Z-One(R) Digital Power Analog POL Isolated DC-DC Front Ends Chassis Mount Modular Products 2010 ONLINE AC-DC & DC-DC POWER SOLUTIONS PRODUCT UPDATE PoE CompactPCI Ruggedized Table of Contents Point-Of-Load Conversion & Management Bus Programmable Digital POL Solutions 2 Distributed Power Board-Mount DC-DC TM Brick Overview Page 6 SMT = Surface Mount TH = Through Hole No-Bus Digital POL Converters 2 Y-Series Analog POLs 4 Board Mount Isolated DC-DC NonBrick 1/16 Brick 1/8 Brick 1/4 Brick 1/2 Brick 7 7 7 Bus Converters Power over Ethernet 7 Single Output - SMT 22 Single Output - TH 10 Dual Output - SMT 23 22 Dual Output - TH 13 12 Triple Output - TH 16 Quad Output - TH 18 Input Filters - SMT 23 Input Filters - TH 20 8 21 21 8 9 10 12 Rack and Chassis-Mount Front Ends Rack-Mount Single Output 25 Rack-Mount Power Shelves 27 Chassis-Mount Single Output 28 NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective divisional president of Power-One, Inc. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. Board-Only, U-Channel, & Enclosed Chassis Mount Open-Frame Linears Single Output 34 AC-DC Single Output 40 to 7000 Watts 28 Dual Output 35 AC-DC Dual Output 125 to 150 Watts 29 Triple Output 36 AC-DC Triple Output 37 to 150 Watts 30 AC-DC Quad Output Under 100 Watts 30 110 to 125 Watts 31 130 to 150 Watts 31 200 to 375 Watts 32 Modular AC-DC 33 Railway & Rugged Specialty LPM615 CompactPCI & PoE Railway & Rugged Overview Page 47 CompactPCI 37 Power Over Ethernet 38 DIN-Rail Mount, AC-DC & DC-DC LOK Series 40 W Series, Includes EN50155 Models 40 X Series with PFC 41 Battery Chargers 41 Cassettes & Positive Switching Regulators DC-DC Cassettes AC-DC Cassettes M 50 H 50 K 47 M 44 S 45 S 51 S/PFC 51 K 51 P 48 Q 46 K/PFC KP/PFC 51 51 Cassette Battery Chargers 50 Positive Switching Regulators 42 Power-One, maXyz, No-Bus, Z-One, Z Digital IBA, and Z-POL are trademarks and/or logos of Power-One, Inc. Z-One(R) Digital Power TM No-Bus POL Converters Power-One's No-BusTM POL converters provide sophisticated power management capabilities without the cost and complexity of third-party controllers and the communication bus interfaces required by analog architectures. Coordination and Optimization via Simple Pin Strapping t t Signals and Protections Reporting of output current and temperature via signal pins. Thresholds for overvoltage, undervoltage, and Power Good track the output voltage settings. t t t Output Voltages and Currents t Output voltages (0.5 to 5.5 V) and turn-on delays are configured with an external resistor and a capacitor, respectively. Up to four No-Bus POLs can current share using a single control trace. No-Bus POLs can start up with pre-biased outputs. Sink and source current capabilities for active bus termination. Frequency synchronization and phase interleaving reduce EMI. Comprehensive sequencing and cascading management. Feedback loop compensation and enable logic. Frequency synchronization, fault propagation, and current sharing are implemented, without external components, by interconnecting pins on the Z-POLs being coordinated. Bus Programmable POL Solutions Power-One's bus-programmable POL solutions combine many innovative operating concepts to achieve an unprecedented level of power-system integration. A multitude of parameters, such as output voltages, sequencing, tracking, and protection limits are userprogrammed via I2C, or GUI, and stored in a Digital Power Manager. Although Z-One(R) Digital Power can be programmed via an I2C bus, it does not require users to provide an I2C interface, host processor, or non-volatile memory; Z-One(R) Digital Power can operate autonomously in any system. Additional features include: Open architecture based on industry standard I2C interface. Wide input ranges and programmable outputs reduce the number of unique models in inventory. Extremely scalable architecture provides up to 32 programmable outputs from 0.5 to 5.5 VDC. Significantly reduced component count improves reliability, power density, and cost. GUI-driven configuration and simulation simplifies power system development, accelerating time to market. Fully-integrated point-of-load solution eliminates component incompatibility issues. Manages up to four analog components including VRMs, POLs, fans, and linear regulators. 9 mm ZM7300 Digital Power Managers 2 Host System PC-Based GUI IBA Regulated Bus Converter ZM7300 Series controllers can manage analog components (including VRMs, linear regulators, POLs, and fans) and Z-POL converters for a total of 32 devices. I2C communication with host systems in 100 kbs and 400 kbs modes of operation is supported. These 9 x 9mm QFN-package controllers can be purchased preprogrammed, or can be user programmed via an IEEE 1149.1 compliant JTAG port or via the Z-Series GUI and the I2C port. Additional features include: Ensures data integrity by storing configuration instructions in non-volatile memory. Collects I2C compatible POL performance data (output voltage, output current, POL temperature, and protection status). Monitors the intermediate bus, accepts interrupts, initiates crowbar protection, and interfaces with dc-dc bus converters and ac-dc front ends. Digital POL Conversion and Management ZM7300 Series Digital Power Managers Model Number Digital POL Management Nodes Analog Component Management Nodes Combined Nodes* ZM7304 4 4 4 ZM7308 8 4 8 ZM7300 Digital Power Manager ZM7316 16 4 16 ZM7332 32 4 32 Controls up to 32 Bus Programmable POLs and 4 analog components Compact 9 x 9 mm package * Combined nodes are the maximum number of analog and digital components that can be concurrently managed. Bus Programmable Digital POLs Input Voltage Output Program Range Max Amps Efficiency Model Latest-Generation High Efficiency Digital POLs 8 to 14 +0.5 to +5.5 6 92% ZY8105 8 to 14 +0.5 to +5.5 10 92% ZY8110 8 to 14 +0.5 to +5.5 20 92% ZY8120 ZY11XX & ZY71XX 8 to 14 +0.5 to +3.65 40 94% ZY8140 8 to 14 +0.5 to +2.75 60 92% ZY8160 1.25 x 0.55 x 0.31 inch 32 x 14 x 8 mm Ultra-Wide Input Digital POLs 3 to 14 +0.5 to +5.5 7 92% ZY7007 3 to 13.2 +0.5 to +5.5 10 90% ZY7010 3 to 13.2 +0.5 to +5.5 15 92% ZY7015 3 to 13.2 +0.5 to +5.5 15 94% ZY7115 3 to 13.2 +0.5 to +5.5 20 92% ZY7120 No-Bus Digital POLs Input Voltage Output Trim Range Max Amps ZY7007 & ZY1207 0.87 x 0.49 x 0.26 inch 22.2 x 12.5 x 6.5 mm Efficiency Model Latest-Generation High Efficiency Digital POLs 8 to 14 +0.5 to +5.5 5 93% ZY2105 8 to 14 +0.5 to +5.5 10 92% ZY2110 8 to 14 +0.5 to +5.5 20 92% ZY2120 8 to 14 +0.5 to +3.6 40 93% ZY2140 8 to 14 +0.5 to +2.75 60 93% ZY2160 ZY7010, ZY7015, & ZY1015 1.25 x 0.55 x 0.28 inch 32 x 14 x 7.1 mm Ultra-Wide Input Digital POLs 3 to 14 +0.5 to +5.5 7 92% ZY1207 3 to 14 +0.5 to +5.5 15 94% ZY1015 3 to 14 +0.5 to +5.5 15 94% ZY1115 3 to 14 +0.5 to +5.5 20 92% ZY1120 ZY2160 & ZY8160 2.4 x 0.55 x 1.1 inch 61 x 14 x 27.9 mm ZY2105 & ZY8105 ZY2110 & ZY8110 ZY2120 & ZY8120 ZY2140 & ZY8140 1.2 x 0.26 x 0.84 inch 30.5 x 6.6 x 21.3 mm 1.2 x 0.26 x 0.84 inch 30.5 x 6.6 x 21.3 mm 1.6 x 0.84 x 0.41 inch 40.6 x 21.3 x 10.4 mm 1.8 x 0.55 x 1.1 inch 45.7 x 14 x 27.9 mm 3 Analog POL Converters Y-Series (DOSA-Compliant) Surface-Mount POL Converters Input Voltage Max Amps Output Trim Range Efficiency Model Models with 5.5Vin and Lower, Sorted by Max Amps YM05S, YM12S, & YNM05S 0.8 x 0.45 x 0.25 inch 20.3 x 11.4 x 6.3 mm 3 to 5.5 5 +0.75 to +3.63 94% YM05S05 3 to 5.5 6 +0.75 to +3.63 93% YNM05S06 3 to 5.5 10 +1.1 to +1.3 87% YNL05S10012 3 to 5.5 10 +1.7 to +1.9 91% YNL05S10018 3 to 5.5 10 +2.3 to +2.7 93% YNL05S10025 3 to 5.5 10 +3 to +3.6 94% YNL05S10033 3 to 5.5 10 +0.75 to +3.63 94% YS05S10 3 to 5.5 16 +0.75 to +3.63 93% YS05S16 4.5 to 5.5 20 +0.75 to +3.63 94% YNC05S20 +0.8 to +1.8 90% YPB09S30 Model with 4.5 to 13.5Vin YNC, YNL, & YS 1.30 x 0.53 x 0.31 inch 33 x 13.5 x 8 mm 4.5 to 13.5 30 Models with 9.6 to 14Vin, Sorted by Max Amps 9.6 to 14 5 +0.75 to +5.5 92% YM12S05 9.6 to 14 10 +1.7 to +1.9 90% YNL12S10018 9.6 to 14 10 +4.5 to +5.5 95% YNL12S10050 9.6 to 14 16 +0.75 to +5.5 94% YS12S16 9.6 to 14 20 +0.75 to +5.5 94% YNC12S20 YPB09S 1.00 x 0.50 x 0.48 inch 25.4 x 12.7 x 12.2 mm 3, 6, 10, and 20-Amp YEV-Series POLs Provide Tightly-Regulated 0.59 - 5.1V Trimmable Outputs YEV-Series POLs combine ultra-high efficiencies with excellent thermal management to provide current-dense footprints, and low profiles that minimize impedance to system airflow; enhancing cooling for both upstream and downstream devices. Industry-standard SIP packages. Wide input voltage range: 4.5 V-13.8 V. 3, 6, and 10-amp models (top picture) utilize compact 0.41 x 0.40 x 0.65 inch (10.4 x 10.2 x 16.5 mm) packages. 