Infrared Receiver Control
Receiver Module IRM-36xxC series
Everlight Electronics Co., Ltd.
1 http://www.everlight.com
Document No: DMO-0000211 Rev. 3 November 1 ,2011
Features
High protection ability against EMI
Circular lens for improved reception characteristics
Min burst length: 400us
Min gap length: 450us
Low operating voltage (Vcc = 2.5V)
High immunity against ambient light
Long reception range
High sensitivity
Pb free and RoHS compliant
Description
The IRM-36xxC devices are miniature type infrared
receivers which have been developed and designed
by using the latest IC technology, with high immunity
against optical interferences and power supply noise.
The photo diode and preamplifier are assembled onto
a lead frame and molded into an epoxy package
which operates as an IR filter.
The demodulated output signal can directly be
decoded by a microprocessor.
Applications
• AV equipment such as TV, VCR, DVD, CD, MD, etc.
• Toy applications
• CATV set top boxes
• Multi-media Equipment
Application Circuit Block Diagram
The RC Filter must be connected as close as possible to
Vcc and GND pins.
1
2
3
Pin Configuration
1. OUT
2. GND
3. V
CC
Infrared Receiver Control
Receiver Module IRM-36xxC series
Everlight Electronics Co., Ltd.
2 http://www.everlight.com
Document No: DMO-0000211 Rev. 3 November 1 ,2011
Parts Table
Model No. Carrier Frequency
IRM-3638C 38 kHz
I
RM-3640C 40 kHz
Package Dimensions
(Dimensions in mm)
Infrared Receiver Control
Receiver Module IRM-36xxC series
Everlight Electronics Co., Ltd.
3 http://www.everlight.com
Document No: DMO-0000211 Rev. 3 November 1 ,2011
Absolute Maximum Ratings (T
a
=25°C)
Parameter Symbol Rating Unit
Supply Voltage Vcc 6 V
Operating Temperature Topr -25 ~ +85
Storage Temperature Tstg -40 ~ +85
Soldering Temperature
*1
Tsol 260
*1
4mm from mold body for less than 10 seconds
Electro-Optical Characteristics (Ta=25
, Vcc=3V)
Parameter Symbol
MIN. TYP. MAX. Unit
Condition
Current consumption Icc --- 1.0 1.3 mA No input signal
Supply voltage V
CC
2.5 - 5.5 V
Peak wavelength λ
p
--- 940 --- nm
Reception range
L
0
14 --- --- m
See chapter
‚Test method’
L
45
6 --- ---
Half angle(horizontal) φ
h
--- ±35 --- deg
Half angle(vertical) φ
v
--- ±35 --- deg
High level pulse width T
H
450 --- 750 µs Test signal
according to
figure 1
Low level pulse width T
L
450 --- 750 µs
High level output voltage V
OH
Vcc-0.4 --- --- V Open circuit
Low level output voltage V
OL
--- 0.2 0.5 V I
SINK
2mA
Internal pull up resistor R
PU
40 50 60 k
Infrared Receiver Control
Receiver Module IRM-36xxC series
Everlight Electronics Co., Ltd.
4 http://www.everlight.com
Document No: DMO-0000211 Rev. 3 November 1 ,2011
Test method
The specified electro-optical characteristics are valid under the following conditions.
1. Measurement environment
A place without extreme light reflections.
2. External light
The environment contains an ordinary, white fluorescent lamp without high frequency modulation. The
color temperature is 2856K and the illumination at the IR receiver is less than 10 Lux (Ev 10Lux)
.
3. Standard transmitter
The test transmitter is calibrated by using the circuit shown in figure 2. The radiation intensity of the
transmitter is adjusted until Vo=400mVp-p. Both, the test transmitter and the photo diode, have a peak
wavelength of 940nm. The photo diode for calibration is PD438B (λp=940nm, Vr=5V).
4. The measurement system is shown in Fig.-3
Fig.-1 Transmitter Wave Form
D.U.T output Pulse
Fig.-2 standard transmitter calibration Fig.-3 Measuring System
Infrared Receiver Control
Receiver Module IRM-36xxC series
Everlight Electronics Co., Ltd.
5 http://www.everlight.com
Document No: DMO-0000211 Rev. 3 November 1 ,2011
Typical Electro-Optical Characteristic Curves
Infrared Receiver Control
Receiver Module IRM-36xxC series
Everlight Electronics Co., Ltd.
6 http://www.everlight.com
Document No: DMO-0000211 Rev. 3 November 1 ,2011
Code information
Protocol Suitable Protocol Suitable
JVC Yes RCA No
Matsushita No Sharp No
Mitsubishi No Sony 12 Bit Yes
NEC Yes Sony 15 Bit Yes
RC5 Yes Sony 20Bit No
RC6 Yes Toshiba Yes
RCMM No Zenith Yes
RCS-80 No Continuous Code No
Packing Quantity
1500 pcs / Box
10 Boxes / Carton
Infrared Receiver Control
Receiver Module IRM-36xxC series
Everlight Electronics Co., Ltd.
7 http://www.everlight.com
Document No: DMO-0000211 Rev. 3 November 1 ,2011
DISCLAIMER
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material
change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions for use
outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting
from use of the product which does not comply with the absolute maximum ratings and the instructions
included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in
any form is prohibited without the specific consent of EVERLIGHT.