1
PUSHBUTTONS
LUMOTAST FK 1 - 3
LUMOTAST FK - Illuminated pushbuttons 1 - 7
LUMOTAST FK - Signal lamps 1 - 11
LUMOTAST 25 1 - 15
LUMOTAST 25 - Illuminated pushbuttons 1 - 19
LUMOTAST 25 - Selector switches 1 - 24
LUMOTAST 25 - Keylock switches 1 - 26
LUMOTAST 25 - Emergency stop pushbuttons 1 - 29
LUMOTAST 25 - Signal lamps 1 - 32
LUMOTAST 75 IP40 1 - 35
LUMOTAST 75 IP40 - Illuminated pushbuttons 1 - 37
LUMOTAST 75 IP40 - Keylock switches 1 - 42
LUMOTAST 75 IP40 - Signal lamps with lamp socket T 4.5 1 - 45
LUMOTAST 75 IP65 1 - 49
LUMOTAST 75 IP65 - Illuminated pushbuttons 1 - 51
LUMOTAST 75 IP65 - Signal lamps 1 - 57
Other keylock switches 1 - 63
Keylock switches 1 - 65
Priority keylock switches 1 - 68
Other pushbuttons 1 - 73
Pushbuttons non-illuminated - mounting hole diameter 9.1 mm 1 - 75
Pushbuttons illuminated - mounting hole diameter 9.1 mm 1 - 77
Pushbuttons non-illuminated - mounting hole diameter 15.2 mm 1 - 79
Pushbuttons non-illuminated - mounting hole diameter 16.2 mm 1 - 81
Pushbuttons non-illuminated - mounting hole diameter 18.2 mm 1 - 83
Pushbuttons illuminated - mounting hole diameter 20.3 mm, BA9s 1 - 85
- NEW - LUMOTAST 22 - E-Stop, mounting hole diameter 22.3 mm 1 - 87
1-2
1
PUSHBUTTONS
GENERAL INFORMATION
Concepts
1. Momentary pushbuttons are switching elements which
are used for making or breaking contact while they are
being pressed.
2. Latching pushbutton are used for making or breaking
contact until they are returned to their initial position
by being pressed again.
3. Illuminated pushbuttons have the same functions as
described for (1) and (2) and feature an additional lamp
socket for accomodating a filament, neon lamp or LED.
4. Legending can ce effected using kabel holders, legend
inserts, by engraving or hot stamping. Grooved trans-
parent lenses are not suitable for legending.
CE-Conformity
The products of the Chapter Pushbuttons” can – relating
to the CE-conformity according to the Low-Voltage
Directive 73/23/EWG – be divided into the following
groups:
Emergency-stop components with an operating
voltage < 50 V
F. ex. LUMOTAST 25 emergency-stop. For this pushbutton
the Machine Directive 89/392/EWG applies.
All products with an operating voltage > 50 V
For these elements the Low-Voltage Directive 72/23/EWG
applies.
All products with an operating voltage < 50 V
For these products no directive applies.
Single parts, accessories and illumination
For these products no directiveapplies.
EMC-Law
The components of this catalogue are within the meaning
of the law concerning the Eletromagnetic Conformy
(= EMC-Law) "basic components as, f. ex., switches,
signal lamps or like" and, therefore, do not fall within the
scope of the EMC-Law.
Marking
The marking will be corresponding to the Low-Voltage
Directive 73/23/EWG resp. the Directive "CE-Marking
93/68/EWG" either on the packing or on the product itself.
1-3
1
LUMO
FK
LUMOTAST FK
PUSHBUTTONS
LUMOTAST FK
LUMOTAST FK - Illuminated pushbutton range
s Illuminable pushbuttons and signal lamps with lamp socket T 1/T 1¼.
s Mounting hole diameter 16.2 mm
s 35 V / 100 mA max.
s Degree of protection: IP65 acc. to DIN EN 60529
s Low profile
s Keyed socket connector and flat ribbon cable in insulation displacement
(IDC) technology or PCB plug-in socket
s Time-saving click fixing method: Insert pushbutton into front panel and
press pushbutton once to fix it.
s All products are RoHS compliant.
1-4
1
LUMO
FK
LUMOTAST FK
PUSHBUTTONS
Content
LUMOTAST FK Illuminated pushbuttons 1 - 7
LUMOTAST FK Illuminated pushbutton, round collar 1 - 8
LUMOTAST FK Illuminated pushbutton, square collar 1 - 9
LUMOTAST FK Illuminated pushbutton, rectangular collar 1 - 10
LUMOTAST FK Signal lamps 1 - 11
LUMOTAST FK Signal lamp, round collar 1 - 12
LUMOTAST FK Signal lamp, square collar 1 - 13
LUMOTAST FK Signal lamp, rectangular collar 1 - 13
1-5
1
LUMO
FK
LUMOTAST FK - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
~ pushbutton as supplied
Insert pushbutton into panel cut-out
Press once to fit
Attach connector with flat-ribbon cable
1. Grip body/lens
Series LUMOTAST FK
16.2 mm mounting hole diameter
Mounting
Disassembly from front side
2. Pull out body/lens
3. Release click lever 4. Pull out pushbutton/signal lamp with cable
1-6
1
LUMO
FK
LUMOTAST FK - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
1 + 4 = pushbutton connection, 2 + 3 = lamp connection
If LED is used: connection 3 = cathode
With quick connector and flat-ribbon cable
Dimensional drawing
Connection diagram (PCB top view)
Front panel top view
PCB top view
PCB hole diagram
Sight on component side
With plug-in socket Plug-in socket for PCB
1-7
1
LUMO
FK
LUMOTAST FK - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
LUMOTAST FK
Illuminated
pushbuttons
Panel cut-out
with socket connector
with plug-in socket for PCB
Technical Data
£General information
Actuator flat lens
Color of lens see order block
Form of collar see order block
£Dimensions
Length of collar see order block
Width of collar see order block
Diameter of collar see order block
Overall height 6.6 mm
Mounting depth with connector 30.7 mm
Mounting depth with plug-in socket 33.4 mm
Mounting hole 16.2 mm
£Mechanical design
Mounting click quick connection
Terminals pin connector 4-pole / plug-in socket
Contact system snap-action contact
Contact function momentary
Contact arrangement 1 NO
Contact materials Au
Illumination yes
Lamp socket Bi-Pin T1 / T1¼
£Mechanical characteristics
Operating force max. 6 N
Operating travel 3 mm
Switching travel 1.9 mm
Robustness max. 100 N
£Electrical characteristics
Rated voltage AC/DC max. 35 V
Rated voltage AC/DC min. 0.02 V
Rated current AC/DC max. 100 mA
Rated current AC/DC min. 0.01 mA
Contact resistance acc. to life max. 300 mE
Contact resistance when new max. 100 mE
Bouncing time max. 5 ms
£Other specifications
Operating life (operations) 1,000,000
Degree of protection from front side IP65 (DIN EN 60529)
Operation temperature min. -25 °C
Ambient temp. operating max. without
lamp /LED +70 °C
Ambient temp. operating max. with
lamp /LED +55 °C
Storage temperature min. -40 °C
1-8
1
LUMO
FK
LUMOTAST FK - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
Storage temperature max. +80 °C
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
Weight 6 g
ROHS compliant yes
REACH compliant yes
– Technical data (continued) –
LUMOTAST FK - Illuminated pushbutton
Accessories LUMOTAST FK - Illuminated pushbutton
£Description Photo Order no. Additional acces-
sories see page
Socket Bi-Pin T 1, LED - 5 - 6
Socket Bi-Pin T 1, LED superbright -5 - 6
Plug-in socket for PCB 5.00.645.036/0000 5 - 28
Cable (flat ribbon cable 10 cm with socket connector and male
quick connector, AMP 4-pin) 5.03.771.306/0000 5 - 29
Disassembly tool for LUMOTAST FK 5.05.800.041/0000 5 - 27
Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 28
Socket connector, 4-pin 5.92.025.368/0000 5 - 28
LUMOTAST FK
Illuminated pushbutton,
round collar
Technical data see page 1 - 7
Panel cut-out
£Contact function Contact arrangement Order no. Note
momentary 1 NO 1.15.114.936/0000 Please include the desired lens in your
order.
Note when using LEDs: A notch on the lamp socket identifies the cathode side (-).
1-9
1
LUMO
FK
LUMOTAST FK - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
Lenses:
Lens, round, transparent colorless: 5.49.075.016/1002
– Table (continued) –
LUMOTAST FK - Illuminated pushbutton, round collar
Lens, round, transparent red: 5.49.075.016/1306
Lens, round, transparent yellow: 5.49.075.016/1403
Lens, round, transparent green: 5.49.075.016/1505
Lens, round, transparent blue: 5.49.075.016/1607
LUMOTAST FK
Illuminated pushbutton,
square collar
Technical data see page 1 - 7
Panel cut-out
£Contact function Contact arrangement Order no. Note
momentary 1 NO 1.15.114.906/0000 Please include the desired lens in your
order.
Note when using LEDs: A notch on the lamp socket identifies the cathode side (-).
Lenses:
Lens, square, transparent colorless: 5.49.075.015/1002
Lens, square, transparent red: 5.49.075.015/1306
Lens, square, transparent yellow: 5.49.075.015/1403
Lens, square, transparent green: 5.49.075.015/1505
Lens, square, transparent blue: 5.49.075.015/1607
1-10
1
LUMO
FK
LUMOTAST FK - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
LUMOTAST FK
Illuminated pushbutton,
rectangular collar
Technical data see page 1 - 7
Panel cut-out
£Contact function Contact arrangement Order no. Note
momentary 1 NO 1.15.114.966/0000 Please include the desired lens in your
order.
Note when using LEDs: A notch on the lamp socket identifies the cathode side (-).
Lenses:
Lens, rectangular, transparent colorless: 5.49.075.017/1002
Lens, rectangular, transparent red: 5.49.075.017/1306
Lens, rectangular, transparent yellow: 5.49.075.017/1403
Lens, rectangular, transparent green: 5.49.075.017/1505
Lens, rectangular, transparent blue: 5.49.075.017/1607
1-11
1
LUMO
FK
LUMOTAST FK - SIGNAL LAMPS
PUSHBUTTONS
LUMOTAST FK
Signal lamps
Panel cut-out
with socket connector
with plug-in socket for PCB
Technical Data
£General information
Form of lens flat lens
Color of lens see order block
Form of collar see order block
£Dimensions
Length of collar see order block
Width of collar see order block
Overall height see order block
Mounting depth with connector 30.7 mm
Mounting depth with plug-in socket 33.4 mm
Mounting hole 16.2 mm
£Mechanical design
Mounting click quick connection
Terminals pin connector 4-pole / plug-in socket
Lamp socket Bi-Pin T1 / T1¼
Lamp filament lamp / LED
£Electrical characteristics
Voltage limit max. 24 V
Power limit max. 0.7 W
£Other specifications
Degree of protection from front side IP65 (DIN EN 60529)
Weight 5 g
Operation temperature min. -25 °C
Ambient temp. operating max. +55 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
ROHS compliant yes
REACH compliant yes
Accessories LUMOTAST FK - Signal lamp
£Description Photo Order no. Additional acces-
sories see page
Socket Bi-Pin T 1, LED - 5 - 6
Socket Bi-Pin T 1, LED superbright -5 - 6
Plug-in socket for PCB 5.00.645.036/0000 5 - 28
1-12
1
LUMO
FK
LUMOTAST FK - SIGNAL LAMPS
PUSHBUTTONS
£Description Photo Order no. Additional acces-
sories see page
Cable (flat ribbon cable 10 cm with socket connector and male
quick connector, AMP 4-pin) 5.03.771.306/0000 5 - 29
Disassembly tool for LUMOTAST FK 5.05.800.041/0000 5 - 27
Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 28
Socket connector, 4-pin 5.92.025.368/0000 5 - 28
– Table (continued) –
Accessories LUMOTAST FK - Signal lamp
LUMOTAST FK
Signal lamp, round collar
Technical data see page 1 - 11
Panel cut-out
£Power limit max. Voltage limit max. Lamp socket Order no. Note
0.7 W 24 V Bi-Pin T1 / T1¼ 1.65.121.936/0000 Please include the desired lens in your
order.
Do not press in lens in disassembled condition.
Note when using LEDs: A notch on the lamp socket identifies the cathode side (-).
Lenses:
Lens, round, transparent colorless: 5.49.075.016/1002
Lens, round, transparent red: 5.49.075.016/1306
Lens, round, transparent yellow: 5.49.075.016/1403
Lens, round, transparent green: 5.49.075.016/1505
Lens, round, transparent blue: 5.49.075.016/1607
1-13
1
LUMO
FK
LUMOTAST FK - SIGNAL LAMPS
PUSHBUTTONS
LUMOTAST FK
Signal lamp, square collar
Technical data see page 1 - 11
Panel cut-out
£Power limit max. Voltage limit max. Lamp socket Order no. Note
0.7 W 24 V Bi-Pin T1 / T1¼ 1.65.121.906/0000 Please include the desired lens in your
order.