20-amp model (bottom picture) utilizes a compact 1.45 x 0.34 x 0.61 inch (36.8 x 8.6 x 15.5 mm) package. Exceptional thermal performance, even in high temperature environments with minimal airflow. Rugged designs provide MTBFs up to 67 million hours. www.power-one.com 4 Analog POL Converters Y-Series (DOSA-Compliant) Through-Hole POL Converters Input Voltage Max Amps Output Trim Range Efficiency Model Models with 3.3 to 5.5Vin, Sorted by Max Amps 3 to 5.5 6 +0.75 to +3.63 93% YNV05T06 3 to 5.5 10 +0.75 to +3.63 95% YNV05T10 3 to 5.5 10 +3 to +3.6 95% YNV05T10033 3 to 5.5 16 +0.75 to +3.63 93% YNV05T16 YH09T40 1.45 x 1.12 x 0.5 inch 36.8 x 28.3 x 12.7 mm Models with 4.5 to 13.8Vin, Sorted by Max Amps (DOSA does not specify YEV equivalents) 4.5 to 13.8 3 +0.6 to +5.1 93% YEV09T03 4.5 to 13.8 6 +0.6 to +5.1 93% YEV09T06 4.5 to 13.8 10 +0.6 to +5.1 93% YEV09T10 4.5 to 13.8 20 +0.6 to +5.1 93% YEV09T20 Model with 5 to 13.8Vin, Sorted by Max Amps 5 to 13.8 40 +0.6 to +3.63 92% YH09T40 5 to 13.8 60 +0.6 to +3.63 93% YV09T60 YNV05T06 & YNV12T05 0.90 x 0.40 x 0.21 inch 22.9 x 10.2 x 5.4 mm Models with 9.6 and Higher Vin, Sorted by Max Amps 9.6 to 14 5 +0.75 to +5.5 90% YNV12T05 9.6 to 14 10 +0.75 to +5.5 94% YNV12T10 9.6 to 14 16 +0.75 to +5.5 94% YNV12T16 10 to 14 25 +0.8 to +5.5 94% YV12T25 YNV05T10, YNV05T10XXX, YNV05T16, YNV12T10, & YNV12T16 2.0 x 0.54 x 0.28 inch 50.8 x 13.6 x 7.1 mm Current-Dense YV09T60 POL Delivers a 60 Amp 0.6 V - 3.63 V Programmable Output 2.58 x 0.63 x 1.25 inch 65.5 x 16 x 31.7 mm The YV09T60 POL converter offers exceptional thermal performance, even in high temperature environments with minimal airflow. Industry-standard SIP package High-efficiency multiphase synchronous buck topology Low-noise fixed-frequency operation Overcurrent, output overvoltage, and overtemperature protections with automatic restart Wide input voltage range: 5 V-13.8 V Extended operating temperature range: 0 to 70 C YV12T25 2.00 x 1.25 x 0.34 inch 50.8 x 31.8 x 8.5 mm 5 Isolated DC-DC Converters An Industry-Leading Selection of High-Efficiency DC-DC Bricks Power-One offers a comprehensive range of DPA bricks and IBA regulated bus converters, in footprints from 1/16 to 1/2. Industry-leading efficiencies, and advanced thermalmanagement techniques increase current densities, reduce power consumption, and provide more power in elevatedtemperature environments. These flexible products can be used as isolated DC-DC converters, in applications with separate input/output grounds, or used as non-isolated converters in applications with common input/output grounds. DOSA-compliant models are available. Please refer to the product selection tables on the following pages for model-level details. Cost-Effective Sixteenth-Brick Provides up to 92% Efficiency The DOSA-compliant SSQE48T20033 20-amp, 3.3 Vout, sixteenth-brick delivers power densities up to 56 watts per square inch. Additional features include: * Ultra-low profile height: 0.374". * Full Telco input range: 36-75 VDC. * Capability to withstand a 100 V input transient for 100 ms. * On-board input differential LC-filtering. * SMT and through-hole-mount models are available. 40 and 50 Amp Eighth-Bricks Deliver Best-in-Class Elevated Temperature Performance The latest SQE48T Series eighth-bricks provide single-output elevated-temperature performance that exceeds most similaramperage quarter-bricks. Additional features include: * Wide range 36-75 VDC inputs. * 2250 VDC input-to-output isolation provides Basic insulation. * Start-up into highly-capacitive loads. * Rugged design withstands a 100 V input transient for 100 ms. High-Current-Density QME Quarter-Bricks Available with Outputs from 1 to 12 VDC QME Series products provide up to 40 amps from industrystandard quarter-brick footprints. Additional features include: * Outstanding thermal performance in high ambient temperature environments. * No minimum load required. * Capability to start-up into pre-biased loads. * Rugged design withstands 100 V input transient for 100 ms. 6 High-Efficiency Bus Converters, Fixed Ratio and Wide-Input Models Available Bus converter products include models with ultra-high efficiencies (up to 97%). Available features include: * Fixed ratio (4:1 and 5:1) and wide input models. * A wide range of output voltages facilitates selecting the most efficient bus voltage for a specific application. * Extended operating-temperature ranges: -40 to +85 C. * High reliability: MTBF = 20 million hours. Isolated DC-DC > Thru-Hole > Single Output Unsigned output voltages are isolated and can be used as either + or - polarities. Thru-Hole > Single-Output > Bus Converters Max Brick Factory Output Amps Size Set Vout Range Models with fixed-ratio inputs/outputs 20 1/8 N/A 8.7 to 13.7 Input Voltage Vout Regulation Efficiency 42 to 53 5.1 fixed ratio 96% Model SQT48T20120 HBC48T 2.40 x 2.28 x 0.50 inch 61.0 x 57.9 x 12.7 mm 27 1/8 N/A 6.7 to 11 38 to 55 5.1 fixed ratio 95% SQT48T27096 38 1/8 N/A 7 to 11 38 to 55 5.1 fixed ratio 95% SQT48T38096 25 1/4 N/A 10.5 to 13.3 42 to 53 4.1 fixed ratio 96% QTS48T25120 38 1/4 N/A 7.2 to 11 36 to 55 5.1 fixed ratio 96% QTS48T38096 46 1/4 N/A 7.2 to 11 36 to 55 5.1 fixed ratio 97% QTS48T46096 Models with wide-range inputs 10 1/8 12 9.6 to 13.2 36 to 75 2% total 93% SQE48T10120 11 1/4 12 9.6 to 13.2 36 to 75 5% total 91% QBC11ZH 20 1/4 12 9.6 to 13.2 36 to 75 2% total 93% QME48T20120 25 1/2 12 9.6 to 13.2 36 to 75 2% total 93% HBC48T25120 30 1/2 12 10.8 to 13.2 36 to 75 3% total 91% HDS48T30120 32 1/2 12 10.8 to 13.2 35 to 75 4% total 94% HKS48T30120 Additional single-output products are listed in the through-hole and surface-mount isolated DC-DC sections. Thru-Hole > Single-Output > Power Over Ethernet Input Voltage Factory Set Vout Output Trim Range Max Amps Model 36 to 75 52.5 50 to 53 3.8 HHS04Z52 36 to 75 53.7 51.2 to 54.2 4.8 HHS05Z55 HDS & HKS 2.40 x 2.28 x 0.50 inch 61.0 x 57.9 x 12.7 mm HHS04 & HHS05 2.40 x 2.28 x 0.42 inch 61.0 x 57.9 x 10.7 mm QBC 2.28 x 1.45 x 0.43 inch 57.9 x 36.8 x 11 mm QME48T 2.30 x 1.45 x 0.48 inch 58.4 x 36.8 x 12.2 mm SQE48T SQT48T20 QTS48T25 2.30 x 0.90 x 0.41 inch 58.4 x 22.8 x 10.3 mm 2.30 x 0.9 x 0.39 inch 58.4 x 22.8 x 10 mm 2.28 x 1.45 x 0.40 inch 57.9 x 36.8 x 10.2 mm SQT48T27 & SQT48T38 QTS48T38, QTS48T46 2.30 x 0.90 x 0.48 inch 58.4 x 22.8 x 12.1 mm 2.28 x 1.45 x 0.50 inch 57.9 x 36.8 x 12.7 mm 7 Isolated DC-DC > Thru-Hole > Single Output Unsigned output voltages are isolated and can be used as either + or - polarities. Thru-Hole > Single-Output > 1/16-Brick SQ24T & SQ48T 2.30 x 0.90 x 0.28 inch 58.4 x 22.8 x 7.1 mm Input Voltage Factory Set Vout Output Trim Range Max Amps Model 36 to 75 1.2 1 to 1.3 25 SSQE48T25012 36 to 75 1.5 1.2 to 1.6 25 SSQE48T25015 36 to 75 1.8 1.5 to 1.9 25 SSQE48T25018 36 to 75 2.5 2 to 2.7 25 SSQE48T25025 36 to 75 3.3 2.7 to 3.6 20 SSQE48T20033 36 to 75 3.3 2.7 to 3.6 15 SSQE48T15033 36 to 75 3.3 2.7 to 3.6 10 SSQE48T10033 36 to 75 5.0 4 to 5.5 13 SSQE48T13050 36 to 75 12.0 9.6 to 13.2 7 SSQE48T07120 Thru-Hole > Single-Output > 1/8 Brick SQE48T 