DJ (ADJ)
SPECIFICATIONS
16A, COMPACT AND
HIGH INSULATION
POWER LATCHING RELAY
DJ RELAYS (ADJ)
pending
VDE
FEATURES
1. Variety of contact arrangements
Wide lineup of 1 Form C, 1 Form A,
1 Form B, 2 Form C, 2 Form A, 2 Form B,
1 Form A 1 Form B.
2. Latching operation
Latching via a polarized magnetic circuit
structure allows remote operation and
lower energy consumption
3. Compact with high capacity
16A (1-pole type) contact rating in a
compact 29×13×16.5 mm (L×W×H) size.
4. Low power consumption
1 coil latching: 150mW
2 coil latching, single side stable: 250mW
5. High insulation
Both clearance and creepage distance
between coil and contact are at 8 mm
min.
5. With operation verification function
A test button (manual lever) type to
facilitate circuit checks is also available
(1 Form C, 1 Form A, 1 Form B types
only).
TYPICAL APPLICATIONS
•FA equipment (brake circuits of
industrial machine and robots, etc.)
Electric power devices (remote
surveillance devices, etc.)
Household appliance networks (Motor
control and lighting control, etc.)
Time switches
Without test button With test button
RoHS Directive compatibility information
http://www.nais-e.com/
Contact
Coil
#1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load.
Characteristics
Remarks
*1With breathing holes open
*2Measurement at same location as “Initial breakdown voltage” section.
*3Detection current: 10mA
*4Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981
*5Excluding contact bounce time.
*6By resistive method, max. switching current
*7Half-wave pulse of sine wave: 11 ms; detection time: 10 µs
*8Half-wave pulse of sine wave: 6 ms
*9Detection time: 10 µs
*10 Refer to 5. Conditions for operation, transport and storage mentioned in NOTES
Arrangement
1 Form C, 1 Form A, 1 Form B,
1 Form A 1 Form B, 2 Form C,
2 Form A, 2 Form B
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A) 100 m
Contact material
AgSnO2 type
(1 Form C, 1 Form A, 1 Form B)
Au-flashed AgSnO2 type
(1 Form A 1 Form B, 2 Form C,
2 Form A, 2 Form B)
Rating
(resistive
load)
Nominal switching
capacity
16 A 250V AC
(1 Form C, 1 Form A, 1 Form B)
10 A 250V AC
(2 Form C, 2 Form A, 2 Form B,
1 Form A 1 Form B)
Max. switching power 4,000 V A
Max. switching voltage 250V AC
Max. switching current 16 A
Min. switching capacity
(Reference value)#1
100 mA, 5 V DC
Expected
life (min.
operations)
Mechanical
(at 180 cpm) 5×106
Electrical
(Resistive load)*1
(at 20 cpm)
1 Form C, 1 Form A, 1 Form B:
105 (at 16A 250V AC)
2 Form C, 2 Form A, 2 Form B,
1 Form A 1 Form B: :
105 (at 10A 250V AC)
Nominal operating
power
1 coil latching 150mW
Single side stable, 2 coil latching 250mW
Initial insulation resistance*2Min. 1,000 M (at 500 V DC)
Initial
breakdown
voltage*3
Between open
contacts 1,000 Vrms for 1 min.
Between contacts and
coil 4,000 Vrms for 1 min.
Surge voltage between contact and
coil*4Min. 10,000 V (initial)
Operate time [Set time]*5
(at nominal voltage) Approx. 10ms
Release time [Reset time]*5
(at nominal voltage) Approx. 10ms
Temperature rise (at 70°C)*6Max. 55°C
Shock
resistance
Functional*7Min. 200 m/s2{20 G}
Destructive*8Min. 1,000 m/s2{100 G}
Vibration
resistance
Functional*910 to 55Hz
at double amplitude of 2.0mm
Destructive 10 to 55Hz
at double amplitude of 3.0mm
Conditions for
operation, transport
and storage*10
(Not freezing and
condensing at low
temperature)
Ambient
temperature
–40°C to +70°C
–40°F to +158°F
Humidity 5 to 85% R.H.
