160W, 120-277Vac Input, Programmable Constant Power LED Driver
Technical Sales / Customer Service: +1-818-338-7788 • Email: sales@autec.com
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA • www.autec.com
September 18, 2019
1 / 8
L2WCP160 Series
*Near Field Communication controller
*Product images are for illustrative purposes
only and may vary from actual design.
◼ Features
• Power Rating: 160W
• Input Voltage: 120-277Vac
• Constant current and constant voltage hybrid output
• Output current (450mA-6670mA)
• Output current programmable with Near Field
Communication controller
• Efficiency to 94%
• Compatible with 0-10V, PWM, Timer, Dim-to-off option,
12V/200mA AUX
• UL, Type HL, Type TL
• Lightning, OVP, SCP, OTP, & Over Current Protection
• IP67
• 5-year warranty
• Surge Protection: Diff: 6kV, Common: 10kV
◼ Application
• Indoor and outdoor applications
◼ Model List*(See part number scheme for model number details)
(Add-J for J-Box, Ex.) L2WCP160SXXXST-J-XYZ; Contact Autec Sales for all options.)
Ordering options
XY= Programmable
Z=Dimming
FC=Near Field Communication
D=DALI Dimming
B=BLE Dimming
◼ Technical Data
Input voltage range
120-277Vac
Frequency
47-63Hz
Power factor
> 0.99 @115Vac & 80~100% Full load, > 0.97 @230Vac & 80~100% Full load
Output voltage
24-233V
Output power
160W
Ripple and Noise
2.5%Vo
Model Number
Input
Voltage
Range
Output
Power
Output
Voltage
Output
Current
Min.
Output
Current
Max.
Efficiency
110V/220V
Certification
L2WCP160S667ST-XYZ
120-277Vac
160W
24-36V
2670mA
6670mA
89%/91%
UL/cUL
L2WCP160S444ST-XYZ
120-277Vac
160W
36-48V
1770mA
4440mA
90%/92%
UL/cUL
L2WCP160S333ST-XYZ
120-277Vac
160W
48-80V
1330mA
3330mA
92%/93%
UL/cUL
L2WCP160S200ST-XYZ
120-277Vac
160W
80-140V
800mA
2000mA
92%/94%
UL/cUL
L2WCP160S114ST-XYZ
120-277Vac
160W
140-233V
450mA
1140mA
91%/93%
UL/cUL
160W, 120-277Vac Input, Programmable Constant Power LED Driver
Technical Sales / Customer Service: +1-818-338-7788 • Email: sales@autec.com
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA • www.autec.com
September 18, 2019
2 / 8
L2WCP160 Series
◼ Technical Data(cont.)
Max input current
1.56A @115Vac, 0.76A@230Vac
Max input Power
160W
Efficiency
89-94%
Line Regulation
±0.3%
Load Regulation
±1.2%
Inrush Current
65A @230Vac cold start +25℃
Dimming
0~10V/ PWM/ Timer, Dim-to-off option
THD
< 20%
Current Programmable
Yes
Output Current
Programmable Range
450-6670mA
Over Current Protection
Protection type: Constant current limiting, recovers automatically after fault
condition is removed
Short Current Protection
Hiccup mode, recovers automatically after fault condition is removed
Over Voltage Protection
1.3Vo，Protection type: Hiccup mode, recovers automatically after fault condition is
removed
Over Temp. Protection
Hiccup mode, recovers automatically after fault condition is removed
Operating Temperature
-35~+70˚C
Max T-case Temp.
83˚C
Operating Humidity
10 ~ 100% RH non-condensing
Storage Temp., Humidity
-40 ~+85℃, 5 ~ 100% RH
Temp. Coefficient
±0.05%℃ (0~50℃)
Vibration
10~500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
Dimensions
196x70x37mm 7.7x2.75x1.26 in
Packing
25pcs/carton
Weight
832.6g
◼ Safety Compliance
Safety Standards
UL8750, UL935, UL1012, CSA-C22.2 No.107.1, EN61347-1, EN61347-2-13
Withstand Voltage
I/P – O/P: 3.75kVAC
Isolation Resistance
I/P – O/P: 100M Ohms / 500VDC /25℃ / 70% RH
EMC Emission
Compliance to EN55015, EN61000-3-2 Class C (≥60% load); EN61000-3-3
EMC Immunity
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024
Disclaimer:
Autec Power Systems’ (Autec) LED Drivers are Hi-Pot tested during the manufacturing process. Autec assumes no responsibility for
secondary Hi-Pot testing at customer location or designated production line(s). Should customer require further Hi-Pot testing, at
their own production line, following assembly of the LED Driver into the customer’s assembled fixture, Autec requests advance
notice. This request must be communicated to Autec in a timely manner and is recommended to be requested at time of issuing
each purchase order.