2.30 x 0.90 x 0.41 inch 58.4 x 22.8 x 10.3 mm Input Voltage Factory Set Vout Output Trim Range Max Amps Model Models with 18 to 36Vin, Sorted by Factory Set Vout 18 to 36 2 1.6 to 2.2 15 SQ24T15020 18 to 36 3.3 2.7 to 3.6 15 SQ24T15033 18 to 36 5 4 to 5.5 10 SQ24T10050 18 to 36 6 4.8 to 6.6 8 SQ24T08060 18 to 36 12 9.6 to 13.2 4 SQ24T04120 18 to 36 15 12 to 16.5 3.3 SQ24T03150 Models with Nominal 48Vin, Sorted by Factory Set Vout 36 to 75 1.2 1.1 to 1.3 15 SQ48T15012 36 to 75 1.2 1.1 to 1.3 30 SQE48T30012 SQT48T20 36 to 75 1.2 1.1 to 1.3 50 SQE48T50012 2.30 x 0.9 x 0.39 inch 58.4 x 22.8 x 10 mm 36 to 75 1.5 1.2 to 1.6 15 SQ48T15015 36 to 75 1.5 1.2 to 1.6 30 SQE48T30015 SQT48T27 & SQT48T38 36 to 75 1.5 1.2 to 1.6 40 SQE48T40015 2.30 x 0.90 x 0.48 inch 58.4 x 22.8 x 12.1 mm 36 to 75 1.8 1.5 to 1.9 15 SQ48T15018 36 to 75 1.8 1.5 to 1.9 30 SQE48T30018 36 to 75 1.8 1.5 to 1.9 40 SQE48T40018 36 to 75 2.5 2 to 2.7 15 SQ48T15025 36 to 75 2.5 2 to 2.7 30 SQE48T30025 36 to 75 2.5 2 to 2.7 40 SQE48T40025 36 to 75 3.3 2.7 to 3.6 15 SQ48T15033* 36 to 75 3.3 2.7 to 3.6 20 SQE48T20033 36 to 75 3.3 2.7 to 3.6 30 SQE48T30033 36 to 75 5 4 to 5.5 10 SQ48T10050 36 to 75 5 4 to 5.5 20 SQE48T20050 36 to 75 6 4.8 to 6.6 8 SQ48T08060 36 to 75 6 5.4 to 6.6 17 SQE48T17060 36 to 75 8 6.4 to 8.8 5.3 SQ48T05080 38 to 55 9.6 6.7 to 11 27 SQT48T27096 ** 38 to 55 9.6 7 to 11 38 SQT48T38096 ** 36 to 75 12 9.6 to 13.2 10 SQE48T10120 38 to 55 12 8.7 to 13.7 20 SQT48T20120 ** SSQE48T 1.3 x 0.9 x 0.37 inch 33 x 22.9 x 9.4 mm ** Fixed-ratio input-to-output voltage www.power-one.com 8 Isolated DC-DC > Thru-Hole > Single Output Unsigned output voltages are isolated and can be used as either + or - polarities. Thru-Hole > Single-Output > 1/4 Brick Input Voltage Factory Set Vout Output Trim Range Max Amps Model Q24T & Q48T Models with 18 to 36Vin, Sorted by Factory Set Vout 18 to 36 3.3 2.7 to 3.6 25 Q24T25033 18 to 36 3.3 2.7 to 3.6 30 Q24T30033 18 to 36 5 4 to 5.5 15 Q24T15050 25 QW24T25033 2.30 x 1.45 x 0.28 inch 58.4 x 36.8 x 7.1 mm Models with Ultra-Wide Input, Sorted by Factory Set Vout 18 to 60 3.3 2.64 to 3.63 Models with Nominal 48Vin, Sorted by Factory Set Vout 36 to 75 1.2 1.1 to 1.3 30 QL48T30012 36 to 75 1.2 1.1 to 1.3 50 QM48T50012 36 to 75 1.5 1.2 to 1.6 30 Q48T30015 36 to 75 1.5 1.2 to 1.6 40 QME48T40015 36 to 75 1.8 1.5 to 1.9 25 Q48T25018 36 to 75 1.8 1.5 to 1.9 30 Q48T30018 36 to 75 1.8 1.5 to 1.9 45 QM48T45018 36 to 75 2 1.6 to 2.2 25 Q48T25020 36 to 75 2 1.8 to 2.2 40 QM48T40020 36 to 75 2 1.6 to 2.2 45 QM48T45020 QBC 2.28 x 1.45 x 0.43 inch 57.9 x 36.8 x 11 mm QL48T 2.30 x 1.45 x 0.28 inch 58.4 x 36.8 x 7.1 mm 36 to 75 2.5 2 to 2.7 30 Q48T30025 36 to 75 2.5 2 to 2.7 40 QME48T40025 36 to 75 2.5 2 to 2.7 45 QM48T45025 36 to 75 3.3 2.7 to 3.6 25 Q48T25033 36 to 75 3.3 2.7 to 3.6 30 Q48T30033 36 to 75 3.3 2.7 to 3.6 40 QME48T40033 36 to 75 3.3 2.7 to 3.6 45 QM48T45033 36 to 75 5 4.5 to 5.5 15 Q48T15050 QM48T 36 to 75 5 4 to 5.5 20 Q48T20050 36 to 75 5 4 to 5.5 25 QM48T25050 2.30 x 1.45 x 0.31 inch 58.4 x 36.8 x 7.8 mm 36 to 75 5 4 to 5.5 40 QME48T40050 36 to 55 9.6 7.2 to 11 38 QTS48T38096* 36 to 55 9.6 7.2 to 11 46 QTS48T46096* 36 to 75 12 9.6 to 13.2 8 Q48T08120 36 to 75 12 9.6 to 13.2 11 QBC11ZH 36 to 75 12 9.6 to 13.2 14 QM48T14120 36 to 75 12 9.6 to 13.2 20 QME48T20120 QME48T QTS48T25120* 2.30 x 1.45 x 0.48 inch 58.4 x 36.8 x 12.2 mm 42 to 53 12 10.5 to 13.3 25 QW24T25033 QTS48T25 2.30 x 1.45 x 0.48 inch 58.4 x 36.8 x 12.2 mm 2.28 x 1.45 x 0.40 inch 57.9 x 36.8 x 10.2 mm QTS48T38, QTS48T46 2.28 x 1.45 x 0.50 inch 57.9 x 36.8 x 12.7 mm 9 Isolated DC-DC > Thru-Hole > Single Output Unsigned output voltages are isolated and can be used as either + or - polarities. Thru-Hole > Single-Output > 1/2 Brick BWS 1.25 X 0.80 X 0.52 inch 31.8 X 20.3 X 13.2 mm Input Voltage Factory Set Vout Output Trim Range Max Amps Model Models with Nominal 48Vin, Sorted by Factory Set Vout 36 to 75 12 10.8 to 13.2 25 HBC48T25120 DFC6 36 to 75 12 10.8 to 13.2 30 HDS48T30120 2.00 x 1.00 x 0.45 inch 50.8 x 25.4 x 11.4 mm 36 to 75 12 10.8 to 13.2 32 HKS48T30120 36 to 75 28 21.0 to 33.0 12.5 HBA48T12280 36 to 75 52.5 50 to 53 3.8 HHS04Z52 36 to 75 53.7 51.2 to 54.2 4.8 HHS05Z55 DFC15 2.02 x 1.62 x 0.55 inch 51.3 x 41.2 x 13.8 mm DGP12 2.02 x 2.02 x 0.45 inch 51.3 x 51.3 x 11.4 mm DSP1 0.77 x 0.40 x 0.27 inch 19.6 x 10.2 x 6.9 mm Thru-Hole > Single-Output > Non-Brick Input Voltage Factory Set Vout Output Trim Range Max Amps Model Models with 3.3Vout, Sorted by Max Amps 8.4 to 36 3.3 N/A 0.9 20IMX4-03-8 16.8 to 75 3.3 N/A 0.9 40IMX4-03-8 8.4 to 36 3.3 2.5 to 3.5 1.5 20IMX7-03-8 16.8 to 75 3.3 2.5 to 3.5 1.5 40IMX7-03-8 40 to 121 3.3 2.5 to 3.5 1.5 70IMX7-03-8 8.4 to 36 3.3 2.6 to 3.5 4.5 20IMX15-03-8RG 16.8 to 75 3.3 2.6 to 3.5 4.5 40IMX15-03-8RG 50 to 150 3.3 2.6 to 3.5 4.5 110IMY15-03-8RG Models with 5 to 5.2Vout, Sorted by Factory Set Vout and Max Amps 4.5 to 5.5 5 N/A 0.1 HBA48T12280 36 to 72 5 N/A 0.5 BWS4805 2.40 x 2.28 x 0.50 inch 61.0 x 57.9 x 12.7 mm 8.4 to 36 5 N/A 0.7 20IMX4-05-8 16.8 to 75 5 N/A 0.7 40IMX4-05-8 40 to 121 5 N/A 0.7 70IMX4-05-8 18 to 36 5 N/A 1 24IMS6-05-9 36 to 75 5 N/A 1 48IMS6-05-9 3.5 to 16 5 N/A 1.2 DFC6U5S5 3.5 to 16 5 4.5 to 5.5 2 DGP12U5S5 50 to 150 5 3.8 to 5.2 2.8 110IMY15-05-05-8 HBC48T 8.4 to 36 5.1 3.8 to 5.4 1.2 20IMX7-05-8 2.40 x 2.28 x 0.50 inch 61.0 x 57.9 x 12.7 mm 16.8 to 75 5.1 3.8 to 5.4 1.2 40IMX7-05-8 40 to 121 5.1 3.8 to 5.4 1.2 70IMX7-05-8 60 to 150 5.1 3.8 to 5.4 1.2 110IMX7-05-8 8.4 to 36 5.1 4.1 to 5.4 2.3 20IMX15-05-8R 16.8 to 75 5.1 4.1 to 5.4 2.5 40IMX15-05-8R 50 to 150 5.1 4.1 to 5.4 2.5 110IMY15-05-8R 14 to 36 5.1 4.1 to 5.4 2.7 24IMS15-05-9R 36 to 75 5.1 4.1 to 5.4 2.7 48IMS15-05-9R 8.4 to 36 16.8 to 75 5.1 5.1 3.8 to 5.3 3.8 to 5.3 3.5 3.5 20IMX15-05-8RG 40IMX15-05-8RG 50 to 150 5.1 3.8 to 5.3 3.5 110IMY15-05-8RG 14.4 to 36 5.1 5.07 to 5.13 10 24IMX70-05-0G 25 to 75 5.1 5.07 to 5.13 10 40IMX70-05-0G 50 to 150 5.1 5.07 to 5.13 10 110IMY70-05-0G HDS & HKS 2.40 x 2.28 x 0.50 inch 61.0 x 57.9 x 12.7 mm www.power-one.com 10 Continued on Next Page DSP1N5S5 Alpha-sorted graphics and dimensions augment model listings from both pages. Isolated DC-DC > Thru-Hole > Single Output Unsigned output voltages are isolated and can be used as either + or - polarities. IMS6 Thru-Hole > Single-Output > Non Brick Input Voltage Factory Set Vout Output Trim Range 1.3 x 0.79 x 0.33 inch 33 x 20 x 8.5 mm Max Amps Model 0.1 DSP1N5S7 DSP1N5S12 Models with 7 to 9Vout, Sorted by Max Amps 4.5 to 5.5 7 N/A IMS15 Models with 12Vout, Sorted by Max Amps 4.5 to 5.5 12 N/A 0.08 8.4 to 36 12 N/A 0.3 20IMX4-12-8 16.8 to 75 12 N/A 0.3 40IMX4-12-8 36 to 75 12 N/A 0.5 48IMS6-12-9 20 to 60 12 11.4 to 12.6 1.2 DFC15U48S12 50 to 150 12 9 to 12.6 1.4 110IMY15-12-12-8 10 to 20 12 10.8 to 13.2 2.1 OWS1212 14.4 to 36 12 11.94 to 12.06 5.8 24IMX70-12-0G 25 to 75 12 11.94 to 12.06 5.8 40IMX70-12-0G 50 to 150 12 11.94 to 12.06 5.8 110IMY70-12-0G 2.00 x 1.60 x 0.41 inch 50.8 x 40.6 x 10.5 mm IMX4 1.30 x 0.79 x 0.33 inch 33.0 x 20.1 x 8.5 mm IMX7 Models with 14 to 15Vout, Sorted by Max Amps 4.5 to 5.5 14 N/A 0.07 DSP1N5S14 4.7 to 5.5 15 N/A 0.07 DSP1N5S15 2.00 x 1.00 x 0.42 inch 50.8 x 25.4 x 10.5 mm IMX15 2.00 x 1.50 x 0.42 inch 50.8 x 38.1 x 10.7 mm 8.4 to 36 15 N/A 0.3 20IMX4-15-8 16.8 to 75 15 N/A 0.3 40IMX4-15-8 IMY15 40 to 121 15 N/A 0.3 70IMX4-15-8 36 to 75 15 N/A 0.4 48IMS6-15-9 2.00 x 1.50 x 0.42 inch 50.8 x 38.1 x 10.7 mm 50 to 150 15 11.2 to 15.8 1.2 110IMY15-15-15-8 N/A 0.06 DSP1N5S17 Model with 17 to 24Vout 4.5 to 5.5 17 IMX70 3.00 x 2.50 x 0.50 inch 76.2 x 63.5 x 12.5 mm IMY70 3.00 x 2.50 x 0.50 inch 76.2 x 63.5 x 12.5 mm OWS 2.00 x 2.00 x 0.50 inch 50.8 x 50.8 x 12.7 mm 11 Isolated DC-DC > Thru-Hole > Dual Output Unsigned output voltages are isolated and can be used as either + or - polarities. Thru-Hole > Dual-Output > 1/4 Brick Input Voltage Factory