TMD-55W - Amprobe - Datasheet.Directory

Users Manual

• Mode d’emploi

• Bedienungshandbuch

• Manual d’Uso

• Manual de uso

TMD-55 / TMD-55W

Multilogger Thermometer

/ Wireless Download

TMD-56

Multilogger Thermometer

with USB Download

TMD-55 / TMD-55W

Multilogger Thermometer

/ Wireless Download

TMD-56

Multilogger Thermometer

with USB Download

Users Manual

June 2010, Rev.1

English

Limited Warranty and Limitation of Liability

Your Amprobe product will be free from defects in material and

workmanship for 1 year from the date of purchase. This warranty

does not cover fuses, disposable batteries or damage from accident,

neglect, misuse, alteration, contamination, or abnormal conditions

of operation or handling. Resellers are not authorized to extend

any other warranty on Amprobe’s behalf. To obtain service during

the warranty period, return the product with proof of purchase

to an authorized Amprobe Test Tools Service Center or to an

Amprobe dealer or distributor. See Repair Section for details. THIS

WARRANTY IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES -

WHETHER EXPRESS, IMPLIED OR STAUTORY - INCLUDING IMPLIED

WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR

MERCHANTABILITY, ARE HEREBY DISCLAIMED. MANUFACTURER

SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL

OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY

CAUSE OR THEORY. Since some states or countries do not allow the

exclusion or limitation of an implied warranty or of incidental or

consequential damages, this limitation of liability may not apply

to you.

Repair

All test tools returned for warranty or non-warranty repair or

for calibration should be accompanied by the following: your

name, company’s name, address, telephone number, and proof of

purchase. Additionally, please include a brief description of the

problem or the service requested and include the test leads with

the meter. Non-warranty repair or replacement charges should be

remitted in the form of a check, a money order, credit card with

expiration date, or a purchase order made payable to Amprobe®

Test Tools.

In-Warranty Repairs and Replacement – All Countries

Please read the warranty statement and check your battery before

requesting repair. During the warranty period any defective test

tool can be returned to your Amprobe® Test Tools distributor for

an exchange for the same or like product. Please check the “Where

to Buy” section on www.amprobe.com for a list of distributors near

you. Additionally, in the United States and Canada In-Warranty

repair and replacement units can also be sent to a Amprobe® Test

Tools Service Center (see address below).

Non-Warranty Repairs and Replacement – US and Canada

Non-warranty repairs in the United States and Canada should be

sent to a Amprobe® Test Tools Service Center. Call Amprobe® Test

Tools or inquire at your point of purchase for current repair and

replacement rates.

In USA In Canada

Amprobe Test Tools Amprobe Test Tools

Everett, WA 98203 Mississauga, ON L4Z 1X9

Tel: 877-AMPROBE (267-7623) Tel: 905-890-7600

Non-Warranty Repairs and Replacement – Europe

European non-warranty units can be replaced by your Amprobe®

Test Tools distributor for a nominalv charge. Please check the

“Where to Buy” section on www.amprobe.com for a list of

distributors near you.

European Correspondence Address*

Amprobe® Test Tools Europe

In den Engematten 14

79286 Glottertal, Germany

Tel.: +49 (0) 7684 8009 - 0

*(Correspondence only – no repair or replacement available from

this address. European customers please contact your distributor.)