Do not press in lens in disassembled condition.
Note when using LEDs: A notch on the lamp socket identifies the cathode side (-).
Lenses:
Lens, square, transparent colorless: 5.49.075.015/1002
Lens, square, transparent red: 5.49.075.015/1306
Lens, square, transparent yellow: 5.49.075.015/1403
Lens, square, transparent green: 5.49.075.015/1505
Lens, square, transparent blue: 5.49.075.015/1607
LUMOTAST FK
Signal lamp, rectangular collar
Technical data see page 1 - 11
Panel cut-out
£Power limit max. Voltage limit max. Lamp socket Order no. Note
0.7 W 24 V Bi-Pin T1 / T1¼ 1.65.121.966/0000 Please include the desired lens in your
order.
Do not press in lens in disassembled condition.
Note when using LEDs: A notch on the lamp socket identifies the cathode side (-).
Lenses:
Lens, rectangular, transparent colorless: 5.49.075.017/1002
1-14
1
LUMO
FK
LUMOTAST FK - SIGNAL LAMPS
PUSHBUTTONS
Lens, rectangular, transparent red: 5.49.075.017/1306
– Table (continued) –
LUMOTAST FK - Signal lamp, rectangular collar
Lens, rectangular, transparent yellow: 5.49.075.017/1403
Lens, rectangular, transparent green: 5.49.075.017/1505
Lens, rectangular, transparent blue: 5.49.075.017/1607
1-15
1
LUMO
25
LUMOTAST 25
PUSHBUTTONS
LUMOTAST 25
LUMOTAST 25 - Pushbutton range
s Illuminable pushbuttons and signal lamps.
s Mounting hole diameter: 16.2 mm
s 35 V / 100 mA max.
s Degree of protection: IP65 acc. to DIN EN 60529
s Low profile
s Lamp socket Bi-Pin T 1 for LEDs and filament lamps
s Keyed socket connector and flat ribbon cable or PCB plug-in socket
s Ring nut or click fixing method.
s All products are RoHS compliant.
1-16
1
LUMO
25
LUMOTAST 25
PUSHBUTTONS
Content
LUMOTAST 25 Illuminated pushbuttons 1 - 19
LUMOTAST 25 Illuminated pushbutton with flush lens, „Click“ quick-assembly feature 1 - 21
LUMOTAST 25 Illuminated pushbutton with flush lens, ring nut fixing 1 - 21
LUMOTAST 25 Illuminated pushbutton with protruding lens, „Click“ quick-assembly feature 1 - 22
LUMOTAST 25 Illuminated pushbutton with protruding lens, ring nut fixing 1 - 23
LUMOTAST 25 Selector switches 1 - 24
LUMOTAST 25 Selector switch, ring nut fixing 1 - 25
LUMOTAST 25 Keylock switches 1 - 26
LUMOTAST 25 Keylock switch 1 - 28
LUMOTAST 25 Emergency stop pushbuttons 1 - 29
LUMOTAST 25 Emergency stop pushbutton, ring nut fixing 1 - 31
LUMOTAST 25 Signal lamps 1 - 32
LUMOTAST 25 Signal lamp, 24 V, „Click“ quick-assembly feature 1 - 33
LUMOTAST 25 Signal lamp, 24 V, ring nut fixing 1 - 34
1-17
1
LUMOTAST 25 - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
LUMO
25
~ As delivered
Insert pushbutton in hole
Actuate once
Insert connector with flat-ribbon cable
1. Grip body/lens
Series LUMOTAST 25
16.2 mm mounting hole diameter
Mounting of Click-Version
Disassembly Click-Version from Front Side
Click-Version from front (only for pushbuttons and signal lamps with special tool for dismounting)
2. Pull out body/lens
3. Release click lever 4. Pull out pushbutton/signal lamp with cable
1-18
1
LUMOTAST 25 - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
LUMO
25
1 + 4 = pushbutton connection, 2 + 3 = lamp connection
If LED is used: connection 3 = cathode
With quick connector and flat-ribbon cable
Dimensional drawing
Connection diagram (PCB top view)
With plug-in socket Plug-in socket for PCB
Front panel top view
PCB top view
1+4 contact connection
2+3 lamp connection
PCB hole diagram
Sight on component side
1-19
1
LUMO
25
LUMOTAST 25 - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
LUMOTAST 25
Illuminated
pushbuttons
Panel cut-out
with socket connector
with PCB plug-in socket
Technical Data
£General information
Form of lens see order block
Color of lens see order block
Form of collar square
£Dimensions
Length of collar 25 mm
Width of collar 25 mm
Overall height 7.1 mm
Mounting depth with connector 30.7 mm
Mounting depth with plug-in socket 33.4 mm
Mounting hole 16.2 mm
£Mechanical design
Mounting see order block
Terminals pin connector 4-pole / plug-in socket
Contact system snap-action contact
Contact function momentary
Contact arrangement 1 NO
Contact materials Au
Illumination yes
Lamp socket Bi-Pin T1 / T1¼
£Mechanical characteristics
Operating force max. 6 N
Operating travel 3 mm
Switching travel 2 mm
Robustness max. 100 N
£Electrical characteristics
Rated voltage AC/DC max. 35 V
Rated voltage AC/DC min. 0.02 V
Rated current AC/DC max. 100 mA
Rated current AC/DC min. 0.01 mA
Contact resistance acc. to life max. 100 mE
Bouncing time max. 5 ms
£Other specifications
Operating life (operations) 1,000,000
Degree of protection from front side IP65 (DIN EN 60529)
Ambient temp. operating max. without
lamp /LED -25 °C
Ambient temp. operating max. without
lamp /LED +70 °C
Ambient temp. operating min. with
lamp /LED -25 °C
Ambient temp. operating max. with
lamp /LED +55 °C
1-20
1
LUMO
25
LUMOTAST 25 - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
Weight 7 g
ROHS compliant yes
REACH compliant yes
– Technical data (continued) –
LUMOTAST 25 - Illuminated pushbutton
Accessories LUMOTAST 25 - Illuminated pushbutton
£Description Photo Order no. Additional acces-
sories see page
Socket Bi-Pin T 1, LED - 5 - 6
Socket Bi-Pin T 1, LED superbright -5 - 6
Plug-in socket for PCB 5.00.645.036/0000 5 - 28
Cable (flat ribbon cable 10 cm with socket connector and male
quick connector, AMP 4-pin) 5.03.771.306/0000 5 - 29
Disassembly tool for LUMOTAST 25, RAFIX 16 5.05.800.042/0000 5 - 27
Blanking cap complete with sealing disc and ring nut, square 5.05.800.049/0100 2 - 83, 5 - 23
Label holder, flush, for square collar 5.07.620.004/0000 2 - 80
Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 28
Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25
Legend insert, blank, use only for transparent lenses 5.70.635.000/2000 -
Legend label 23 x 16 for label holder, without legend 5.73.111.000/0000 -
Socket connector, 4-pin 5.92.025.368/0000 5 - 28
1-21
1
LUMO
25
LUMOTAST 25 - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
LUMOTAST 25
Illuminated pushbutton
with flush lens,
„Click“ quick-assembly feature
Technical data see page 1 - 19
Panel cut-out
£Contact function Contact arrangement Order no. Note
momentary 1 NO 1.15.150.506/0000 Please include the desired lens in your
order.
Note when using LEDs: A notch on the lamp socket identifies the cathode side (-).
Lenses:
Lens, square, transparent colorless: 5.49.077.011/1002
Lens, square, transparent red: 5.49.077.011/1306
Lens, square, transparent yellow: 5.49.077.011/1403
Lens, square, transparent green: 5.49.077.011/1505
Lens, square, transparent blue: 5.49.077.011/1607
LUMOTAST 25
Illuminated pushbutton
with flush lens, ring nut fixing
Technical data see page 1 - 19
Panel cut-out
£Contact function Contact arrangement Order no. Note
momentary 1 NO 1.15.150.556/0000 Please include the desired lens in your
order.
Note when using LEDs: A notch on the lamp socket identifies the cathode side (-).
Lenses:
Lens, square, transparent colorless: 5.49.077.011/1002
1-22
1
LUMO
25
LUMOTAST 25 - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
Lens, square, transparent red: 5.49.077.011/1306
– Table (continued) –
LUMOTAST 25 - Illuminated pushbutton with flush lens, ring nut fixing
Lens, square, transparent yellow: 5.49.077.011/1403
Lens, square, transparent green: 5.49.077.011/1505
Lens, square, transparent blue: 5.49.077.011/1607
LUMOTAST 25
Illuminated pushbutton
with protruding lens,
„Click“ quick-assembly feature
Technical data see page 1 - 19
Panel cut-out
£Contact function Contact arrangement Order no. Note
momentary 1 NO 1.15.150.606/0000 Please include the desired lens in your
order.
Note when using LEDs: A notch on the lamp socket identifies the cathode side (-).
Lenses:
Lens, square, transparent colorless: 5.49.077.012/1002
Lens, square, transparent red: 5.49.077.012/1306
Lens, square, transparent yellow: 5.49.077.012/1403
Lens, square, transparent green: 5.49.077.012/1505
Lens, square, transparent blue: 5.49.077.012/1607
1-23
1
LUMO
25
LUMOTAST 25 - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
LUMOTAST 25
Illuminated pushbutton with
protruding lens, ring nut fixing
Technical data see page 1 - 19
Panel cut-out
£Contact function Contact arrangement Order no. Note
momentary 1 NO 1.15.150.656/0000 Please include the desired lens in your
order.
Note when using LEDs: A notch on the lamp socket identifies the cathode side (-).
Lenses:
Lens, square, transparent colorless: 5.49.077.012/1002
Lens, square, transparent red: 5.49.077.012/1306
Lens, square, transparent yellow: 5.49.077.012/1403
Lens, square, transparent green: 5.49.077.012/1505
Lens, square, transparent blue: 5.49.077.012/1607
1-24
1
LUMO
25
LUMOTAST 25 - SELECTOR SWITCHES
PUSHBUTTONS
LUMOTAST 25
Selector switches
Panel cut-out
Technical Data
£General information
Actuator handle
Color of handle black opaque
Form of collar square
£Dimensions
Length of collar 25 mm
Width of collar 25 mm
Overall height 17 mm
Mounting depth with connector 30.7 mm
Mounting depth with plug-in socket 33.4 mm
Mounting hole 16.2 mm
£Mechanical design
Mounting see order block
Terminals pin connector 4-pole / plug-in socket
Contact system snap-action contact
Contact function see order block
Contact arrangement 1 NO
Contact materials Au
Illumination no
£Mechanical characteristics
Operating force min. 0.03 Nm
Rotating angle see order block
Operating force max. 1.5 N
£Electrical characteristics
Rated voltage AC/DC max. 35 V
Rated voltage AC/DC min. 0.02 V
Rated current AC/DC max. 100 mA
Rated current AC/DC min. 0.01 mA
Contact resistance acc. to life max. 100 mE
Bouncing time max. 5 ms
£Other specifications
Operating life (operations) 500,000
Degree of protection from front side IP65 (DIN EN 60529)
Operation temperature min. -25 °C
Ambient temp. operating max. +70 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
Weight 8 g
ROHS compliant yes
REACH compliant yes
1-25
1
LUMO
25
LUMOTAST 25 - SELECTOR SWITCHES
PUSHBUTTONS
Accessories LUMOTAST 25 - Selector switch
£Description Photo Order no. Additional acces-
sories see page
Plug-in socket for PCB 5.00.645.036/0000 5 - 28
Cable (flat ribbon cable 10 cm with socket connector and male
quick connector, AMP 4-pin) 5.03.771.306/0000 5 - 29
Blanking cap complete with sealing disc and ring nut, square 5.05.800.049/0100 2 - 83, 5 - 23
Label holder, flush, for square collar 5.07.620.004/0000 2 - 80
Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 28
Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25
Socket connector, 4-pin 5.92.025.368/0000 5 - 28
LUMOTAST 25
Selector switch, ring nut fixing
Technical data see page 1 - 24
Panel cut-out
£Contact arrangement Contact function Rotating angle Actuator Order no.
1 NO latching right, 1 x 90° handle 1.15.153.106/0100
1-26
1
LUMO
25
LUMOTAST 25 - KEYLOCK SWITCHES
PUSHBUTTONS
LUMOTAST 25
Keylock switches
Panel cut-out
The locking systems we use are created according to DIN EN 1303 by
leading lock manufacturers. They are are open, mechanical systems that
require occasional maintenance of the machinery or plant operator
depending on environmental conditions.
