1
CSM_E3Z-LS_DS_E_3_1
Distance-settable Photoelectric Sensor
E3Z-LS
Reliable Detection of Glossy, Uneven
Objects Regardless of Background or
Color.
• Switching between background and foreground suppression (BGS/
FGS) enables detecting a variety of objects under various
background/foreground conditions.
• Unique algorithm minimizes external interference from inverter
fluorescent lighting.
• Minimal differential travel to enable detecting small steps.
• Provides a high degree of protection (IP67), mutual interference
prevention, and EN standard compliance.
Be sure to read Safety Precautions on
page 8.
Ordering Information
Sensors (Refer to Dimensions on page 10.)
*1. Models with a 0.5-m cable are available. When ordering, specify the cable length by adding the code "0.5M" to the model number ( e.g., E3Z-LS61 0.5M).
*2. The following table shows the model numbers of e-CON Pre-wired Connectors that are available. The Ratings and Specifications are the same as those for the
E3Z-LS61.
Accessories (Order Separately)
Mounting Brackets
Sensor I/O Connectors (Refer to Dimensions on XS3)
Sensing
method Appearance Connection method Sensing distance (whi te paper) Model
NPN output PNP output
Distance-
settable
Pre-wired (2 m) *1E3Z-LS61 2M *2E3Z-LS81 2M
Connector (M8, 4 pins) E3Z-LS66 E3Z-LS86
Pre-wired (2 m) *1E3Z-LS63 2M E3Z-LS83 2M
Connector (M8, 4 pins) E3Z-LS68 E3Z-LS88
Cable length Model
0.3 m E3Z-LS61-ECON 0.3M
0.5 m E3Z-LS61-ECON 0.5M
2 m E3Z-LS61-ECON 2M
Red light
40 mm20 mm 200 mm
BGS (at min. setting)
FGS (at max. setting)
BGS (at max. setting)
FGS (at min. setting)
Incident light
level threshold
(fixed)
BGS (at min. setting)
20 mm2 mm 80 mm
BGS (at max. setting)
Cable specification Appearance Type of cable Model
Standard M8 cable
Straight 2 m
4-wire
XS3F-M421-402-A
5 m XS3F-M421-405-A
L-shaped 2 m XS3F-M422-402-A
5 m XS3F-M422-405-A
2
E3Z-LS
Ratings and Specifications
Sensing method Distance-settable
Model NPN output E3Z-LS61 E3Z-LS66 E3Z-LS63 E3Z-LS68
Item PNP output E3Z-LS81 E3Z-LS86 E3Z-LS83 E3Z-LS88
Sensing
distance
BGS White or black paper (100 × 100 mm): 20 mm to set dis-
tance 2 mm to set distance (80 mm max.)
FGS
White paper (100 × 100 mm): Set distance to 200 mm
min.
Black paper (100 × 100 mm): Set distance to 160 mm
min. -----
Setting range White paper (100 × 100 mm): 40 to 200 mm
Black paper (100 × 100 mm): 40 to 160 mm White paper (100 × 100 mm): 20 to 80 mm
Differential travel 10% of set distance max. (Refer to Differential Travel
vs. Sensing Distance on page 4.) 2% of set distance max.
Reflectivity characteristic
(black/white error) 10% of set distance max. 5% of set distance max.
Light source (wavelength) Red LED (680 nm) Red LED (650 nm)
Power supply voltage 12 to 24 VDC ±10%, ripple (p-p): 10% max.
Current consumption 30 mA max.
Control output Load power supply voltage: 26.4 VDC max., Load current: 100 mA max. (residual voltage 1 V max.),
Open collector output (NPN or PNP depending on model)
Light-ON/Dark-ON switch selectable
BGS/FGS selection BGS: Open or connected to GND
FGS: Connected to Vcc BGS: Open or connected to GND
Protection circuits Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention
Response time Operate or reset: 1 ms max.
Distance setting 5-turn endless adjuster
Ambient illumination
(Receiver side) Incandescent lamp: 3,000 lx max.; Sunlight: 10,000 lx max.
