For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - HIGH IP3 - SMT
10
10 - 230
HMC483MS8G / 483MS8GE
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz
v01.0710
General Description
Features
Functional Diagram
+33 dBm Input IP3
Conversion Loss: 9 dB
Low LO Drive: -4 to +4 dBm
Single Positive Supply: 5V @ 50 mA
Ultra Small MSOP Package: 14.8mm2
Included in the HMC-DK003 Designer’s Kit
Electrical Speci cations, TA = +25°C, LO = 0 dBm, IF = 70 MHz*, Vdd= 5V
Typical Applications
The HMC483MS8G / HMC483MS8GE is ideal for:
• Cellular/3G
• GSM, GPRS & EDGE
• CDMA & WCDMA
• Cable Modem Termination Systems
The HMC483MS8G & HMC483MS8GE are high dy-
namic range passive MMIC mixers with integrated
LO ampli ers in plastic surface mount 8 lead Mini
Small Outline Packages (MSOP) covering 0.7 to 1.5
GHz. Excellent input IP3 performance of +33 dBm
for down conversion and +30 dBm for up conversion
is provided for 2.5G & 3G GSM/CDMA applications
at an LO drive of 0 dBm. With an input 1 dB compression
of +24 dBm, the RF port will accept a wide range of
input signal levels. Conversion loss is 9 dB typical.
The DC to 350 MHz IF frequency response will satisfy
GSM/CDMA transmit or receive frequency plans
con gured for low side LO. The HMC483MS8G(E)
are pin for pin compatible with the HMC485MS8G(E)
which are 1.7 - 2.2 GHz mixers with LO ampli ers.
Parameter Min. Typ. Max. Min. Typ. Max. Units
Frequency Range, RF & LO 0.8 - 1.1 0.7 - 1.5 GHz
Frequency Range, IF DC - 350 DC - 350 MHz
Conversion Loss 8.5 10.5 9 12 dB
Noise Figure (SSB) 8.5 10.5 9 12 dB
LO to RF Isolation 10 20 6 14 dB
LO to IF Isolation 6 10 6 13 dB
IP3 (Input) 33 33 dBm
1 dB Gain Compression (Input) 24 23 dBm
LO Input Drive Level (Typical) -4 to +4 -4 to +4 dBm
Supply Current 50 50 mA
*Unless otherwise noted, all measurements performed as a downconverter.
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - HIGH IP3 - SMT
10
10 - 231
Conversion Gain vs. Temperature Isolation
Conversion Gain vs. LO Drive Return Loss
IF Bandwidth
Upconverter Performance
Conversion Gain
*Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 70 MHz.
-20
-15
-10
-5
0
0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5
+ 25C
+ 85C
- 40C
CONVERSION GAIN (dB)
RF FREQUENCY (GHz)
-20
-15
-10
-5
0
0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5
LO = -6 dBm
LO = -4 dBm
LO = -2 dBm
LO = 0 dBm
LO = +2 dBm
LO = +4 dBm
CONVERSION GAIN (dB)
RF FREQUENCY (GHz)
-20
-15
-10
-5
0
0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5
LO
RF
RETURN LOSS (dB)
FREQUENCY (GHz)
-20
-15
-10
-5
0
0 80 160 240 320 400
CONVERSION GAIN
RETURN LOSS
IF FREQUENCY (MHz)
RESPONSE (dB)
-20
-15
-10
-5
0
0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5
LO = -6 dBm
LO = -4 dBm
LO = -2 dBm
LO = 0 dBm
LO = +2 dBm
LO = +4 dBm
CONVERSION GAIN (dB)
RF FREQUENCY (GHz)
-40
-30
-20
-10
0
0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5
RF TO IF
LO TO RF
LO TO IF
ISOLATION (dB)
FREQUENCY (GHz)
HMC483MS8G / 483MS8GE
v01.0710
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - HIGH IP3 - SMT
10
10 - 232
Upconverter IP3 vs. LO DriveInput P1dB vs. Temperature
Input IP2 vs. Temperature
Input IP3 vs. Temperature
Input IP2 vs. LO Drive
Input IP3 vs. LO Drive
10
15
20
25
30
0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5
+ 25C
+ 85C
- 40C
INPUT P1dB (dBm)