TMD-55

T1 T2

Multilogger Thermometer

with Wireless Download

Multilogger Thermometer

TMD-55 / TMD-55W / TMD-56

1210

1) “ ” Power Button

2) “°C /°F/[LIMITS]”Button

3) “[INVT]/ ”Button

4) “SAVE/READ”Button

5) “LOG/READ”Button

6) “CLR ?/SET [ ]”Button

7) “REL/HOLD”Mode

8) “APO/MAX/MIN”Button

9) “SHIFT/[OFS]” Button

10) “TYPE/T1/T2” Button

11) “TYPE/T1/T2” Button

12) “[TIME]/T1-T2” Button

13) LCD Display

14) T1/T2 Input

TMD-55W

Third

Display

Second

Display

Main

Display

10 11

1)Main display

1.1)Degrees °C / °F

1.2)Type of T/C

thermocouple

1.3)T1 or T2

temperature

2)Second display

2.1)Degrees °C / °F

2.2)Type of T/C

thermocouple

2.3)T1 or T2

temperature

3)Third display

3.1)Degrees °C / °F

3.2)Time or Date display

3.3)T1-T2 differential

Screen Display

4)MAX/MIN reading

5)Relative mode

6)Hi/Lo Limits

comparative mode

7)Data SAVE/LOG and READ

mode

8)Shift mode

9)Low BATT display

10)Auto power off

11)Main display

DataHOLD mode

12)Wireless Mode

(TMD-55W)

13)Commutation mode

14)SET mode

2.12.2

32 7

2.3 3.3

1.3

3.1

1.1

3.2

1.2

CONTENTS

SYMBOLS ..........................................................................3

UNPACKING AND INSPECTION ........................................ 5

INTRODUCTION ................................................................ 5

Features ........................................................................ 5

OPERATION INSTRUCTIONS ............................................. 7

Operational Mode .......................................................7

Normal Mode ............................................................. 7

Shift Mode ................................................................. 7

Setup Mode ...............................................................8

Wireless Mode (For TMD-55W) ................................. 8

To check the channel and ID of the mete ................8

Normal Mode ............................................................. 8

““ Power Button .................................................... 8

“[LIMITS]” Button ...................................................... 8

“” Button ...............................................................9

“SAVE/READ” Button ................................................ 9

“LOG/READ” Button .................................................. 9

“HOLD” Mode ........................................................... 10

“MAX/MIN” with Time record mode .......................10

“T1/T2” Button (Main display) .................................. 11

“T1/T2” Button (Second display) .............................. 11

“[TIME]/T1-T2” Button (Third display)......................11

Shift Mode .................................................................... 11

“°C/°F” Button ........................................................... 11

“SAVE” Button ...........................................................12

“LOG” Button ............................................................ 12

“CLR ?” Button .......................................................... 13

“REL” Button ............................................................. 13

“APO” Button ............................................................ 13

“TYPE” Button (Main display) .................................. 13

“TYPE” Button (Second display) ............................... 14

Setup Mode ...............................................................14

“[LIMITS]” Button ...................................................... 14

“[INVT]” Button ......................................................... 14

“APO” Button ............................................................ 15

“[OFS]” Button ..........................................................15

“[TIME]” Button ........................................................15

Error messages .............................................................15

SPECIFICATION ..................................................................16

MAINTENANCE ................................................................. 19

SYMBOLS

Caution! Refer to the explanation in this Manual

Complies with European Directives

Tested Comply With FCC Standards

Do not dispose of this product as unsorted

municipal waste.



WARNING and PRECAUTIONS

• To avoid electrical shock, do not use this instrument

when working voltages at the measurement surface

over 24V AC or DC.

• To avoid damage or burns, do not make

temperature measurement in microwave ovens.

• Repeated sharp exing can break the thermocouple

leads. To prolong lead life, avoid sharp bends in the

leads, especially near the connector.

Federal Communications Commission

The devices TMD-55W are complied with Part 15 of the

FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received,including interference that may cause undesired

operation.

Note

The equipments TMD-55W have been tested and found

to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection. This equipment generates, uses and can

radiated radio frequency energy and, if not installed

and used in accordance with the instructions, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation if this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.- Increase

the separation between the equipment and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for help.

Shielded interface cables must be used in order to comply

with emission limits.

Changes or modiﬁcations not expressly approved by the

party responsible for compliance could void the user’s

authority to operate the equipment.

Wireless Note

Wireless receiver must keep a distance at least 40cm from

the meter and meter to meter distance must be at least

30cm.

UNPACKING AND INSPECTION

Your shipping carton should include:

1 Meter

1 Manual

1 USB Cable (TMD-56)

1 Software CD ROM (TMD-56 / TMD-55W)

4 AAA Batteries

2 K type Thermocouple

1 Plain white box

If any of the items are damaged or missing, return

the complete package to the place of purchase for an

exchange.