Ambient temperature range Operating: −25 to 55°C, Storage: −40 to 70°C (with no icing or condensation)
Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance 20 MΩ min. at 500 VDC
Dielectric strength 1,000 VAC at 50/60 Hz for 1 minute
Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions
Degree of protection IP67 (IEC 60529)
Connection method Pre-wired (standard
lengths: 2 m and 0.5 m) Connector (M8, 4 pins) Pre-wired (standard
lengths: 2 m and 0.5 m) Connector (M8, 4 pins)
Indicators Operation indicator (orange), Stability indicator (green)
Weight (packed state) Pre-wired Sensors, 2 m:
Approx. 65 g Approx. 20 g Pre-wired Sensors, 2 m:
Approx. 65 g Approx. 20 g
Material Case PBT (polybutylene terephthalate)
Lens Modified polyarylate resin
Accessories Instruction manual (Mounting Brackets must be ordered separately.)
E3Z-LS
3
Engineering Data
Operating Range
E3Z-LS@1/LS@6
BGS FGS E3Z-LS@3/LS@8
Spot Diamete r vs . Se ns ing Distance
E3Z-LS@1/LS@6E3Z-LS@3/LS@8
Close-range Characteristics
E3Z-LS@1/LS@6E3Z-LS@3/LS@8
8
6
4
2
0
−2
−4
−6
−8
Distance X (mm)
50 100 150 200 250
200-mm setting
40-mm setting
Set distance: 40 mm, 200 mm
Sensing object: White paper,
100 x 100 mm
X
Y
Operating range Y (mm)
20
15
10
5
0
−5
−10
−15
−20
200 400 600 800
200-mm setting
40-mm setting
X
Y
Distance
X (mm)
Set distance: 40 mm, 200 mm
Sensing object: White paper,
100 x 100 mm
Operating range Y (mm)
3
2
1
0
−1
−2
−3
20 3010 40 50 60 70 80 90
Distance
X (mm)
Set distance: 80 mm
Sensing object: White paper, 100 x 100 mm
Operating range Y (mm)
20
18
16
14
12
10
8
6
4
2
Sensing distance (mm)
030025020015010050
Spot diameter (mm)
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
08030 605040 7020 Sensing distance (mm)
Spot diameter (mm)
250
200
150
100
50
0
Material
4 mm9 mm
199 mm
9 mm
185 mm
0 mm
40 mm
White paper White paper Black paper Black paper
36 mm
Sensing distance (mm)
Set distance: 40 mm
Set distance: 200 mm
90
80
70
60
50
40
30
20
10
0
4.8mm0mm
80.1mm
12.6mm
79.6mm
0mm
20.2mm 20.1mm
White paper
Sensing distance (mm)
Set distance: 80 mmSet distance: 20 mm
Material
White paper Black paper Black paper
4
E3Z-LS
Differential Travel vs. Sensing Distance
E3Z-LS@1/LS@6E3Z-LS@3/LS@8
Sensing Object Angle Characteristics
E3Z-LS@1/LS@6
Vertical Horizontal
E3Z-LS@3/LS@8
Vertical Horizontal
10
9
8
7
6
5
4
3
2
1
Sensin
g
distance
(
mm
)
250200150100500
Black paper
White paper
Differential travel (%)
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
100806040200.0 Sensing distance (mm)
Black paper
White paper
Differential travel (%)
20
15
10
5
0
−5
−10
−15
−20
Inclination θ (°)
−40 −30 −20 −10 0 10 20 30 40
200-mm set distance
40-mm set distance
Set distance: 40 mm, 200 mm
Sensing object: White paper,
100 mm x 100 mm
−θ
+θ
Center
line
Sensing
object
Vertical
Inclination
Rate of sensing distance change (%)
20
15
10
5
0
−5
−10
−15
−20
−40 −30 −20 −10 0 10 20 30 40
Inclination θ (°)
200-mm set distance
40-mm set distance
Set distance: 40 mm, 200 mm
Sensing object: White paper,
100 mm x 100 mm
Center
line
Sensing
object
Rate of sensing distance change (%)
−θ
+θ
Horizontal
Inclination
20
15
10
5
0
−5
−10
−15
−20
−40 −30 −20 −10 0 10 20 30 40
Inclination θ (°)
