PTR016V0900-BK - Cooper Bussmann - Datasheet.Directory

16 Volt DC Radial Leaded, PolyTron™ PTC Devices

PolyTron™PTR016V Series

0111 BU-SB11018 Page 1 of 4 Data Sheet 4399

Radial Leaded Device

Description

• PolyTron™ radial leaded thru-hole PTC device

• Maximum 16 volts

• Current ratings from 0.75 to 15 amps

• Fast time-to-trip

• Low resistance

• Halogen free

• Lead free

• RoHS compliant

Notes: Ihold – Hold current: Maximum current device will pass without interruption in 23°C still air.

Itrip – Trip current: Minimum current that will switch the device from low resistance to high resistance in 23°C still air.

Vmax: Maximum continuous voltage device can withstand without damage at rated current.

Imax: Maximum fault current device can withstand without damage at rated voltage.

Pd: Power dissipated from device when in the tripped state in 23°C still air.

Ri(min.): Minimum resistance of device as supplied at 23°C unless otherwise specified.

Ri(max.): Maximum resistance of device as supplied at 23°C unless otherwise specified.

R1(max.): Maximum resistance of device when measured one hour post reflow (SMD) or one hour post trip (radial-leaded device) at 23°C unless otherwise specified.

Specifications

Ihold Itrip PdTime to Resistance (Ω) Agency

Catalog Vmax Imax @23°C @23°C Typ. Trip (Max.) Initial (Ri) Post Trip (R1) Information

Number (Vdc) (Amps) (Amps) (Amps) (W) (Amps) (Sec) Min. Max. Max. cURus TUV

PTR016V0075 16 40 0.75 1.50 0.30 8.00 0.40 0.110 0.175 0.230 X

PTR016V0090 16 40 0.90 1.80 0.60 8.00 1.20 0.070 0.120 0.180 X

PTR016V0110 16 40 1.10 2.20 0.70 8.00 2.30 0.050 0.095 0.140 X

PTR016V0120 16 40 1.20 2.40 0.60 8.00 0.50 0.065 0.0975 0.140 X

PTR016V0135 16 40 1.35 2.70 0.80 8.00 4.50 0.040 0.074 0.120 X

PTR016V0155 16 40 1.55 3.10 0.70 8.00 0.60 0.043 0.0705 0.100 X

PTR016V0160 16 40 1.60 3.20 0.90 8.00 9.00 0.030 0.061 0.110 X

PTR016V0185 16 40 1.85 3.70 1.00 8.00 10.00 0.030 0.051 0.090 X

PTR016V0250 16 40 2.50 5.00 1.20 8.00 40.00 0.020 0.036 0.070 X

PTR016V0300 16 100 3.00 5.10 2.30 15.00 1.00 0.038 0.065 0.098 X X

PTR016V0400 16 100 4.00 6.80 2.40 20.00 1.70 0.021 0.038 0.060 X X

PTR016V0500 16 100 5.00 8.50 2.60 25.00 2.00 0.010 0.023 0.034 X X

PTR016V0600 16 100 6.00 10.20 2.80 30.00 3.30 0.006 0.018 0.028 X X

PTR016V0700 16 100 7.00 11.90 3.00 35.00 3.50 0.006 0.013 0.020 X X

PTR016V0800 16 100 8.00 13.60 3.00 40.00 5.00 0.005 0.011 0.018 X X

PTR016V0900 16 100 9.00 15.30 3.30 45.00 5.50 0.005 0.009 0.014 X X

PTR016V1000 16 100 10.00 17.00 3.60 50.00 6.00 0.004 0.007 0.010 X X

PTR016V1100 16 100 11.00 18.70 3.70 55.00 7.00 0.003 0.006 0.009 X X

PTR016V1200 16 100 12.00 20.40 4.20 60.00 7.50 0.003 0.006 0.009 X X

PTR016V1300 16 100 13.00 22.10 4.60 65.00 8.50 0.002 0.006 0.008 X X

PTR016V1400 16 100 14.00 23.80 4.60 70.00 9.00 0.002 0.005 0.007 X X

PTR016V1500 16 100 15.00 25.50 4.60 75.00 10.00 0.002 0.005 0.007 X X

Agency Information

• cURus: Recognized Card: File E343021 (Ihold 3A-15A)