INTRODUCTION

TThe instrument is a portable digital thermometer that

measures external thermocouples of type K, J, R, S, T, E,

N. The thermocouples types comply with the N.I.S.T. – ITS

90 standard reference temperature/voltage tables. The

thermometer features a dual thermocouple input and an

adjustable T/C offset.

Features

TMD-55 and TMD-55W

• Wireless two ways transmission. (TMD-55W only)

• Dual input function.

• Basic accuracy: 0.05%

• 2 Channel Temperature Measuring:

T1, T2 for various thermocouples.

• Triple displays with set-able backlight:

MAIN display for T1, T2.

SECOND display for T1, T2.

THIRD display for T1- T2, TIME.

DATA LOGGER function

• Data logger capacity:

Save data: 128 samples with read-time data.

Data logger: 16 sets, Maximum 1024 data capacity.

Easy Reads Data with down and up key on meter.

• T/C Offset Adjust.

• REC, MAX, MIN, MAX-MIN, AVG, REL, HOLD

functions.

• T1, T2, T1-T2, Time and Memory No.

• Resolution 0.1°C/1°C, 0.1°F/1°F.

• Warning beeper with Hi/Lo setting.

• TIME, Record interval, APO time setting.

• Real time clock with calendar.

• Selectable Auto Power Off function.

TMD-56

• USB Port provides excellent user interface.

• DC 12V adapter.

• Basic accuracy: 0.05%.

• Dual inputs with K/J/E/T/R/S/N thermocouple.

• Triple display with settable backlight.

• Real time clock and calendar.

• Data logger capacity:

Save data: 256 samples with real time data.

Data logger: 16 sets, Max 16000 data capacity.

Easy read data with uP/down keys.

• Selectable Auto Power Off function.

• Warning beeper with Hi/Lo setting.

• MAX/MIN/AVG/REL/HOLD function.

• MAIN display for T1/T2.

• SECOND display for T1/T2.

• THIRD display for T1-T2, with real time clock and

calendar.

Model Difference:

Model Memories Wireless USB DC IN

TMD-55 Save 128,

Log 1024

X X X

TMD-56 Save 256,

Log 16000

X V V

TMD-55W Save 128,

Log 1024

V X X

OPERATING INSTRUCTIONS

Operational Mode

There are three operation modes-Normal, Shift, and

Setup Mode.

Normal Mode

This is the default mode, the operating functions for the

normal mode are printed on the top of each button in

white.

Shift Mode

The operating functions for the shift mode are printed

in white on the buttons. While in the normal mode,

press the “SHIFT” button to switch to shift mode. At

the lower-right corner of the display, the word “Shift”

is displayed to indicate shift mode. To switch back to

normal mode, press the “SHIFT” button again.

Setup Mode

Press the “SET[ ]” button in normal mode to switch to

setup mode, the indicator “SET” is shown on the left

side of the display. To switch back to normal mode, press

“SET[ ]” button.

Wireless Mode

Press the “ ” key for more than two seconds to start

wireless function. Press the “ ” key again for another

two seconds to stop wireless function. The wireless mode

will shut down if there is no wireless signal for two

minutes.

To SET CH/ID to 00,00, by pressing “T1-T2” key and “

” power key for more than 6 seconds with the meter

powered down. The meter will set channel and ID to

00,00 status. The second display will show 00, which

means that the channel and ID has been set to 00.

To check the channel and ID of the meter

When the meter is off press “ ” key and “ ” for 5

seconds, LCD’s main display will show channel number,

the second display will show ID number.

Normal Mode

The following functions can only be used in the normal

mode.

“ ” Power Button

The “ ” key turns the thermometer on or off. When

enter data REC mode, the power off function is disabled.

“[LIMITS]” Button (only Main display)

The limits function will alert the user when a

measurement exceeds a speciﬁed limit. To set the limit

values, refer to limits function in the setup mode. Press

the “[LIMITS]” button to activate the limits function; the

word “LIMIT” should be displayed on the LCD.