20-mm set distance
80-mm set distance
Set distance: 20 mm, 80 mm
Sensing object: White paper,
100 mm x 100 mm
Center
line
Rate of sensing distance change (%)
+θ −θ
Center
line
Sensing
object
Inclination
Vertical
20
15
10
5
0
−5
−10
−15
−20
−40 −30 −20 −10 0 10 20 30 40
Inclination θ (°)
80-mm set distance
20-mm set distance
Set distance: 20 mm, 80 mm
Sensing object: White paper,
100 mm x 100 mm
Rate of sensing distance change (%)
Center
line
Sensing
object
Horizontal
Inclination
+θ −θ
E3Z-LS
5
FGS Mode Set Distance
E3Z-LS@1/LS@6
White Paper Black Paper
Sensing Distance vs. Sensing Object Material
E3Z-LS@1/LS@6
Set Distance of 40 mm using White Paper Set Distance of 200 mm using White Paper
E3Z-LS@3/LS@8
Set Distance of 20 mm using White Paper Set Distance of 80 mm using White Paper
800
700
600
500
400
300
200
100
Set distance (mm)
300250200150100500
Sensing range (mm)
800
700
600
500
400
300
200
100
300250200150100500 Set distance (mm)
Sensing range (mm)
50
40
30
20
10
0
Material
White
paper Veneer Card-
board Black
paper Black
rubber SUS Mirror
surface
Sensing distance (mm)
240
200
160
120
80
40
0
Material
White
paper Veneer Card-
board Black
paper Black
rubber SUS Mirror
surface
Sensing distance (mm)
30
20
10
0
Material
White
paper VeneerCard-
board
Black
paper Black
rubber
SUS Mirror
surface
Sensing distance (mm)
100
80
60
40
20
0
Material
White
paper VeneerCard-
board
Black
paper Black
rubber
SUS Mirror
surface
Sensing distance (mm)
6
E3Z-LS
I/O Circuit Diagrams
NPN Output
NEAR FAR VERY FAR
Only for FGS mode
Distance threshold
(set distance) Incident light level
threshold (not settable)
Note: The VERY FAR region is supported only for FGS.
The incident light level threshold is fixed and cannot be set.
Model Operation
mode Timing charts Operation
selector
BGS/FGS
selection
method Output circuit
E3Z-LS61
E3Z-LS66
E3Z-LS63
E3Z-LS68
Light-ON L side
(LIGHT
ON) BGS:
Either leave
the pink
wire (2)
open or
connect it to
the blue
wire (3).
Dark-ON D side
(DARK ON)
E3Z-LS61
E3Z-LS66
Light-ON L side
(LIGHT
ON) FGS:
Connect
the pink
wire (2) to
the brown
wire (1).
Dark-ON D side
(DARK ON)
ON
OFF
ON
OFF
ON
OFF
Operation
indicator
(orange)
(Between brown and black leads)
Output
transistor
Load
(e.g., relay)
NEAR FAR
Connector Pin
Arrangement e-CON Connector
Pin Arrangement
1
2
3
4
1243
FGS
BGS
4
2
1
3
100 mA
max.
12 to 24 VDC
0 V
Blue
Brown
Black
Pink Load (relay)
Operation
indicator
(orange)
Stability
indicator
(green)
(Control output)
ZD
Photo-
electric
Sensor
Main
Circuit
ON
OFF
ON
OFF
ON
OFF
NEAR FAR
Operation
indicator
(orange)
(Between brown and black leads)
Output
transistor
Load
(e.g., relay)
ON
OFF
ON
OFF
ON
OFF
NEAR FAR
VERY FAR
Operation
indicator
(orange)
(Between brown and black leads)
Output
transistor
Load
(e.g., relay)
ON
OFF
ON
OFF
ON
OFF
NEAR FAR
VERY FAR
Operation
indicator
(orange)
(Between brown and black leads)
Output
transistor
Load
(e.g., relay)
E3Z-LS
7
PNP Output
Plugs (Sensor I/O Connectors)
Nomenclature
Model Operation
mode Timing charts Operation
selector
BGS/FGS
selection
method Output circuit
E3Z-LS81
E3Z-LS86
E3Z-LS83
E3Z-LS88
Light-ON L side
(LIGHT
ON) BGS:
Either leave
the pink
wire (2)
open or
connect it to
the blue
wire (3).
