PolySwitch(R) PTC Devices PRODUCT: TRF600-160-0.130 DOCUMENT: SCD 26266 LETTER: E REV DATE: FEBRUARY 2, 2010 PAGE NO.: 1 OF 1 Overcurrent Protection Device 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com Raychem Circuit Protection Products Specification Status: Released Maximum Operating Voltage: 250VDC Fault Ratings at 20C: 250VRMS, 3A, 10 applications 600VRMS, 60A, 1 application Additional Info at 20C: * Resistance matched: N/A * Lightning withstand: GR-10891.0 kV, 10/1000s, with 13 ohm load * Helps equipment comply to Telcordia GR-1089 Lead Material: 22 AWG Sn-Plated Copper (0.64 mm [0.025"] nominal diameter) External Coating Material: Cured, flame retardant epoxy polymer, meeting UL94 V-0 requirements Marking: TABLE I. DIMENSIONS: A B MIN MAX MIN MAX mm: -16.0 -12.6 in*: -(0.63) -(0.50) * Rounded off approximation C MIN --- D MAX 6.0 (0.24) MIN 3.3 (0.13) MAX --- E NOM 5.0 (0.20) F MAX 10.0 (0.39) TABLE II. PERFORMANCE RATINGS @ 20C (as measured in Loranger P/N 02901-032-6218A): HOLD TRIP CURRENT CURRENT (A) (A) RESISTANCE () R MIN R MAX R1 MAX* 0.160 0.320 4.0 10.0 18.0 *Post Trip Resistance measured after one hour. TIME TO TRIP(Sec) @ 1A TYP 7.5 MAX 18.0 OPERATING TEMPERATURE (C) MIN MAX -40 85 TRIPPED POWER DISSIPATION (W) @ 250VDC TYP MAX 1.7 2.2 TABLE III. APPLICABLE PART DESCRIPTIONS: PART DESCRIPTION TRF600-160-0.130 Agency Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: PACKAGING TYPE Bulk UL (File #E74889), CSA (File #1026908), TUV Raychem PS300, Telcordia GR-1089 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information ROHS Compliant NOTE N/A ELV Compliant (c) 2006, 2010 Tyco Electronics Corporation. All rights reserved. Pb-Free