Unit weight Approx. 14 g .49 oz
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
DJ (ADJ)
ORDERING INFORMATION
TYPES
1. Without test button
1) Flux-resistant type
Contact arrangement Coil voltage, V DC Single side stable type 1 coil latching type 2 coil latching type
Part No. Part No. Part No.
1 Form C
5 ADJ15005 ADJ11005 ADJ13005
6 ADJ15006 ADJ11006 ADJ13006
12 ADJ15012 ADJ11012 ADJ13012
24 ADJ15024 ADJ11024 ADJ13024
48 ADJ15048 ADJ11048 ADJ13048
1 Form A
5 ADJ25005 ADJ21005 ADJ23005
6 ADJ25006 ADJ21006 ADJ23006
12 ADJ25012 ADJ21012 ADJ23012
24 ADJ25024 ADJ21024 ADJ23024
48 ADJ25048 ADJ21048 ADJ23048
1 Form B
5 ADJ35005
Please use 1 Form A. Please use 1 Form A.
6 ADJ35006
12 ADJ35012
24 ADJ35024
48 ADJ35048
1 Form A 1 Form B
5 ADJ45005 ADJ41005 ADJ43005
6 ADJ45006 ADJ41006 ADJ43006
12 ADJ45012 ADJ41012 ADJ43012
24 ADJ45024 ADJ41024 ADJ43024
48 ADJ45048 ADJ41048 ADJ43048
2 Form C
5 ADJ55005 ADJ51005 ADJ53005
6 ADJ55006 ADJ51006 ADJ53006
12 ADJ55012 ADJ51012 ADJ53012
24 ADJ55024 ADJ51024 ADJ53024
48 ADJ55048 ADJ51048 ADJ53048
2 Form A
5 ADJ65005 ADJ61005 ADJ63005
6 ADJ65006 ADJ61006 ADJ63006
12 ADJ65012 ADJ61012 ADJ63012
24 ADJ65024 ADJ61024 ADJ63024
48 ADJ65048 ADJ61048 ADJ63048
2 Form B
5 ADJ75005
Please use 2 Form A. Please use 2 Form A.
6 ADJ75006
12 ADJ75012
24 ADJ75024
48 ADJ75048
Ex. ADJ
Contact arrangement
1: 1 Form C
2: 1 Form A
3: 1 Form B
4: 1 Form A 1 Form B
5: 2 Form C
6: 2 Form A
7: 2 Form B
1: 1 coil latching, Flux-resistant type
2: 1 coil latching, Sealed type
3: 2 coil latching, Flux-resistant type
4: 2 coil latching, Sealed type
5: Single side stable, Flux-resistant type
6: Single side stable, Sealed type
0: Without test button
1: With test button
05: 5 V
06: 6 V
12: 12 V
24: 24 V
48: 48 V
Operating function and protective construction Auxiliary function Coil voltage (DC)
Note: Standard packing: Carton: 100 pcs, Case: 500 pcs
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
DJ (ADJ)
2) Sealed type
2. With test button
Flux-resistant type
Contact arrangement Coil voltage, V DC Single side stable type 1 coil latching type 2 coil latching type
Part No. Part No. Part No.
1 Form C
5 ADJ16005 ADJ12005 ADJ14005
6 ADJ16006 ADJ12006 ADJ14006
12 ADJ16012 ADJ12012 ADJ14012
24 ADJ16024 ADJ12024 ADJ14024
48 ADJ16048 ADJ12048 ADJ14048
1 Form A
5 ADJ26005 ADJ22005 ADJ24005
6 ADJ26006 ADJ22006 ADJ24006
12 ADJ26012 ADJ22012 ADJ24012
24 ADJ26024 ADJ22024 ADJ24024
48 ADJ26048 ADJ22048 ADJ24048
1 Form B
5 ADJ36005
Please use 1 Form A. Please use 1 Form A.