£
Technical Data
£General information
Color of lens black opaque
Form of collar square
£Dimensions
Length of collar 25 mm
Width of collar 25 mm
Overall height 32.3 mm
Mounting depth with connector 30.7 mm
Mounting depth with plug-in socket 33.4 mm
Mounting hole 16.2 mm
£Mechanical design
Mounting ring nut
Terminals pin connector 4-pol./ plug-in socket
Contact system snap-action contact
Contact function latching
Contact arrangement 1 NO
Contact materials Au
Illumination no
Lamp socket no
Lock cylinder lock
Wafers 8 pins
Lock type 5201
Number of locking positions 10,000
Main key yes
Symmetric key yes
Key removal position see order block
£Mechanical characteristics
Operating force max. 1.5 N
Rotating angle 90°
£Electrical characteristics
Rated voltage AC/DC max. 35 V
Rated voltage AC/DC min. 0.02 V
Rated current AC/DC max. 100 mA
Rated current AC/DC min. 0.01 mA
Contact resistance acc. to life max. 100 mE
Bouncing time max. 5 ms
£Other specifications
Operating life (operations) 50,000
Degree of protection from front side IP65 (DIN EN 60529)
Operation temperature min. -25 °C
1-27
1
LUMO
25
LUMOTAST 25 - KEYLOCK SWITCHES
PUSHBUTTONS
Ambient temp. operating max. +70 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
Weight 20 g
ROHS compliant yes
REACH compliant yes
– Technical data (continued) –
LUMOTAST 25 - Keylock switch
Accessories LUMOTAST 25 - Keylock switch
£Description Photo Order no. Additional acces-
sories see page
Plug-in socket for PCB 5.00.645.036/0000 5 - 28
Cable (flat ribbon cable 10 cm with socket connector and male
quick connector, AMP 4-pin) 5.03.771.306/0000 5 - 29
Blanking cap complete with sealing disc and ring nut, square 5.05.800.049/0100 2 - 83, 5 - 23
Label holder, flush, for square collar 5.07.620.004/0000 2 - 80
Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 28
Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25
Spare key set (2 keys) 5.58.015.201/0000 -
Legend label 23 x 16 for label holder, without legend 5.73.111.000/0000 -
Socket connector, 4-pin 5.92.025.368/0000 5 - 28
1-28
1
LUMO
25
LUMOTAST 25 - KEYLOCK SWITCHES
PUSHBUTTONS
LUMOTAST 25
Keylock switch
Technical data see page 1 - 26
Panel cut-out
£Contact arrange-
ment
Contact func-
tion
Rotating angle Key removal positi-
on
Color of lens Order no.
1 NO latching 90° 0 black opaque 1.15.156.001/0000
1 NO latching 90° 0 + 1 black opaque 1.15.156.011/0000
Included: 2 keys.
1-29
1
LUMO
25
LUMOTAST 25 - EMERGENCY STOP PUSHBUTTONS
PUSHBUTTONS
LUMOTAST 25
Emergency stop
pushbuttons
Panel cut-out
Approvals
IEC 60947-5-x,
60204, 60073
UL 9ZX6
Original manual see „Appendix“
£
Technical Data
£General information
Color of lens opaque red
Form of collar square
Color of collar see order block
£Dimensions
Length of collar 25 mm
Width of collar 25 mm
Overall height 18.5 mm
Mounting depth with connector 30.7 mm
Mounting depth with plug-in socket 33.4 mm
Mounting hole 16.2 mm
£Mechanical design
Mounting ring nut
Terminals pin connector 4-pole / plug-in socket
Contact system snap-action contact
Contact function latching
Contact arrangement 2 NC (forcibly actuated)
Contact materials Au
Illumination no
Reset by pulling
£Mechanical characteristics
Operating force max. 10 N
Operating travel 2.6 mm
Switching travel 2 mm
Robustness max. 100 N
£Electrical characteristics
Rated voltage AC/DC max. 25 V
Rated voltage AC/DC min. 0.02 V
Rated current AC/DC max. 100 mA (1A short-circuit current)
Rated current AC/DC min. 0.01 mA
Contact resistance acc. to life max. 100 mE
Bouncing time max. 10 ms
£Other specifications
Operating life (operations) 15,000
Degree of protection from front side IP65 (DIN EN 60529)
Operation temperature min. -25 °C
Ambient temp. operating max. +70 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
1-30
1
LUMO
25
LUMOTAST 25 - EMERGENCY STOP PUSHBUTTONS
PUSHBUTTONS
Weight 9 g
ROHS compliant yes
REACH compliant yes
– Technical data (continued) –
LUMOTAST 25 - Emergency stop pushbutton
Accessories LUMOTAST 25 - Emergency stop pushbutton
£Description Photo Order no. Additional acces-
sories see page
Plug-in socket for PCB 5.00.645.036/0000 5 - 28
Cable (flat ribbon cable 10 cm with socket connector and male
quick connector, AMP 4-pin) 5.03.771.306/0000 5 - 29
Blanking cap complete with sealing disc and ring nut, square 5.05.800.049/0100 2 - 83, 5 - 23
Label holder, flush, for square collar 5.07.620.004/0000 2 - 80
Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 28
Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25
Legend label 23 x 16 for label holder, without legend 5.73.111.000/0000 -
Adhesive label yellow, round 16.1 / 60 mm, without legend 5.76.204.425/0400 -
Adhesive label yellow, round 16.1 / 60 mm, with legend
„Not-Aus“ 5.76.204.426/0400 -
Adhesive label yellow, round 16.1 / 60 mm, with legend
„ARRET-D‘URGENCE“ 5.76.204.427/0400 -
Adhesive label yellow, round 16.1 / 60 mm, with legend
„EMERGENCY-STOP“ 5.76.204.428/0400 -
Adhesive label yellow, round 16.1 / 60 mm, with legend
„ARRESTO-D‘EMERGENZA“ 5.76.204.429/0400 -
Socket connector, 4-pin 5.92.025.368/0000 5 - 28
1-31
1
LUMO
25
LUMOTAST 25 - EMERGENCY STOP PUSHBUTTONS
PUSHBUTTONS
LUMOTAST 25
Emergency stop pushbutton,
ring nut fixing
Technical data see page 1 - 29
Panel cut-out
£Contact function Contact arrangement Color of collar Order no.
latching 2 NC (forcibly actuated) yellow 1.15.154.016/0301
latching 2 NC (forcibly actuated) black 1.15.154.006/0301
Original operating instructions see appendix.
1-32
1
LUMO
25
LUMOTAST 25 - SIGNAL LAMPS
PUSHBUTTONS
LUMOTAST 25
Signal lamps
Panel cut-out
Technical Data
£General information
Form of lens square
Color of lens see order block
£Dimensions
Length of collar 25 mm
Width of collar 25 mm
Overall height 9.8 mm
Mounting depth with connector 30.7 mm
Mounting depth with plug-in socket 33.4 mm
Mounting hole 16.2 mm
£Mechanical design
Mounting see order block
Terminals pin connector 4-pole / plug-in socket
Lamp socket Bi-Pin T1 / T1¼
Lamp filament lamp / LED
£Electrical characteristics
Voltage limit max. 24 V
Power limit max. 0.7 W
£Other specifications
Degree of protection from front side IP65 (DIN EN 60529)
Weight 7 g
Operation temperature min. -25 °C
Ambient temp. operating max. +70 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
ROHS compliant yes
REACH compliant yes
Accessories LUMOTAST 25 - Signal lamp
£Description Photo Order no. Additional acces-
sories see page
Socket Bi-Pin T 1, LED - 5 - 6
Socket Bi-Pin T 1, LED superbright -5 - 6
Plug-in socket for PCB 5.00.645.036/0000 5 - 28
1-33
1
LUMO
25
LUMOTAST 25 - SIGNAL LAMPS
PUSHBUTTONS
£Description Photo Order no. Additional acces-
sories see page
Cable (flat ribbon cable 10 cm with socket connector and male
quick connector, AMP 4-pin) 5.03.771.306/0000 5 - 29
Disassembly tool for LUMOTAST 25, RAFIX 16 5.05.800.042/0000 5 - 27
Blanking cap complete with sealing disc and ring nut, square 5.05.800.049/0100 2 - 83, 5 - 23
Label holder, flush, for square collar 5.07.620.004/0000 2 - 80
Flat ribbon cable, 4-wire, 1 m long 5.37.700.124/0000 5 - 28
Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25
Legend insert, blank, use only for transparent lenses 5.70.635.000/2000 -
Legend label 23 x 16 for label holder, without legend 5.73.111.000/0000 -
Socket connector, 4-pin 5.92.025.368/0000 5 - 28
– Table (continued) –
Accessories LUMOTAST 25 - Signal lamp
LUMOTAST 25
Signal lamp, 24 V,
„Click“ quick-assembly feature
Technical data see page 1 - 32
Panel cut-out
£Voltage limit max. Power limit max. Lamp socket Order no. Note
24 V 0.7 W Bi-Pin T1 / T1¼ 1.65.122.906/0000 Please include the desired lens in your
order.
Do not press in lens in disassembled condition.
Please note when using a LED: A notch on the lamp identifies the cathode side (-).
Lenses:
Lens, square, transparent colorless: 5.49.077.014/1002
Lens, square, transparent red: 5.49.077.014/1306
Lens, square, transparent yellow: 5.49.077.014/1403
Lens, square, transparent green: 5.49.077.014/1505
Lens, square, transparent blue: 5.49.077.014/1607
1-34
1
LUMO
25
LUMOTAST 25 - SIGNAL LAMPS
PUSHBUTTONS
LUMOTAST 25
Signal lamp, 24 V, ring nut fixing
Technical data see page 1 - 32
Panel cut-out
£Voltage limit max. Power limit max. Lamp socket Order no. Note
24 V 0.7 W Bi-Pin T1 / T1¼ 1.65.122.956/0000 Please include the desired lens in your
order.
Please note when using LED: A notch on the lamp socket identifies the cathode side (-).
Lenses:
Lens, square, transparent colorless: 5.49.077.014/1002
Lens, square, transparent red: 5.49.077.014/1306
Lens, square, transparent yellow: 5.49.077.014/1403
Lens, square, transparent green: 5.49.077.014/1505
Lens, square, transparent blue: 5.49.077.014/1607
1-35
1
LUMO
75 (40)
LUMOTAST 75 IP40
PUSHBUTTONS
LUMOTAST 75 IP40
LUMOTAST 75 IP40 - Pushbutton range
Illuminated pushbuttons, signal lamps and keylock switches
s Mounting hole diameter 16.2 mm
s Degree of protection IP40 acc. DIN EN 60529
s Solder terminals for the following wire cross-sections:
- Installed 0.5 mm2 max.
- Factory terminated 0.35 mm2 max.
s 250 V/4 A max.
s 2 NC + 2 NO max.
s Lamp socket T 4.5
s Illumination: LED / filament lamp
s All products are RoHS compliant.
1-36
1
LUMO
75 (40)
LUMOTAST 75 IP40
PUSHBUTTONS
Content
LUMOTAST 75 IP40 Illuminated pushbuttons 1 - 37
LUMOTAST 75 IP40 Illuminated pushbutton, protruding lens, round collar 1 - 39
LUMOTAST 75 IP40 Illuminated pushbutton, flush lens, square collar 1 - 39
LUMOTAST 75 IP40 Illuminated pushbutton, protruding lens, square collar 1 - 40
LUMOTAST 75 IP40 Illuminated pushbutton, flush lens, rectangular collar 1 - 41
LUMOTAST 75 IP40 Keylock switches 1 - 42
LUMOTAST 75 IP40 Keylock switch, round collar 1 - 43
LUMOTAST 75 IP40 Keylock switch, rectangular collar 1 - 44
LUMOTAST 75 IP40 Signal lamps with lamp socket T 4.5 1 - 45
LUMOTAST 75 IP40 Signal lamp with lamp socket T 4.5, round collar, protruding lens 1 - 46
LUMOTAST 75 IP40 Signal lamp, square collar, flush lens 1 - 47
LUMOTAST 75 IP40 Signal lamp, square collar, protruding lens 1 - 47
LUMOTAST 75 IP40 Signal lamp, rectangular collar, flush lens 1 - 48
1-37
1
LUMO
75 (40)
LUMOTAST 75 IP40 - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
LUMOTAST 75 IP40
Illuminated
pushbuttons
Mounting hole
Approvals
ENEC 25T70
without lamp,
25T55 with lamp
UL 508 C22.2
No. 14-M91
Technical Data
£General information
Form of lens see order block
Form of collar see order block
Color of collar see order block
£Dimensions
Length of collar see order block
Width of collar see order block
Diameter of collar see order block
Overall height 7.5 mm
Mounting depth 41.5/49.5/57.5 mm
Mounting hole 16.2 mm
£Mechanical design
Mounting ring nut
Terminals solder terminals
Contact system snap-action bridge contact
Contact function see order block
Contact arrangement see order block
Contact materials Ag
Illumination LED
Lamp socket T 4.5
£Mechanical characteristics
Operating force max. 3 ... 6.5 N
Operating travel 2.7 mm
Switching travel NC 1.6 mm
Switching travel NO 0.9 mm
Robustness max. 100 N
£Electrical characteristics
Rated voltage AC max. 250 V
Rated voltage DC max. 230 V
Rated voltage AC/DC min. 12 V
Rated current AC max. 4 A
Rated current DC max. 0.2 A
Rated current AC/DC min. 5 mA
Contact resistance acc. to life max. 200 mE
Protection class II
ESD-strength min. 14 kV
£Other specifications
Operating life, at 250 V/2 A (operations) 200,000 (momentary)
Operating life, at 250 V/4 A (operations) 60,000 (momentary), 10,000 (latching)
Degree of protection from front side IP40 (DIN EN 60529)
Operation temperature min. -25 °C
Ambient temp. operating max. without
lamp /LED +70 °C
1-38
1
LUMO
75 (40)
LUMOTAST 75 IP40 - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
Ambient temp. operating max. with
lamp /LED +55 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
Flame class acc. to UL 94 V 1
Hot wire ignition acc. to IEC 60695-2-1 yes
ROHS compliant yes
REACH compliant yes
– Technical data (continued) –
LUMOTAST 75 IP40 - Illuminated pushbutton
Accessories LUMOTAST 75 IP40 - Illuminated pushbutton
£Description Photo Order no. Additional acces-
sories see page
Socket T 4.5, LED - 5 - 7
Socket T 4.5, LED superbright -5 - 7
Lamp extractor for lamp diameter 4 mm 1.90.900.002/0000 5 - 26
Lamp extractor for lamp diameter 5-6 mm 1.90.900.004/0000 5 - 26
Blanking cap, black, to cover spare holes,
dimensions 18 x 18 mm 5.52.006.020/0103 5 - 22
Blanking cap, black, to cover spare holes,
dimensions 18 x 24 mm 5.52.006.021/0100 5 - 22
Blanking cap, black, to cover spare holes, round 18 mm 5.52.006.022/0100 5 - 22
Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25
1-39
1
LUMO
75 (40)
LUMOTAST 75 IP40 - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
LUMOTAST 75 IP40
Illuminated pushbutton,
protruding lens, round collar
Technical data see page 1 - 37
Mounting hole
£Contact arrangement Contact function Color of collar Order no. Note
1 NC + 1 NO momentary black 1.15.108.451/0000 Please include the desired lens and
diffuser in your order.