Set Vout Output Trim Range Max Amps Watts Model Models with Nominal 48Vin, Sorted by Factory Set Vout 36 to 75 +1.2 +3.3 1.1 to 1.3 3 to 3.6 15 15 68 QD48T012033 QD48T 36 to 75 +1.5 +1.8 1.4 to 1.7 1.6 to 2 15 15 50 QD48T015018 2.30 x 1.45 x 0.28 inch 58.4 x 36.8 x 7.2 mm 36 to 75 +1.8 +2.5 1.6 to 2 2.3 to 2.8 15 15 65 QD48T018025 36 to 75 +1.8 +3.3 1.6 to 2 3 to 3.6 15 15 77 QD48T018033 36 to 75 +2.5 +3.3 2.3 to 2.8 3 to 3.6 15 15 87 QD48T025033 36 to 75 +3.3 +5 3 to 3.6 4.5 to 5.5 15 10 100 QD48T033050 Independently-Regulated Outputs Minimal Cross-Channel Interference High-Current QD48T Products Can Replace Two Single-Output Quarter-Bricks QD48T products provide two independently-regulated high-current outputs and, in many applications, can replace two single output quarter-bricks. * Low-profile heights, with no heat sink required, minimize airflow shadowing, enhancing cooling for downstream devices. * Capability to start-up into pre-biased loads. * Rugged design withstands 100 V input transient for 100 ms. * Industry-standard footprints, pinouts, and trim equations. * Meets Basic insulation requirements of EN60950. * Also available in SMT packages; QD48S Series. Thru-Hole > Dual-Output > 1/2 Brick Input Voltage Factory Set Vout Output Trim Range Max Amps Watts Model Models with Nominal 48Vin, Sorted by Factory Set Vout HBD 2.40 x 2.28 x 0.50 inch 61.0 x 57.9 x 12.7 mm HLD 2.40 x 2.28 x 0.50 inch 61.0 x 57.9 x 12.7 mm www.power-one.com 12 36 to 72 1.8 3.3 1.6 to 2 3 to 3.6 15 15 60 HLD15ZEB 34 to 75 3.3 5 3 to 3.6 4.5 to 5.5 15 12 60 HBD060ZGE-A Isolated DC-DC > Thru-Hole > Dual Output Unsigned output voltages are isolated and can be used as either + or - polarities. Thru-Hole > Dual-Output > Non-Brick Input Voltage Factory Set Vout Output Trim Range Max Amps Watts Model Models with 3.3V and 5.1V Outputs, Sorted by Watts 8.4 to 36 DSP1 +3.3 +5.1 +3.3 +5.1 2.5 to 3.5 3.8 to 5.4 2.5 to 3.5 3.8 to 5.4 1.4 1.4 1.5 1.5 50 to 150 +3.3 +5.1 2.5 to 3.5 3.8 to 5.3 14 to 36 +3.3 +5.1 36 to 75 +3.3 +5.1 +3.3 +5.1 16.8 to 75 32 to 75 11.3 20IMX15-0503-8R 12.6 40IMX15-0503-8R 1.5 1.5 12.6 110IMY15-0503-8R 2.5 to 3.5 3.8 to 5.4 1.6 1.6 13.5 24IMS15-0503-9R 2.5 to 3.5 3.8 to 5.4 3 to 3.6 4.6 to 5.6 1.6 1.6 4.2 3.1 13.5 48IMS15-0503-9R IMS15 48IMS30-0503-9G 2.00 x 1.60 x 0.41 inch 50.8 x 40.6 x 10.5 mm 0.8 DSP1N5D5 2.00 x 2.00 x 0.37 inch 50.8 x 50.8 x 9.4 mm 3.5 20IMX4-0505-8 IMX4 3.5 40IMX4-0505-8 1.30 x 0.79 x 0.33 inch 33.0 x 20.1 x 8.5 mm 3.5 70IMX4-0505-8 30 8.4 to 36 16.8 to 75 40 to 121 18 to 36 8.4 to 36 16.8 to 75 40 to 121 60 to 150 8.4 to 36 14 to 36 16.8 to 75 36 to 75 50 to 150 +5 -5 +5 -5 +5 -5 +5 -5 +5 -5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 3.8 to 5.2 3.8 to 5.2 3.8 to 5.2 3.8 to 5.2 3.8 to 5.2 3.8 to 5.2 3.8 to 5.2 3.8 to 5.2 3.8 to 5.3 3.8 to 5.3 3.8 to 5.3 3.8 to 5.3 3.8 to 5.3 3.8 to 5.3 3.8 to 5.3 3.8 to 5.3 3.8 to 5.2 3.8 to 5.2 IMS6 1.3 x 0.79 x 0.33 inch 33 x 20 x 8.5 mm IMS30 Models with 5V Both Outputs, Sorted by Watts 4.5 to 5.5 0.77 x 0.40 x 0.27 inch 19.6 x 10.2 x 6.9 mm 0.07 0.07 0.3 0.3 0.3 0.3 0.3 0.3 0.5 0.5 0.6 0.6 0.7 0.7 0.7 0.7 0.7 0.7 1.3 1.3 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 IMX7 2.00 x 1.00 x 0.42 inch 50.8 x 25.4 x 10.5 mm 5 24IMS6-0505-9 6 20IMX7-05-05-8 7 40IMX7-05-05-8 7 70IMX7-05-05-8 7 110IMX7-05-05-8 IMY15 13 20IMX15-05-05-8 2.00 x 1.50 x 0.42 inch 50.8 x 38.1 x 10.7 mm 14 24IMS15-05-05-9 14 40IMX15-05-05-8 14 48IMS15-05-05-9 14 110IMY15-05-05-8 IMX15 2.00 x 1.50 x 0.42 inch 50.8 x 38.1 x 10.7 mm 13 Isolated DC-DC > Thru-Hole > Dual Output Unsigned output voltages are isolated and can be used as either + or - polarities. Thru-Hole > Dual-Output > Non-Brick Input Voltage DGP12 2.02 x 2.02 x 0.45 inch 51.3 x 51.3 x 11.4 mm 4.5 to 5.5 DSP1 16.8 to 75 0.77 x 0.40 x 0.27 inch 19.6 x 10.2 x 6.9 mm 8.4 to 36 18 to 36 IMS6 16.8 to 75 40 to 121 60 to 150 IMS15 2.00 x 1.60 x 0.41 inch 50.8 x 40.6 x 10.5 mm Output Trim Range Max Amps Watts Model Models with 12V Both Outputs, Sorted by Watts 8.4 to 36 1.3 x 0.79 x 0.33 inch 33 x 20 x 8.5 mm Factory Set Vout 8.4 to 36 16.8 to 75 IMX4 36 to 75 1.25 x 0.8 x 0.33 inch 32 x 20 x 8.5 mm 50 to 150 +12 -12 +12 -12 +12 -12 12 12 +12 -12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 N/A N/A N/A N/A N/A N/A 9 to 12.6 9 to 12.6 N/A N/A 9 to 12.6 9 to 12.6 9 to 12.6 9 to 12.6 9 to 12.6 9 to 12.6 9 to 12.6 9 to 12.6 9 to 12.6 9 to 12.6 9 to 12.6 9 to 12.6 9 to 12.6 9 to 12.6 0.04 0.04 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 1 DSP1N5D12 4 20IMX4-1212-8 4 40IMX4-1212-8 6 20IMX7-12-12-8 6 24IMS6-1212-9 7 40IMX7-12-12-8 7 70IMX7-12-12-8 7 110IMX7-12-12-8 15.6 20IMX15-12-12-8 16.8 40IMX15-12-12-8 16.8 48IMS15-12-12-9 16.8 110IMY15-12-12-8 N/A N/A 0.04 0.04 1 DSP1N5D14 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.4 0.4 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 4.2 20IMX4-1515-8 4.2 40IMX4-1515-8 6 20IMX7-15-15-8 7 40IMX7-15-15-8 7 70IMX7-15-15-8 7 110IMX7-15-15-8 12 DGP12U5D15 15 20IMX15-15-15-8 16.8 24IMS15-15-15-9 16.8 40IMX15-15-15-8 16.8 48IMS15-15-15-9 16.8 110IMY15-15-15-8 Model with 14V Both Outputs IMX7 2.00 x 1.00 x 0.42 inch 50.8 x 25.4 x 10.5 mm 4.5 to 5.5 Models with 15V Both Outputs, Sorted by Watts 8.4 to 36 IMX15 16.8 to 75 2.00 x 1.50 x 0.42 inch 50.8 x 38.1 x 10.7 mm 8.4 to 36 16.8 to 75 IMY15 2.00 x 1.50 x 0.42 inch 50.8 x 38.1 x 10.7 mm +14 -14 40 to 121 60 to 150 3.5 to 16 8.4 to 36 14 to 36 16.8 to 75 www.power-one.com 36 to 75 14 50 to 150 +15 -15 +15 -15 15 15 15 15 15 15 15 15 +15 -15 15 15 15 15 15 15 15 15 15 15 N/A N/A N/A N/A 11.2 to 15.8 11.2 to 15.8 11.2 to 15.8 11.2 to 15.8 11.2 to 15.8 11.2 to 15.8 11.2 to 15.8 11.2 to 15.8 13.5 to 16.5 13.5 to 16.5 11.3 to 15.8 11.3 to 15.8 11.3 to 15.8 11.3 to 15.8 11.3 to 15.8 11.3 to 15.8 11.3 to 15.8 11.3 to 15.8 11.2 to 15.8 11.2 to 15.8 Isolated DC-DC > Thru-Hole > Dual Output Unsigned output voltages are isolated and can be used as either + or - polarities. Thru-Hole > Dual-Output > Non-Brick Input Voltage Factory Set Vout Output Trim Range Max Amps Watts Model Models with 15V Both Outputs, Sorted by Watts (Continued) DSP1 0.77 x 0.40 x 0.27 inch 19.6 x 10.2 x 6.9 mm Model with 17V Both Outputs 4.5 to 5.5 +17 -17 N/A N/A 0.03 0.03 1 DSP1N5D17 0.08 0.08 0.08 0.08 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 3.8 20IMX4-2424-8 3.8 40IMX4-2424-8 6 20IMX7-24-24-8 Models with 24V Both Outputs, Sorted by Watts 8.4 to 36 16.8 to 75 8.4 to 36 16.8 to 75 40 to 121 60 to 150 8.4 to 36 14 to 36 16.8 to 75 36 to 75 50 to 150 +24 -24 +24 -24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 N/A N/A N/A N/A 18 to 25.2 18 to 25.2 18 to 25.2 18 to 25.2 18 to 25.2 18 to 25.2 18 to 25.2 18 to 25.2 18 to 25.2 18 to 25.2 18 to 25.2 18 to 25.2 18 to 25.2 18 to 25.2 18 to 25.2 18 to 25.2 18 to 25.2 18 to 25.2 IMS15 2.00 x 1.60 x 0.41 inch 50.8 x 40.6 x 10.5 mm IMX4 1.25 x 0.8 x 0.33 inch 32 x 20 x 8.5 mm 7 40IMX7-24-24-8 7 70IMX7-24-24-8 7 110IMX7-24-24-8 IMX7 15.4 20IMX15-24-24-8 2.00 x 1.00 x 0.42 inch 50.8 x 25.4 x 10.5 mm 16.8 24IMS15-24-24-9 16.8 40IMX15-24-24-8 16.8 48IMS15-24-24-9 16.8 110IMY15-24-24-8 IMX15 2.00 x 1.50 x 0.42 inch 50.8 x 38.1 x 10.7 mm IMY15 2.00 x 1.50 x 0.42 inch 50.8 x 38.1 x 10.7 mm 15 Isolated DC-DC > Thru-Hole > Triple Output Unsigned output voltages are isolated and can be used as either + or - polarities. Thru-Hole > Triple-Output > Non-Brick Input Voltage Factory Set Vout Output Trim Range Max Amps Watts Model Models with Three 5V Outputs, Sorted by Input Voltage IMX35 9 to 36 5 5 5 4.2 to 5.2 4.2 to 5.2 4.2 to 5.2 1.4 1.4 2.7 35 20IMX35D05D05-8 18 to 75 5 5 5 4.2 to 5.2 4.2 to 5.2 4.2 to 5.2 1.4 1.4 2.8 35 40IMX35D05D05-8 40 to 121 5 5 5 4.2 to 5.2 4.2 to 5.2 4.2 to 5.2 1.4 1.4 2.8 35 70IMX35D05D05-8 60 to 150 5 5 5 4.2 to 5.2 4.2 to 5.2 4.2 to 5.2 1.4 1.4 2.8 35 110IMX35D05D05-8 3.00 x 2.50 x 0.41 