6 ADJ36006
12 ADJ36012
24 ADJ36024
48 ADJ36048
1 Form A 1 Form B
5 ADJ46005 ADJ42005 ADJ44005
6 ADJ46006 ADJ42006 ADJ44006
12 ADJ46012 ADJ42012 ADJ44012
24 ADJ46024 ADJ42024 ADJ44024
48 ADJ46048 ADJ42048 ADJ44048
2 Form C
5 ADJ56005 ADJ52005 ADJ54005
6 ADJ56006 ADJ52006 ADJ54006
12 ADJ56012 ADJ52012 ADJ54012
24 ADJ56024 ADJ52024 ADJ54024
48 ADJ56048 ADJ52048 ADJ54048
2 Form A
5 ADJ66005 ADJ62005 ADJ64005
6 ADJ66006 ADJ62006 ADJ64006
12 ADJ66012 ADJ62012 ADJ64012
24 ADJ66024 ADJ62024 ADJ64024
48 ADJ66048 ADJ62048 ADJ64048
2 Form B
5 ADJ76005
Please use 2 Form A. Please use 2 Form A.
6 ADJ76006
12 ADJ76012
24 ADJ76024
48 ADJ76048
Contact arrangement Coil voltage, V DC Single side stable type 1 coil latching type 2 coil latching type
Part No. Part No. Part No.
1 Form C
5 ADJ15105 ADJ11105 ADJ13105
6 ADJ15106 ADJ11106 ADJ13106
12 ADJ15112 ADJ11112 ADJ13112
24 ADJ15124 ADJ11124 ADJ13124
48 ADJ15148 ADJ11148 ADJ13148
1 Form A
5 ADJ25105 ADJ21105 ADJ23105
6 ADJ25106 ADJ21106 ADJ23106
12 ADJ25112 ADJ21112 ADJ23112
24 ADJ25124 ADJ21124 ADJ23124
48 ADJ25148 ADJ21148 ADJ23148
1 Form B
5 ADJ35105
Please use 1 Form A. Please use 1 Form A.
6 ADJ35106
12 ADJ35112
24 ADJ35124
48 ADJ35148
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
DJ (ADJ)
COIL DATA (at 20°C 68°F)
• Single side stable type
• 1 coil latching type
• 2 coil latching type
DIMENSIONS mm inch
Nominal voltage,
V DC
Set voltage,
max. V DC
(initial)
Reset voltage,
max. V DC
(initial)
Coil resistance,
(±10%)
Nominal operating
power,
mW
Max. allowable voltage,
V DC
5 3.75 0.5 100
250
6.5
6 4.5 0.6 144 7.8
12 9 1.2 576 15.6
24 18 2.4 2,304 31.2
48 36 4.8 9,216 62.4
Nominal voltage,
V DC
Set voltage,
max. V DC
(initial)
Reset voltage,
max. V DC
(initial)
Coil resistance,
(±10%)
Nominal operating
power,
mW
Max. allowable voltage,
V DC
5 3.5 3.5 167
150
6.5
6 4.2 4.2 240 7.8
12 8.4 8.4 960 15.6
24 16.8 16.8 3,840 31.2
48 33.6 33.6 15,360 62.4
Nominal voltage,
V DC
Set voltage,
max. V DC
(initial)
Reset voltage,
max. V DC
(initial)
Coil resistance,
(±10%)
Nominal operating
power,
mW
Max. allowable voltage,
V DC
5 3.5 3.5 100
250
6.5
6 4.2 4.2 144 7.8
12 8.4 8.4 576 15.6
24 16.8 16.8 2,304 31.2
48 33.6 33.6 9,216 62.4
1. 1 Form C, without test button
General tolerance: ±0.3 ±.012
Schematic (Bottom view)
1 coil latching typeSingle side stable type 2 coil latching type
10.16
.400
13.0
.512
10.16
.400
13.0
.512
10.16
.400
13.0
.512
3.50
.138
3.50
.138
3.5
.138
16.0
.630
15.24
.600
29.0
1.142
1.80
.071 5.08
.200 5.08
.200
6
42
1
+8
9
8
+1
6
42
1 coil latching typeSingle side stable type 2 coil latching type
8
+12
6
4
PC board pattern (Bottom view)
Tolerance: ±0.1 ±.004
2 coil latching type only
15.24
.600
5.08
.200
5.08
.200
5.08
.200
5.08
.200
1.50 dia.