1 NC + 1 NO latching black 1.15.108.551/0000 Please include the desired lens and
diffuser in your order.
2 NC + 2 NO momentary black 1.15.108.452/0000 Please include the desired lens and
diffuser in your order.
2 NC + 2 NO latching black 1.15.108.552/0000 Please include the desired lens and
diffuser in your order.
Lenses:
Lens, round, transparent colorless, for LED: 5.49.257.011/1002
Lens, round, transparent red, for LED: 5.49.257.011/1301
Lens, round, transparent yellow, for LED: 5.49.257.011/1402
Lens, round, transparent green, for LED: 5.49.257.011/1503
Diffuser, round, for LED, without legend: 5.72.050.000/0214
LUMOTAST 75 IP40
Illuminated pushbutton,
flush lens, square collar
Technical data see page 1 - 37
Mounting hole
£Contact arrangement Contact function Color of collar Order no. Note
1 NC + 1 NO momentary black 1.15.108.251/0000 Please include the desired lens and
diffuser in your order.
1 NC + 1 NO latching black 1.15.108.351/0000 Please include the desired lens and
diffuser in your order.
1-40
1
LUMO
75 (40)
LUMOTAST 75 IP40 - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
£Contact arrangement Contact function Color of collar Order no. Note
2 NC + 2 NO momentary black 1.15.108.252/0000 Please include the desired lens and
diffuser in your order.
2 NC + 2 NO latching black 1.15.108.352/0000 Please include the desired lens and
diffuser in your order.
– Table (continued) –
LUMOTAST 75 IP40 - Illuminated pushbutton, flush lens, square collar
Lenses:
Lens, square, transparent colorless, for LED: 5.49.275.036/1002
Lens, square, transparent red, for LED: 5.49.275.036/1301
Lens, square, transparent yellow, for LED: 5.49.275.036/1402
Lens, square, transparent green, for LED: 5.49.275.036/1503
Diffuser, square, for LED, without legend: 5.73.013.000/0214
Accessoires:
LUMOTAST 75 IP40 - Protective cap for 18 x 18 collar: 5.05.800.030/0000
LUMOTAST 75 IP40 - Sealing cap for protection class IP 65, for 18 x 18 collar: 5.05.200.009/0000
LUMOTAST 75 IP40
Illuminated pushbutton,
protruding lens, square collar
Technical data see page 1 - 37
Mounting hole
£Contact arrangement Contact function Color of collar Order no. Note
1 NC + 1 NO momentary black 1.15.108.256/0000 Please include the desired lens and
diffuser in your order.
1 NC + 1 NO latching black 1.15.108.356/0000 Please include the desired lens and
diffuser in your order.
2 NC + 2 NO momentary black 1.15.108.257/0000 Please include the desired lens and
diffuser in your order.
2 NC + 2 NO latching black 1.15.108.357/0000 Please include the desired lens and
diffuser in your order.
Lenses:
Lens, square, transparent colorless, for LED: 5.49.275.036/1002
Lens, square, transparent red, for LED: 5.49.275.036/1301
Lens, square, transparent yellow, for LED: 5.49.275.036/1402
Lens, square, transparent green, for LED: 5.49.275.036/1503
Diffuser, square, for LED, without legend: 5.73.013.000/0214
Accessoires:
LUMOTAST 75 IP40 - Protective cap for 18 x 18 collar: 5.05.800.030/0000
LUMOTAST 75 IP40 - Sealing cap for protection class IP 65, for 18 x 18 collar: 5.05.200.009/0000
1-41
1
LUMO
75 (40)
LUMOTAST 75 IP40 - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
LUMOTAST 75 IP40
Illuminated pushbutton,
flush lens, rectangular collar
Technical data see page 1 - 37
Panel cut-out
£Contact arrangement Contact function Color of collar Order no. Note
1 NC + 1 NO momentary black 1.15.108.051/0000 Please include the desired lens and
diffuser in your order.
1 NC + 1 NO latching black 1.15.108.151/0000 Please include the desired lens and
diffuser in your order.
2 NC + 2 NO momentary black 1.15.108.052/0000 Please include the desired lens and
diffuser in your order.
2 NC + 2 NO latching black 1.15.108.152/0000 Please include the desired lens and
diffuser in your order.
Lenses:
Lens, rectangular, transparent colorless, for LED: 5.49.275.032/1002
Lens, rectangular, transparent red, for LED: 5.49.275.032/1301
Lens, rectangular, transparent yellow, for LED: 5.49.275.032/1402
Lens, rectangular, transparent green, for LED: 5.49.275.032/1503
Diffuser, rectangular, for LED, without legend: 5.73.012.000/0214
Accessoires:
LUMOTAST 75 IP40 - Protective cap for 18 x 24 collar: 5.05.800.027/0000
LUMOTAST 75 IP40 -Sealing cap for protection class IP65, for 18 x 24 collar: 5.05.200.008/0000
1-42
1
LUMO
75 (40)
LUMOTAST 75 IP40 - KEYLOCK SWITCHES
PUSHBUTTONS
LUMOTAST 75 IP40
Keylock switches
Mounting hole
Approvals
ENEC 25T70 UL 508 C22.2
No. 14-M91
The locking systems we use are created according to DIN EN 1303 by
leading lock manufacturers. They are are open, mechanical systems that
require occasional maintenance of the machinery or plant operator
depending on environmental conditions.
£
Technical Data
£General information
Form of lens see order block
Color of collar see order block
Form of collar see order block
£Dimensions
Length of collar see order block
Diameter of collar see order block
Width of collar see order block
Overall height (without key) 7.5 mm
Mounting depth see order block
Mounting hole 16.2 mm
£Mechanical design
Mounting ring nut
Terminals solder terminals
Contact system snap-action bridge contact
Contact function see order block
Contact arrangement see order block
Contact materials Ag
Illumination no
Lock cylinder lock
Wafers 4 pins
Lock type 1D 21
Number of locking positions 45
Main key no
Symmetric key no
Key removal position see order block
£Mechanical characteristics
Rotating angle see order block
£Electrical characteristics
Rated voltage AC max. 250 V
Rated voltage DC max. 230 V
Rated voltage AC/DC min. 12 V
Rated current AC max. 4 A
Rated current DC max. 0,2 A
Rated current AC/DC min. 5 mA
Contact resistance acc. to life max. 200 mE
ESD-strength min. 14 kV
£Other specifications
Operating life, at 250 V/2 A (operations) 50,000 (momentary)
Operating life, at 250 V/4 A (operations) 50,000 (momentary)
Degree of protection from front side IP40 (DIN EN 60529)
1-43
1
LUMO
75 (40)
LUMOTAST 75 IP40 - KEYLOCK SWITCHES
PUSHBUTTONS
Operation temperature min. -25 °C
Ambient temp. operating max. +70 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
Weight 35 g
Flame class acc. to UL 94 V 1
Hot wire ignition acc. to IEC 60695-2-1 yes
ROHS compliant yes
REACH compliant yes
– Technical data (continued) –
LUMOTAST 75 IP40 - Keylock switch
Accessories LUMOTAST 75 IP40 - Keylock switch
£Description Photo Order no. Additional acces-
sories see page
Blanking cap, black, to cover spare holes,
dimensions 18 x 24 mm 5.52.006.021/0100 5 - 22
Blanking cap, black, to cover spare holes, round 18 mm 5.52.006.022/0100 5 - 22
Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25
Keylock switch cap 5.58.002.030/0000 -
LUMOTAST 75 - Spare key (1 piece) 5.58.004.721/0000 -
LUMOTAST 75 IP40
Keylock switch, round collar
Technical data see page 1 - 42
Mounting hole
£Contact
arrangement
Contact
function
Rotating angle Key removal
position
Color of collar Order no.
1 NC + 1 NO momentary 45° 0 black 1.15.108.941/0000
1 NC + 1 NO latching 90° 0 black 1.15.108.851/0000
1-44
1
LUMO
75 (40)
LUMOTAST 75 IP40 - KEYLOCK SWITCHES
PUSHBUTTONS
£Contact
arrangement
Contact
function
Rotating angle Key removal
position
Color of collar Order no.
1 NC + 1 NO latching 90° 0+1 black 1.15.108.911/0000
2 NC + 2 NO latching 90° 0 black 1.15.108.852/0000
2 NC + 2 NO latching 90° 0+1 black 1.15.108.912/0000
– Table (continued) –
LUMOTAST 75 IP40 - Keylock switch, round collar
Included: 2 keys.
Other lock variants and contact arrangements available on request.
LUMOTAST 75 IP40
Keylock switch, rectangular collar
Technical data see page 1 - 42
Panel cut-out
£Contact
arrangement
Contact
function
Rotating angle Key removal
position
Color of collar Order no.
1 NC + 1 NO momentary 45° 0 black 1.15.108.661/0100
1 NC + 1 NO latching 90° 0 black 1.15.108.571/0100
1 NC + 1 NO latching 90° 0+1 black 1.15.108.631/0100
2 NC + 2 NO latching 90° 0 black 1.15.108.572/0100
2 NC + 2 NO latching 90° 0+1 black 1.15.108.632/0100
Included: 2 keys.
Other lock variants and contact arrangements available on request.
1-45
1
LUMO
75 (40)
LUMOTAST 75 IP40 - SIGNAL LAMPS WITH LAMP SOCKET T 4.5
PUSHBUTTONS
LUMOTAST 75 IP40
Signal lamps with
lamp socket T 4.5
Mounting hole
Approvals
IEC 61058 UL 508 C22.2
No. 14-M91
Technical Data
£General information
Form of lens see order block
Form of collar see order block
Color of collar see order block
£Dimensions
Length of collar see order block
Width of collar see order block
Diameter of collar see order block
Overall height 7.5 mm
Mounting depth 33.5 mm
Mounting hole 16.2 mm
£Mechanical design
Mounting ring nut
Terminals solder terminals
Lamp socket T 4.5
Illumination LED / filament lamp
£Electrical characteristics
Voltage limit max. 35 V
Power limit max. 1.2 W
£Other specifications
Degree of protection from front side IP40 (DIN EN 60529)
Weight 5 g
Operation temperature min. -25 °C
Ambient temp. operating max. +55 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
ROHS compliant yes
REACH compliant yes
Accessories LUMOTAST 75 IP40 - Signal lamp with lamp socket T 4.5
£Description Photo Order no. Additional acces-
sories see page
Socket T 4.5, LED - 5 - 7
Socket T 4.5, LED superbright -5 - 7
1-46
1
LUMO
75 (40)
LUMOTAST 75 IP40 - SIGNAL LAMPS WITH LAMP SOCKET T 4.5
PUSHBUTTONS
£Description Photo Order no. Additional acces-
sories see page
Blanking cap, black, to cover spare holes,
dimensions 18 x 18 mm 5.52.006.020/0103 5 - 22
Blanking cap, black, to cover spare holes,
dimensions 18 x 24 mm 5.52.006.021/0100 5 - 22
Blanking cap, black, to cover spare holes, round 18 mm 5.52.006.022/0100 5 - 22
Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25
– Table (continued) –
Accessories LUMOTAST 75 IP40 - Signal lamp with lamp socket T 4.5
LUMOTAST 75 IP40
Signal lamp with lamp socket
T 4.5, round collar, protruding lens
Technical data see page 1 - 45
Mounting hole
£Voltage limit max. Power limit
max.