inch 76.2 x 63.5 x 10.4 mm 1500 VDC Isolation Extremely Wide Input Voltage Ranges Models with Two 5V and One 12V Output, Sorted by Input Voltage 9 to 36 5 5 12 4.2 to 5.2 4.2 to 5.2 10.2 to 12.6 1.4 1.4 1.3 35 20IMX35D05D12-8 18 to 75 5 5 12 4.2 to 5.2 4.2 to 5.2 10.2 to 12.6 1.4 1.4 1.4 35 40IMX35D05D12-8 40 to 121 5 5 12 4.2 to 5.2 4.2 to 5.2 10.2 to 12.6 1.4 1.4 1.4 35 70IMX35D05D12-8 60 to 150 5 5 12 4.2 to 5.2 4.2 to 5.2 10.2 to 12.6 1.4 1.4 1.4 35 110IMX35D05D12-8 Models with Two 5V and One 15V Output, Sorted by Input Voltage 9 to 36 5 5 15 4.2 to 5.2 4.2 to 5.2 12.8 to 15.8 1.4 1.4 1.1 35 20IMX35D05D15-8 18 to 75 5 5 15 4.2 to 5.2 4.2 to 5.2 12.8 to 15.8 1.4 1.4 1.2 35 40IMX35D05D15-8 40 to 121 5 5 15 4.2 to 5.2 4.2 to 5.2 12.8 to 15.8 1.4 1.4 1.2 35 70IMX35D05D15-8 60 to 150 5 5 15 4.2 to 5.2 4.2 to 5.2 12.8 to 15.8 1.4 1.4 1.2 35 110IMX35D05D15-8 IMX35 outputs can be paralleled and stacked to provide additional voltage/current combinations. Please download the IMX35 data sheet for further details. www.power-one.com 16 Isolated DC-DC > Thru-Hole > Triple Output Unsigned output voltages are isolated and can be used as either + or - polarities. Thru-Hole > Triple-Output > Non-Brick DGP20 Input Voltage Factory Set Vout Output Trim Range Max Amps Watts Model 2.02 x 2.02 x 0.45 inch 51.3 x 51.3 x 11.4 mm Models with One 5V and Two 12V Outputs, Sorted by Watts 9 to 36 5 12 12 4.2 to 5.2 10.2 to 12.6 10.2 to 12.6 2.7 0.7 0.7 35 20IMX35D05D12-8 18 to 75 5 12 12 4.2 to 5.2 10.2 to 12.6 10.2 to 12.6 2.8 0.7 0.7 35 40IMX35D05D12-8 40 to 121 5 12 12 4.2 to 5.2 10.2 to 12.6 10.2 to 12.6 2.8 0.7 0.7 35 70IMX35D05D12-8 60 to 150 5 12 12 4.2 to 5.2 10.2 to 12.6 10.2 to 12.6 2.8 0.7 0.7 35 110IMX35D05D12-8 IMX35 Models with One 5V and Two 15V Outputs, Sorted by Watts 18 to 36 +5 +15 -15 N/A N/A N/A 2.5 0.2 0.2 20 DGP20E24T5/15 9 to 36 5 15 15 4.2 to 5.2 12.8 to 15.8 12.8 to 15.8 2.7 0.6 0.6 35 20IMX35D05D15-8 18 to 75 5 15 15 4.2 to 5.2 12.8 to 15.8 12.8 to 15.8 2.8 0.6 0.6 35 40IMX35D05D15-8 40 to 121 5 15 15 4.2 to 5.2 12.8 to 15.8 12.8 to 15.8 2.8 0.6 0.6 35 70IMX35D05D15-8 60 to 150 5 15 15 4.2 to 5.2 12.8 to 15.8 12.8 to 15.8 2.8 0.6 0.6 35 110IMX35D05D15-8 3.00 x 2.50 x 0.41 inch 76.2 x 63.5 x 10.4 mm 1500 VDC Isolation Extremely Wide Input Voltage Ranges Triple-output configurations of this quad-output series utilize two outputs in parallel Continued on Next Page 17 Isolated DC-DC > Thru-Hole > Triple & Quad Output Unsigned output voltages are isolated and can be used as either + or - polarities. Thru-Hole > Triple-Output > Non-Brick Input Voltage Factory Set Vout Output Trim Range Max Amps Watts Model Models with Three 12V Outputs, Sorted by Input Voltage IMX35 9 to 36 12 12 12 10.2 to 12.6 10.2 to 12.6 10.2 to 12.6 0.7 0.7 1.3 35 20IMX35D12D12-8 18 to 75 12 12 12 10.2 to 12.6 10.2 to 12.6 10.2 to 12.6 0.7 0.7 1.4 35 40IMX35D12D12-8 40 to 121 12 12 12 10.2 to 12.6 10.2 to 12.6 10.2 to 12.6 0.7 0.7 1.4 35 70IMX35D12D12-8 60 to 150 12 12 12 10.2 to 12.6 10.2 to 12.6 10.2 to 12.6 0.7 0.7 1.4 35 110IMX35D12D12-8 3.00 x 2.50 x 0.41 inch 76.2 x 63.5 x 10.4 mm 1500 VDC Isolation Extremely Wide Input Voltage Ranges Independent Outputs Can Be Used in Series or Parallel Models with Three 15V Outputs, Sorted by Input Voltage 9 to 36 15 15 15 12.8 to 15.8 12.8 to 15.8 12.8 to 15.8 0.6 0.6 1.1 35 20IMX35D15D15-8 18 to 75 15 15 15 12.8 to 15.8 12.8 to 15.8 12.8 to 15.8 0.6 0.6 1.2 35 40IMX35D15D15-8 40 to 121 15 15 15 12.8 to 15.8 12.8 to 15.8 12.8 to 15.8 0.6 0.6 1.2 35 70IMX35D15D15-8 60 to 150 15 15 15 12.8 to 15.8 12.8 to 15.8 12.8 to 15.8 0.6 0.6 1.2 35 110IMX35D15D15-8 Thru-Hole > Quad-Output > Non-Brick Input Voltage Factory Set Vout Output Trim Range Max Amps Watts Model Models with Four 5V Outputs, Sorted by Input Voltage www.power-one.com 18 9 to 36 5 5 5 5 4.2 to 5.2 4.2 to 5.2 4.2 to 5.2 4.2 to 5.2 1.35 1.35 1.35 1.35 27 20IMX35D05D05-8 18 to 75 5 5 5 5 4.2 to 5.2 4.2 to 5.2 4.2 to 5.2 4.2 to 5.2 1.4 1.4 1.4 1.4 28 40IMX35D05D05-8 40 to 121 5 5 5 5 4.2 to 5.2 4.2 to 5.2 4.2 to 5.2 4.2 to 5.2 1.4 1.4 1.4 1.4 28 70IMX35D05D05-8 60 to 150 5 5 5 5 4.2 to 5.2 4.2 to 5.2 4.2 to 5.2 4.2 to 5.2 1.4 1.4 1.4 1.4 28 110IMX35D05D05-8 Isolated DC-DC > Thru-Hole > Quad Output Unsigned output voltages are isolated and can be used as either + or - polarities. Thru-Hole > Quad-Output > Non-Brick Input Voltage Factory Set Vout Output Trim Range Max Amps Watts Model 20IMX35D05D12-8 Models with Two 5V and Two 12V Outputs, Sorted by Input Voltage 9 to 36 5 12 12 5 4.2 to 5.2 10.2 to 12.6 10.2 to 12.6 4.2 to 5.2 1.35 0.65 0.65 1.35 29 18 to 75 5 12 12 5 4.2 to 5.2 10.2 to 12.6 10.2 to 12.6 4.2 to 5.2 1.4 0.7 0.7 1.4 30 40IMX35D05D12-8 40 to 121 5 12 12 5 4.2 to 5.2 10.2 to 12.6 10.2 to 12.6 4.2 to 5.2 1.4 0.7 0.7 1.4 30 70IMX35D05D12-8 60 to 150 5 12 12 5 4.2 to 5.2 10.2 to 12.6 10.2 to 12.6 4.2 to 5.2 1.4 0.7 0.7 1.4 30 110IMX35D05D12-8 IMX35 3.00 x 2.50 x 0.41 inch 76.2 x 63.5 x 10.4 mm 1500 VDC Isolation Extremely Wide Input Voltage Ranges Independent Outputs Can Be Used in Series or Parallel Models with Two 5V and Two 15V Outputs, Sorted by Input Voltage 9 to 36 5 15 15 5 4.2 to 5.2 12.8 to 15.8 12.8 to 15.8 4.2 to 5.2 1.35 0.55 0.55 1.35 30 20IMX35D05D15-8 18 to 75 5 15 15 5 4.2 to 5.2 12.8 to 15.8 12.8 to 15.8 4.2 to 5.2 1.4 0.6 0.6 1.4 32 40IMX35D05D15-8 40 to 121 5 15 15 5 4.2 to 5.2 12.8 to 15.8 12.8 to 15.8 4.2 to 5.2 1.4 0.6 0.6 1.4 32 70IMX35D05D15-8 60 to 150 5 15 15 5 4.2 to 5.2 12.8 to 15.8 12.8 to 15.8 4.2 to 5.2 1.4 0.6 0.6 1.4 32 110IMX35D05D15-8 Models with Four 12V Outputs, Sorted by Input Voltage 9 to 36 12 12 12 12 10.2 to 12.6 10.2 to 12.6 10.2 to 12.6 10.2 to 12.6 0.65 0.65 0.65 0.65 31 20IMX35D12D12-8 18 to 75 12 12 12 12 10.2 to 12.6 10.2 to 12.6 10.2 to 12.6 10.2 to 12.6 0.7 0.7 0.7 0.7 34 40IMX35D12D12-8 40 to 121 12 12 12 12 10.2 to 12.6 10.2 to 12.6 10.2 to 12.6 10.2 to 12.6 0.7 0.7 0.7 0.7 34 70IMX35D12D12-8 60 to 150 12 12 12 12 10.2 to 12.6 10.2 to 12.6 10.2 to 12.6 10.2 to 12.6 0.7 0.7 0.7 0.7 34 110IMX35D12D12-8 19 Isolated DC-DC > Thru-Hole > Quad Output Unsigned output voltages are isolated and can be used as either + or - polarities. Thru-Hole > Quad-Output > Non-Brick Input Voltage Factory Set Vout Output Trim Range Max Amps Watts Model Models with Four 15V Outputs, Sorted by Input Voltage IMX35 9 to 36 15 15 15 15 12.8 to 15.8 12.8 to 15.8 12.8 to 15.8 12.8 to 15.8 0.55 0.55 0.55 0.55 33 20IMX35D15D15-8 18 to 75 15 15 15 15 12.8 to 15.8 12.8 to 15.8 12.8 to 15.8 12.8 to 15.8 0.6 0.6 0.6 0.6 35 40IMX35D15D15-8 40 to 121 15 15 15 15 12.8 to 15.8 12.8 to 15.8 12.8 to 15.8 12.8 to 15.8 0.6 0.6 0.6 0.6 35 70IMX35D15D15-8 60 to 150 15 15 15 15 12.8 to 15.8 12.8 to 15.8 12.8 to 15.8 12.8 to 15.8 0.6 0.6 0.6 0.6 35 110IMX35D15D15-8 3.00 x 2.50 x 0.41 inch 76.2 x 63.5 x 10.4 mm 1500 VDC Isolation Extremely Wide Input Voltage Ranges Independent Outputs Can Be Used in Series or Parallel Thru-Hole > Input Filters Max Current (Amps) www.power-one.com 20 Max Input Voltage (VDC) Mounting Meets Conducted Part Number 5 100 Through-Hole FCC Class B FC100V5A 10 100 Through-Hole FCC Class B FC100V10A 20 100 Through-Hole FCC Class B FC100V20A Isolated DC-DC > SMT > Single-Output Unsigned output voltages are isolated and can be used as either + or - polarities. SMT > Single-Output > 1/8 Brick Input Voltage Factory Set Vout Output Trim Range Max Amps Model Models with Nominal 24Vin, Sorted by Factory Set Vout 18 to 36 5 4 to 5.5 10 SQ24S10050 18 to 36 6 4.8 to 6.6 8 SQ24S08060 Q24S & Q48S 18 to 36 12 9.6 to 13.2 4 SQ24S04120 19 to 36 15 12 to 16.5 3.3 SQ24S03150 2.30 x 1.45 x 0.26 inch 58.4 x 36.8 x 6.6 mm Models with Nominal 48Vin, Sorted by Factory Set Vout 36 to 75 1.2 1.1 to 1.3 15 SQ48S15012 36 to 75 1.5 1.2 to 1.6 15 SQ48S15015 36 to 75 1.8 1.5 to 1.9 15 SQ48S15018 36 to 75 2 1.6 to 2.2 15 SQ48S15020 36 to 75 2.5 2 to 2.7 15 