0.59 dia.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
DJ (ADJ)
2. 1 Form C, with test button
General tolerance: ±0.3 ±.012
Schematic (Bottom view)
1 coil latching typeSingle side stable type 2 coil latching type
10.16
.400
9.0
.354
9.0
.354
13.0
.512
10.16
.400
13.0
.512
9.0
.354
10.16
.400
13.0
.512
3.50
.138
3.50
.138
3.5
.138
16.0
.630 18.2
.717
6.3
.248
15.24
.600
29.0
1.142
1.80
.071 5.08
.200 5.08
.200
6
42
1
+8
9
8
+1
6
42
1 coil latching typeSingle side stable type 2 coil latching type
8
+12
6
4
mm inch
PC board pattern (Bottom view)
Tolerance: ±0.1 ±.004
2 coil latching type only
15.24
.600
5.08
.200
5.08
.200
5.08
.200
5.08
.200
1.50 dia.
0.59 dia.
3. 1 Form A, without test button
General tolerance: ±0.3 ±.012
Schematic (Bottom view)
1 coil latching typeSingle side stable type 2 coil latching type
1 coil latching type
2 coil latching type
Single side stable type only
10.16
.400
13.0
.512
10.16
.400
13.0
.512
10.16
.400
13.0
.512
3.50
.138
3.50
.138
3.5
.138
16.0
.630
15.24
.600
29.0
1.142
1.80
.071 5.08
.200 5.08
.200
42
1
+8
9
8
+142
1 coil latching typeSingle side stable type 2 coil latching type
+1
86
4
PC board pattern (Bottom view)
Tolerance: ±0.1 ±.004
1 coil latching type
2 coil latching typeSingle side stable type
1.50 dia.
0.59 dia.
1.50 dia.
0.59 dia.
2 coil latching type only
15.24
.600
20.32
.800
10.16
.400
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
4. 1 Form A, with test button
General tolerance: ±0.3 ±.012
Schematic (Bottom view)
1 coil latching typeSingle side stable type 2 coil latching type
10.16
.400
9.0
.354
9.0
.354
13.0
.512
10.16
.400
13.0
.512
9.0
.354
10.16
.400
13.0
.512
3.50
.138
3.50
.138
3.5
.138
16.0
.630 18.2
.717
6.3
.248
15.24
.600
29.0
1.142
1.80
.071 5.08
.200 5.08
.200
Single side stable type only
1 coil latching type
2 coil latching type
42
1
+8
9
8
+142
1 coil latching typeSingle side stable type 2 coil latching type
+1
86
4
PC board pattern (Bottom view)
Tolerance: ±0.1 ±.004
1 coil latching type
2 coil latching typeSingle side stable type
1.50 dia.
0.59 dia.
1.50 dia.
0.59 dia.
2 coil latching type only
15.24
.600
20.32
.800
10.16
.400
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
DJ (ADJ)
5. 1 Form B, without test button
General tolerance: ±0.3 ±.012
Schematic (Bottom view)
Single side stable type
10.16
.400
13.0
.512
3.5
.138
16.5
.650 0.5
.020
15.24
.600 10.16
.400
29.0
1.142
1.80
.071
+1
8
24
mm inch
PC board pattern (Bottom view)
Tolerance: ±0.1 ±.004
1.50 dia.
0.59 dia.
10.16
.400
10.16
.400
15.24
.600
6. 1 Form B, with test button
General tolerance: ±0.3 ±.012
Schematic (Bottom view)
Single side stable type
10.16
.400
9.0
.354
6.3
.248
13.0
.512
3.5
.138
16.5
.650
18.2
.717
0.5
.020
15.24
.600 10.16
.400
29.0
1.142
1.80
.071
+1
8
24
PC board pattern (Bottom view)
Tolerance: ±0.1 ±.004
1.50 dia.
0.59 dia.
10.16
.400
10.16
.400
15.24
.600
7. 1 Form A 1 Form B, without test button
General tolerance: ±0.3 ±.012
Schematic (Bottom view)
1 coil latching typeSingle side stable type 2 coil latching type
16.5
.650 0.5
.020
15.24
.600
29.0
1.142
1.80
.071 5.08
.200 5.08
.200
10.16
.400
13.0
.512
10.16
.400
13.0
.512
3.5
.138
3.5
.138
3.5
.138
10.16
.400
13.0
.512
1 coil latching typeSingle side stable type 2 coil latching type
8
1
+
7 5
43
+8
1
7 5
43
8
8
9
+1
7 5
43
PC board pattern (Bottom view)
Tolerance: ±0.1 ±.004
2 coil latching type only
15.24
.600
5.08
.200
5.08
.200
5.08
.200
5.08
.200
1.50 dia.
