Rev. 0.3 5/09 Copyright © 2009 by Silico n Laboratories Si500D
This information applies to a product under development. Its characteristics and specifications are subject to change without notice.
Si500D
DIFFERENTIAL OUTPUT SILICON OSCILLATOR
Features
Specifications
Quartz-free, MEMS-free, and PLL-free all-silicon
oscillator
Any-rate output frequencies from 0.9 to 200 MHz
Short lead times
Excellent temperature stability (±20 ppm)
Highly reliable startup and operation
High immunity to shock and vibration
Low jitter: <1.5 ps
0 to 85 °C operation includes 10-year aging in hot
environments
Footprint compatible with industry-
standard 3.2 x 5.0 mm XOs
CMOS and SSTL versions available
Driver stopped, tri-state, or powerdown
operation
RoHS compliant
1.8, 2.5, or 3.3 V options
Low power
More than 10x better fit rate than
competing crystal solutions
Parameters Condition Min Typ Max Units
Frequency Range 0.9 — 200 MHz
Frequency Stability
Temperature stability,
0 to +70 °C — ±10 — ppm
Temperature stability,
0 to +85 °C — ±20 — ppm
Total stability,
0 to +70 °C operation1— — ±150 ppm
Total stability,
0 to +85 °C operation2— — ±250 ppm
Operating Temperature 0 — +85 C°
Storage Temperature –55 — +125 C°
Supply Voltage 1.8 V option 1.71 — 1.98 V
2.5 V option 2.25 — 2.75 V
3.3 V option 2.97 — 3.63 V
Supply Current
LVPECL — 34.0 36.0 mA
Low Power LVPECL — 19.3 22.2 mA
LVDS — 14.9 16.5 mA
HCSL — 25.3 29.3 mA
Diff ere n ti a l C M OS(3 . 3 V
option,10 pF,200 MHz) — 29.0 31.8 mA
Differential SSTL-3 — 24.5 27.7 mA
Differential SSTL-2 — 24.3 26.7 mA
Differential SSTL-18 — 22.2 25 mA
Tri-State — 9.7 10.7 mA
Powerdown — 1.0 1.9 mA
Output Symmetry VDIFF = 0 46 – 13 ns/TCLK — 54 + 13 ns/TCLK %
Notes:
1. Inclusive of 25 °C initial frequency accuracy, operating temperature range, supply voltage change, output load change,
first-year aging at 25 °C, shock, vibration, and one solder reflow.
2. Inclusive of 25 °C initial frequency accuracy, operating temperature range, supply voltage change, output load change,
ten-year aging at 85 °C, shock, vibration, and one solder reflow.
3. See “AN409: Output Termination Options for the Si500S and Si500D Silicon Oscillators” for further details regarding
output clock termination recommendations.
4. Min column entries are minima of VOH. Max column entries are maxima of VOL.
Si500D
2 Rev. 0.3
Rise and Fall Times (20/80%)3LVPECL/LVDS — — 460 ps
HCSL/Differential SSTL — — 800 ps
Differential CMOS, 15 pF, >80 MHz — 1.1 1.6 ns
LVPECL Output Option
(DC coupling, 50 to VDD –
2.0 V)3
Mid-level VDD – 1.5 — VDD – 1.34 V
Diff swing .720 — .880 VPK
Low Power LVPECL Output
Option
(AC coupling, 100 Differential
Load)3
Mid-level — N/A — V
Diff swing .68 — .95 VPK
LVDS Output Option (2.5/3.3 V)
(RTERM = 100 diff)3Mid-level 1.15 — 1.26 V
Diff swing 0.25 — 0.45 VPK
LVDS Output Option (1. 8 V)
(RTERM = 100 diff)3Mid-level 0.85 — 0.96 V
Diff swing 0.25 — 0.45 VPK
HCSL Output Option3Mid-level 0.35 — 0.425 V
Diff swing 0.65 — 0.82 VPK
DC termination per pad 4 5 — 55
CMOS Output Voltage3 VOH, sourcing 9 mA VDD –0.6 — — V
VOL, sinking 9 mA — — 0.6 V
SSTL Output Voltage4SSTL-18 .5 x VDD + 0.375 — .5 x VDD –
0.375 V
SSTL-2 .5 x VDD + 0.48 — .5 x VDD – 0.48 V
SSTL-3 .45 x VDD + 0.48 — .45 VDD – 0.48 V
Powerup Time From time VDD crosses min spec
supply ——2ms
OE Deassertion to Clk S top — — 250 + 3 x TCLK ns
Return from Output Driver
Stopped Mode — — 250 + 3 x TCLK ns
Return From Tri-State Time — — 12 + 3 x TCLK µs
Return From Powerdown Time — — 2 ms
Period Jitter (1-sigma) Non-CMOS — 1 2 ps
RMS
CMOS, CL=7pF — 1 3 ps
RMS
Integrated Phase Jitter
1.0 MHz – min(20 MHz,
0.4 x FOUT),non-CMOS —0.61
ps
RMS
1.0 MHz – min(20 MHz,
0.4 x FOUT),CMOS format —0.71.5
ps
RMS
Parameters Condition Min Typ Max Units
Notes:
1. Inclusive of 25 °C initial frequency accuracy, operating temperature range, supply voltage change, output load change,
first-year aging at 25 °C, shock, vibration, and one solder reflow.
2. Inclusive of 25 °C initial frequency accuracy, operating temperature range, supply voltage change, output load change,
ten-year aging at 85 °C, sho ck, vibration, an d one solder reflow.
3. See “AN409: Output Termination Options for the Si500S and Si500D Silicon Oscillators” for further details regarding
output clock termination recommen dations.