When the value of the main display exceeds the Hi limit,

the word “Hi” will be displayed and the thermometer will

beep in a pulsed tone. If the value of the main display is

lower then the Lo limit, the word “Lo” will be displayed

and the thermometer will beep in a continuous tone. To

exit the limits function, press the “[LIMITS]” button.

“ ” Button

The backlight function is represented by this button “ ”.

Pressing the button will turn on or off the LCD backlight.

The backlight will turn off automatically after.

“SAVE/READ” Button

The read data function works in conjunction with the

save function in the shift mode, it is used for reading

saved data. The save function can be activated in shift

mode. Press the “SAVE/READ” button to read saved

data; the word “READ” should be displayed on the

LCD. To navigate around the save data table, press the

overlay “SECOND” button until the “#” sign is displayed

on the second display. The location of the read pointer

within the saved data table will be displayed. The arrow

buttons on the overlay are used for scrolling through the

saved data. Press the smaller arrows “p” or “q” to step

through the data one at a time. Press the larger arrows

“p” or “q” to step through the data ten at a time.

Pressing the overlay “ESC” button deactivates the read

data function.

“LOG/READ” Button

The read log function works in conjunction with the

log function. It is used for reading logged data. The log

function can be activated in the shift mode. Press the

“LOG/READ” button to activate the log read function; the

word “READ” is displayed on the LCD. Press the overlay

“SECOND” button to rotate through following display

menus: T1, T2, GRP, and #. T1 and T2: Displays the T1 or

T2 saved data. GRP:Displays the current group number. #:

Displays the current location of the read pointer within

a selected group. The arrow buttons on the overlay are

used for scrolling through the data and groups. Press the

smaller arrows “p” or “q” to step through the logged

data or groups one at a time. Press the larger arrows “p”

or “q” to step through the data or groups ten at a time.

To navigate the logged data and groups, press the overlay

“SECOND” button until GRP appears in the second display

panel. Then select the group using the arrows. Press the

“SECOND” button again until the “#” sign is displayed.

The location of the read pointer in the selected group will

be displayed. Use the arrows to scroll through the data.

Pressing the overlay “ESC” button deactivates the read

data function.

“HOLD Mode” (only Main display)

When HOLD mode is selected, the thermometer holds the

present readings and stops all further measurements. To

activate the data hold mode, press the “HOLD” key, and

“HOLD” is displayed on the LCD. Pressing the “HOLD”

key again cancels the function, and the instrument will

automatically resume measurements.

“MAX/MIN” with Time record mode (only Main display)

The “MAX/MIN” function records the highest and lowest

value recorded, and it calculates the average reading, and

the differences of MAX to MIN. Press “MAX/MIN” key to

enter the MAX/MIN recording mode. The beeper emits a

tone when a new minimum or maximum measurement

is recorded. Press the “MAX/MIN” key again to rotate

through the current readings: MAX: The highest

measurement recorded. MIN: The lowest measurement

recorded. MAX-MIN: The difference of the highest and

the lowest measurement. AVG: The average values of the

measurements.

This mode works in conjunction with the hold function,

pressing the “HOLD” key will stop the recording and

measurements (Previously recorded readings are not

erased). Press “HOLD” key again to resume recording

and measurements. To prevent accidental loss of MIN,

MAX and AVG data, the MAX/MIN function can only be

cancelled by pressing and holding down the “MAX/MIN”

key for more then 2 seconds. The automatic power-off

feature, and the power, “°C/°F”, “REL”, “SET”, “Hi/Lo

LIMITS”, “TYPE”, “T1/T2” keys are also disabled.

“T1/T2” Button (Main display)

The input selection button “T1/T2” selects the input for

the main display, T1 thermocouple or T2 thermocouple.

Press the “T1/T2” button to switch between the two

inputs. When meter is turned on, it is set to the display

that was last in use.

“T1/T2” Button (Second display)

The input selection button “T1/T2” selects the input for

the second display, T1 thermocouple or T2 thermocouple.

