PAGE . 1May 5,2010-REV.02
ER1000FCT~ER1006FCT
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O.
Flame Retarda nt Epoxy Molding Compound.
• Exceeds environmental standards of MIL-S-19500/228
• Low power loss, high efficiency.
• Low forward voltage, high current capability
• High surge capacity.
• Super fast recovery times, high voltage.
• Lead free in comply with EU RoHS 2002/95/EC directives
SUPERFAST RECOVERY RECTIFIERS
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC.
2. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A.
3. Both Bonding and Chip structure are available.
.027(.67)
.022(.57)
.177(4.5)
.137(3.5)
VOLTAGE 50 to 600 V olts 10 Amperes
CURRENT
MECHANICAL DATA
• Case: ITO-220AB Molded plastic
• Terminals: Lead solderable per MIL-STD-750, Method 2026
• Polarity: As marked.
• Standard packaging: Any
• Weight: 0.0655 ounces, 1.859grams.
MAXIMUM RATING AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
PARAMETER SYMBOL
ER1000FCT ER1001FCT ER1001AFCT ER1002FCT ER1003FCT ER1004FCT ER1006FCT
UNITS
Maximum Recurrent Peak Reverse Voltage V
RRM
50 100 150 200 300 400 600 V
Maximum RMS Voltage V
RMS
35 70 105 140 210 280 420 V
Maximum DC Blocking Voltage V
DC
50 100 150 200 300 400 600 V
Maximum Average Forward Current at Tc =100
O
CI
F(AV)
10.0 A
Peak Forward Surge Current, 8.3ms single half sine-wave
superimposed on rated load(JEDEC method) I
FSM
150 A
Maximum Forward Voltage at 5A, per element V
F
0.95 1.30 1.7 V
Maximum DC Reverse Current at T
J
=25
O
C
Rated DC Blocking VoltageT
J
=100
O
CI
R
1.0
500 μA
Maxi mum Reverse Re covery Time (Note 2) t
rr
35 50 ns
Typical Junction capacitance (Note 1) C
J
62 pF
Typical Thermal Resistance R
θJC
3.0
O
C /
W
Operating Junction and Storage Temperature Range T
J
,T
STG
-55 to +150
O
C