Lamp socket Color of collar Order no. Note
35 V 1.2 W T 4.5 black 1.65.111.071/0000 Please include the desired lens and
diffuser in your order.
Lenses:
Lens, round, transparent colorless, for LED: 5.49.257.011/1002
Lens, round, transparent red, for LED: 5.49.257.011/1301
Lens, round, transparent yellow, for LED: 5.49.257.011/1402
Lens, round, transparent green, for LED: 5.49.257.011/1503
Diffuser, round, for LED, without legend: 5.72.050.000/0214
1-47
1
LUMO
75 (40)
LUMOTAST 75 IP40 - SIGNAL LAMPS WITH LAMP SOCKET T 4.5
PUSHBUTTONS
LUMOTAST 75 IP40
Signal lamp, square collar,
flush lens
Technical data see page 1 - 45
Mounting hole
£Voltage limit max. Power limit
max.
Lamp socket Color of collar Order no. Note
35 V 1.2 W T 4.5 black 1.65.111.061/0000 Please include the desired lens and
diffuser in your order.
Lenses:
Lens, square, transparent colorless, for LED: 5.49.275.036/1002
Lens, square, transparent red, for LED: 5.49.275.036/1301
Lens, square, transparent yellow, for LED: 5.49.275.036/1402
Lens, square, transparent green, for LED: 5.49.275.036/1503
Diffuser, square, for LED, without legend: 5.73.013.000/0214
LUMOTAST 75 IP40
Signal lamp, square collar,
protruding lens
Technical data see page 1 - 45
Mounting hole
£Voltage limit max. Power limit
max.
Lamp socket Color of collar Order no. Note
35 V 1.2 W T 4.5 black 1.65.111.081/0000 Please include the desired lens and
diffuser in your order.
Lenses:
Lens, square, transparent colorless, for LED: 5.49.275.036/1002
Lens, square, transparent red, for LED: 5.49.275.036/1301
Lens, square, transparent yellow, for LED: 5.49.275.036/1402
Lens, square, transparent green, for LED: 5.49.275.036/1503
1-48
1
LUMO
75 (40)
LUMOTAST 75 IP40 - SIGNAL LAMPS WITH LAMP SOCKET T 4.5
PUSHBUTTONS
Diffuser, square, for LED, without legend: 5.73.013.000/0214
– Table (continued) –
LUMOTAST 75 IP40 - Signal lamp, square collar, protruding lens
Accessoires:
LUMOTAST 75 IP40 - Sealing cap for protection class IP 65, for 18 x 18 collar: 5.05.200.009/0000
LUMOTAST 75 IP40
Signal lamp, rectangular collar,
flush lens
Technical data see page 1 - 45
Panel cut-out
£Voltage limit max. Power limit
max.
Lamp socket Color of collar Order no. Note
35 V 1.2 W T 4.5 black 1.65.111.051/0000 Please include the desired lens and
diffuser in your order.
Lenses:
Lens, rectangular, transparent colorless, for LED: 5.49.275.032/1002
Lens, rectangular, transparent red, for LED: 5.49.275.032/1301
Lens, rectangular, transparent yellow, for LED: 5.49.275.032/1402
Lens, rectangular, transparent green, for LED: 5.49.275.032/1503
Diffuser, rectangular, for LED, without legend: 5.73.012.000/0214
Accessoires:
LUMOTAST 75 IP40 -Sealing cap for protection class IP65, for 18 x 24 collar: 5.05.200.008/0000
1-49
1
LUMO
75 (65)
LUMOTAST 75 IP65
PUSHBUTTONS
LUMOTAST 75 IP65
LUMOTAST 75 IP65 - Pushbutton range
Illuminated pushbuttons and signal lamps with lamp socket T 4.5
s Mounting hole diameter 16.2 mm
s Degree of protection IP65 acc. to DIN EN 60529
s Solder terminals for the following wire cross-sections:
- Installed 0.5 mm2 max.
- Factory terminated 0.35 mm2 max.
s 250 V/4 A max.
s 2 NC + 2 NO max.
s Illumination: LED / filament lamp
s All products are RoHS compliant.
1-50
1
LUMO
75 (65)
LUMOTAST 75 IP65
PUSHBUTTONS
Content
LUMOTAST 75 IP65 Illuminated pushbuttons 1 - 51
LUMOTAST 75 IP65 Illuminated pushbutton, flush lens, round collar 1 - 53
LUMOTAST 75 IP65 Illuminated pushbutton, protruding lens, round collar 1 - 53
LUMOTAST 75 IP65 Illuminated pushbutton, flush lens, square collar 1 - 54
LUMOTAST 75 IP65 Illuminated pushbutton, protruding lens, square collar 1 - 55
LUMOTAST 75 IP65 Illuminated pushbutton, flush lens, rectangular collar 1 - 55
LUMOTAST 75 IP65 Signal lamps 1 - 57
LUMOTAST 75 IP65 Signal lamp, flush lens, round collar 1 - 58
LUMOTAST 75 IP65 Signal lamp, protruding lens, round collar 1 - 59
LUMOTAST 75 IP65 Signal lamp, flush lens, rectangular collar 1 - 59
LUMOTAST 75 IP65 Signal lamp, protruding lens, square collar 1 - 60
LUMOTAST 75 IP65 Signal lamp, flush lens, square collar 1 - 61
1-51
1
LUMO
75 (65)
LUMOTAST 75 IP65 - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
LUMOTAST 75 IP65
Illuminated
pushbuttons
Mounting hole
Approvals
ENEC 25T70
without lamp,
25T55 with lamp
UL 508 C22.2
No. 14-M91
Technical Data
£General information
Form of lens see order block
Color of lens see order block
Form of collar see order block
Color of collar black
£Dimensions
Length of collar see order block
Diameter of collar see order block
Width of collar see order block
Overall height 10.5 mm
Mounting depth see order block
Mounting hole 16.2 mm
£Mechanical design
Mounting ring nut
Terminals solder terminals
Contact system snap-action bridge contact
Contact function see order block
Contact arrangement see order block
Contact materials Ag
Illumination LED / filament lamp
Lamp socket T 4.5
£Mechanical characteristics
Operating force 3 ... 6.5 N
Operating travel 2.5 mm
Switching travel NC 1.8 mm
Switching travel NO 0.9 mm
Robustness max. 100 N
£Electrical characteristics
Rated voltage AC max. 250 V
Rated voltage DC max. 230 V
Rated voltage AC/DC min. 12 V
Rated current AC max. 4 A
Rated current DC max. 0.2 A
Rated current AC/DC min. 5 mA
Contact resistance acc. to life max. 200 mE
Protection class II
ESD-strength min. 14 kV
£Other specifications
Operating life, at 250 V/2 A (operations) 200,000 (momentary), 50,000 (latching)
Operating life, at 250 V/4 A (operations) 60,000 (momentary)
Degree of protection from front side IP65 (DIN EN 60529)
Operation temperature min. -25 °C
1-52
1
LUMO
75 (65)
LUMOTAST 75 IP65 - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
Ambient temp. operating max. without
lamp /LED +70 °C
Ambient temp. operating max. with
lamp /LED +55 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
Weight 15 g
Flame class acc. to UL 94 V 0
Hot wire ignition acc. to IEC 60695-2-1 yes
ROHS compliant yes
REACH compliant yes
– Technical data (continued) –
LUMOTAST 75 IP65 - Illuminated pushbutton
Accessories LUMOTAST 75 IP65 - Illuminated pushbutton
£Description Photo Order no. Additional acces-
sories see page
Socket T 4.5, LED - 5 - 7
Socket T 4.5, LED superbright -5 - 7
Lamp extractor for lamp diameter 4 mm 1.90.900.002/0000 5 - 26
Lamp extractor for lamp diameter 5-6 mm 1.90.900.004/0000 5 - 26
Blanking cap, black, to cover spare holes,
dimensions 18 x 18 mm 5.52.006.020/0103 5 - 22
Blanking cap, black, to cover spare holes,
dimensions 18 x 24 mm 5.52.006.021/0100 5 - 22
Blanking cap, black, to cover spare holes, round 18 mm 5.52.006.022/0100 5 - 22
Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25
1-53
1
LUMO
75 (65)
LUMOTAST 75 IP65 - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
LUMOTAST 75 IP65
Illuminated pushbutton,
flush lens, round collar
Technical data see page 1 - 51
Mounting hole
£Contact arrangement Contact function Color of collar Order no. Note
1 NC + 1 NO momentary black 1.15.108.481/0000 Please include the desired lens in your
order.
1 NC + 1 NO latching black 1.15.108.981/0000 Please include the desired lens in your
order.
2 NC + 2 NO momentary black 1.15.108.482/0000 Please include the desired lens in your
order.
2 NC + 2 NO latching black 1.15.108.982/0000 Please include the desired lens in your
order.
Lenses:
Lens, round, transparent colorless, for LED: 5.49.259.013/1002
Lens, round, transparent red, for LED: 5.49.259.013/1301
Lens, round, transparent yellow, for LED: 5.49.259.013/1402
Lens, round, transparent green, for LED: 5.49.259.013/1503
Accessoires:
Legend insert, round, without legend: 5.70.059.000/2000
LUMOTAST 75 IP65
Illuminated pushbutton,
protruding lens, round collar
Technical data see page 1 - 51
Mounting hole
£Contact arrangement Contact function Color of collar Order no. Note
1 NC + 1 NO momentary black 1.15.108.476/0000 Please include the desired lens in your
order.
1-54
1
LUMO
75 (65)
LUMOTAST 75 IP65 - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
£Contact arrangement Contact function Color of collar Order no. Note
1 NC + 1 NO latching black 1.15.108.976/0000 Please include the desired lens in your
order.
2 NC + 2 NO momentary black 1.15.108.477/0000 Please include the desired lens in your
order.
2 NC + 2 NO latching black 1.15.108.977/0000 Please include the desired lens in your
order.
– Table (continued) –
LUMOTAST 75 IP65 - Illuminated pushbutton, protruding lens, round collar
Lenses:
Lens, round, transparent colorless, for LED: 5.49.259.013/1002
Lens, round, transparent red, for LED: 5.49.259.013/1301
Lens, round, transparent yellow, for LED: 5.49.259.013/1402
Lens, round, transparent green, for LED: 5.49.259.013/1503
Accessoires:
Legend insert, round, without legend: 5.70.059.000/2000
LUMOTAST 75 IP65
Illuminated pushbutton,
flush lens, square collar
Technical data see page 1 - 51
Mounting hole
£Contact arrangement Contact function Color of collar Order no. Note
1 NC + 1 NO momentary black 1.15.108.276/0000 Please include the desired lens in your
order.
1 NC + 1 NO latching black 1.15.108.376/0000 Please include the desired lens in your
order.
2 NC + 2 NO momentary black 1.15.108.277/0000 Please include the desired lens in your
order.
2 NC + 2 NO latching black 1.15.108.377/0000 Please include the desired lens in your
order.
Lenses:
Lens, square, transparent colorless, for LED: 5.49.277.052/1002
Lens, square, transparent red, for LED: 5.49.277.052/1301
Lens, square, transparent yellow, for LED: 5.49.277.052/1402
Lens, square, transparent green, for LED: 5.49.277.052/1503
Accessoires:
Legend insert, square, without legend: 5.70.629.000/2000
1-55
1
LUMO
75 (65)
LUMOTAST 75 IP65 - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
LUMOTAST 75 IP65
Illuminated pushbutton,
protruding lens, square collar
Technical data see page 1 - 51
Mounting hole
£Contact arrangement Contact function Color of collar Order no. Note
1 NC + 1 NO momentary black 1.15.108.281/0000 Please include the desired lens in your
order.
1 NC + 1 NO latching black 1.15.108.381/0000 Please include the desired lens in your
order.
2 NC + 2 NO momentary black 1.15.108.282/0000 Please include the desired lens in your
order.
2 NC + 2 NO latching black 1.15.108.382/0000 Please include the desired lens in your
order.
Lenses:
Lens, square, transparent colorless, for LED: 5.49.277.052/1002
Lens, square, transparent red, for LED: 5.49.277.052/1301
Lens, square, transparent yellow, for LED: 5.49.277.052/1402
Lens, square, transparent green, for LED: 5.49.277.052/1503
Accessoires:
Legend insert, square, without legend: 5.70.629.000/2000
LUMOTAST 75 IP65
Illuminated pushbutton,
flush lens, rectangular collar
Technical data see page 1 - 51
Panel cut-out
£Contact arrangement Contact function Color of collar Order no. Note
1 NC + 1 NO momentary black 1.15.108.076/0000 Please include the desired lens in your
order.
1-56
1
LUMO
75 (65)
LUMOTAST 75 IP65 - ILLUMINATED PUSHBUTTONS
PUSHBUTTONS
£Contact arrangement Contact function Color of collar Order no. Note
1 NC + 1 NO latching black 1.15.108.176/0000 Please include the desired lens in your
order.
2 NC + 2 NO momentary black 1.15.108.077/0000 Please include the desired lens in your
order.
