Inventus Power
1200 Internationale Parkway
Woodridge, IL 60517, USA
Inventus Power Technical Support:
powersupplies@inventuspower.com
ELPAC FWA150 SERIES
CLASS I
150 Watt
ITE Desktop Power Supply
• Safety Approval - EN60601-1 Class I
• High Efciency: Level V
• High Power Density 5.4W/in3
• Lifetime Expectation >5 years
• Hold-up Time >25ms at full load
• Power Factor Correction
• 5-Year Limited Warranty
INPUT
Input Voltage 85 – 264VAC
100 – 240VAC Nominal
Input Frequency 47 – 63Hz
Input Current <2A rms
Inrush Current <37A at 230VAC cold start
Power Factor >0.97
Zero Load
Power Consumption <0.5W
Earth Leakage Current
(Typical)
<200μA @ 132VAC @ 60Hz
<300μA @ 264VAC @ 60Hz
Touch Leakage Current <50μA @ 132VAC @ 60Hz
<75μA @ 264VAC @ 60Hz
OUTPUT
Output Voltage See Table
Total Regulation +/-5%
Minimum Load No minimum load required
Start-Up Delay <1.5s
Hold-Up Time >25ms at any input voltage
Ripple & Noise <1% pk-pk **
Over Voltage Protection 110 – 135%
Over Temperature
Protection
Active - Recoverable; plus
Passive - Non Recoverable
Over Current Protection 120 – 180%
Short Circuit Protection Shutdown, auto-restart (hiccup mode)
Notes
**Ripple and noise measured with 20MHz bandwidth; 10μF tantalum capacitor in parallel with a 0.1μF ceramic capacitor.
Inventus Power
1200 Internationale Parkway
Woodridge, IL 60517, USA
IP_DS_FWA150-Class I_5-2-17_01
inventuspower.com
©2017 Inventus Power, All rights reserved.
Model Number Output Voltage Output Current Peak Current 1 Total Regulation 2 Typical Efciency 3
FWA150012A-12A 12.0V 12.5A 15.0A ±5% 89%
FWA150015A-12A 15.0V 10.0A 12.0A ±5% 90%
FWA150018A-12 A 18.0V 8.3A 10.0A ±5% 90%
FWA150024A-12A 24.0V 6.3A 7. 5 A ±5% 91%
FWA150 028 A-11A 28.0V 5.3A 6.4A ±5% 91%
FWA150 0 48A-11A 48.0V 3.2A 3.75A ±5% 92%
Notes
1) Maximum peak load (180W) lasting 500ms with a maximum 10% duty cycle.
2) Includes initial setting, line regulation, load regulation, and thermal drift.
3) Typical at 115VAC (including output cable).
General
Efciency Avg. Efciency 90.8% @
115VAC; 92.8% @ 230VAC
MTBF min. 200,000 hours
demonstrated
Size 7.56” (192mm) x 2.45”
(62.2mm) x 1.52” (38.7mm)
Weight 1.55 lbs (0.70 Kg)
Power Density 5.4W/in3
Input Conguration
Standard
Input Cable Not Provided
Connection on
Power Supply
Body
IEC 320 C14 Receptacle
Mechanical Drawing
Environmental
Operating
Temperature
0 – 60°C (Full load to 40°C,
derate linearly to 50% load at
60°C)
Storage
Temperature -40°C to +85°C
Relative
Humidity 5-95%, non-condensing
Cooling Natural Convection
Vibration All units production tested to
19.6m/s2
Output Conguration
Standard
Output Cable
4ft for 12V & 15V
6ft for 18V, 24V, 28V & 48V
Cord Size 4x16awg (12V& 18V); 4x18awg
(24V & 48V*)
Connector
(PSU side)
Switchcraft DIN-8
P/N 15BL8M (male pins)
Mating
Connector
Switchcraft 62GB8F (8 pin) or
equivalent (12V, 15V, 18V, 24V)
Switchcraft 62GB8F (5 pin) or
equivalent (30V, 48V)
EMC & Safety
Emissions FCC class B, CISPR11 class B
EN61000-3-2, -3
Immunity EN61000-4-2, -3, -4, -5, -6, -8,
-11
Certied by
TUV to the
following:
cTUVus
UL 60601-1
CAN/CSA-22.2 No.601.1-M90
CB per IEC60601-1
CE marked to LVD
Output Pin Assignments
Pin 1 +V1
Pin 2 +V1
Pin 3 Return
Pin 4 +V1
Pin 5 Return
Pin 6 +V1
Pin 7 Return
Pin 8 Return
ELPAC FWA150 SERIES - CLASS I
150 Watt
ITE Desktop Power Supply
*with EMI bead
F WA150 - DWG F WA150 - DWG - 24V