FREQUENCY (GHz)
0
10
20
30
40
0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5
LO =-6dBm
LO =-4dBm
LO =-2dBm
LO = 0dBm
LO =+2dBm
LO =+4dBm
INPUT IP3 (dBm)
RF FREQUENCY
(
GHz
)
20
25
30
35
40
0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5
LO =-6dBm
LO =-4dBm
LO =-2dBm
LO = 0dBm
LO =+2dBm
LO =+4dBm
INPUT IP2 (dBm)
FREQUENCY (GHz)
20
25
30
35
40
0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5
+ 25C
+ 85C
- 40C
INPUT IP2 (dBm)
FREQUENCY (GHz)
20
25
30
35
40
0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5
LO =-6dBm
LO =-4dBm
LO =-2dBm
LO = 0dBm
LO =+2dBm
LO =+4dBm
INPUT IP3 (dBm)
FREQUENCY (GHz)
20
25
30
35
40
0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5
+ 25C
+ 85C
- 40C
INPUT IP3 (dBm)
FREQUENCY (GHz)
HMC483MS8G / 483MS8GE
v01.0710
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - HIGH IP3 - SMT
10
10 - 233
nLO
mRF 0 1 2 3 4
0xx-924316
140301528
26671506161
383951038995
4 106 105 103 108 108
RF Freq = 0.87 GHz @ -10 dBm
LO Freq = 0.8 GHz @ 0 dBm
All values in dBc Relative to the IF power level.
nLO Spur at RF Port
LO Freq GHz 1 2 3 4
0.7 21 23 24 25
0.8 15 23 18 43
0.9 12 26 23 39
19223332
1.1 6 22 42 27
1.2 3 21 25 26
LO power = 0 dBm
All values in dBc below input LO level measured at RF port.
MxN Spurious Outputs Harmonics of LO
Absolute Maximum Ratings
RF/IF Input +27 dBm
LO Drive +10 dBm
Bias Supply (Vdd) +7 Vdc
Channel Temperature 150 °C
Continuous Pdiss (T = 85°C)
(Derate 8.95 mW/°C above 85°C) 0.58 W
Thermal Resistance (RTH)
(Channel to ground paddle) 111.7 °C/ W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
IF DC Current ±40 mA
ESD Sensitivity (HBM) Class 1B
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
HMC483MS8G / 483MS8GE
v01.0710
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - HIGH IP3 - SMT
10
10 - 234
Pin Number Function Description Interface Schematic
1LO This pin is AC coupled
and matched to 50 Ohms.
2N/C
Not connected. This pin may be connected to RF/DC
ground without affecting performance.
3, 6, 7 GND This pin and the ground paddle must be
connected to RF ground.
4Vdd Power supply for LO ampli er.
An external RF bypass capacitor is required.
5IF
This pin is DC coupled. For applications not requiring
operation to DC this port should be DC blocked externally
using a series capacitor. Choose value of capacitor to pass
IF frequency desired. For operation to DC, this pin must
not sink/source more than 40 mA of current or failure may
result.
8RF This pin is DC coupled
and matched to 50 Ohms.
Pin Descriptions
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC483MS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H483
XXXX
HMC483MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H483
XXXX
[1] Max peak re ow temperature of 235 °C
[2] Max peak re ow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
HMC483MS8G / 483MS8GE
v01.0710
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - HIGH IP3 - SMT
10
10 - 235
Evaluation PCB
List of Materials for Evaluation PCB 105188 [1]
Item Description
J1 - J3 PCB Mount SMA RF Connector
J4 - J5 DC Pin
C1 10,000 pF Chip Capacitor, 0603 Pkg.
U1 HMC483MS8G / HMC483MS8GE Mixer
PCB [2] 104813 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hit-
tite upon request.
HMC483MS8G / 483MS8GE
v01.0710
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