SQ48S15025 QL48S 2.30 x 1.45 x 0.26 inch 58.4 x 36.8 x 6.6 mm 36 to 75 3.3 2.7 to 3.6 15 SQ48S15033 36 to 75 3.3 2.7 to 3.6 20 SQM48S20033 36 to 75 5 4 to 5.5 10 SQ48S10050 36 to 75 6 4.8 to 6.6 8 SQ48S08060 SMT > Single-Output > 1/4 Brick Input Voltage Factory Set Vout Output Trim Range QM48S 2.30 x 1.45 x 0.28 inch 58.4 x 36.8 x 7.1 mm Max Amps Model Models with Nominal 24Vin, Sorted by Factory Set Vout 18 to 36 3.3 2.7 to 3.6 30 Q24S30033 18 to 36 5 4 to 5.5 15 Q24S15050 Models with Nominal 48Vin, Sorted by Factory Set Vout 36 to 75 1.2 1.1 to 1.3 30 QL48S30012 36 to 75 1.5 1.2 to 1.6 25 Q48S25015 SQ24S 2.30 x 0.90 x 0.26 inch 58.4 x 22.8 x 6.6 mm 36 to 75 1.5 1.2 to 1.6 30 Q48S30015 36 to 75 1.8 1.5 to 1.9 25 Q48S25018 36 to 75 1.8 1.5 to 1.9 30 Q48S30018 36 to 75 2 1.6 to 2.2 25 Q48S25020 36 to 75 2 1.6 to 2.2 30 Q48S30020 36 to 75 2.5 2 to 2.7 25 Q48S25025 36 to 75 2.5 2 to 2.7 30 Q48S30025 36 to 75 3.3 2.7 to 3.6 25 Q48S25033 SQ48S 36 to 75 5 4 to 5.5 15 Q48S15050 36 to 75 12 9.6 to 13.2 8 Q48S08120 2.30 x 0.90 x 0.26 inch 58.4 x 22.8 x 6.6 mm SQM48S 2.30 x 0.90 x 0.28 inch 58.4 x 22.8 x 7.1 mm 21 Isolated DC-DC > SMT > Single-Output & Dual Output Unsigned output voltages are isolated and can be used as either + or - polarities. SMT > Single-Output > Non-Brick Input Voltage Factory Set Vout Output Trim Range Max Amps Model NVS0.9CE-M6 Models with 9 to 36Vin, Sorted by Factory Set Vout NVS 1.30 x 0.81 x 0.33 inch 33 x 20.6 x 8.5 mm 9 to 36 3.3 N/A 0.9 9 to 36 5 N/A 0.7 NVS0.7CG-M6 9 to 36 12 N/A 0.3 NVS0.3CH-M6 9 to 36 15 N/A 0.3 NVS0.3CJ-M6 Models with 18 to 36Vin, Sorted by Factory Set Vout 18 to 36 5 N/A 1 NVS01YG-M6 18 to 36 12 N/A 0.5 NVS0.5YH-M6 18 to 36 15 N/A 0.4 NVS0.4YJ-M6 Models with Ultra-Wide Input, Sorted by Factory Set Vout 18 to 75 3.3 N/A 0.9 NVS0.9EE-M6 18 to 75 5 N/A 0.7 NVS0.7EG-M6 18 to 75 12 N/A 0.3 NVS0.3EH-M6 18 to 75 15 N/A 0.3 NVS0.3EJ-M6 Models with Nominal 48Vin and 1.5 to 15Vout, Sorted by Factory Set Vout 36 to 75 5 N/A 1 36 to 75 5 4.5 to 5.5 2 NVS01ZG-M6 NDS02ZG-M6 36 to 75 12 N/A 0.5 NVS0.5ZH-M6 36 to 75 15 N/A 0.4 NVS0.4ZJ-M6 SMT > Dual-Output > 1/4 Brick Input Voltage Factory Set Vout Output Trim Range Max Amps Watts Model 77 QD48S018033 77 QD48S018050 100 QD48S033050 Models with Nominal 48Vin, Sorted by Factory Set Vout 36 to 75 36 to 75 QD48S 2.30 x 1.45 x 0.26 inch 58.4 x 36.8 x 6.6 mm +1.8 1.6 to 2 15 +3.3 3 to 3.6 15 +1.8 +5 36 to 75 +3.3 +5 1.6 to 2 15 4.5 to 5.5 10 3 to 3.6 15 4.5 to 5.5 10 High-Current QD48S Products Can Replace Two Single-Output Quarter-Bricks www.power-one.com 22 QD48S products provide two independently-regulated high-current outputs and, in many applications, can replace two single-output quarter-bricks. * Low-profile heights, with no heat sink required, minimize airflow shadowing, enhancing cooling for downstream devices. * Capability to start-up into pre-biased loads. * Rugged design withstands 100 V input transient for 100 ms. * Industry-standard footprints, pinouts, and trim equations. * Meets Basic insulation requirements of EN60950. * Also available in through-hole packages; QD48T Series. Isolated DC-DC > SMT > Dual-Output Unsigned output voltages are isolated and can be used as either + or - polarities. SMT > Dual-Output > Non-Brick Input Voltage Factory Set Vout Output Trim Range Max Amps Watts Model 0.3 0.3 0.2 0.2 0.1 0.1 0.1 0.1 3.5 NVD0.7CGG-M6 Models with 9 to 36Vin, Sorted by Factory Set Vout 9 to 36 9 to 36 9 to 36 9 to 36 +5 -5 +12 -12 +15 -15 +24 -24 N/A N/A N/A N/A N/A N/A N/A N/A 4 NVD0.3CHH-M6 4.2 NVD0.3CJJ-M6 3.8 NVD0.2CKK-M6 0.5 0.5 0.2 0.2 0.2 0.2 5 NVD01YGG-M6 6 NVD0.5YHH-M6 6 NVD0.4YJJ-M6 0.3 0.3 0.2 0.2 0.1 0.1 0.1 0.1 3.5 NVD0.7EGG-M6 4 NVD0.3EHH-M6 4.2 NVD0.3EJJ-M6 3.8 NVD0.2EKK-M6 0.5 0.5 0.2 0.2 0.2 0.2 5 NVD01ZGG-M6 6 NVD0.5ZHH-M6 6 NVD0.4ZJJ-M6 NVD 1.30 x 0.81 x 0.33 inch 33.0 x 20.6 x 8.5 mm Models with 18 to 36Vin, Sorted by Factory Set Vout 18 to 36 18 to 36 18 to 36 +5 -5 +12 -12 +15 -15 N/A N/A N/A N/A N/A N/A Models with Ultra-Wide Input, Sorted by Factory Set Vout 18 to 75 18 to 75 18 to 75 18 to 75 +5 -5 +12 -12 +15 -15 +24 -24 N/A N/A N/A N/A N/A N/A N/A N/A Models with Nominal 48Vin, Sorted by Factory Set Vout 36 to 75 36 to 75 36 to 75 +5 -5 +12 -12 +15 -15 N/A N/A N/A N/A N/A N/A SMT > Input Filters Max Current (Amps) Max Input Voltage (VDC) Mounting Meets Conducted Part Number 4 80 SMT FCC Class B F4804A 10 50 SMT FCC Class B F2410 10 100 SMT FCC Class B F4810 23 THIS PAGE INTENTIONALLY LEFT BLANK. www.power-one.com 24 Rack-Mount Front Ends > Single Output Unsigned output voltages are isolated and can be used as either + or - polarities. Power-One offers a broad array of DPA & IBA hot-swap front ends. Chassis-mount front ends are also available and are listed in the Chassis Mount > Single Output section. Power-One's hot-swap products combine high-efficiency topologies with advanced thermal management techniques to provide industry-leading power densities. Additional features include: * Extensive I2C interface monitoring & control capabilities * Active current share with ORing FETs * Compact, low-profile packages that fit 1U-height constraints Backplane-Mounted Input Connector - AC-DC Nominal Vout 48V * Max Amps Vin Range Output Trim Range Standby Vout Power Supply Mating Shelves 31 85 to 264 VAC 44.2 to 51.8V 12V FXP1500-48G FXR-3-48 37.5 85 to 264 VAC 44.2 to 51.8V 12V FXP1800-48G FXR-3-48 125 180 to 264 or 342 to 528 VAC 45.6 to 50.4V 12V FXP6000-48-S NLA* 145 180 to 264 or 342 to 528 VAC 45.6 to 50.4V 12V FXP7000-48-S NLA* Shelves No Longer Available FXP1500/1800 FXP6000/7000 12 x 5.6 x 1.6 inch 304.8 x 142.2 x 40.6 mm 16.96 x 8 x 5 inch 430.8 x 203.2 x 127 mm Advanced topologies deliver up to 90% efficiency. High density design: up to 14 W/in3 Current-share for up to 30 units Suitable for 3U or 5U height monitoring 25 Rack-Mount Front Ends > Single Output Unsigned output voltages are isolated and can be used as either + or - polarities. Front-Mounted Input Receptacle - AC-DC & DC-DC Nominal Vout 12V 24V 48V Max Amps Vin Range Output Trim Range Standby Vout Power Supply Mating Shelves 25 85 to 264 VAC N/A 12V FNP300-1012 N/A 25 40.5 to 72 VDC N/A N/A FND300-1012G N/A 36.6 90 to 264 VAC N/A 3.3V SFP450-12BG N/A 45 -40 to -75 VDC N/A 3.3V SFD550-12BG N/A 50 90 to 264 VAC 7 to 12V 12V FNP600-12 FNR-5-12 53.3 90 to 264 VAC N/A 3.3V SFP650-12BG N/A 71 36 to 75 VDC 7 to 12V 12V FND850-12RG N/A 71 36 to 75 VDC 7 to 12.3V 12V FND850-12DRG N/A 73 90 to 264 VAC 7 to 12V 12V FNP850-12 FNR-5-12 86.7 90 to 264 VAC N/A 3.3V SFP1050-12BG N/A 93.3 90 to 264 VAC N/A 3.3V SGP1200-12G N/A 93.3 90 to 264 VAC N/A 3.3V SGP1200-12RG N/A 99.2 -40 to -75 VDC N/A 3.35V SFD1200-12BG N/A 125 85 to 264 VAC 7 to 13V 12V FNP1500-12G FNR-3-12 12.5 85 to 264 VAC N/A 12V FNP300-1024 N/A 6.2 85 to 264 VAC N/A 12V FNP300-1048 N/A 21 90 to 264 VAC N/A 12V FNP1000-48 FNR-5-48 31 85 to 264 VAC 44.2 to 51.8V 12V FNP1500-48G FNR-3-48G 37.5 85 to 264 VAC 44.2 to 51.8V 12V FNP1800-48G FNR-3-48G FNP600/850/1000 FND850 11.74 x 3.3 x 1.6 inch 298.2 x 83.8 x 40.6 mm 12.4 x 3.38 x 1.6 inch 315 x 86 x 41 mm Droop current share with ORing FETs Can be used in hot-swap redundant systems Control available via GUI-driven I2C software www.power-one.com 26 SFD550 SFP450/650/1050 12.4 x 3.1 x 1.6 inch 314.5 x 78 x 40 mm Common form factor AC and DC input products Status LEDs: Input OK, Output OK, and Fault SFD1200-12BG SGP1200-12G 11.42 x 3.07 x 1.57 inch 290 x 78 x 40 mm 11.0 x 3.2 x 1.57 inch 279 x 81 x 40 mm Rack-Mount Front Ends > Single Output Front-Mounted Input Receptacle - AC-DC & DC-DC FNP1500/1800 FND300 FNP300 11 x 5.6 x 1.6 inch 279.4 x 141.2 x 40.6 mm 8.5 x 4.0 x 1.65 inch 215.9 x 101.6 x 41.9 mm High power densities, up to 18.3 W/in3 I2C voltage and current limit setting Analog output voltage setting Common form factor AC and DC input products