0.59 dia.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
DJ (ADJ)
8. 2 Form C, without test button
General tolerance: ±0.3 ±.012
Schematic (Bottom view)
1 coil latching typeSingle side stable type 2 coil latching type
10.16
.400
13.0
.512
10.16
.400
13.0
.512
3.5
.138
3.5
.138
3.5
.138
10.16
.400
13.0
.512
16.5
.650 0.5
.020
15.24
.600
29.0
1.142
1.80
.071 5.08
.200 5.08
.200
1 coil latching typeSingle side stable type 2 coil latching type
8
1
+
7
2
6 5
34
+8
1 3
6
7
2
5
4
8
9
+1
7
2
6 5
43
mm inch
PC board pattern (Bottom view)
Tolerance: ±0.1 ±.004
2 coil latching type only
15.24
.600
5.08
.200
5.08
.200
5.08
.200
5.08
.200
1.50 dia.
0.59 dia.
9. 2 Form A, without test button
General tolerance: ±0.3 ±.012
Schematic (Bottom view)
1 coil latching typeSingle side stable type 2 coil latching type
10.16
.400
13.0
.512
10.16
.400
13.0
.512
3.5
.138
3.5
.138
3.5
.138
10.16
.400
13.0
.512
16.5
.650 0.5
.020
20.32
.800
29.0
1.142
1.80
.071 5.08
.200
1 coil latching typeSingle side stable type 2 coil latching type
8
1
+
6 5
43
+8
1
6 5
43
8
9
+1
6 5
34
PC board pattern (Bottom view)
Tolerance: ±0.1 ±.004
2 coil latching type only
20.32
.800 5.08
.200
5.08
.200
5.08
.200
1.50 dia.
0.59 dia.
10. 2 Form B, without test button
General tolerance: ±0.3 ±.012
Schematic (Bottom view)
Single side stable type
10.16
.400
13.0
.512
3.5
.138
16.5
.650 0.5
.020
15.24
.600 10.16
.400
29.0
1.142
1.80
.071
Single side stable type
8
1
+
7
2
5
4
PC board pattern (Bottom view)
Tolerance: ±0.1 ±.004
1.50 dia.
0.59 dia.
10.16
.400
10.16
.400
15.24
.600
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
DJ (ADJ)
REFERENCE DATA
NOTES
1. Max. switching capacity 2. Temperature rise
Sample: ADJ12024, 6 pcs.
Coil applied voltage: 0 %V, Contact current: 16 A, 20 A
Measured portion: Contact, Ambient temperature:
25°C 77°F, 85°C 185°F
3. Coil temperature rise
Sample: ADJ56024, 6 pcs.
Coil applied voltage: 100 %V, 130 %V of rating
Contact current: 0 A, 10 A
Measured portion: Inside the coil, Ambient
temperature: Room temperature, 70°C 158°F
Contact voltage, V
100 100
1,000
100
10
AC resistive load
(2-pole)
AC resistive load
(1-pole)
Contact current, A
5
10
20
35
40
Contact current, A
Temperature rise, °C
010 25
0
15
25
30
51520
+25°C
+85°C
50
40
30
20
10
090 100 110 120 130 140
Coil applied voltage, %V
Temperature rise, °C
10A
room temperature
10A 70°C
0A
room temperature
0A 70°C
4. Set and Reset time
Sample: ADJ12024, 10 pcs
Coil applied voltage: 80 %V, 100 %V, 120 %V of rating
5. Ambient temperature characteristics
Sample: ADJ12024, 6pcs
Ambient temperature: –40°C to 85°C –40°F to 185°F
6. Influence of adjacent mounting
Sample: ADJ12024, 6pcs
Ambient temperature: Room temperature
5
10
20
30
Coil applied voltage, %V
Set and Reset time, ms
70 90 130
0
15
25
80 100 110 120
Max.
