MKP 1837 Vishay Roederstein Metallized Polypropylene Film Capacitor Related Document: IEC 60384-16 FEATURES Dimensions in millimeters Product is completely lead (Pb)-free Product is RoHS-compliant W Max. L Max. Marking CAPACITANCE TOLERANCES e3 10% (K), 5% (J), 2.5% (H), 1% (F) H Max. 0.6 RATED VOLTAGES (UR) 160 VDC RoHS COMPLIANT PERMISSIBLE AC VOLTAGES (RMS) UP TO 60HZ 6.0 - 1 100 VAC 0.4 5.0 0.4 TEST VOLTAGE (ELECTRODE/ELECTRODE) O 0.5 1.6 x UR for 2 s MAIN APPLICATIONS Oscillator, timing and LC/RC filter circuits, high frequency coupling/decoupling, sample and hold circuits. MARKING Manufacturer's logo/type/C-value/rated voltage/tolerance/ date of manufacture INSULATION RESISTANCE Measured at 100 VDC after one minute 100,000 M minimum value TEMPERATURE COEFFICIENT - 250C x 10-6/C (typical value) MAXIMUM PULSE RISE TIME DIELECTRIC dv/dt = 390 V/s If the maximum pulse voltage is less than the rated voltage, higher dv/dt values can be permitted. Polypropylene film ELECTRODES Vacuum deposited aluminum DERATING FOR DC AND AC.CATEGORY VOLTAGE UC COATING Flame retardant plastic case (UL-class 94 V-0), blue, epoxy resin sealed At + 85C: UC = 1.0 UR At + 100C: UC = 0.7 UR SELF INDUCTANCE ~ 6 nH measured with 2mm long leads CONSTRUCTION Extended metallized film (refer to general information) PULL TEST ON LEADS 30 N in direction of leads according to IEC 60068-2-21 LEADS Tinned wire DIELECTRIC ABSORPTION 0.05% (typical value) acc. to IEC 60384-1 IEC TEST CLASSIFICATION 55/100/56, according to IEC 60068 RELIABILITY - 55C to + 100C Operational life > 300,000 h Failure rate < 5 FIT (40C and 0.5 x UR) CAPACITANCE RANGE For further details, please refer to the general information available at www.vishay.com/doc?26033. OPERATING TEMPERATURE RANGE 0.01F to 0.1F CAPACITANCE DRIFT Up to + 40C, < 0.5% for a period of two years DISSIPATION FACTOR TAN C 0.1F 0.4 x 10-3 0.6 x 10-3 4 x 10-3 MEASURED AT 1kHz 10kHz 100kHz Maximum values Document Number: 26017 Revision: 23-Jun-05 For technical questions contact; dc-film@vishay.com www.vishay.com 1 MKP 1837 Vishay Roederstein CAPACITANCE Metallized Polypropylene Film Capacitor Related Document: IEC 60384-16 CAPACITANCE CODE VOLTAGE CODE 16 160 VDC/100 VAC W H L 0.01F - 310 5.5 7.0 7.5 0.015F - 315 5.5 7.0 7.5 0.022F - 322 5.5 7.0 7.5 0.033F - 333 7.5 9.0 7.5 0.047F - 347 7.5 9.0 7.5 0.068F - 368 7.5 9.0 7.5 0.1F - 410 9.0 11.0 7.5 Further C-values upon request RECOMMENDED PACKAGING HEIGHT (H) (mm) REEL DIAMETER (mm) ORDERING CODE EXAMPLES PCM 5 D AMMO 16.5 S* MKP 1837-322-162-D X G AMMO 18.5 S* MKP 1837-322-162-G X F REEL 16.5 350 MKP 1837-322-162-F X W REEL 18.5 350 MKP 1837-322-162-W X -- BULK -- -- MKP 1837-322-162 X 10 2 0.0 1 0.0 f Z [] TYPE OF PACKAGING VRMS LETTER CODE Capacitance in F 10 1 22 0.0 10 0 47 10 1 0.1 160 VDC 10 -2 10 3 104 10 5 10 6 107 f [Hz] Permissible AC Voltage versus Frequency www.vishay.com 2 10 -3 0.01 0.05 0.1 0.5 1.0 Impedance versus Frequency Z = f(f) (Lead length 2.0mm) For technical questions contact; dc-film@vishay.com 5.0 10 0.01F 0.022F 0.1F 10 -2 10 -1 0.047F 10 -1 10 0 50 100 f [MHz] Document Number: 26017 Revision: 23-Jun-05 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000