Overtemperature, output overvoltage, and output overcurrent protections Rack-Mount Power Shelves AC-DC Power Shelves * * Up to 375 Amps per shelf configuration Shelves may be partially populated for reduced currents, or paralleled for higher currents. Vout Nominal 12V 48V Max Amps Input Range Shelf Height Width Depth Power Supply Max # of Supplies 250 85 to 264 VAC FNR-5-12 1U 19" 13" FNP600-12 5 355 85 to 264 VAC FNR-5-12 1U 19" 13" FNP850-12 5 375 85 to 264 VAC FNR-3-12 1U 19" 13" FNP1500-12G 3 62 85 to 264 VAC FNR-5-48 1U 19" 13" FNP600-48 5 93 85 to 264 VAC FNR-3-48 1U 19" 13" FNP1500-48G 3 93 85 to 264 VAC FXR-3-48 1U 19" 13" FXP1500-48G 3 105 85 to 264 VAC FNR-5-48 1U 19" 13" FNP1000-48 5 112 85 to 264 VAC FNR-3-48 1U 19" 13" FNP1800-48 3 112 85 to 264 VAC FXR-3-48 1U 19" 13" FXP1800-48G 3 27 Chassis Mount > AC-DC Unsigned output voltages are isolated and can be used as either + or - polarities. AC-DC > Single Output Factory Set Vout Output Trim Range Max Amps Input VAC Max Watts Model Models with 3.3 and 5Vout, Sorted by Vout then Max Watts BLP55 5.00 x 3.00 x 1.23 inch 127.0 x 76.2 x 31.2 mm FXC6000/7000 15.17 x 8 x 5 inch 38.5 x 20.3 x 12.7 cm 5 4.7 to 5.5 8 90 to 264 40 MAP40-1005 5 4.8 to 5.5 11 85 to 264 55 BLP55-1005 5 4.8 to 5.5 26 90 to 264 130 MAP130-1005 5 4.5 to 5.5 50 85 to 264 250 PFC250-1005 Models with 12 and 15Vout, Sorted by Vout then Max Watts 12 11.4 to 13.2 4.5 85 to 264 55 BLP55-1012 12 11.4 to 15.8 5 90 to 264 55 MAP55-1012 12 11.5 to 15.5 7.5 90 to 264 80 MAP80-1012 12 11.2 to 15.8 10 85 to 264 110 MAP110-1012 12 11.8 to 12.2 10.5 90 to 264 125 MPB125-1012 12 11.4 to 15.8 12 90 to 264 130 MAP130-1012 12 11 to 16 12.5 85 to 264 140 MAP140-1012 12 11.6 to 16 17 85 to 264 200 MPU200-1012G 12 10.8 to 13.5 21 85 to 264 250 PFC250-1012 12 10.8 to 13.5 30 85 to 264 375 PFC375-1012 15 13.5 to 18.3 17 85 to 264 250 PFC250-1015 Models with 24 and 28Vout, Sorted by Vout then Max Watts MAP40 5.00 x 3.00 x 1.16 inch 127.0 x 76.2 x 29.5 mm 24 22.8 to 26.4 2.3 85 to 264 55 BLP55-1024 24 23.5 to 28.5 2.5 90 to 264 55 MAP55-1024 24 23 to 29 3.8 90 to 264 80 MAP80-1024 24 22.8 to 29.2 5 85 to 264 110 MAP110-1024 24 22.5 to 30 6.2 90 to 264 130 MAP130-1024 24 22.8 to 29.2 6.3 85 to 264 140 MAP140-1024 24 22.8 to 29.2 8.3 85 to 264 200 MPU200-1024G 24 21.6 to 26.4 10.5 85 to 264 250 PFC250-1024 24 21.6 to 26.4 15 85 to 264 375 PFC375-1024 24 21.6 to 26.4 21 85 to 264 500 PFC500-1024 AC-DC > Single Output Factory Set Vout Output Trim Range Max Amps Input VAC Max Watts Model Models with 48Vout, Sorted by Max Watts MAP55 48 45 to 56 4.2 85 to 264 200 MPU200-1048G 6.00 x 3.27 x 1.60 inch 152.4 x 83.1 x 40.6 mm 48 46 to 56 10.4 85 to 264 500 PFC500-1048 48 45.6 to 50.4 125 180 to 528 6000 FXC6000-48-S MAP80 48 45.6 to 50.4 145 180 to 528 7000 FXC7000-48-S 7.20 x 4.20 x 1.80 inch 182.9 x 106.7 x 45.7 mm MAP130 8.50 x 4.50 x 2.00 inch 215.9 x 114.3 x 50.8 mm www.power-one.com 28 Additional single-output products are described in the Rack-Mount Front-End and Modular Solutions sections. Alpha-sorted graphics and dimensions augment model listings from both pages. Chassis Mount > AC-DC Unsigned output voltages are isolated and can be used as either + or - polarities. AC-DC > Dual Output Factory Set Vout Output Trim Range Max Amps Input VAC Max Watts Model Sorted by Factory Set Vout +5 +12 N/A N/A 25 0.5 90 to 264 125 MPB125-2005 +12 12 N/A N/A 10.5 0.5 90 to 264 125 MPB125-2012 +12 12 N/A N/A 12.5 0.5 90 to 264 150 MPB150-2012G 7.00 x 4.30 inch 177.8 x 109.2 mm +24 12 N/A N/A 6 0.5 90 to 264 150 MPB150-2024G MAP110: 1.97 inch height MAP140: 1.80 inch height +48 12 N/A N/A 2.6 0.5 90 to 264 125 MPB125-2048 +48 12 N/A N/A 3.1 0.5 90 to 264 150 MPB150-2048G MAP110/MAP140 MPB125/MPB150 5.00 x 3.00 x 1.25 inch 127.0 x 76.2 x 31.8 mm MPU200 8.00 x 4.20 x 1.50 inch 203 x 107 x 38 mm PFC250 8.50 x 4.75 x 2.00 inch 215.9 x 120.7 x 50.8 mm PFC375/PFC500 9.00 x 5.00 x 2.50 inch 228.6 x 127.0 x 63.5 mm 29 Chassis Mount > AC-DC Unsigned output voltages are isolated and can be used as either + or - polarities. AC-DC > Triple Output Factory Set Vout Output Trim Range Max Amps Input VAC Max Watts Model One 3.3V, One 5V, and One 12V Output BLP55 5.00 x 3.00 x 1.23 inch 127.0 x 76.2 x 31.2 mm +3.3 +5 +12 N/A N/A N/A 5 2.5 0.7 85 to 264 37 BLP55-3300 +3.3 +5 +12 3.1 to 3.8 5 to 5.5 N/A 35 20 2 85 to 264 150 MPU150-3300 90 to 264 40 MAP40-3105 Model with Two 5V and One 12V Output +5 -5 +12 4.7 to 5.8 N/A N/A 3 0.5 2 Models with One 5V and Two 12V Outputs, Sorted by Max Watts MAP40 5.00 x 3.00 x 1.16 inch 127.0 x 76.2 x 29.5 mm +5 +12 -12 4.7 to 5.8 N/A N/A 5 1 0.3 90 to 264 40 MAP40-3500 +5 +12 -12 N/A N/A N/A 5 2.5 0.7 85 to 264 55 BLP55-3000 +5 +12 -12 N/A N/A N/A 16.5 5 0.5 90 to 264 125 MPB125-3000 40 MAP40-3101 Model with One 5V, One 12V, and One 24V Output; Sorted by Max Watts MAP140 +5 +24 -12 4.8 to 5.2 N/A N/A 3 1 0.3 90 to 264 7.00 x 4.30 x 1.80 inch 177.8 x 109.2 x 45.7 mm AC-DC > Quad Output Factory Set Vout Output Trim Range Max Amps Input VAC Max Watts Model Models Under 100 Watts, Sorted by Max Watts MPB125 5.00 x 3.00 x 1.25 inch 127.0 x 76.2 x 31.8 mm MPU150 8.00 x 4.20 x 1.50 inch 203.2 x 106.7 x 38.1 mm www.power-one.com 30 +5 +24 -12 +12 4.7 to 5.6 N/A N/A N/A 6 1.5 0.5 0.5 90 to 264 55 MAP55-4001 +5 +24 -15 +15 4.7 to 5.6 N/A N/A N/A 6 1.5 0.5 0.5 90 to 264 55 MAP55-4004 +5 +12 -5 -12 4.8 to 5.5 11.5 to 12.5 N/A N/A 14 4 1 3 90 to 264 80 MAP80-4010 +5 +24 -15 +15 4.8 to 5.5 23 to 25 N/A N/A 14 2 1 1 90 to 264 80 MAP80-4004 Continued on Next Page Chassis Mount > AC-DC Unsigned output voltages are isolated and can be used as either + or - polarities. AC-DC > Quad Output Factory Set Vout Output Trim Range Max Amps Input VAC Max Watts Model Models from 110 to 125 Watts, Sorted by Max Watts then Factory Set Vout +5 +12 -12 -5 4.8 to 5.2 N/A N/A N/A 12 5 1 1 85 to 264 110 MAP110-4000 +5 +12 -12 +12 4.8 to 5.2 N/A N/A N/A 12 5 1 1 85 to 264 +5 +24 -15 +15 4.8 to 5.2 N/A N/A N/A 12 3 1 1 85 to 264 110 MAP110-4004 +12 +24 -12 +5 11.6 to 12.4 N/A N/A N/A 5 4 1 2 85 to 264 110 MAP110-4200 +3.3 +5 +12 -12 N/A N/A N/A N/A 10 15 5 0.5 90 to 264 125 MPB125-4350 MAP110 110 MAP110-4002 7.00 x 4.30 x 1.97 inch 177.8 x 109.2 x 50 mm Remote Sense on Main Outputs Optional L-Bracket & Cover MAP130 8.50 x 4.50 x 2.00 inch 215.9 x 114.3 x 50.8 mm Models from 130 to 150 Watts, Sorted by Max Watts then Factory Set Vout +5 +12 -12 +12 4.8 to 5.5 11.5 to 12.5 N/A N/A 20 5 1 1 90 to 264 130 MAP130-4002 +5 +12 -5 -12 4.8 to 5.5 N/A N/A N/A 20 5 1 3 90 to 264 130 MAP130-4010 +5 +15 -5 -15 4.8 to 5.5 14 to 16 N/A N/A 20 4 1 1 90 to 264 130 MAP130-4003 +5 +24 -12 +12 4.8 to 5.5 23 to 25 N/A N/A 20 3.5 1 1 90 to 264 130 MAP130-4001 +3.3 +5 12 12 3.1 to 3.6 5 to 5.5 10.8 to 13.2 10.8 to 13.2 30 15 3 3 85 to 264 150 MPU150-4350 +5 +3.3 12 12 5 to 5.5 3.1 to 3.6 10.8 to 13.2 10.8 to 13.2 30 15 3 3 85 to 264 150 MPU150-4530 +5 +12 12 5 5 to 5.5 10.8 to 13.2 10.8 to 13.2 5 to 5.5 30 8 3 2 85 to 264 150 MPU150-4000 Metric & SAE Mounting Inserts Power Fail Signal MPB125 5.00 x 3.00 x 1.25 inch 127.0 x 76.2 x 31.8 mm High Power Density in Industry Standard 3" x 5" Footprint Power Factor Correction Meets EN61000-3-2 MPU150 8.00 x 4.20 x 1.50 inch 203 x 107 x 38 mm Power Factor Correction Meets EN61000-3-2 31 Chassis Mount > AC-DC Unsigned output voltages are isolated and can be used as either + or - polarities. AC-DC > Quad Output Factory Set Vout Output Trim Range Max Amps Input VAC Max Watts Model Models from 200 to 400 Watts, Sorted by Max Watts MPU200 8.00 x 4.20 x 1.50 inch 203 x 107 x 38 mm PFC250 8.50 x 4.75 x 2.00 inch 215.9 x 120.7 x 50.8 mm PFC375 9.00 x 5.00 x 2.50 inch 228.6 x 127.0 x 63.5 mm www.power-one.com 32 +5 +3.3 12 12 +5 +3.3 12 12 5 to 5.5 3.1 to 3.6 10.8 to 13.2 10.8 to 13.2 5 to 5.5 3.1 to 3.5 10.8 to 13.2 10.8 to 13.2 30 15 8 4 40 20 6 3 85 to 264 