Min.
x
–10
10
20
30
–20
–30
–60 –40 –20 0 4020 60 80 100
Ambient
temperature, °C
Change rate
to nominal V, %V
Set
Reset
121086402
–5
0
5
OFF
OFF
OFF
–5
0
5
Reset voltage
Change rate to nominal V, %V
Distance between relays , mm
Set voltage
1. Coil operating power
Pure DC current should be applied to the
coil. The wave form should be
rectangular. If it includes ripple, the ripple
factor should be less than 5%. However,
check it with the actual circuit since the
characteristics may be slightly different.
2. Coil connection
When connecting coils, refer to the wiring
diagram to prevent mis-operation or
malfunction.
3. Soldering
We recommend the following soldering
conditions
Soldering: 260°C±5°C 500°F±41°F,
max. 6 s
4. Others
1) If the relay has been dropped, the
appearance and characteristics should
always be checked before use.
2) The cycle lifetime is defined under the
standard test condition specified in the
JIS* C 5442-1996 standard (temperature
15 to 35°C 59 to 95°F, humidity 25 to
85%). Check this with the real device as it
is affected by coil driving circuit, load
type, activation frequency, activation
phase,ambient conditions and other
factors.
Also, be especially careful of loads such
as those listed below.
When used for AC load-operating and
the operating phase is synchronous.
Rocking and fusing can easily occur due
to contact shifting.
• High-frequency load-operating
When high-frequency opening and
closing of the relay is performed with a
load that causes arcs at the contacts,
nitrogen and oxygen in the air is fused by
the arc energy and HNO3 is formed. This
can corrode metal materials.
Three countermeasures for these are
listed here.
• Incorporate an arc-extinguishing circuit.
• Lower the operating frequency
• Lower the ambient humidity
3) For secure operations, the voltage
applied to the coil should be nominal
voltage. In addition, please note that pick-
up and drop-out voltage will vary
according to the ambient temperature
and operation conditions.
4) Heat, smoke, and even a fire may
occur if the relay is used in conditions
outside of the allowable ranges for the
coil ratings, contact ratings, operating
cycle lifetime, and other specifications.
Therefore, do not use the relay if these
ratings are exceeded. Also, make sure
that the relay is wired correctly.
5) Incorrect wiring may cause
unexpected events or the generation of
heat or flames.
6) Check the ambient conditions when
storing or transporting the relays and
devices containing the relays. Freezing or
condensation may occur in the relay,
causing functional damage. Avoid
subjecting the relays to heavy loads, or
strong vibration and shocks.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
DJ (ADJ)
For Cautions for Use, see Relay Technical Information.
5. Usage, transport and storage
conditions
1) Ambient temperature, humidity, and
atmospheric pressure during usage,
transport, and storage of the relay:
•Temperature:
–40 to +70°C –40 to +158°F
Humidity: 5 to 85% RH
(Avoid freezing and condensation.)
The humidity range varies with the
temperature. Use within the range
indicated in the graph below.
Atmospheric pressure: 86 to 106 kPa
Temperature and humidity range for
usage, transport, and storage
2) Condensation
Condensation forms when there is a
sudden change in temperature under
high temperature and high humidity
conditions. Condensation will cause
deterioration of the relay insulation.
3) Freezing
Condensation or other moisture may
freeze on the relay when the
temperatures is lower than 0°C 32°F.
This causes problems such as sticking of
movable parts or operational time lags.
4) Low temperature, low humidity
environments
The plastic becomes brittle if the relay is
exposed to a low temperature, low
humidity environment for long periods of
time.
6. Test button (manual lever) operation
The relay contacts switch over as follows:
;;
;;;;
;;;;;;
;;;;;;;;
;;;;;;;;;;
;;;;;;;;;;
;;;;;;;;;
;;;;;;;;
;;;;;;
;;;;
;;
Humidity, %RH
Temperature, °C °F
Tolerance range
85
5
0
+32 70
+158
–40
–40
(Avoid freezing
when used at
temperatures lower
than 0°C 32°F
(Avoid
condensation
when used at
temperatures higher
than 0°C 32°F
2-4 terminal 4-6 terminal
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.