Press the “T1/T2” button to switch between the two

inputs. When meter is turned on, it is set to the display

that was last in use.

“[TIME]/T1-T2” Button (Third display)

The input selection button “T1-T2” selects the system

time and date, or the differential between the two

thermocouples (T1-T2) for the third display. Press the “T1-

T2” button to switch the display options. When meter is

turned on, it is set to the display that was last in use.

Shift Mode

The following functions can only be used in the shift

mode.

“°C/°F” Button

Press the “°C/°F” key to select the temperature scale,

readings can be displayed in Celsius (°C) or Fahrenheit

(°F). When the thermometer is turned on, it is set to the

temperature scale that was last in use.

“SAVE” Button (TMD-56 except)

The save function stores the T1, T2 data in a nonvolatile

memory. Press the “SAVE” button to save the current

data, the word SAVE is displayed to indicate the data

has been saved. The built in memory can store up to 128

data. The data can be read using the read function in the

normal mode.

“SAVE” Button (TMD-56)

The save function stores the T1, T2 data in a nonvolatile

memory. Press the “SAVE” button to save the current

data, the word SAVE is displayed to indicate the data

has been saved. The built in memory can store up to 256

data. The data can be read using the read function in the

normal mode.

“LOG” Button (TMD-56 except)

The data log function continuously records the data

according to a speciﬁed time interval. The time interval

can be set using the interval setup function [INVT] in

the set up mode. Press the “LOG” button to activate the

log function; the indicators “LOG” and “MEM” will be

displayed on the LCD. There are 16 groups that are used

for storing the log data, and each group uses 64 data

slots. If the current log session exceeds 64 data points,

the log function will automatically use the next group to

store the following data. A maximum of 1024 data points

can be saved in one log session. Press the “LOG” button

again to exit the data log function.

“LOG” Button (TMD-56)

The data log function continuously records the data

according to a speciﬁed timeinterval. The time interval

can be set using the interval space setup function [INVT]

in theset up mode. Press the “LOG” button to activate

the log space function; the indicators “LOG” and “MEM”

will be displayed on the LCD. There are 16 groups that are

used for storing the log data. A maximum of 16,000 data

point can be saved in one log session. Press the “LOG”

button again to exit the data log function.

“CLR ?” Button

The CLR function clears all the saved and logged data in

memory. When the “CLR” button is pressed, indicator

“MEM” is displayed and the “CLR” on upper-right of LCD

will blink. Pressing the “ENTER” button printed on the

overlay in white will clear all saved and logged data. Press

“ESC” button to exit this function without clearing data.

“REL” Button (Main display)

The relative value function can be used for comparing the

saved reference value with other measurements. Press the

“REL” button to store the current measurement as the

reference value, and “REL” should be displayed on the

right part of the LCD. The next measurement will display

the current value compared to the reference value. Press

“REL” button again to clear the reference value and

deactivate the relative value measurement function.

“APO” Button

Press the “APO” button to turn the “Auto power off”

function on or off. When this function is enabled, the

indicator “APO” is shown at the upper left part of the

LCD.When APO (Auto power off) is enabled, it will

automatically turn the thermometer off no button is

pressed for a period longer than the set time interval (the

default time for APO is 5 minutes). Press power button to

resume operation.

“TYPE” Button (Main display)

Press this key to change the type of thermocouple in the

main display (K/J/T/E/R/S/N). If the inputs of the main and

second display are the same, then pressing this key will

change the thermocouple type for both displays.

“TYPE” Button (Second display)

Press this key to change the type of thermocouple in the

second display (K/J/T/E/R/S/N). If the inputs of the main

and second display are the same, then pressing this key

will change the thermocouple type for both displays.

Setup Mode

The following functions can only be use in the setup

mode.

“[LIMITS]” Button (Hi/Lo limit setting)

Press the “LIMITS” button to enter the Hi/Lo limit setup

function. The words “LIMIT” and “Hi” will be ﬂash on the

LCD along with the previous value for the Hi limit.

