ELPAC FWA150 SERIES CLASS I 150 Watt ITE Desktop Power Supply * * * * * * * INPUT OUTPUT Input Voltage 85 - 264VAC 100 - 240VAC Nominal Input Frequency 47 - 63Hz Input Current <2A rms Inrush Current <37A at 230VAC cold start Power Factor >0.97 Zero Load Power Consumption <0.5W Earth Leakage Current (Typical) Touch Leakage Current Safety Approval - EN60601-1 Class I High Efficiency: Level V High Power Density 5.4W/in3 Lifetime Expectation >5 years Hold-up Time >25ms at full load Power Factor Correction 5-Year Limited Warranty Output Voltage See Table Total Regulation +/-5% Minimum Load No minimum load required Start-Up Delay <1.5s Hold-Up Time >25ms at any input voltage Ripple & Noise <1% pk-pk ** Over Voltage Protection 110 - 135% <300A @ 264VAC @ 60Hz Over Temperature Protection Active - Recoverable; plus Passive - Non Recoverable <50A @ 132VAC @ 60Hz Over Current Protection 120 - 180% <75A @ 264VAC @ 60Hz Short Circuit Protection Shutdown, auto-restart (hiccup mode) <200A @ 132VAC @ 60Hz Notes **Ripple and noise measured with 20MHz bandwidth; 10F tantalum capacitor in parallel with a 0.1F ceramic capacitor. Inventus Power 1200 Internationale Parkway Woodridge, IL 60517, USA Inventus Power Technical Support: powersupplies@inventuspower.com ELPAC FWA150 SERIES - CLASS I 150 Watt ITE Desktop Power Supply Model Number Output Voltage Output Current Peak Current 1 Total Regulation 2 Typical Efficiency 3 FWA150012A-12A 12.0V 12.5A 15.0A 5% 89% FWA150015A-12A 15.0V 10.0A 12.0A 5% 90% FWA150018A-12A 18.0V 8.3A 10.0A 5% 90% FWA150024A-12A 24.0V 6.3A 7.5A 5% 91% FWA150028A-11A 28.0V 5.3A 6.4A 5% 91% FWA150048A-11A 48.0V 3.2A 3.75A 5% 92% Notes 1) Maximum peak load (180W) lasting 500ms with a maximum 10% duty cycle. 2) Includes initial setting, line regulation, load regulation, and thermal drift. 3) Typical at 115VAC (including output cable). General Environmental Efficiency Avg. Efficiency 90.8% @ 115VAC; 92.8% @ 230VAC MTBF min. 200,000 hours demonstrated Size 7.56" (192mm) x 2.45" (62.2mm) x 1.52" (38.7mm) Operating Temperature 0 - 60C (Full load to 40C, derate linearly to 50% load at 60C) EMC & Safety Emissions FCC class B, CISPR11 class B EN61000-3-2, -3 Immunity EN61000-4-2, -3, -4, -5, -6, -8, -11 Storage Temperature -40C to +85C Relative Humidity 5-95%, non-condensing Cooling Natural Convection Power Density 5.4W/in3 Vibration All units production tested to 19.6m/s2 Input Configuration Output Configuration Output Pin Assignments Standard Input Cable Standard Output Cable 4ft for 12V & 15V 6ft for 18V, 24V, 28V & 48V Pin 1 +V1 4x16awg (12V& 18V); 4x18awg (24V & 48V*) Pin 2 +V1 Cord Size Pin 3 Return Connector (PSU side) Switchcraft DIN-8 P/N 15BL8M (male pins) Pin 4 +V1 Return Mating Connector Switchcraft 62GB8F (8 pin) or equivalent (12V, 15V, 18V, 24V) Switchcraft 62GB8F (5 pin) or equivalent (30V, 48V) Pin 5 Pin 6 +V1 Pin 7 Return Pin 8 Return Weight 1.55 lbs (0.70 Kg) Not Provided Connection on Power Supply IEC 320 C14 Receptacle Body *with EMI bead cTUVus UL 60601-1 Certified by TUV to the following: CAN/CSA-22.2 No.601.1-M90 CB per IEC60601-1 CE marked to LVD Mechanical Drawing FWA150-DWG Inventus Power 1200 Internationale Parkway Woodridge, IL 60517, USA FWA150-DWG-24V IP_DS_FWA150-Class I_5-2-17_01 inventuspower.com (c)2017 Inventus Power, All rights reserved.