VDRT-960-24 - CUI, Inc. - Datasheet.Directory

V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258

VDRT-960-24 Three Phase Industrial DIN Rail Power Supply

DC output voltage 24V

Output rated current 40A

Output current range 0~40A

Rated output power 960W

Ripple & noise 80mVp-p

Voltage adj. range 24~28V

Voltage tolerance ±1.0%

Line regulation ±0.5%

Load regulation ±0.5%

Setup, rise, hold time 200ms, 60ms, 10ms/400VAC 200ms, 60ms, 24ms/500VAC at full load

Input voltage range Three phrase 340 ~ 550VAC

Frequency range 47 ~ 63Hz

Efficiency 91%

AC current 2.4A/400VAC 1.9A/500VAC

Inrush current Cold start 50A

Leakage current <3.5mA / 530VAC

Overload protection 105 ~ 125% rated output power type : Constant current limiting, unit will shut down o/p

voltage after 3 sec., re-power on to recover

Over voltage protection 30~36V type : Shut down o/p voltage, re-power on to recover

Over temp. protection 110°C±5°C(TSW1) Detect on heatsink of power transistor, 85°C±5°C(TSW2) Detect on

heatsink of power diode

type : Shut down o/p voltage, recovers automatically after temperature goes down

Working temperature -20 ~ +60°C (Refer to output load derating curve)

Working humidity 20 ~ 90% RH non-condensing

Storage temp., humidity -40 ~ +85°C , 10 ~ 95% RH

Temperature coefficient ±0.03%/°C (0 ~ 50°C)

Vibration Component: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting:

compliance to ICE60068-2-6

Safety standards UL508, ULEN60950-1, TUV EN60950-1 Approved

Withstand voltage I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC for 1 min.

Isolation resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC min.

EMI conduction & radiation Compliance to EN55022 (CISPR22) Class B

Harmonic current Compliance to EN61000-3-2,-3

EMS immunity Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61000-6-2 (EN50082-2) Heavy

industry level, criteria A

MTBF 122.5Khrs min. MIL-HDBK-217F (25°C)

Dimensions 10.87x4.93x3.94 inches (276*125.2*100mm)

Weight 7.28lbs (3.3Kg); 4pcs/ 31.3lbs (14.2Kg)/1.14CUFT

Notes: 1. All parameters are specified at 230VAC input, rated load, 25°C 70% RH ambient

2. Tolerance includes set up tolerance, line regulation, load regulation

3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor

*V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise customers to verify the most

up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for customer ’s applications using V-Infinity products other than

repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s published specifications. Nothing will be covered outside of standard product warranty.

Features

·High efficiency 89% and low dissipation

·Protections:Short circuit/Over load/Over voltage/Over

temperature

·Cooling by free air convection

·Built-in constant current limiting circuit

·Can be installed on DIN rail TS-35/7.5 or 15

·UL 508(industrial control equipment)approved

·EN61000-6-2(EN50082-2) industrial immunity level

·100% full load burn-in test

·3 year warranty