Dark-ON D side
(DARK ON)
E3Z-LS81
E3Z-LS86
Light-ON L side
(LIGHT
ON) FGS:
Connect
the pink
wire (2) to
the brown
wire (1).
Dark-ON D side
(DARK ON)
ON
OFF
ON
OFF
ON
OFF
NEAR FAR
Operation
indicator
(orange)
(Between blue and black leads)
Output
transistor
Load
(e.g., relay)
4
1243
1
2
3
ZD
Connector Pin Arrangement
FGS
BGS
100 mA
max.
12 to 24 VDC
0
V
Blue
Brown
Black
Pink Load (relay)
Operation
indicator
(orange)
Stability
indicator
(green)
(Control output)
Photo-
electric
Sensor
Main
Circuit
ON
OFF
ON
OFF
ON
OFF
NEAR FAR
Operation
indicator
(orange)
(Between blue and black leads)
Output
transistor
Load
(e.g., relay)
ON
OFF
ON
OFF
ON
OFF
NEAR FAR
VERY FAR
Operation
indicator
(orange)
(
Between blue and black leads
)
Output
transistor
Load
(e.g., relay)
ON
OFF
ON
OFF
ON
OFF
NEAR FAR
VERY FAR
Operation
indicator
(orange)
(Between blue and black leads)
Output
transistor
Load
(e.g., relay)
2
4
1
3
1
2
3
4
Brown
White
Blue
Black
Wire color
XS3F-M421-402-A
XS3F-M421-405-A
XS3F-M422-402-A
XS3F-M422-405-A
1234
E39-ECON@M
E39-ECONW@M
1234
4
3
12
Classifi-
cation Wire
color Connector
pin No. Application
DC
Brown 1 Power supply (+V)
White 2 BGS/FGS selec-
tion
Blue 3 Power supply (0 V)
Black 4 Output
Set distance adjuster
(5-turn endless adjustment)
Operation indicator (orange)
Operation selector
Stability indicator (green)
8
E3Z-LS
Safety Precautions
Refer to Safety Precautions of the E3Z and Warranty and Limitations of Liability.
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Do not connect an AC power supply to the Sensor.
If AC power (100 VAC or more) is supplied to the
Sensor, it may explode or burn.
Be sure to abide by the following precautions for the safe operation of
the Sensor.
● Wiring
Power Supply Voltage and Output Load Power Supply
Voltage
Make sure that the power supply to the Sensor is within the rated
voltage range. If a voltage exceeding the rated voltage range is
supplied to the Sensor, it may explode or burn.
Load Short-circuiting
Do not short-circuit the load, otherwise the Sensor may be damaged.
Connection without Load
Do not connect the power supply to the Sensor with no load
connected, otherwise the internal elements may explode or burn.
● Operating Environment
Do not use the Sensor in locations with explosive or flammable gas.
Do not use the product in atmospheres or environments that exceed
product ratings.
● Designing
Power Reset Time
The Sensor is ready to operate 100 ms after the Sensor is turned ON.
If the load and Sensor are connected to independent power supplies
respectively, be sure to turn ON the Sensor before supplying power
to the load.
● Wiring
Avoiding Malfunctions
If using the Sensor with an inverter or servomotor, always ground the
FG (frame ground) and G (ground) terminals, otherwise the Sensor
may malfunction.
● Mounting
Mounting the Sensor
•If Sensors are mounted face-to-face, make sure that the optical
axes are not in opposition to each other. Otherwise, mutual
interference may result.
•Always install the Sensor carefully so that the aperture angle range
of the Sensor will not cause it to be directly exposed to intensive
light, such as sunlight, fluorescent light, or incandescent light.
•Do not strike the Photoelectric Sensor with a hammer or any other
tool during the installation of the Sensor, or the Sensor will lose its
water-resistive properties.
•Use M3 screws to mount the Sensor.
