Amphenol Circular Interconnects MIL-C-38999 Series II JT Series Bayonet Coupled Crimp Circular Connectors Features Specifications * Lightweight Space-saving design * Durability - 500 cycles * EMI Shielded Optional Operating Temperature Current Rating Contact Size 20 Contact Size 16 Voltage Rating (sea level) Service Rating I Service Rating II Customer Options Shell sizes Contact arrangements Circuit sizes -9 - 100+ - 1 to 128 Tooling - -55C up to 200C - 7.5A - 13A Related Information Detailed catalogue - 12-090-14 Solder, PCB, Wire Wrap, Coax, Fiber & Filter optional JT XX XX-XX-X X X (X) CONNECTOR TYPE JT: Standard Mil-C-38999 II JTS: High Temperature JTN: Chemical & Fuel Resistant DEVIATIONS Finish Suffix Cadmium Plated Ni Base Olive Drab Cadmium Plated, Ni Base Electroless Ni Anodic Coating (Alumilite) Chromate treated (Iridite 14-2) SHELL STYLE 00: Wall Mount Receptacle 01: Line Receptacle 02: Box Mount Receptacle 06: Straight Plug 07: Jam-Nut Receptacle 08: 90 Plug (AAO) I: Solder Mount Rec. (Hermetic only) W/SR Suffix (SR) (014) (386) (023) (005) (424) (300) (011) (344) ALTERNATE KEYING Blank: Normal Position See detailed catalogue for variations CONTACT STYLE P: Pins S: Sockets SERVICE CLASS RP: Potting Boot + Grommet RE: Environmental Sealed Can add SR RT: Environmental w/o rear Accessory Y: Hermetically Sealed A: Fixed Solder Contacts (LTD only) (page D-12 and D-13) SHELL SIZE See Insert Arrangement Table (page D-12 and D-13) JT Accessories - Cable Clamp for Crimp type Housing (if ordered separately to connector) Part Number System: Finish (-XX9 standard) Diagram Chromate Treat -XX0 10-405982-XXX Anodic Coating Cadmium Plated Nickel Base Olive Drab, Cadmium, Nickel Base Electroless Nickel Part Number Make-up JT00... JTS00... JTN00... Wall Mount Receptacle Part Number Make-up JT01... JTS01... JTN01... Line Receptacle Part Number Make-up JT02RE... JTS02RE... JTN02RE... Cannot add SR Box Mount Receptacle INSERT ARRANGEMENTS See Insert Arrangement Table For Cadmium-free Zinc Cobalt plating consult representative SR = Strain Relief FINISH See adjacent table - M22520/1-01 - M22520/1-04 - M81969/14-03** - M81969/14-10*** * Plastic Tool ** For Size 16 Contacts. *** For Size 20 Contacts - 600VAC(rms) - 900VAC(rms) Part Number System: (refer to Part Number Make-up for assistance - opposite) SHELL SIZE 8/10/12/14/16/18/20/22/24 Crimp Tool Positioner Insert/Remove* Insert/Remove* -XX5 -XX7 -XX9 -XXG Part Number Make-up JT07... JTS07... JTN07... Jam Nut Receptacle Part Number Make-up JT06... JTS06... JTN06... Straight Plug MS Part Numbering System JT Accessories - Heat Shrinkable Backshells (shielded) Type Olive Drab Cadmium Shielded Backshell Configuration (-X) -1 -2 -3 Right Angle Finish 45 ABK A-WAR-X ABK A-WBR-X ABK A-WCR-X ABK A-WDR-X ABK A-WER-X ABK A-WFR-X ABK A-WGR-X ABK A-WHR-X ABK A-WJR-X Shell Size 8 10 12 14 16 18 20 22 24 Straight Part Number: Diagram Alternatives: Unshielded Replace R with U, Electroless Nickel replace W with F. JT Accessories - Caps Part Numbers: Shell Size Cap & Chain for Plugs Cadmium Plate, Ni Base 8 10 12 14 16 18 20 22 24 10-241801-089 10-241801-109 10-241801-129 10-241801-149 10-241801-169 10-241801-189 10-241801-209 10-241801-229 10-241801-249 Chain length 76.2mm 88.9mm 101.6mm Cap & Chain for Receptacle Cadmium Plate, Ni Base Chain length 10-241800-089 10-241800-109 10-241800-129 10-241800-149 10-241800-169 10-241800-189 10-241800-209 10-241800-229 10-241800-249 Diagram Alternate Cap finishes (Replace last digit): 0=Chromate, 5=Anodic, G=Electroless Ni Connectors individually packaged with crimp contacts (bulk contacts available) and insert/extract tool. 76.2mm 88.9mm Contacts Variations: 101.6mm See page D-13 for a list of PINS, SOCKETS, COAX and POWER contacts available ASF/LTD/AAO D-11