L2WCP160 Series 160W, 120-277Vac Input, Programmable Constant Power LED Driver Features * * * * * * * * * * * * Power Rating: 160W Input Voltage: 120-277Vac Constant current and constant voltage hybrid output Output current (450mA-6670mA) Output current programmable with Near Field Communication controller Efficiency to 94% Compatible with 0-10V, PWM, Timer, Dim-to-off option, 12V/200mA AUX UL, Type HL, Type TL Lightning, OVP, SCP, OTP, & Over Current Protection IP67 5-year warranty Surge Protection: Diff: 6kV, Common: 10kV *Near Field Communication controller *Product images are for illustrative purposes only and may vary from actual design. Application * Indoor and outdoor applications Model List*(See part number scheme for model number details) Output Power Output Voltage Output Current Min. Output Current Max. Efficiency 110V/220V 24-36V 2670mA 6670mA 89%/91% UL/cUL 120-277Vac 160W 160W 36-48V 1770mA 4440mA 90%/92% UL/cUL 120-277Vac 160W 48-80V 1330mA 3330mA 92%/93% UL/cUL 120-277Vac 160W 80-140V 800mA 2000mA 92%/94% UL/cUL 160W 120-277Vac 140-233V 450mA 1140mA (Add-J for J-Box, Ex.) L2WCP160SXXXST-J-XYZ; Contact Autec Sales for all options.) 91%/93% UL/cUL Input Voltage Range Model Number L2WCP160S667ST-XYZ L2WCP160S444ST-XYZ L2WCP160S333ST-XYZ L2WCP160S200ST-XYZ L2WCP160S114ST-XYZ 120-277Vac Certification Ordering options XY= Programmable FC=Near Field Communication Z=Dimming D=DALI Dimming B=BLE Dimming Technical Data Input voltage range Frequency Power factor Output voltage Output power Ripple and Noise 120-277Vac 47-63Hz > 0.99 @115Vac & 80~100% Full load, > 0.97 @230Vac & 80~100% Full load 24-233V 160W 2.5%Vo Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com September 18, 2019 1/8 L2WCP160 Series 160W, 120-277Vac Input, Programmable Constant Power LED Driver Technical Data(cont.) Max input current Max input Power Efficiency Line Regulation Load Regulation Inrush Current Dimming THD Current Programmable Output Current Programmable Range Over Current Protection Short Current Protection Over Voltage Protection Over Temp. Protection Operating Temperature Max T-case Temp. Operating Humidity Storage Temp., Humidity Temp. Coefficient Vibration Dimensions Packing Weight 1.56A @115Vac, 0.76A@230Vac 160W 89-94% 0.3% 1.2% 65A @230Vac cold start +25 0~10V/ PWM/ Timer, Dim-to-off option < 20% Yes 450-6670mA Protection type: Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed 1.3VoProtection type: Hiccup mode, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed -35~+70C 83C 10 ~ 100% RH non-condensing -40 ~+85, 5 ~ 100% RH 0.05% (0~50) 10~500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes 196x70x37mm 7.7x2.75x1.26 in 25pcs/carton 832.6g Safety Compliance Safety Standards Withstand Voltage Isolation Resistance EMC Emission EMC Immunity UL8750, UL935, UL1012, CSA-C22.2 No.107.1, EN61347-1, EN61347-2-13 I/P - O/P: 3.75kVAC I/P - O/P: 100M Ohms / 500VDC /25 / 70% RH Compliance to EN55015, EN61000-3-2 Class C (60% load); EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024 Disclaimer: Autec Power Systems' (Autec) LED Drivers are Hi-Pot tested during the manufacturing process. Autec assumes no responsibility for secondary Hi-Pot testing at customer location or designated production line(s). Should customer require further Hi-Pot testing, at their own production line, following assembly of the LED Driver into the customer's assembled fixture, Autec requests advance notice. This request must be communicated to Autec in a timely manner and is recommended to be requested at time of issuing each purchase order. Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com September 18, 2019 2/8 L2WCP160 Series 160W, 120-277Vac Input, Programmable Constant Power LED Driver Derating curve Static Characteristics Power Factor vs. Output Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com September 18, 2019 3/8 L2WCP160 Series 160W, 120-277Vac Input, Programmable Constant Power LED Driver THD vs. Output Efficiency vs Output Lifetime vs Case Temp. Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com September 18, 2019 4/8 L2WCP160 Series 160W, 120-277Vac Input, Programmable Constant Power LED Driver Near Field Communication Controller NOTE: Dimming 1. The Near Field Communication controller can program the output current, voltage and timer delays. 2. The Near Field Communication programming is a non-contact process, therefore much safer compared to traditional programming methods. 3. Power devices can be programmed without AC power applied to the driver. 4. 0-10V Analog Dimming &PWM Dimming DIM-TO-OFF NON-DIM-TO-OFF 110.00% 110.00% 90.00% 90.00% 70.00% 70.00% 50.00% 50.00% 30.00% 30.00% 10.00% 10.00% -10.00% 0 2 4 6 8 GND Grey Dimming wire 0-10V&PWM Purple 12V AUX Yellow Input Dimming Voltage 0-10V DIM+ Source Current 0-1mA 12V AUX Source Current 200mA PWM Frequency Range PWM high level -10.00% 0 10 2 4 6 8 10 NOTE: 1. Io is actual output current and Ir is rated current without dimming control. 2. For the driver to operate properly, the load voltage must be in the working voltage range. 3. We have DIM-TO-OFF option, programmed by the programmer. 0.5-3KHZ 4. Maximum input voltage for the dimming wire is 12V. 10V 5. AUX wire is only for source, can't connect to other voltage source. which Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com September 18, 2019 5/8 can be L2WCP160 Series 160W, 120-277Vac Input, Programmable Constant Power LED Driver PWM Dimming TIMER Dimming NOTE: 1. The dimming time can be programmed by the programmer. 2. The time of t1 and t2 can be set by the programmer.(0.5h step) 3. The value of I1 and I2 can be set by the programmer. 4. Changing the current from I1 to I2 may take a few min. Mechanical Design BLACK(ACL) WHITE(ACN) GREEN(GND) RED(V+) BLACK(V-) PURPLE(Dim+) GREY(Dim-) YELLOW(12V Aux) Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com September 18, 2019 6/8 L2WCP160 Series 160W, 120-277Vac Input, Programmable Constant Power LED Driver Mechanical Design J-Box Part Number Scheme L2 W C P 160 S XXX S T-XYZ -XYZ=Programming and dimming options. *See ordering options table on page 1. L2=LED Driver Series T=Class I, 3 Wire Input W=Input Voltage 120-277Vac S=Metal case C=Constant Power P=Programmable XXX=Rated Current Ex.) 114=1140mA 667=6670mA 160=Output Power(Watts) S=Single Output Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com September 18, 2019 7/8 L2WCP160 Series 160W, 120-277Vac Input, Programmable Constant Power LED Driver Part Number Scheme L2 W C P 160 S XXX S T -J-XYZ L2=LED Driver Series -XYZ=Programming and dimming options. *See ordering options table on page 1. -J=J-Box W=Input Voltage 120-277Vac T=Class I, 3 Wire Input C=Constant Power P=Programmable 160=Output Power(Watts) S=Metal case XXX=Rated Current Ex.) 114=1140mA 667=6670mA S=Single Output *Product images are for illustrative purposes only and may vary from actual design. *Specifications are subject to change without notice. Autec is not responsible for issues arising from errors or omissions. Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com September 18, 2019 8/8