4. Min column entries are minima of VOH. Max column entries are maxima of VOL.
Si500D
Rev. 0.3 3
Package Specifications
Figure 1. Recommended Land Pattern Figure 2. Top Mark
Table 1. Package Diagram Dimensions (mm)
Dimension Min Nom Max Dimension Min Nom Max
A 0.80 0.85 0.90 L1 0.00 0.05 0.10
A1 0.00 0.03 0.05 aaa — — 0.10
b 0.59 0.64 0.69 bbb — — 0.10
D 3.20 BSC. ccc — — 0.08
e 1.27 BSC. ddd — — 0.10
E 4.00 BSC. eee — — 0.05
L 0.95 1.00 1.05
Table 2. Pad Connections
1OE
2NC—Make no external
connection to this pin
3GND
4 Output
5 Complementary Output
6VDD
Dimension (mm)
C1 2.70
E 1.27
X1 0.75
Y1 1.55
Table 3. Tri-State/Powerdown/Driver Stopped
Function on OE (3rd Option Code)
AB C D E F
Open Active Active Active Active Active Active
1
Level Active Tri-
State Active Power-
down Active Driver
Stopped
0
Level Tri-
State Active Power-
down Active Driver
Stopped Active
0CCCCC
TTTTTTYY
0 = Si500
CCCCC = mark code
TTTTTT = assembly manufacturing code
YY = year
WW = work week
WW
Si500D
4 Rev. 0.3
Environmental Compliance
Ordering Information
The Si500D supports a variety of options including frequency, output format, supply voltage, and tri-
state/powerdown. Specific device configurations are programmed into the Si500D at time of shipment.
Configurations are specified using the figure below. Silicon Labs provides a web-based part number utility that can
be used to simplify part number configuration. Refer to www.silabs.com/SiliconXOPartnumber to access this tool.
The Si500D XO series is supplied in a ROHS-compliant, Pb-free, 6-pad, 3.2 x 4.0 mm package. Tape and reel
packaging is available as an ordering option.
Parameter Conditions/Test Method
Mechanical Shock MIL-STD-883, Method 2002.4
Mechanical Vibration MIL-STD-883, Method 2007.3 A
Resistance to Soldering Heat MIL-STD-202, 260 C° for 8 seconds
Solderability MIL-STD-883, Method 2003.8
Damp Heat IEC 68-2-3
Moisture Sensitivity Level J-STD-020, MSL 3
500D X X
Si500
Differential
Oscillator
VDD
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
1.8
1.8
1.8
1.8
1.8
1.8
Format
LVPECL
Low Power LVPECL
LVDS
HCSL
Dual Output CMOS
Differe n t ial C MO S
Dual Output SSTL
Differe n t ial S S TL
LVPECL
Low Power LVPECL
LVDS
HCSL
Dual Output CMOS
Differe n t ial C MO S
Dual Output SSTL
Differe n t ial S S TL
LVDS
HCSL
Dual Output CMOS
Differe n t ial C MO S
Dual Output SSTL
Differe n t ial S S TL
1st Op tion Co de
2nd Option Code
Stability (ppm, max)
XXXMXXXX A C X R
Frequency
xMxxxxx: fOUT < 10 MHz
xxMxxxx: 10 MHz < fOUT < 100 MHz
xxxMxxx: fOUT > 100 MHz
R = Tape & Reel
Blank = Tubes
Product Revision = C
Package
A 3.2 x 4.0 mm SMD
3rd Option Code
Tri-State/Powerdown/
Output Driver Stopped
A
B
C
D
E
F
OE a ctive hig h/tristate
OE a c tive low/tristate
OE active high/powerdown
OE active low/powerdown
OE active high/driver stopped
OE active low/driver stopped
Oper. Temp Range
F 0 to 70 °C
H 0 to 85 °C
A ±150
B ±250
Si500D
Rev. 0.3 5
DOCUMENT CHANGE LIST
Revision 0.2 to Revision 0.3
Revision B to Revision C updated in Ordering Information
0 to 85 C° Operating Temperature Ra nge option added
Si500D
6 Rev. 0.3
CONTACT INFORMATION
Silicon Laboratories Inc.
400 West Cesar Chavez
Austin, TX 78701
Tel: 1+(512) 416-8500
Fax: 1+(512) 416-9669
Toll Free: 1+(877) 444-3032
Please visit the Silicon Labs Technical Support web page
and register to submit a technical support request.
Silicon Laboratories and Silicon Labs are trademarks of Silicon Laboratories Inc.
Other products or brandnames mentioned herein are trademarks or registered trademarks of their respective holders.
The information in this document is believed to be accurate in all respects at the time of publication but is subject to change without notice.
Silicon Laboratories assumes no responsibility for errors and omissions, and disclaims responsibility for any consequences resulting from
the use of information included herein. Additionally, Silicon Laboratories assumes no responsibility for the functioning of undescribed features
or parameters. Silicon Laboratories reserves the right to make changes without further notice. Silicon Laboratories makes no warranty, rep-
resentation or guarantee regarding the suitability of its products for any particular purpose, nor does Silicon Laboratories assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation conse-
quential or incidental damages. Silicon Laboratories products are not designed, intended, or authorized for use in applications intended to
support or sustain life, or for any other application in which the failure of the Silicon Laboratories product could create a situation where per-
sonal injury or death may occur. Should Buyer purchase or use Silicon Laboratories products for any such unintended or unauthorized ap-
plication, Buyer shall indemnify and hold Silicon Laboratories harmless against all claims and damages.