• TUV File: J 50194729

Part Number System/Ordering

PT R 016V 0075 -TR

PolyTron™ PTC Device Series

Radial Leaded

Maximum Voltage

Current Holding (Ihold)

Packaging and Lead Type Code

Lead Codes: TR & BK - Straight Leads, TR1 & BK1 - Kinked Leads

TR & TR1 On Reels BK & BK1 In Poly Bags

• 0.75-1.85A - 3000 devices • 0.75-1.60A - 1000 devices

• 2.5-4A - 2500 devices • 1.85-9.00A - 500 devices

• 5-7A - 1500 devices • 10.00-15.00A - 250 devices

• 8-15A - 1000 devices

Applications

• Medical equipment • White goods

• Telecommunications • Computers and peripherals

HALOGEN

FREE

0111 BU-SB11018 Page 2 of 4 Data Sheet 4399

Style 3

Style 2

Style 1

Dimensions - mm

B Max Figure/

Lead Type Lead Style

Part A Straight Kink D E Straight Kink

Number Max. (-TR) (-TR1) C Min. Max. F TR TR1

PTR016V0075 7.0 - 11.4 5.0±0.8 7.6 3.1 0.5±0.02 - 3

PTR016V0090 7.4 12.2 12.2 5.0±0.8 7.6 3.1 0.5±0.02 2 1

PTR016V0110 7.4 14.2 14.2 5.0±0.8 7.6 3.1 0.5±0.02 2 1

PTR016V0120 7.0 - 11.7 5.0±0.8 7.6 3.1 0.5±0.02 - 3

PTR016V0135 8.9 13.5 13.5 5.0±0.8 7.6 3.1 0.5±0.02 2 1

PTR016V0155 6.9 - 11.7 5.0±0.8 7.6 3.1 0.5±0.02 - 3

PTR016V0160 8.9 15.2 15.2 5.0±0.8 7.6 3.1 0.5±0.02 2 1

PTR016V0185 10.2 15.7 15.7 5.0±0.8 7.6 3.1 0.5±0.02 2 1

PTR016V0250 11.4 18.3 20.5 5.0±0.8 7.6 3.1 0.5±0.02 2 1

PTR016V0300 7.1 11.0 14.0 5.0±0.8 7.6 3.1 0.8±0.02 2 1

PTR016V0400 8.9 12.8 14.8 5.0±0.8 7.6 3.1 0.8±0.02 2 1

PTR016V0500 10.4 14.3 16.0 5.0±0.8 7.6 3.1 0.8±0.02 2 1

PTR016V0600 10.7 17.1 19.0 5.0±0.8 7.6 3.1 0.8±0.02 2 1

PTR016V0700 11.2 19.7 22.0 5.0±0.8 7.6 3.1 0.8±0.02 2 1

PTR016V0800 12.7 20.9 23.0 5.0±0.8 7.6 3.1 0.8±0.02 2 1

PTR016V0900 14.0 21.9 24.0 5.0±0.8 7.6 3.1 0.8±0.02 2 1

PTR016V1000 16.5 25.2 28.0 5.0±0.8 7.6 3.1 0.8±0.02 2 1

PTR016V1100 17.5 26.0 29.0 5.0±0.8 7.6 3.1 0.8±0.02 2 1

PTR016V1200 17.5 28.0 31.0 10.0±0.8 7.6 3.1 1.0±0.02 2 1

PTR016V1300 21.6 29.2 32.0 10.0±0.8 7.6 3.1 1.0±0.02 2 1

PTR016V1400 23.5 27.9 30.0 10.0±0.8 7.6 3.1 1.0±0.02 2 1

PTR016V1500 25.1 29.0 32.0 10.0±0.8 7.6 3.1 1.0±0.02 2 1

Time-to-Trip Curves at 23°C - 0.75-2.5A

0.001

0.01

0.1

100

1000

110 100

TIM E IN S EC ON D S

Fault Current (A)

A:PTR016V0075

B:PTR016V0090

C :PTR016V0110

D :PTR016V0120

E:PTR016V0135

F :PTR016V0155

G :PTR016V0160

H :PTR016V0185

I:PTR016V0250

B D E G H I

0.001

0.01

0.1

100

1000

110 100

TIME IN SECONDS

Fault Current (A)