2 NC + 2 NO latching black 1.15.108.177/0000 Please include the desired lens in your
order.
– Table (continued) –
LUMOTAST 75 IP65 - Illuminated pushbutton, flush lens, rectangular collar
Lenses:
Lens, rectangular, transparent colorless, for LED: 5.49.277.058/1002
Lens, rectangular, transparent red, for LED: 5.49.277.058/1301
Lens, rectangular, transparent yellow, for LED: 5.49.277.058/1402
Lens, rectangular, transparent green, for LED: 5.49.277.058/1503
Accessoires:
Legend insert, rectangular without legend: 5.70.630.000/2000
1-57
1
LUMO
75 (65)
LUMOTAST 75 IP65 - SIGNAL LAMPS
PUSHBUTTONS
LUMOTAST 75 IP65
Signal lamps
Mounting hole
Approvals
IEC 61058 UL 508 C22.2 No.
14-M91
Technical Data
£General information
Form of lens see order block
Form of collar see order block
Diameter of collar see order block
£Dimensions
Length of collar see order block
Width of collar see order block
Overall height 10.5 mm
Mounting depth 33.5 mm
Mounting hole 16.2 mm
£Mechanical design
Mounting ring nut
Terminals solder terminals
Lamp socket T 4.5
Lamp LED / filament lamp
£Electrical characteristics
Voltage limit max. 35 V
Power limit max. 1.2 W
£Other specifications
Degree of protection from front side IP65 (DIN EN 60529)
Weight 5 g
Operation temperature min. -25 °C
Ambient temp. operating max. +55 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
ROHS compliant yes
REACH compliant yes
Accessories LUMOTAST 75 IP65 - Signal lamp
£Description Photo Order no. Additional acces-
sories see page
Socket T 4.5, LED - 5 - 7
Socket T 4.5, LED superbright -5 - 7
Lamp extractor for lamp diameter 4 mm 1.90.900.002/0000 5 - 26
1-58
1
LUMO
75 (65)
LUMOTAST 75 IP65 - SIGNAL LAMPS
PUSHBUTTONS
£Description Photo Order no. Additional acces-
sories see page
Lamp extractor for lamp diameter 5-6 mm 1.90.900.004/0000 5 - 26
Blanking cap, black, to cover spare holes, dimensions 18 x 18
mm 5.52.006.020/0103 5 - 22
Blanking cap, black, to cover spare holes, dimensions 18 x 24
mm 5.52.006.021/0100 5 - 22
Blanking cap, black, to cover spare holes, round 18 mm 5.52.006.022/0100 5 - 22
Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25
– Table (continued) –
Accessories LUMOTAST 75 IP65 - Signal lamp
LUMOTAST 75 IP65
Signal lamp, flush lens,
round collar
Technical data see page 1 - 57
Mounting hole
£Voltage limit max. Power limit
max.
Lamp socket Form of collar Order no. Note
35 V 1.2 W T 4.5 round 1.65.111.096/0000 Please include the desired lens in your
order.
For assembly, press the lens as far as possible.
Lenses:
Lens, round, transparent colorless, for LED: 5.49.259.013/1002
Lens, round, transparent red, for LED: 5.49.259.013/1301
Lens, round, transparent yellow, for LED: 5.49.259.013/1402
Lens, round, transparent green, for LED: 5.49.259.013/1503
Accessoires:
Legend insert, round, without legend: 5.70.059.000/2000
1-59
1
LUMO
75 (65)
LUMOTAST 75 IP65 - SIGNAL LAMPS
PUSHBUTTONS
LUMOTAST 75 IP65
Signal lamp, protruding lens,
round collar
Technical data see page 1 - 57
Mounting hole
£Voltage limit max. Power limit
max.
Lamp socket Form of collar Order no. Note
35 V 1.2 W T 4.5 round 1.65.111.076/0000 Please include the desired lens in your
order.
For assembly, press the lens as far as possible.
Lenses:
Lens, round, transparent colorless, for LED: 5.49.259.013/1002
Lens, round, transparent red, for LED: 5.49.259.013/1301
Lens, round, transparent yellow, for LED: 5.49.259.013/1402
Lens, round, transparent green, for LED: 5.49.259.013/1503
Accessoires:
Legend insert, round, without legend: 5.70.059.000/2000
LUMOTAST 75 IP65
Signal lamp, flush lens,
rectangular collar
Technical data see page 1 - 57
Panel cut-out
£Voltage limit max. Power limit
max.
Lamp socket Form of collar Order no. Note
35 V 1.2 W T 4.5 rectangular 1.65.111.056/0000 Please include the desired lens in your
order.
For assembly, press the lens as far as possible.
1-60
1
LUMO
75 (65)
LUMOTAST 75 IP65 - SIGNAL LAMPS
PUSHBUTTONS
Lenses:
Lens, rectangular, transparent colorless, for LED: 5.49.277.058/1002
– Table (continued) –
LUMOTAST 75 IP65 - Signal lamp, flush lens, rectangular collar
Lens, rectangular, transparent red, for LED: 5.49.277.058/1301
Lens, rectangular, transparent yellow, for LED: 5.49.277.058/1402
Lens, rectangular, transparent green, for LED: 5.49.277.058/1503
Accessoires:
Legend insert, rectangular without legend: 5.70.630.000/2000
LUMOTAST 75 IP65
Signal lamp, protruding lens,
square collar
Technical data see page 1 - 57
Mounting hole
£Voltage limit max. Power limit
max.
Lamp socket Form of collar Order no. Note
35 V 1.2 W T 4.5 square 1.65.111.086/0000 Please include the desired lens in your
order.
For assembly, press the lens as far as possible.
Lenses:
Lens, square, transparent colorless, for LED: 5.49.277.052/1002
Lens, square, transparent red, for LED: 5.49.277.052/1301
Lens, square, transparent yellow, for LED: 5.49.277.052/1402
Lens, square, transparent green, for LED: 5.49.277.052/1503
Accessoires:
Legend insert, square, without legend: 5.70.629.000/2000
1-61
1
LUMO
75 (65)
LUMOTAST 75 IP65 - SIGNAL LAMPS
PUSHBUTTONS
LUMOTAST 75 IP65
Signal lamp, flush lens,
square collar
Technical data see page 1 - 57
Mounting hole
£Voltage limit max. Power limit
max.
Lamp socket Form of collar Order no. Note
35 V 1.2 W T 4.5 square 1.65.111.066/0000 Please include the desired lens in your
order.
For assembly, press the lens as far as possible.
Lenses:
Lens, square, transparent colorless, for LED: 5.49.277.052/1002
Lens, square, transparent red, for LED: 5.49.277.052/1301
Lens, square, transparent yellow, for LED: 5.49.277.052/1402
Lens, square, transparent green, for LED: 5.49.277.052/1503
Accessoires:
Legend insert, square, without legend: 5.70.629.000/2000
1-63
1
Key
Swit-
ches
OTHER KEYLOCK SWITCHES
PUSHBUTTONS
Other keylock
switches
Keylock switch for a mounting hole diameter of 16.2 mm
s 35 V max.
s 100 mA
s Design matches with LUMOTAST FK and LUMOTAST 75 IP40.
s All products are RoHS compliant.
1-64
1
Key
Swit-
ches
OTHER KEYLOCK SWITCHES
PUSHBUTTONS
Content
Keylock switches 1 - 65
Keylock switch round collar 1 - 66
Keylock switch rectangular collar 1 - 67
Priority keylock switches 1 - 68
Priority keylock switch round collar 1 - 69
Priority keylock switch rectangular collar 1 - 70
Keylock switch PCB plug-in socket 1 - 71
1-65
1
Key
Swit-
ches
KEYLOCK SWITCHES
PUSHBUTTONS
KEYLOCK SWITCHES
Mounting hole
with plug-in socket
PCB hole pattern, sight on component side
The locking systems we use are created according to DIN EN 1303 by
leading lock manufacturers. They are are open, mechanical systems that
require occasional maintenance of the machinery or plant operator
depending on environmental conditions.
£
Technical Data
£General information
Form of collar see order block
£Dimensions
Length of collar see order block
Diameter of collar see order block
Width of collar see order block
Overall height 7.5 mm
Mounting depth 39.5 mm; with plug-in socket 41.25 mm
Mounting hole 16.2 mm
£Mechanical design
Mounting ring nut
Terminals solder terminals
Contact system sliding contact, self cleaning
Contact function latching
Contact arrangement 1 NO at every switching position
Contact materials Au alloy
Illumination no
£Mechanical design of lock
Lock cylinder lock with pin tumblers
Wafers 5 pins
Lock type 5001
Number of locking positions 10,000
Main key on request
Symmetric key on request
Key removal position see order block
£Mechanical characteristics
Operating force min. 0.035 Nm
Operating force max. 1.8 Nm
£Electrical characteristics
Rated voltage AC/DC max. 35 V
Rated voltage AC/DC min. 5 V
Rated current AC/DC max. 100 mA
Rated current AC/DC min. 5 mA
ESD strength max. 12 kV
Insulation resistance 6 x 108 E
Contact resistance max. 200 mE
£Other specifications
Operating life (operations) 50,000
Degree of protection from front side IP65 (DIN EN 60529)
Operation temperature min. -25 °C
Ambient temp. operating max. +70 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
1-66
1
Key
Swit-
ches
KEYLOCK SWITCHES
PUSHBUTTONS
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
Soldering temperature max. 350 °C
Soldering time max. 3 s
Weight 29 g
Rotating angle see order block
ROHS compliant yes
REACH compliant yes
– Technical data (continued) –
Keylock switch
Accessories Keylock switch
£Description Photo Order no. Additional acces-
sories see page
Plug-in socket for PCB mounting 5.05.510.298/0000 1 - 71
Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25
Spare key (1 piece) 5.58.011.001/0000 -
Keylock switch
round collar
Technical data see page 1 - 65
Mounting hole
£Contact arrangement Contact function Rotating angle Key removal
position
Order no.
1 NO at every switching position latching 1 x 90° 0+1 1.10.118.612/0000
1 NO at every switching position latching 3 x 90° 0+1+2+3 1.10.118.814/0000
1 NO at every switching position latching 2 x 90° 0 1.10.118.513/0000
1 NO at every switching position latching 2 x 90° 0+1+2 1.10.118.713/0000
Included: 2 keys.
1-67
1
Key
Swit-
ches
KEYLOCK SWITCHES
PUSHBUTTONS
Keylock switch
rectangular collar
Technical data see page 1 - 65
max. 8.00
7.55
36.00
18x24
M16.00x1
3.50 10.40
16.20
2.00
Panel cut-out
£Contact arrangement Contact function Rotating angle Key removal
position
Order no.
1 NO at every switching position latching 1 x 90° 0+1 1.10.118.212/0000
1 NO at every switching position latching 3 x 90° 0+1+2+3 1.10.118.414/0000
1 NO at every switching position latching 2 x 90° 0+1+2 1.10.118.313/0000
Included: 2 keys.
1-68
1
Key
Swit-
ches
PRIORITY KEYLOCK SWITCHES
PUSHBUTTONS
with plug-in socket
PRIORITY
KEYLOCK SWITCHES
16.20
Panel cut-out
PCB hole pattern, sight on component side
The locking systems used in our switches are produced in accordance with
DIN EN 1303 by leading lock manufacturers. The locking systems in key
switches are open mechanical systems, which require occasional mainte-
nance of the machinery or plant operator, according to the ambient condi-
tions.
£
Technical Data
£General information
Form of collar see order block
£Dimensions
Length of collar see order block
Diameter of collar see order block
Width of collar see order block
Overall height 7.5 mm
Mounting depth 39.5 mm; with plug-in socket 41.25 mm
Mounting hole 16.2 mm
£Mechanical design
Mounting ring nut
Terminals solder terminals
Contact system sliding contact, self cleaning
Contact function latching
Contact arrangement 1 NO at every switching position
Contact materials Au alloy
Illumination no
£Mechanical design of lock
Lock cylinder lock with pin tumblers
Wafers 5 pins
Lock type 5001
Number of locking positions 10,000
Main key yes
Symmetric key yes
Key removal position see order block
£Mechanical characteristics
Operating force min. 0.035 Nm
Operating force max. 1.8 Nm
£Electrical characteristics
Rated voltage AC/DC max. 35 V
Rated voltage AC/DC min. 5 V
Rated current AC/DC max. 100 mA
Rated current AC/DC min. 5 mA
ESD strength max. 12 kV
Insulation resistance 6 x 108 E
Contact resistance max. 200 mE
£Other specifications
1-69
1
Key
Swit-
ches
PRIORITY KEYLOCK SWITCHES
PUSHBUTTONS
Operating life (operations) 50,000
Degree of protection from front side IP65 (DIN EN 60529)
Operation temperature min. -25 °C
Ambient temp. operating max. +70 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
Soldering temperature max. 350 °C
Soldering time max. 3 s
Weight 29 g
Rotating angle see order block
ROHS compliant yes
REACH compliant yes
– Technical data (continued) –
Priority keylock switch
Accessories Priority keylock switch
£Description Photo Order no. Additional acces-
sories see page
Plug-in socket for PCB mounting 5.05.510.298/0000 1 - 71
Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25
Set of spare keys (4 keys) for 3 x 90° type 5.58.099.010/0000 -
Set of spare keys (2 keys) for 2 x 90° type 5.58.099.011/0000 -
Priority keylock switch
round collar
Technical data see page 1 - 68
Mounting hole
£Contact arrangement Contact function Rotating angle Key removal
position
Order no.
