 Other Pushb. Panel cut-out 1-82 Contact arrangement Contact function Color of lens Order no. 1 NO momentary opaque red 1.10.102.001/0301 1 NO momentary opaque green 1.10.102.001/0507 1 NO momentary opaque white 1.10.102.001/0205 1 NO momentary opaque black 1.10.102.001/0104 1 NC momentary opaque red 1.10.102.011/0301 1 NC momentary opaque black 1.10.102.011/0104 PUSHBUTTONS PUSHBUTTONS NON-ILLUMINATED - MOUNTING HOLE DIAMETER 18.2 MM PUSHBUTTONS NON-ILLUMINATED 18.2 mm, 250 V / 2 A 1 Technical Data General information Form of lens Color of lens Form of collar protruding lens see order block round Dimensions Diameter of collar Overall height Mounting depth Mounting hole 22 mm 10.5 mm 34 mm 18.2 mm Mechanical design Mounting Terminals Contact system Contact function Contact arrangement Contact materials Illumination Lamp socket ring nut see order block sliding bridge contact momentary see order block Ag no no Mechanical characteristics Operating force max. Operating travel Switching travel NC Switching travel NO Robustness max. 9.5 N 5 mm 2.1 mm 3.7 mm 100 N Electrical characteristics Rated voltage AC max. Rated current max. Contact resistance acc. to life max. 250 V 2A 200 mE Other specifications Operating life (operations) Degree of protection from front side Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Weight Flame class acc. to UL 94 Hot wire ignition acc. to IEC 60695-2-1 ROHS compliant REACH compliant Other Pushb. Mounting hole Approvals 50,000 IP40 acc. to DIN EN 60529 (IP65 with sealing cap) -25 C +85 C -40 C +90 C acc. to IEC 60068-2-14, -30, -33 and -78 14 g V0 yes yes yes Accessories Pushbutton non-illuminated - 18.2 mm, 250 V / 2 A Description Neoprene sealing cap, black, for protection acc. to IP65 Photo Order no. 5.52.008.061/0100 Additional accessories see page - 1-83 PUSHBUTTONS PUSHBUTTONS NON-ILLUMINATED - MOUNTING HOLE DIAMETER 18.2 MM - Table (continued) - Accessories Pushbutton non-illuminated - 18.2 mm, 250 V / 2 A 1 Description Photo Order no. Additional accessories see page Silicone sealing cap, for protection acc. to IP65 5.52.008.065/0000 - Protective sleeve for terminals 5.52.011.028/0100 - Fixing spanner M 18, M 19 5.58.002.017/0105 5 - 25 Pushbutton non-illuminated mounting hole diameter 18.2 mm, 250 V / 2 A Technical data see page 1 - 83 Other Pushb. Mounting hole 1-84 Contact arrangement Color of lens Order no. 2 NO opaque red 1.01.102.001/0301 2 NO opaque green 1.01.102.001/0507 2 NO opaque black 1.01.102.001/0104 1 NC + 1 NO opaque red 1.01.102.011/0301 1 NC + 1 NO opaque green 1.01.102.011/0507 1 NC + 1 NO opaque white 1.01.102.011/0205 1 NC + 1 NO opaque black 1.01.102.011/0104 PUSHBUTTONS PUSHBUTTON ILLUMINABLE - MOUNTING HOLE DIAMETER 20.3 MM, BA9S PUSHBUTTONS ILLUMINABLE 20.3 mm, 250 V / 2 A 1 Technical Data General information Form of lens Color of lens Form of collar protruding lens see order block round Dimensions Diameter of collar Overall height Mounting depth Mounting hole 24 mm 9 mm 45.5 mm 20.3 mm Mechanical design Mounting Contact system Contact function Contact arrangement Contact materials Illumination Lamp socket ring nut solder/quick connect terminals 2.8 x 0.8 mm bridge contact momentary see order block Ag yes BA 9 s Mechanical characteristics Operating force max. Operating travel Switching travel NC Switching travel NO Robustness max. 10 N 3.6 mm 0.8 mm 2.9 mm 100 N Electrical characteristics Rated voltage AC max. Rated current max. Contact resistance acc. to life max. 250 V 2A 200 mE Terminals Other specifications Operating life (operations) Degree of protection from front side Operation temperature min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Weight Flame class acc. to UL 94 Hot wire ignition acc. to IEC 60695-2-1 ROHS compliant REACH compliant Other Pushb. Mounting hole Approvals 100,000 IP40 acc. to DIN EN 60529 (IP65 with sealing cap) -25 C +85 C -40 C +90 C acc. to IEC 60068-2-14, -30, -33 and -78 18 g V0 yes yes yes 1-85 PUSHBUTTONS PUSHBUTTON ILLUMINABLE - MOUNTING HOLE DIAMETER 20.3 MM, BA9S Accessories Pushbutton illuminable - 20.3 mm, 250 V / 2 A 1 Description Photo Order no. Additional accessories see page LED BA 9s (MBC/MCC) superbright, red, 24 V 1.90.690.341/0000 5-8 LED BA 9s (MBC/MCC) superbright, green, 24 V 1.90.690.342/0000 5-8 LED BA 9s (MBC/MCC) superbright, yellow, 24 V 1.90.690.343/0000 5-8 LED BA 9s (MBC/MCC) superbright, blue, 24 V 1.90.690.344/0000 5-8 LED BA 9s (MBC/MCC) superbright, white, 24 V 1.90.690.345/0000 5-8 Silicone sealing cap, for protection acc. to IP65 5.52.008.065/0000 - Protective sleeve for terminals 5.52.011.030/0100 - Fixing spanner M 20, M 22, for ring nut 5.58.002.018/0105 5 - 25 Other Pushb. Pushbutton with lamp socket BA9s (MBC/MCC), mounting hole diameter 20.3 mm, 250 V / 2 A Technical data see page 1 - 85 Mounting hole Contact arrangement Contact function Order no. 1 NO momentary 1.15.112.101/0000 1 NC + 1 NO momentary 1.15.112.121/0000 Lenses: Lens, transparent Lens, transparent Lens, transparent Lens, transparent 1-86 colorless: 5.49.205.008/1002 red: 5.49.205.008/1303 yellow: 5.49.205.008/1402 green: 5.49.205.008/1502 Note Please include the desired lens in your order. Please include the desired lens in your order. PUSHBUTTONS LUMOTAST 22 - E-STOP, MOUNTING HOLE DIAMETER 22.3 MM LUMOTAST 22 E-STOP PUSHBUTTONS, 22.3 MM The emergency stop pushbuttons comply with IEC 60 204, IEC 60 073, IEC 60 947 and VDE 0113 Part 1. They are designed dupe-proof according to EN 418 with a positive mechanical movement sequence. A certain operating force must be exerted at the action point in order to prevent inadvertent operation. The pushbutton latches when pressed. W* The special shape of the actuator prevents the emergency stop pushbutton from being blocked. This means that the emergency stop process - once initiated - cannot be impeded by any jamming objects. Original manual see Appendix" 25.9 0.3 o 29.6 0.2 General information Form of lens Color of lens Form of collar conical mushroom form red round Dimensions Mushroom Diameter Overall height Mounting depth Mounting hole 30 mm 25.9 mm 17.6 mm 22.3 mm Mechanical design Mounting Torque for nut ring Contact function Contact arrangement Illuminability Reset ring nut quick connector 2.8 x 0.8 mm, solderable 1.9 Nm latching see order block see order block by rotation Mechanical characteristics Robustness max. 100 N Terminals Electrical characteristics acc. to IEC/EN 60947-5-1 (VDE 0660 Part 200) Application category Rated insulation voltage Ui Rated operating voltage Ue {Term. Dauerstrom} Other specifications Ambient temp. operating min. Ambient temp. operating max. Robustness Operating life (operations) / B10 Degree of protection from front side Storage temperature min. Storage temperature max. Environmental restistance Salt spray Solder techniques Soldering temperature max. Soldering time max. ROHS compliant REACH compliant 9.1 17.6 0.3 Technical Data 1 - 4.5 1 33, 34 oder / or X1, X2 Flachstecker / quick connect terminals 2.8 x 0.8 mm Other Pushb. Panel cut-out to IEC 60947-5-1 Approvals AC15/DC13 250V (AC/DC) 250V AC, 240V DC 2.5A (AC/DC) -25 C +70 C acc. to IEC 600 68-2-3 und 2-30 15,000 IP65 (DIN EN 60529) -40 C +80 C acc. to IEC 60068-2-14, -30, -33 and -78 IEC 600 68-2-11 manual soldering, lead-free 350 C 5s yes yes 1-87 PUSHBUTTONS LUMOTAST 22 - E-STOP, MOUNTING HOLE DIAMETER 22.3 MM Accessories LUMOTAST 22 E-Stop, 22.3 mm 1 Description Photo Order no. Fixing spanner for ring nut 5.05.800.062/0000 Additional accessories see page 2 - 145, 2 - 261, 5 - 25 LUMOTAST 22 E-Stop Technical data see page 1 - 87 1 - 4.5 9.1 W* 17.6 0.3 25.9 0.3 o 29.6 0.2 33, 34 oder / or X1, X2 Flachstecker / quick connect terminals 2.8 x 0.8 mm Panel cut-out to IEC 60947-5-1 Other Pushb. 1-88 Contact arrangement Illuminability Degree of protection from front side Order no. 2 NC + 1 NO no IP65 (DIN EN 60529) 1.15.105.021/0000 2 NC arrows with 2 LED IP65 (DIN EN 60529) 1.15.105.011/0000 2 NC no IP65 (DIN EN 60529) 1.15.105.001/0000