PANEL SWITCHES 01 19 -IS IS series SW Sealed pushbutton switches * threaded bushing O 12 mm * momentary DISTINCTIVE FEATURES Threaded bushing models Compact, lightweight Tactile feedback Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS * Front panel sealing according to IEC 60529 : IP67 * Shock resistance : 100 g according to IEC 512-4, test 6c * Vibration resistance : 10-500 Hz - 10 g according to IEC 512-4, test 6d * Salt spray : IEC 512-6, test 11f * Operating temperature : -40 C to +85 C (-40 F to +185 F) ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : 400 mA 32 VAC - 100 mA 48 VDC * Initial contact resistance : 50 m max. * Insulation resistance : 1 G min. at 500 VDC * Dielectric strength : 1,000 Vrms * Electrical life at full load : 500,000 cycles GENERAL SPECIFICATIONS * Panel thickness : 1.5 mm (.059) min. - 4 mm (.157) max. * Total travel : 1.7 mm (.066) 0,3 mm * Typical operating force : 4 N 3 N * Low level or mechanical life : 1,000,000 cycles * Torque (applied to nut) : 1 Nm max. with metal nut U166 1.5 Nm max. with plastic nut U4248 * Soldering : 300 C (572 F) max. for 3 seconds The company reserves the right to change specifications without notice. 1 Sealed pushbutton switches * threaded bushing O 12 mm * momentary MATERIALS ELECTRICAL FUNCTIONS * Case : thermoplastic UL94-V0 * Actuator : polyamide 6/6 * Bushing/bezel : polyamide 6/6 * Contacts : silver, gold plated * Terminal seal : epoxy APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. Function 3 (NO) 1.50min-4Max (.059MIN.-.157MAX.) MOUNTING STANDARD BEZEL AGENCY APPROVAL PANEL CUT-OUT 2 A 125 VAC/250 VAC File E83438 12.90 (.507) 1 Availability : consult factory for details of approved models. Marking : to order switches marked UL, complete appropriate box of ordering format. O13.60 (.535DIA) O13.50 (.531DIA) - Flat seal 20.00 (.787) 20.00 (.787) 20.00 (.787) 1.20 (.047) 2.80 (.110) MATRIX MOUNTING Solder lug S Straight P PANEL CUT-OUT 12.90 (.507) 2 O13.60 (.535DIA) 8.40 (.330) CISCOSP ECH: 0.9 1.20 (.047) 5-05-03 O15.60 (.614DIA) Quick-connect Z O13.50 (.531DIA) - O-ring 2.80 (.110) O13.60 (.535DIA) DESSIN ECH 0.9 2 5-05-03 O15.60 (.614DIA) O13.50 (.531DIA) 17.50 (.689) CIMPE2 ECH1 le 29/03/2012 20 (.787) 2 CISCOSZ-A 17.50 (.689) 17.50 (.689) 12.90 (.507) 1.50min-10.00Max (.059MIN.-.393MAX.) 0.80min-4.30Max (.031MIN.-.169MAX.) MATRIX MOUNTING 17.50 (.689) 3.40 (.133) ECH: 0.9 1.00 5-05-03(.039) 1.50min-10.00Max (.059MIN.-.393MAX.) MOUNTING REDUCED MODEL CISCOS-A 0.80min-4.30Max (.031MIN.-.169MAX.) 1.50 (.059) TERMINALS 2.40 (.094) PANEL SWITCHES IS series Sealed pushbutton switches * threaded bushing O 12 mm * momentary BUILD YOUR PART NUMBER BASIC PART NUMBER IS SERIES ELECTRICAL FUNCTION ACTUATOR SHAPES R Round, curved P Round, flat 3 Normally open (NO) TERMINALS S Solder lugs P Straight PC Z1 Actuator marking available on round flat models (symbol 10 mm max.). On request. CONTACTS AD Silver, gold plated Quick-connect 2.8 x 0.5 mm OPTIONS ACTUATOR COLORS Red 00 Black (std) White 08 Bright chrome 8 Bright chrome 10 White Green 9 Orange 20 Satin chrome 4 Grey A Satin chrome 5 Yellow 1 Blue B Dark blue 2 Black 3 6 7/1 OPTION BUSHING AND BEZEL 104 High actuator 075 Dia. 15 (.590) reduced bezel, frontal mounting 234 Dia. 15 (.590) reduced bezel, standard mounting APPROVAL UL Consult factory for detail of approved models. ABOUT THIS SERIES On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart. Notice : please note that not all combinations of above numbers are available. Refer to the following pages for further information. A sealing boot is available to protect the switches against frost and sand (P/N U5125). See "Sealing Boots" section of website. Mounting accessories : Standard hardware supplied : 1 flat seal. Plastic nut 17 mm (.669) across flats, thickness 4 mm (.157) available on request. Part number U4248. 3 PANEL SWITCHES IS series Sealed pushbutton switches * threaded bushing O 12 mm * momentary FLAT SOLDER LUG TERMINALS O17.50 (.688DIA) Normally Open 0.50 (.019) 3.20 (.125) Flat actuator ISP3SAD 5.60 (.220) Normally Open 5.00 (.196) ISR3SAD 1.20 (.047) Curved actuator 5.08 (.200) Also available with straight PC terminals : IS*3PAD or quick-connect terminals : IS*3Z1AD ACTUATOR COLORS BASIC P/N 1 B 2 3 4 5 6 7/1 8 9 A Blue Dark blue Black Green Grey Yellow Red White Bright chrome Orange Satin chrome BUSHING AND BEZEL BASIC P/N 00 08 10 20 4 Black (standard) Bright chrome White Satin chrome 2.00 (.078) O12.00 (.472DIA) 13.00 (.511) PANEL SWITCHES IS series 2.80 (.110) EPOXY O12.00x0.75SI (.472DIAx0.75IS) Sealed pushbutton switches * threaded bushing O 12 mm * momentary OPTIONS BASIC P/N 104 ISP O12.00 (.472DIA) 4.70 (.185) O12.00 (.472DIA) 4.70 (.185) 104 High actuator 075 Dia. 15 (.590) reduced bezel, mounting of the switch from the front into a threaded panel cut-out 234 Dia. 15 (.590) reduced bezel, standard mounting 075 104 ISR 234 AGENCY APPROVAL BASIC P/N UL Availability : consult factory for details of approved models. Marking : to order switches marked UL, complete appropriate box of ordering format. EXAMPLE OF CUSTOM SWITCH * Painted bushing and actuator, soft feel * Flying leads (55 mm) + connector ISR3FADB22X1248-01 * Overmolded rear part 5 PANEL SWITCHES IS series