1 NO at every switching position latching 3 x 90° 0 1.10.119.617/0000
1 NO at every switching position latching 3 x 90° 0+1+2+3 1.10.119.967/0000
1-70
1
Key
Swit-
ches
PRIORITY KEYLOCK SWITCHES
PUSHBUTTONS
£Contact arrangement Contact function Rotating angle Key removal
position
Order no.
1 NO at every switching position latching 2 x 90° 0 1.10.119.611/0000
– Table (continued) –
Priority keylock switch - round collar
Included with 2 x 90° type: 2 keys; with 3 x 90° type: 3 keys.
Key 1 switches to lock position 1, key 2 switches to lock positions 1 and 2, etc...
Priority keylock switch
rectangular collar
Technical data see page 1 - 68
max. 8.00
7.55
36.00
18x24
M16.00x1
3.50 10.40
16.20
2.00
Panel cut-out
£Contact arrangement Contact function Rotating angle Key removal
position
Order no.
1 NO at every switching position latching 3 x 90° 0 1.10.119.117/0000
1 NO at every switching position latching 3 x 90° 0+1+2+3 1.10.119.467/0000
1 NO at every switching position latching 2 x 90° 0 1.10.119.111/0000
Included with 2 x 90° type: 2 keys; with 3 x 90° type: 3 keys.
Key 1 switches to lock position 1, key 2 switches to lock positions 1 and 2, etc...
1-71
1
Key
Swit-
ches
PRIORITY KEYLOCK SWITCHES
PUSHBUTTONS
Keylock switch
PCB plug-in socket
Technical data see page 1 - 68
with plug-in socket
PCB hole pattern, sight on component side
£Description Order no.
Plug-in socket for PCB mounting 5.05.510.298/0000
1-73
1
Other
Pushb.
OTHER PUSHBUTTONS
PUSHBUTTONS
Other pushbuttons
s Various pushbuttons for mounting hole diameters from 9.1 mm to 22.3 mm.
s All products are RoHS compliant.
1-74
1
Other
Pushb.
OTHER PUSHBUTTONS
PUSHBUTTONS
Content
Pushbuttons non-illuminated 9.1 mm, 24 V / 100 mA 1 - 75
Pushbutton non-illuminated mounting hole diameter 9.1 mm, 24 V / 100 mA 1 - 76
Pushbuttons 9.1 mm, 24 V / 0.5 A 1 - 77
Pushbutton mounting hole diameter 9.1 mm, 24 V / 0.5 A 1 - 78
Pushbuttons non-illuminated 15.2 mm, 250 V / 0.7 A 1 - 79
Pushbutton non-illuminated mounting hole diameter 15.2 mm 1 - 80
Pushbuttons non-illuminated 16.2 mm, 250 V / 2 A 1 - 81
Pushbutton non-illuminated mounting hole diameter 16.2 mm, 250 V / 2 A 1 - 82
Pushbuttons non-illuminated 18.2 mm, 250 V / 2 A 1 - 83
Pushbutton non-illuminated mounting hole diameter 18.2 mm, 250 V / 2 A 1 - 84
Pushbuttons illuminable 20.3 mm, 250 V / 2 A 1 - 85
Pushbutton with lamp socket BA9s (MBC/MCC), mounting hole diameter 20.3 mm, 250 V / 2 A 1 - 86
LUMOTAST 22 E-Stop pushbuttons, 22.3 mm 1 - 87
LUMOTAST 22 E-Stop 1 - 88
1-75
1
Other
Pushb.
PUSHBUTTONS NON-ILLUMINATED - MOUNTING HOLE DIAMETER 9.1 MM
PUSHBUTTONS
PUSHBUTTONS
NON-ILLUMINATED
9.1 mm,
24 V / 100 mA
Panel cut-out
Technical Data
£General information
Form of lens protruding lens
Color of lens see order block
Form of collar round
£Dimensions
Diameter of collar 11 mm
Overall height 4.5 mm
Mounting depth 25.5 mm
Mounting hole 9.1 mm
£Mechanical design
Mounting ring nut
Terminals solder terminals
Contact system bridge contact
Contact function momentary
Contact arrangement 1 NO
Contact materials Ag
Illumination no
Lamp socket no
£Mechanical characteristics
Operating force max. 7 N
Operating travel 2 mm
Switching travel NO 1.3 mm
Robustness max. 100 N
£Electrical characteristics
Rated voltage AC max. 24 V
Rated voltage DC max. 24 V
Rated current max. 0.1 A
Contact resistance max. 200 mE
£Other specifications
Operating life (operations) 40,000
Degree of protection from front side IP40 (DIN EN 60529)
Operation temperature min. -25 °C
Ambient temp. operating max. +70 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
Weight 2 g
Soldering time max. 3 s
Soldering temperature max. 350 °C
ROHS compliant yes
REACH compliant yes
1-76
1
Other
Pushb.
PUSHBUTTONS NON-ILLUMINATED - MOUNTING HOLE DIAMETER 9.1 MM
PUSHBUTTONS
£Description Photo Order no. Additional acces-
sories see page
Fixing spanner M 9, M 10 5.58.002.025/0105 5 - 25
Pushbutton non-illuminated
mounting hole diameter 9.1 mm,
24 V / 100 mA
Technical data see page 1 - 75
Panel cut-out
£Contact arrangement Contact function Color of lens Order no.
1 NO momentary opaque red 1.10.107.011/0301
1 NO momentary opaque yellow 1.10.107.011/0404
1 NO momentary opaque green 1.10.107.011/0507
1 NO momentary opaque white 1.10.107.011/0205
1 NO momentary opaque black 1.10.107.011/0104
Accessories Pushbutton non-illuminated - 9.1 mm, 24 V / 100 mA
1-77
1
Other
Pushb.
PUSHBUTTONS ILLUMINATED - MOUNTING HOLE DIAMETER 9.1 MM
PUSHBUTTONS
PUSHBUTTONS
9.1 mm, 24 V / 0.5 A
Panel cut-out
Technical Data
£General information
Form of lens protruding lens
Color of lens see order block
Form of collar round
£Dimensions
Diameter of collar 11 mm
Overall height 7 mm
Mounting depth 25 mm
Mounting hole 9.1 mm
£Mechanical design
Mounting ring nut
Terminals solder terminals
Contact system bridge contact
Contact function momentary
Contact arrangement 1 NC + 1 NO
Contact materials Au
Illumination see order block
Lamp socket no
£Mechanical characteristics
Operating force max. 5 N
Operating travel 1.5 mm
Switching travel NC 0.5 mm
Switching travel NO 1 mm
Robustness max. 100 N
£Electrical characteristics
Rated voltage AC/DC max. 24 V
Rated voltage DC max. 24 V
Rated current max. 0.5 A
Contact resistance when new max. 50 mE
Contact resistance acc. to life max. 300 mE
Bouncing time max. 10 ms
Lamp voltage see order block
£Other specifications
Operating life key switch 200,000
Degree of protection from front side IP40 (DIN EN 60529)
Operation temperature min. -25 °C
Ambient temp. operating max. +70 °C, LED +55 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
Soldering temperature max. 350 °C
Soldering time max. 3 s
Weight 3 g
LED operating voltage see order block
LED forward current see order block
LED forward voltage see order block
LED reverse voltage see order block
LED reverse current see order block
LED power dissipation see order block
LED series resistor 5-7 V see order block
LED series resistor 12-14 V see order block
LED series resistor 24-28 V see order block
ROHS compliant yes
REACH compliant yes
1-78
1
Other
Pushb.
PUSHBUTTONS ILLUMINATED - MOUNTING HOLE DIAMETER 9.1 MM
PUSHBUTTONS
Accessories Pushbutton - 9.1 mm, 24 V / 0.5 A
£Description Photo Order no. Additional acces-
sories see page
Fixing spanner M 9, M 10 5.58.002.025/0105 5 - 25
Pushbutton
mounting hole diameter 9.1 mm,
24 V / 0.5 A
Technical data see page 1 - 77
Panel cut-out
£Contact arrangement Contact function Illumination Color of lens Order no.
1 NC + 1 NO momentary no opaque red 1.15.106.301/0313
1 NC + 1 NO momentary no opaque yellow 1.15.106.301/0410
1 NC + 1 NO momentary no opaque green 1.15.106.301/0518
1 NC + 1 NO momentary no opaque white 1.15.106.301/0214
1 NC + 1 NO momentary no opaque black 1.15.106.301/0104
1 NC + 1 NO momentary LED super bright red transparent red 1.15.106.501/1300
1 NC + 1 NO momentary LED super bright yellow transparent yellow 1.15.106.503/1400
1 NC + 1 NO momentary LED super bright green transparent green 1.15.106.502/1500
1 NC + 1 NO momentary LED super bright blue transparent blue 1.15.106.504/1600
1 NC + 1 NO momentary LED superbright white transparent white 1.15.106.505/1000
Recommended values for external series resistor for LED
s 5 - 7 V = 270 E, 0.25 W
s 12 - 14 V = 680 E, 0.5 W
s 24 - 28 V = 1500 E, 1 W
LED forward current: max. 10 mA at T = 25° C
LED forward voltage: 2V at 10 mA
LED reverse voltage: 5 V
LED reverse current: 0,1 mA
LED power dissipation: max. 120 mW at T = 50° C
Contact arangement: 1-2 = NC, 3-4 = NO, X1-X2 = LED. Please note: connect plus with the LED anode, which is marked with a color
point.
1-79
1
Other
Pushb.
PUSHBUTTONS NON-ILLUMINATED - MOUNTING HOLE DIAMETER 15.2 MM
PUSHBUTTONS
PUSHBUTTONS
NON-ILLUMINATED
15.2 mm,
250 V / 0.7 A
Panel cut-out
Approvals
ENEC 25T85
Technical Data
£General information
Form of lens protruding lens
Color of lens see order block
Form of collar round
£Dimensions
Diameter of collar 19 mm
Overall height 8.2 mm
Mounting depth 21.5 mm
Mounting hole 15.2 mm
£Mechanical design
Mounting ring nut
Terminals see order block
Contact system bridge contact
Contact function momentary
Contact arrangement see order block
Contact materials Ag
Illumination no
Lamp socket no
£Mechanical characteristics
Operating force max. 7.5 N
Operating travel 3 mm
Switching travel NC 1.2 mm
Switching travel NO 2.0 mm
Robustness max. 100 N
£Electrical characteristics
Rated voltage AC max. 250 V
Rated current max. 0.7 A
Contact resistance when new max. 50 mE
Contact resistance acc. to life max. 300 mE
£Other specifications
Operating life (operations) 25,000
Degree of protection from front side IP40 acc. to DIN EN 60529
(IP65 with sealing cap)
Operation temperature min. -25 °C
Ambient temp. operating max. +85 °C
Storage temperature min. -40 °C
Storage temperature max. +90 °C
Environmental resistance acc. to IEC 60068-2-14, -30, -33 and -78
Weight 7 g
Flame class acc. to UL 94 V 0
Hot wire ignition acc. to IEC 60695-2-1 yes
ROHS compliant yes
REACH compliant yes
1-80
1
Other
Pushb.
PUSHBUTTONS NON-ILLUMINATED - MOUNTING HOLE DIAMETER 15.2 MM
PUSHBUTTONS
Accessories Pushbutton non-illuminated - 15.2 mm, 250 V / 0.7 A
£Description Photo Order no. Additional acces-
sories see page
Sealing cap, transparent, for protection acc. to IP65 5.52.008.115/0000 -
Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25
Pushbutton non-illuminated
mounting hole diameter 15.2 mm
Technical data see page 1 - 79
Panel cut-outscrew terminals
£Contact arrangement Contact function Color of lens Terminals Order no.
1 NO momentary opaque red screw terminals 1.10.001.001/0301
1 NO momentary opaque red solder/quick connector 6.3x0.8 / 2x 2.8x0.8mm 1.10.001.011/0301
1 NO momentary opaque green screw terminals 1.10.001.001/0507
1 NO momentary opaque green solder/quick connector 6.3x0.8 / 2x 2.8x0.8mm 1.10.001.011/0507
1 NO momentary opaque white screw terminals 1.10.001.001/0205
1 NO momentary opaque white solder/quick connector 6.3x0.8 / 2x 2.8x0.8mm 1.10.001.011/0205
1 NO momentary opaque black screw terminals 1.10.001.001/0104
1 NO momentary opaque black solder/quick connector 6.3x0.8 / 2x 2.8x0.8mm 1.10.001.011/0104
1 NC momentary opaque red screw terminals 1.10.001.151/0301
1 NC momentary opaque red solder/quick connector 6.3x0.8 / 2x 2.8x0.8mm 1.10.001.161/0301
1 NC momentary opaque black screw terminals 1.10.001.151/0104
1 NC momentary opaque black solder/quick connector 6.3x0.8 / 2x 2.8x0.8mm 1.10.001.161/0104
Quick-connector 6.3 x 0.8 mm. The connector is splitted and also usable for two connectors 2.8 x 0.8 mm.