160W, 120-277Vac Input, Programmable Constant Power LED Driver
Technical Sales / Customer Service: +1-818-338-7788 • Email: sales@autec.com
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA • www.autec.com
September 18, 2019
3 / 8
L2WCP160 Series
◼ Derating curve
◼ Static Characteristics
◼ Power Factor vs. Output
160W, 120-277Vac Input, Programmable Constant Power LED Driver
Technical Sales / Customer Service: +1-818-338-7788 • Email: sales@autec.com
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA • www.autec.com
September 18, 2019
4 / 8
L2WCP160 Series
◼ THD vs. Output
◼ Efficiency vs Output
◼ Lifetime vs Case Temp.
160W, 120-277Vac Input, Programmable Constant Power LED Driver
Technical Sales / Customer Service: +1-818-338-7788 • Email: sales@autec.com
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA • www.autec.com
September 18, 2019
5 / 8
L2WCP160 Series
◼ Near Field Communication Controller
◼ Dimming
0-10V Analog Dimming &PWM Dimming
GND
Grey
Dimming wire
0-10V&PWM
Purple
12V AUX
Yellow
Input Dimming Voltage
0-10V
DIM+ Source Current
0-1mA
12V AUX Source Current
200mA
PWM Frequency Range
0.5-3KHZ
PWM high level
10V
NOTE:
1. Io is actual output current and Ir is rated current without
dimming control.
2. For the driver to operate properly, the load voltage
must be in the working voltage range.
3. We have DIM-TO-OFF option, which can be
programmed by the programmer.
4. Maximum input voltage for the dimming wire is 12V.
5. AUX wire is only for source, can’t connect to other
voltage source.
NOTE:
1. The Near Field Communication controller can program the output current,
voltage and timer delays.
2. The Near Field Communication programming is a non-contact process, therefore
much safer compared to traditional programming methods.
3. Power devices can be programmed without AC power applied to the driver.
4.
-10.00%
10.00%
30.00%
50.00%
70.00%
90.00%
110.00%
0 2 4 6 8 10
NON-DIM-TO-OFF
-10.00%
10.00%
30.00%
50.00%
70.00%
90.00%
110.00%
0246810
DIM-TO-OFF
160W, 120-277Vac Input, Programmable Constant Power LED Driver
Technical Sales / Customer Service: +1-818-338-7788 • Email: sales@autec.com
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA • www.autec.com
September 18, 2019
6 / 8
L2WCP160 Series
NOTE:
1. The dimming time can be programmed by the programmer.
2. The time of t1 and t2 can be set by the programmer.(0.5h
step)
3. The value of I1 and I2 can be set by the programmer.
4. Changing the current from I1 to I2 may take a few min.
PWM Dimming
TIMER Dimming
◼ Mechanical Design
RED(V+)
BLACK(V-)
PURPLE(Dim+)
GREY(Dim-)
YELLOW(12V Aux)
BLACK(ACL)
WHITE(ACN)
GREEN(GND)
160W, 120-277Vac Input, Programmable Constant Power LED Driver
Technical Sales / Customer Service: +1-818-338-7788 • Email: sales@autec.com
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA • www.autec.com
September 18, 2019
7 / 8
L2WCP160 Series
◼ Mechanical Design J-Box
T=Class I, 3 Wire Input
Part Number Scheme
L2 W C P 160 S XXX S T-XYZ
L2=LED Driver Series
C=Constant Power
P=Programmable
S=Single Output
160=Output Power(Watts)
W=Input Voltage 120-277Vac
XXX=Rated Current
Ex.) 114=1140mA
667=6670mA
S=Metal case
-XYZ=Programming
and dimming
options. *See
ordering options
table on page 1.
160W, 120-277Vac Input, Programmable Constant Power LED Driver
Technical Sales / Customer Service: +1-818-338-7788 • Email: sales@autec.com
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA • www.autec.com
September 18, 2019
8 / 8
L2WCP160 Series
*Product images are for illustrative purposes only and may vary from actual design.
*Specifications are subject to change without notice. Autec is not responsible for issues arising from errors or
omissions.
T=Class I, 3 Wire Input
Part Number Scheme
L2 W C P 160 S XXX S T -J-XYZ
L2=LED Driver Series
C=Constant Power
P=Programmable
S=Single Output
160=Output Power(Watts)
W=Input Voltage 120-277Vac
XXX=Rated Current
Ex.) 114=1140mA
667=6670mA
S=Metal case
-J=J-Box
-XYZ=Programming
and dimming
options. *See
ordering options
table on page 1.
