Military Fuseholders FHL10U
Panel Mount-Lamp Indicating HGA-C
Form No. FHL10U
Page 1 of 1
BIF Doc #2134
Bussmann®
12-17-98
SB98107 Rev. A
CATALOG SYMBOL: FHL10U
LAMP INDICATING
MEETS MILITARY SPECIFICATION - MIL-F-19207/1
NO AGENCY LISTINGS
FOR MILITARY 1/4” x 1-1/4” FUSES:
F02 AND F03 SERIE
COMMERCIAL EQUIVALENT: HGA-C
Drilled Mounting Hole
Dimensional Tolerance + 0.005" (0.13 mm)
1.81"
(46.0mm)
1.19"
(30.2mm) .81"
(20.6mm)
3.88"
(98.4mm)
.433"
(11.0mm)
.800"
(20.3mm)
.516"
(13.1mm) .469"
(11.9mm)
.938"
(23.8mm)
.109" RAD.
(2.8mm)
.105" RAD.
(2.67mm)
.156" DIA. + .002"
(4.0mm + .05mm)
.437" RAD.
(11.0mm)
.974"
(24.7mm)
.400"
(10.2mm)
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to
clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any
products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been select-
ed, it should be tested by the user in all possible applications.
Dimensional Data
Specifications
Knob Clear transparent bayonet type (fuses mount in fuse
clips of a fuse carrier)
Terminals Threaded stud type; tooth lockwashers and hex nuts.
Enclosure Unsealed—(FHL10U) IAW MIL-STD-108.
Panel Thickness 0.125 Max.
Rating 30 amperes. 90—250 volts.
Resistor 120,000 ohms.
Body Material Grey; meets MIL-M-14; fire retardent IAW MIL-STD-454.
Fuse Style MIL-F-15160 F02, F03 and MIL-F-23419/9 FM09.
Qualified and tested per MIL-F-19207. Group A, B and C.
Mechanical MIL-STD-202. Method I.
Shock
Terminal Strength 20 lbs.
Torque 15 lbs.-inch.