1-81
1
Other
Pushb.
PUSHBUTTONS NON-ILLUMINATED - MOUNTING HOLE DIAMETER 16.2 MM
PUSHBUTTONS
PUSHBUTTONS
NON-ILLUMINATED
16.2 mm, 250 V / 2 A
Panel cut-out
Approvals
Technical Data
£General information
Form of lens protruding lens
Color of lens see order block
Form of collar round
£Dimensions
Diameter of collar 20 mm
Overall height 9 mm
Mounting depth 41 mm
Mounting hole 16.2 mm
£Mechanical design
Mounting ring nut
Terminals screw terminals
Contact system bridge contact
Contact function momentary
Contact arrangement see order block
Contact materials Ag
Illumination no
Lamp socket no
£Mechanical characteristics
Operating force max. 7.5 N
Operating travel 4.3 mm
Switching travel NC 1.3 mm
Switching travel NO 2.2 mm
Robustness max. 100 N
£Electrical characteristics
Rated voltage AC max. 250 V
Rated current max. 2 A
Contact resistance when new max. 100 mE
£Other specifications
Operating life (operations) 150,000
Degree of protection from front side IP40 acc. to DIN EN 60529
(IP65 with sealing cap)
Operation temperature min. -25 °C
Ambient temp. operating max. +85 °C
Storage temperature min. -40 °C
Storage temperature max. +90 °C
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
Weight 11 g
Flame class acc. to UL 94 V 0
Hot wire ignition acc. to IEC 60695-2-1 yes
ROHS compliant yes
REACH compliant yes
Accessories Pushbutton non-illuminated - 16.2 mm, 250 V / 2 A
£Description Photo Order no. Additional acces-
sories see page
Sealing cap, black, for protection acc. to IP65 5.52.008.101/0100 -
1-82
1
Other
Pushb.
PUSHBUTTONS NON-ILLUMINATED - MOUNTING HOLE DIAMETER 16.2 MM
PUSHBUTTONS
£Description Photo Order no. Additional acces-
sories see page
Sealing cap, red, for protection acc. to IP65 5.52.008.101/0300 -
Protective sleeve for terminals 5.52.011.026/0100 -
Protection against contact to VBG 4 5.55.101.715/0200 5 - 31
Fixing spanner M 15, M 16 5.58.002.019/0105 5 - 25
– Table (continued) –
Accessories Pushbutton non-illuminated - 16.2 mm, 250 V / 2 A
Pushbutton non-illuminated
mounting hole diameter 16.2 mm,
250 V / 2 A
Technical data see page 1 - 81
Panel cut-out
£Contact arrangement Contact function Color of lens Order no.
1 NO momentary opaque red 1.10.102.001/0301
1 NO momentary opaque green 1.10.102.001/0507
1 NO momentary opaque white 1.10.102.001/0205
1 NO momentary opaque black 1.10.102.001/0104
1 NC momentary opaque red 1.10.102.011/0301
1 NC momentary opaque black 1.10.102.011/0104
1-83
1
Other
Pushb.
PUSHBUTTONS NON-ILLUMINATED - MOUNTING HOLE DIAMETER 18.2 MM
PUSHBUTTONS
PUSHBUTTONS
NON-ILLUMINATED
18.2 mm, 250 V / 2 A
Mounting hole
Approvals
Technical Data
£General information
Form of lens protruding lens
Color of lens see order block
Form of collar round
£Dimensions
Diameter of collar 22 mm
Overall height 10.5 mm
Mounting depth 34 mm
Mounting hole 18.2 mm
£Mechanical design
Mounting ring nut
Terminals see order block
Contact system sliding bridge contact
Contact function momentary
Contact arrangement see order block
Contact materials Ag
Illumination no
Lamp socket no
£Mechanical characteristics
Operating force max. 9.5 N
Operating travel 5 mm
Switching travel NC 2.1 mm
Switching travel NO 3.7 mm
Robustness max. 100 N
£Electrical characteristics
Rated voltage AC max. 250 V
Rated current max. 2 A
Contact resistance acc. to life max. 200 mE
£Other specifications
Operating life (operations) 50,000
Degree of protection from front side IP40 acc. to DIN EN 60529
(IP65 with sealing cap)
Operation temperature min. -25 °C
Ambient temp. operating max. +85 °C
Storage temperature min. -40 °C
Storage temperature max. +90 °C
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
Weight 14 g
Flame class acc. to UL 94 V 0
Hot wire ignition acc. to IEC 60695-2-1 yes
ROHS compliant yes
REACH compliant yes
Accessories Pushbutton non-illuminated - 18.2 mm, 250 V / 2 A
£Description Photo Order no. Additional acces-
sories see page
Neoprene sealing cap, black, for protection acc. to IP65 5.52.008.061/0100 -
1-84
1
Other
Pushb.
PUSHBUTTONS NON-ILLUMINATED - MOUNTING HOLE DIAMETER 18.2 MM
PUSHBUTTONS
£Description Photo Order no. Additional acces-
sories see page
Silicone sealing cap, for protection acc. to IP65 5.52.008.065/0000 -
Protective sleeve for terminals 5.52.011.028/0100 -
Fixing spanner M 18, M 19 5.58.002.017/0105 5 - 25
– Table (continued) –
Accessories Pushbutton non-illuminated - 18.2 mm, 250 V / 2 A
Pushbutton non-illuminated
mounting hole diameter 18.2 mm,
250 V / 2 A
Technical data see page 1 - 83
Mounting hole
£Contact arrangement Color of lens Order no.
2 NO opaque red 1.01.102.001/0301
2 NO opaque green 1.01.102.001/0507
2 NO opaque black 1.01.102.001/0104
1 NC + 1 NO opaque red 1.01.102.011/0301
1 NC + 1 NO opaque green 1.01.102.011/0507
1 NC + 1 NO opaque white 1.01.102.011/0205
1 NC + 1 NO opaque black 1.01.102.011/0104
1-85
1
Other
Pushb.
PUSHBUTTON ILLUMINABLE - MOUNTING HOLE DIAMETER 20.3 MM, BA9S
PUSHBUTTONS
PUSHBUTTONS
ILLUMINABLE
20.3 mm,
250 V / 2 A
Mounting hole
Approvals
Technical Data
£General information
Form of lens protruding lens
Color of lens see order block
Form of collar round
£Dimensions
Diameter of collar 24 mm
Overall height 9 mm
Mounting depth 45.5 mm
Mounting hole 20.3 mm
£Mechanical design
Mounting ring nut
Terminals solder/quick connect terminals
2.8 x 0.8 mm
Contact system bridge contact
Contact function momentary
Contact arrangement see order block
Contact materials Ag
Illumination yes
Lamp socket BA 9 s
£Mechanical characteristics
Operating force max. 10 N
Operating travel 3.6 mm
Switching travel NC 0.8 mm
Switching travel NO 2.9 mm
Robustness max. 100 N
£Electrical characteristics
Rated voltage AC max. 250 V
Rated current max. 2 A
Contact resistance acc. to life max. 200 mE
£Other specifications
Operating life (operations) 100,000
Degree of protection from front side IP40 acc. to DIN EN 60529
(IP65 with sealing cap)
Operation temperature min. -25 °C
Ambient temp. operating max. +85 °C
Storage temperature min. -40 °C
Storage temperature max. +90 °C
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
Weight 18 g
Flame class acc. to UL 94 V 0
Hot wire ignition acc. to IEC 60695-2-1 yes
ROHS compliant yes
REACH compliant yes
1-86
1
Other
Pushb.
PUSHBUTTON ILLUMINABLE - MOUNTING HOLE DIAMETER 20.3 MM, BA9S
PUSHBUTTONS
Accessories Pushbutton illuminable - 20.3 mm, 250 V / 2 A
£Description Photo Order no. Additional acces-
sories see page
LED BA 9s (MBC/MCC) superbright, red, 24 V 1.90.690.341/0000 5 - 8
LED BA 9s (MBC/MCC) superbright, green, 24 V 1.90.690.342/0000 5 - 8
LED BA 9s (MBC/MCC) superbright, yellow, 24 V 1.90.690.343/0000 5 - 8
LED BA 9s (MBC/MCC) superbright, blue, 24 V 1.90.690.344/0000 5 - 8
LED BA 9s (MBC/MCC) superbright, white, 24 V 1.90.690.345/0000 5 - 8
Silicone sealing cap, for protection acc. to IP65 5.52.008.065/0000 -
Protective sleeve for terminals 5.52.011.030/0100 -
Fixing spanner M 20, M 22, for ring nut 5.58.002.018/0105 5 - 25
Pushbutton with
lamp socket BA9s
(MBC/MCC), mounting hole
diameter 20.3 mm, 250 V / 2 A
Technical data see page 1 - 85
Mounting hole
£Contact arrangement Contact function Order no. Note
1 NO momentary 1.15.112.101/0000 Please include the desired lens in your
order.
1 NC + 1 NO momentary 1.15.112.121/0000 Please include the desired lens in your
order.
Lenses:
Lens, transparent colorless: 5.49.205.008/1002
Lens, transparent red: 5.49.205.008/1303
Lens, transparent yellow: 5.49.205.008/1402
Lens, transparent green: 5.49.205.008/1502
1-87
1
Other
Pushb.
LUMOTAST 22 - E-STOP, MOUNTING HOLE DIAMETER 22.3 MM
PUSHBUTTONS
LUMOTAST
22 E-STOP PUSH-
BUTTONS, 22.3 MM
W
W
W
W
W
·
·
25.9
±
0.3
17.6
±
0.3
9.1
ø
29.6
±
0.2
1 - 4.5
33, 34
oder / or
X1, X2
Flachstecker / quick connect terminals
2.8 x 0.8 mm
Panel cut-out to IEC 60947-5-1
Approvals
The emergency stop pushbuttons comply with IEC 60 204, IEC 60 073, IEC
60 947 and VDE 0113 Part 1.
They are designed dupe-proof according to EN 418 with a positive mecha-
nical movement sequence. A certain operating force must be exerted at the
action point in order to prevent inadvertent operation. The pushbutton lat-
ches when pressed.
The special shape of the actuator prevents the emergency stop pushbutton
from being blocked. This means that the emergency stop process - once
initiated - cannot be impeded by any jamming objects.
Original manual see „Appendix“
£
Technical Data
£General information
Form of lens conical mushroom form
Color of lens red
Form of collar round
£Dimensions
Mushroom Diameter 30 mm
Overall height 25.9 mm
Mounting depth 17.6 mm
Mounting hole 22.3 mm
£Mechanical design
Mounting ring nut
Terminals quick connector 2.8 x 0.8 mm,
solderable
Torque for nut ring 1.9 Nm
Contact function latching
Contact arrangement see order block
Illuminability see order block
Reset by rotation
£Mechanical characteristics
Robustness max. 100 N
£Electrical characteristics acc. to
IEC/EN 60947-5-1 (VDE 0660 Part 200)
Application category AC15/DC13
Rated insulation voltage Ui250V (AC/DC)
Rated operating voltage Ue250V AC, 240V DC
{Term. Dauerstrom} 2.5A (AC/DC)
£Other specifications
Ambient temp. operating min. -25 °C
Ambient temp. operating max. +70 °C
Robustness acc. to IEC 600 68-2-3 und 2-30
Operating life (operations) / B10 15,000
Degree of protection from front side IP65 (DIN EN 60529)
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78
Salt spray IEC 600 68-2-11
Solder techniques manual soldering, lead-free
Soldering temperature max. 350 °C
Soldering time max. 5 s
ROHS compliant yes
REACH compliant yes
1-88
1
Other
Pushb.
LUMOTAST 22 - E-STOP, MOUNTING HOLE DIAMETER 22.3 MM
PUSHBUTTONS
Accessories LUMOTAST 22 E-Stop, 22.3 mm
£Description Photo Order no. Additional acces-
sories see page
Fixing spanner for ring nut 5.05.800.062/0000 2 - 145, 2 - 261,
5 - 25
W
W
W
W
·
·
LUMOTAST 22 E-Stop
Technical data see page 1 - 87
25.9
±
0.3
17.6
±
0.3
9.1
ø
29.6
±
0.2
1 - 4.5
33, 34
oder / or
X1, X2
Flachstecker / quick connect terminals
2.8 x 0.8 mm
Panel cut-out to IEC 60947-5-1
£Contact arrangement Illuminability Degree of protection from front side Order no.
2 NC + 1 NO no IP65 (DIN EN 60529) 1.15.105.021/0000
2 NC arrows with 2 LED IP65 (DIN EN 60529) 1.15.105.011/0000
2 NC no IP65 (DIN EN 60529) 1.15.105.001/0000