J :PTR016V0300

K:PTR016V0400

L:PTR016V0500

M :PTR016V0600

N :PTR016V0700

O :PTR016V0800

P:PTR016V0900

Q :PTR016V1000

R :PTR016V1100

S:PTR016V1200

T :PTR016V1300

U :PTR016V1400

V:PTR016V1500

J K L M N O P Q R S T U V

0111 BU-SB11018 Page 3 of 4 Data Sheet 4399

Time-to-Trip Curves at 23°C - 3.0-15A

0.0

20.0

40.0

60.0

80.0

100.0

120.0

140.0

160.0

180.0

200.0

-40-20 0 20406080

Percentage of Derated Current

Tem perature (°C)

Thermal Derating Curve

Recommended Wave Solder Profile

Material Composition

• Lead material:

- PTR016V0075-PTR016V0250 Tin-plated copper clad steel

- PTR016V0300-PTR016V1500 Tin-plated copper

• Insulating material: Cured epoxy resin meeting UL 94V0 requirements

Note 1

Note 3

Note 2

CoolingSoldering

130 ± 200°C

Tamb

Time

Temperature

Preheating

30~90sec <1sec <10sec

260°C max

Environmental Specifications

Characteristic Value

Operating Temperature Range -40°C to +85°C

Surface Temperature Trip State 125°C max.

Thermal Shock +85°C to -40°C , 10 cycles,

5% typical resistance change

Solvent Resistance MIL-STD-202 Method 215, no change

Humidity Age Test +85°C, 85% R.H., 1000 hours

±5% typical resistance change.

Specified temperature (23°C ± 3°C)

Storage Temperature Range -10°C to +40°C

Storage Duration One year

Storage Relative Humidity <_75%

Storage Conditions Keep away from corrosive atmosphere and sunlight

Recommended Reworking Conditions with Soldering Iron

• Soldering Iron Tip Temperature: 360°C max.

• Solder Time: 3 seconds max.

• Distance from Thermistor: 2mm min.

Notes:

1. (1-3)°C/sec

2. Approximately 200°C/sec

3. 5°C/sec Maximum

www.cooperbussmann.com

0111 BU-SB11018 Page 4 of 4 Data Sheet 4399

The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is

intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change

design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information con-

tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.

Life Support Policy: Cooper Bussmann does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life sup-

port systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result

in significant injury to the user.

Packaging/Taping Specifications

IEC Dimension Tolerance

Description Mark (mm) (mm)

Sprocket hole pitch P012.7 ±0.3

Ordinate to adjacent component lead:

PTR016V0075~PTR016V0250 P13.6 ±1.0

PTR016V0300~PTR016V1100 P14.5 ±1.0

PTR016V1200~PTR016V1500 P17.2 ±1.0

Device pitch:

PTR016V0075~PTR016V0600 P 12.7 ±1.0

PTR016V0700~PTR016V1400 P 25.4 ±1.0

PTR016V1500 P 38.1 ±1.0

Lead spacing C * --

Carrier tape width W 18 ±1.0

Top distance between tape edges W03.0 Max.

Hold-down tape width W112 ±1.0

Sprocket hole position W29.0 +0.75/-0.5

Abscissa to top:

PTR016V0075~PTR016V0600 H132.2 Max.

PTR016V0700~PTR016V1500 H147.5 Max.

Abscissa to plane

(straight lead) H 18.0 +2/-0

(kinked lead) H016.0 ±0.5

Sprocket hole diameter D04 ±0.2

Lead protrusion L11 Max.

Tape thickness t 0.9 Max.

Body lateral deviation Δh0 ±1.0

Body tape plane deviation Δp0 ±1.3

Reel width W356 Max.

Reel diameter 340 ±10

Arbor hole diameter n031 ±1

Core diameter n 80 Min.

* See Dimensions table.

Style 3 - PTR016V1200-PTR016V1500

Reel Specifications

Style 2 - PTR016V0090, PTR016V0110, PTR016V0135,

PTR016V0160-PTR016V1000

Style 1 - PTR016V0075, PTR016V0120, PTR016V0155