Enter the new Hi limit value using the number keys

printed in white on the overlay.The resolution of Hi/Lo

limit setup is 1 count. The “-” button (same button as

the ESC) can be used to enter negative values. Press the

“ENTER” button to conﬁrm the new limit. You will then

be prompted to enter a new Lo limit value. Enter the new

value and then press enter to ﬁnish setup of limits.

“[INVT]” Button (Interval time setting)

To setup the time interval for the log function, press

the “[INVT]” button. The indicator “INV” will blink on

the top-right of the LCD and the previous interval is

displayed. Press the number buttons printed in white

on the overlay to change the time interval. Setting is

from left to right of the following format (HH:MM:SS).

Press the overlay “ENTER” button to conﬁrm. To exit this

function, press the ESC button.

HH: interval Hour (0~23)

MM: interval Minute (0~59)

SS: interval Second (0~59)

MAX: 23:59:59

MIN: 00:00:01

“APO” Button (Auto power off time setting, min. 1

minute)

Use this function to change the time for the auto power

off (APO) function. Press the “APO” button in setup

mode, and the indicator “APO” and the current time will

ﬂash on the LCD. The default time for APO is 5 minutes.

Press the number button printed in white on the overlay

to set the APO time. Press the overlay “ENTER” button

to conﬁrm. To exit this function without changing the

setting, press the “ESC” button.

MAX: 19999 minutes

MIN: 0001 minutes

“[OFS]” Button (Thermocouple offset adjust)

When the main display input is T1 and a thermocouple

is connected, the instrument can adjust the offset of the

thermocouple. The same can be done for T2 when on

the main display. In the setup mode, press this button to

enter the thermocouple Offset Setup Function (OFS) and

the indicator CAL should be displayed on the top-right

of the LCD and the current setting is also shown. Press

the number buttons printed in white on the overlay to

change the offset of the thermocouple. The resolution

of the setup is 0.1°. Press the “-” button to set a negative

value. Press the overlay “ENTER” button to conﬁrm. MAX:

±1999.9 °C/°F.

“[TIME]” Button (System time setting)

To set the system time, press the “[TIME]” button in the

setup mode. The third display should show the current

date and time with the year ﬂashing. Enter the new value

from left to right in the following format YY:MM:DD and

HH:MM:SS. Press the number buttons printed in white

on the overlay to set the system date and time. Press the

“ENTER” button to conﬁrm. Exit this function by pressing

“ESC” button.

Error messages

When the meter appears wrong messages such as Err-01,

Err-02 and Err-03.

Err-01: In the “SAVE” mode, if memory is full, the lower

right display will show Err-01. If you would like

to record the new value. Please clear all old

records.

Err-02: In the “LOG” mode, if memory is full, the lower

right display will show Err-02. If you would like

to record the new value. Please clear all old

records.

Err-03: In the “READ LOG” and “READ SAVE” mode,

when the main display shows 6208 and the

lower right display shows “OL, Err-03”. Which

means that there might appear two situations:

1. There is no data in the memory.

2. The memory is full, and the meter will warn

the user this is the last sample.

SPECIFICATION

Electrical

Temperature Scale: Celsius or Fahrenheit user-selectable

Measurement Range:

Thermocouple

Type

Range

K-TYPE (0.1°) -200°C to 1372°C (-328°F to 2501°F)

J-TYPE (0.1°) -210°C to 1200°C (-346°F to 2192°F)

T-TYPE (0.1°) -200°C to 400°C (-328°F to 752°F)

E-TYPE (0.1°) -210°C to 1000°C (-346°F to 1832°F)

R-TYPE (1°) 0°C to 1767°C (32°F to 3212°F)

S-TYPE (1°) 0°C to 1767°C ( 32°F to 3212°F)

N-TYPE (0.1°) -50°C to 1300°C ( -58°F to 2372°F)

*Based on the ITS-90 temperature standard.

According to temperature standard ITS-90.