•When mounting the case, make sure that the tightening torque
applied to each screw does not exceed 0.54 N·m.
M8 Connector
•Always turn OFF the power supply to the Sensor before connecting
or disconnecting the metal connector.
•Hold the connector cover to connect or disconnect it.
If the XS3F is used, always tighten the connector cover by hand. Do
not use pliers.
If the connector is not connected securely, it may be disconnected
by vibration or the proper degree of protection of the Sensor may
not be maintained. The appropriate tightening torque is 0.3 to 0.4
N·m.
If other commercially available connectors are used, follow the
recommended connector application conditions and recommended
tightening torque specifications.
Mounting Directions
•Make sure that the sensing side of
the Sensor is parallel with the
surface of the sensing objects.
Normally, do not incline the
Sensor towards the sensing
object.
If the sensing object has a glossy
surface, however, incline the Sensor
by 5° to 10° as shown in the
illustration, provided that the Sensor
is not influenced by background
objects.
•If there is a mirror-like object below
the Sensor, the Sensor may not
operate stably. Therefore, incline
the Sensor or separate the Sensor from the mirror-like object as
shown below.
WARNING
Caution
Precautions for Safe Use
Precautions for Correct Use
Sensing side
Surface of sensing
object
Glossy object
Sensing
object
Mirror-like object
E3Z-LS
9
•Do not install the Sensor in the wrong direction. Refer to the
following illustration.
Install the Sensor as shown in the following illustration if each sensing
object greatly differs in color or material.
● Adjusting
Indicator Operatio n
Note: 1. If the stability indicator is l it, the d etectio n/n o detect ion st atus is st able
within the rated ambient operating temperature (−25 to 55°C).
2. The VERY FAR region is supported only for FGS. The incident l ight
threshold is fixed and cannot be set. The dista nce to the incident light
threshold depends on the color and gloss of the sensing object's
surface.
● Inspection and Maintenance
Cleaning
Never use paint thinners or other organic solvents to clean the surface
of the product.
Sensing
object
Moving direction Moving direction
Moving
direction
Sensing
object
Sensing
object
Moving direction Moving direction
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Stability
(green)
Operation
(orange)
Stability
(green)
Operation
(orange)
Stability
(green)
Operation
(orange)
Stability
(green)
Operation
(orange)
L/ON
D/ON
L/ON
D/ON
ON
OFF
ON
OFF
ON
OFF
ON
OFF
FGS
BGS
NEAR region
Stable NEAR
Stable FAR
Very insufficient
incident light
FAR region
Unstable NEAR Unstable FAR
VERY NEAR region
(for FGS only)
Distance threshold
(settable) Incident light level threshold
(not settable)
Not sufficient
incident light margin Slightly insufficient
incident light
10
E3Z-LS
Dimensions (Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Two, M3
Operation
indicator (orange)
Set distance adjuster Operation selector
Stability indicator (green)
Receiver
Optical axis
Emitter
Two lenses (7 dia.)
4.3
8
12.7
20
10.8 10.4
17
3118 4
425.4
2.1
13.5
4-dia., vinyl-insulated round cable with 4
conductors (Conductor cross section:
0.2 mm2 (AWG24); Insulator diameter: 1.1 mm),
Standard length: 2 m/0.5 m
e-CON Pre-wired Connector
* 4-dia. vinyl-insulated round cable with 4 conductor
s
Standard lengths: 0.3 m, 0.5 m, and 2 m
Connector: Model No. 37104-3122-000FL
Sumitomo 3M
15
5.9
15.6 4
3
2
1
Pre-wired Models
E3Z-LS61
E3Z-LS81
E3Z-LS63
E3Z-LS83
Two, M3 Connector M8
Operation
indicator (orange)
Set distance adjuster Operation selector
Stability indicator (green)
Receiver
Optical axis
Emitter
Two lenses (7 dia.)
4.3
8
12.7
20
10.8 10.4
17
31
10.4
18 4
425.4
2.1
13.5
9.75
Connector Models
E3Z-LS66
E3Z-LS86
E3Z-LS68
E3Z-LS88
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
•
Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
•
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
•
Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
2008.11
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2008 All Right Reserved.