Accuracy:

K/J/T/E-TYPE

±(0.05% rdg + 0.3°C) -50°C to 1372°C

±(0.05% rdg + 0.7°C) -50°C to -210°C

±(0.05% rdg + 0.6°F) -58°F to 2501°F

±(0.05% rdg + 1.4°F) -58°F to -346°F

N-TYPE

±(0.05% rdg + 0.8°C) -50°C to 0°C

±(0.05% rdg + 0.4°C) 0°C to 1300°C

±(0.05% rdg + 1.6°F) -58°F to 32°F

±(0.05% rdg + 0.8°F) 32°F to 2372°F

R/S-TYPE

±(0.05% rdg + 2°C) 0°C to 1767°C

±(0.05% rdg + 4°F) 32°F to 3212°F

Temperature

Coefficient

0.1 times the applicable accuracy

specification per °C from 0°C to18°C

and 28°C to 50°C (32°F to 64°F and

82°F to 122°F).

Input Protection 24V dc or 24V ac rms maximum input

Voltage on any combination of input

pins.

Environmental

Ambient

Operating

Ranges

0°C to 50°C (32°F to 122°F) <80% R.H.

Storage

Temperature

-20°C to 60°C (-4°F to 140°F) <70% R.H.

General

Display Main, Second, Third: The Main and

Second display panels are

4 ½ digit liquid crystal display (LCD)

with maximum reading

of 19999, these panels are used for is

playing the value of

T1 or T2. The Third panel displays the

date, time, or the

difference value of T1 to T2. When

the input measurement is

overloaded, the following is displayed

“----.-”.

Overload “----.-” or “OL” is display..

Battery 4 X 1.5V AAA

Battery Life 120 hours typical with carbon zinc

battery.

External Power

(TMD-56)

* Not included in

the packaging

DC IN: 12Vdc, 150mA (TMD-56)

Polarity:

DC Jack Size:

Inner diameter 1.35 +/- 0.1 mm

Outer diameter 3.50 +/- 0.1 mm

Reading Rate 2.5 time per second.

Dimensions 160 mm (H) x 83 mm (W) x 38 mm (D);

6.3 in (H) x 3.3 in (W) x 1.5 in (D).

Weight Approx. 365g (0.8lb) including

batteries.

Supplied Wire 4 feet type “K” thermocouple

bead wire (Teﬂon tape insulated).

Maximum insulation temperature

260°C (500°F).

Wire accuracy ±2.2°C or ±0.75% of

reading (whichever is greater) from

0°C to 800°C (32 °F to 1472°F).

Wire

Communication

Protocol

19200 baud rate. (TMD-56)

Wireless Features

Frequency range 910~920MHz (TMD-55W)

Low current consumption less than 1mA.

The transmitting distance can reach 25M without

magnetic interference.

 - EMC: Conforms to EN61326-1.

This product complies with requirements of the

following European Community Directives: 89/ 336/

EEC (Electromagnetic Compatibility) and 73/ 23/ EEC

(Low Voltage) as amended by 93/ 68/ EEC (CE Marking).

However, electrical noise or intense electromagnetic

ﬁelds in the vicinity of the equipment may disturb the

measurement circuit. Measuring instruments will also

respond to unwanted signals that may be present within

the measurement circuit. Users should exercise care and

take appropriate precautions to avoid misleading results

when making measurements in the presence of electronic

interference.

MAINTENANCE AND REPAIR

WARNING

To avoid possible electrical shock, disconnect the

thermocouple connectors from the thermometer

before removing the cover.

Installing and Replacing Battery

A. Screw

B. Battery Cover

C. Battery

1. Power is supplied by 4pcs 1.5V (SIZE AAA) UM-4 R03.

2. The “ ” appears on the LCD display when

replacement is needed. To replace battery remove

screw from back of meter and lift off the battery

cover.

3. Remove the batteries from the battery

compartment and replace them with new ones.

4. When not use for long time, remove the battery.

5. Do not store the unit in place with temperature

and humidity beyond the recommended storage

temperature.

Cleaning

Periodically wipe the case with a damp cloth and

detergent, do not use abrasives or solvents.