200 MPU200-4530 85 to 264 250 PFC250-4530 +5 +12 12 5 4.5 to 5.5 11.3 to 12.6 11.3 to 12.6 N/A 40 10 6 3 85 to 264 375 PFC375-4000 +5 +12 12 24 4.5 to 5.5 11.3 to 12.6 11.3 to 12.6 22 to 28 40 10 6 3 85 to 264 375 PFC375-4002 +24 +5 12 12 21.5 to 26.4 4.5 to 5.5 11.4 to 12.6 11.4 to 12.6 10 10 4 4 85 to 264 375 PFC375-4200 +24 +5 15 15 21.5 to 26.4 4.5 to 5.5 14.2 to 16 13.7 to 16 10 10 4 4 85 to 264 375 PFC375-4201 Chassis Mount > AC-DC Modular Solutions AC-DC > LPM615 Modular Power Supply COMING SOON... * * * * * * * * * * * * Standard output voltages of 2 to 54 VDC Efficiencies up to 88% typical Extra-Low 1U profile: 40.64 mm Leading power density of 17 Watts/cubic inch 1 to 6 isolated outputs with full user configurability Power Factor Correction (PFC) IEC 61000-3-2 compliant 1200 or 1500 Watts of total output power Zero-load operation Single-wire current sharing Universal input Individual control signals on each module Two-year warranty 33 Linear Power Supplies > Single Output Unsigned output voltages are isolated and can be used as either + or - polarities. Nominal Vout* Max Amps Model Input 100 to 264 VAC Case Type Additional Features & Notes Models with 5Vout, Sorted by Max Amps 5 1.5 HA5-1.5/OVP-AG B A 5 3 HB5-3/OVP-AG B A, C 5 6 HC5-6/OVP-AG C A, C 5 9 HN5-9/OVP-AG N A, C 5 12 HD5-12/OVP-AG D A, C 5 18 HE5-18/OVP-AG E A, C 5 25 F5-25/OVP-AG F A, C, D, H 5 35 G5-35/OVP-AG F A, C, D, H Models with 12 to 15Vout, Sorted by Vout then Max Amps Worldwide AC Input Capabilities: 100/120/220/230/240 VAC 0.05% Output Regulation Low Output Ripple UL, CSA, and TUV Approvals Mean Time Before Failure (MTBF) in Excess of 300,000 Hours CE Marked to Low Voltage Directive 100% Burn-In 2-Year Warranty Overvoltage Protection (OVP) Standard on 5V Single Outputs; Optional for Outputs Under 48V 12 12 0.9 1.7 HA15-0.9-AG HB12-1.7-AG B B C 12 3.4 HC12-3.4-AG C C 12 5.1 HN12-5.1-AG N C 12 6.8 HD12-6.8-AG D C 12 10.2 HE12-10.2-AG E C C, D, H 12 16 F15-15-AG F 15* 0.9 HA15-0.9-AG B 15 1.5 HB15-1.5-AG B 15 3 HC15-3-AG C C 15 4.5 HN15-4.5-AG N C 15 6 HD15-6-AG D C 15 9 HE15-9-AG E C 15* 15 F15-15-AG F C, D, H C Models with 24 to 28Vout, Sorted by Vout then Max Amps 24 24 0.5 1.2 HA24-0.5-AG HB24-1.2-AG B B C 24 2.4 HC24-2.4-AG C C 24 3.6 HN24-3.6-AG N C 24 4.8 HD24-4.8-AG D C 24 7.2 HE24-7.2-AG E C C, D, H 24 12 F24-12-AG F 28* 0.5 HA24-0.5-AG B 28 1 HB28-1-AG B C 28 2 HC28-2-AG C C 28 3 HN28-3-AG N C 28 4 HD28-4-AG D C 28 6 HE28-6-AG E C 28* 10 F24-12-AG F C, D, H Models with 48Vout, Sorted by Max Amps 48 48 0.5 1 HB48-0.5-AG HC48-1-AG 48 3 HD48-3-AG D C 48 4 HE48-4-AG E C * May require jumpering or potentiometer adjustment. www.power-one.com 34 B C Linear Power Supplies > Dual Output Unsigned output voltages are isolated and can be used as either + or - polarities. Nominal Vout* Max Amps Model Input 100 to 264 VAC Case Type Additional Features & Notes Models with 5V to 15Vout, Sorted by Nominal Vout then Max Amps +5, -5 1.5, 1.5 HAA5-1.5/OVP-AG AA A +5, -5 3, 3 HBB5-3/OVP-AG BB A +5, -5 6, 6 HCC5-6/OVP-AG CC A, C 5, 12 to 15 2, 0.5 HAA512-AG AA A 5, 12 to 15 3, 1.25 HBB512-AG BB A, C 5, 12 to 15 6, 2.5 HCC512-AG CC A, C +12, -5* 1, 0.4 HAA15-0.8-AG AA C +12, -5* 1.7, 0.7 HBB15-1.5-AG BB C +12, -12 0.4, 0.4 HAD12-0.4-AG B B +12, -12 1, 1 HAA15-0.8-AG AA C +12, -12 1.7, 1.7 HBB15-1.5-AG BB C +12, -12 3.4, 3.4 HCC15-3-AG CC C +12, -12* 5, 5 HDD15-5-AG E C +12, -15* 1, 0.8 HAA15-0.8-AG AA C +12, -15* 1.7, 1.5 HBB15-1.5-AG BB C +12, -15* 3.4, 3 HCC15-3-AG CC +12, -15* 5, 5 HDD15-5-AG +15, -5* 0.8, 0.4 +15, -5* +15, -12* +15, -12* +15, -12* 15, -12* Case Type Dimensions (Inches) AA 6.50 x 4.00 x 2.10 B 4.87 x 4.00 x 2.10 BAA 10.25 x 4.00 x 2.95 BB 7.00 x 4.87 x 2.95 C 5.62 x 4.87 x 2.95 CBB 11.00 x 4.87 x 3.28 CC 9.38 x 4.87 x 3.28 CP131 11.00 x 4.87 x 3.28 D 9.00 x 4.87 x 3.28 DBB 14.25 x 4.87 x 3.38 DCC 15.00 x 4.88 x 4.55 E 14.00 x 4.87 x 3.53 F 16.75 x 4.88 x 5.00 N 7.00 x 4.87 x 3.28 C Case Type Dimensions (Millimeters) E C AA 165.10 x 101.60 x 53.34 HAA15-0.8-AG AA C B 123.70 x 101.60 x 53.34 1.5, 0.7 HBB15-1.5-AG BB C BAA 260.35 x 101.60 x 74.93 0.8, 1 HAA15-0.8-AG AA C BB 177.80 x 123.70 x 74.93 1.5, 1.7 HBB15-1.5-AG BB C C 142.75 x 123.70 x 74.93 3, 3.4 HCC15-3-AG CC C CBB 279.40 x 123.70 x 83.31 5, 5 HDD15-5-AG E C CC 238.25 x 123.70 x 83.31 CP131 279.40 x 123.70 x 83.31 Models with 15V to 24Vout, Sorted by Nominal Vout then Max Amps +15, -15 0.4, 0.4 HAD15-0.4-AG B B D 228.60 x 123.70 x 83.31 +15, -15 0.8, 0.8 HAA15-0.8-AG AA C DBB 361.95 x 123.70 x 85.85 +15, -15* 1.5, 1.5 HBB15-1.5-AG BB C DCC 381.00 x 123.95 x 115.57 +15, -15* 3, 3 HCC15-3-AG CC C E 355.60 x 123.70 x 89.66 +15, -15 5, 5 HDD15-5-AG E C F 425.50 x 123.95 x 127.00 N 177.80 x 123.70 x 83.31 A B C D Overvoltage protection, set at 6.2 V 0.4 V. Non-adjustable 3-terminal regulator. Remote sense provided. With output inhibit and parallel operation master/slave capability. With output inhibit. Adjustable 3-terminal regulator. Can be made into an isolated output by removing jumper W1. Model requires 100 LFM forced-air cooling above 75% of rated output power at 50 degrees C. +24, -24 0.6, 0.6 HAA24-0.6-AG AA +24, -24 1.2, 1.2 HBB24-1.2-AG BB +24, -24 2.4, 2.4 HCC24-2.4-AG CC * May require jumpering or potentiometer adjustment. C E F G H 35 Linear Power Supplies > Triple Output Unsigned output voltages are isolated and can be used as either + or - polarities. Dimensions (Inches) Nominal Vout* Case Type Additional Features & Notes AA 6.50 x 4.00 x 2.10 Models with 5V to 15Vout, Sorted by Nominal Vout then Max Amps B 4.87 x 4.00 x 2.10 +5, +12, -5* 2, 0.4, 0.4 BAA 10.25 x 4.00 x 2.95 5, +12, -5* 3, 1, 0.4 HTAA-16W-AG AA A HBAA-40W-AG BAA BB 7.00 x 4.87 x 2.95 +5, +12, -5* A, C 6, 1, 0.4 HCAA-60W-AG D C 5.62 x 4.87 x 2.95 A, C CBB 11.00 x 4.87 x 3.28 5, +12, -5* 6, 1.7, 0.7 HCBB-75W-AG CBB C 5, +12, -5* 8, 1.7, 0.7 CP131-AG CP131 A, C CC 9.38 x 4.87 x 3.28 5, +12, -5* 12, 1.7, 0.7 HDBB-105W-AG DBB A, C CP131 11.00 x 4.87 x 3.28 5, +12, -12 2, 0.4, 0.4 HTAA-16W-AG AA A D 9.00 x 4.87 x 3.28 5, +12, -12 3, 1, 1 HBAA-40W-AG BAA A, C DBB 14.25 x 4.87 x 3.38 +5, +12, -12 6, 1, 1 HCAA-60W-AG D A, C DCC 15.00 x 4.88 x 4.55 5, +12, -12 6, 1.7, 1.7 HCBB-75W-AG CBB C E 14.00 x 4.87 x 3.53 5, +12, -12 8, 1.7, 1.7 CP131-AG CP131 A, C F 16.75 x 4.88 x 5.00 5, +12, -12 12, 1.7, 1.7 HDBB-105W-AG DBB C N 7.00 x 4.87 x 3.28 5, +12, -12 12, 3.4, 3.4 HDCC-150W-AG DCC A, C 5, +12, -15* 2, 0.4, 0.4 HTAA-16W-AG AA A 5, +12, -15* 3, 1, 0.8 HBAA-40W-AG BAA A, C +5, +12, -15* 6, 1, 1 HCAA-60W-AG D A, C Case Type Dimensions (Millimeters) AA 165.10 x 101.60 x 53.34 5, +12, -15 6, 1.7, 1.5 HCBB-75W-AG CBB C B 123.70 x 101.60 x 53.34 5, +12, -15 8, 1.7, 1.5 CP131-AG CP131 A, C BAA 260.35 x 101.60 x 74.93 5, +12, -15* 12, 1.7, 1.5 HDBB-105W-AG DBB C 177.80 x 123.70 x 74.93 5, +12, -15 12, 3.4, 3 HDCC-150W-AG DCC A, C C 142.75 x 123.70 x 74.93 5, +15, -5* 2, 0.4, 0.4 HTAA-16W-AG AA A CBB 279.40 x 123.70 x 83.31 5, +15, -5* 3, 0.8, 0.4 HBAA-40W-AG BAA A, C 238.25 x 123.70 x 83.31 +5, +15, -5* 6, 1, 0.4 HCAA-60W-AG D A, C 279.40 x 123.70 x 83.31 5, +15, -5* 6, 1.5, 0.7 HCBB-75W-AG CBB C D 228.60 x 123.70 x 83.31 5, +15, -5* 8, 1.5, 0.7 CP131-AG CP131 A, DBB 361.95 x 123.70 x 85.85 5, +15, -5* 12, 1.5, 0.7 HDBB-105W-AG DBB C 381.00 x 123.95 x 115.57 5, +15, -12* 2, 0.4, 0.4 HTAA-16W-AG AA A 355.60 x 123.70 x 89.66 5, +15, -12* 3, 0.8, 1 HBAA-40W-AG BAA A, C F 425.50 x 123.95 x 127.00 +5, +15, -12* 6, 1, 1 HCAA-60W-AG D A, C N 177.80 x 123.70 x 83.31 5, +15, -12 6, 1.5, 1.7 HCBB-75W-AG CBB C 5, +15, -12 8, 1.5, 1.7 CP131-AG CP131 A, C 5, +15, -12* 12, 1.5, 1.7 HDBB-105W-AG DBB C 5, +15, -12 12, 3, 3.4 HDCC-150W-AG DCC A, C 5, +15, -15* 2, 0.4, 0.4 HTAA-16W-AG AA A 5, +15, -15* 3, 0.8, 0.8 HBAA-40W-AG BAA A, C +5, +15, -15* 6, 1, 1 HCAA-60W-AG D A, C 5, +15, -15 6, 1.5, 1.5 HCBB-75W-AG CBB C 5, +15, -15 8, 1.5, 1.5 CP131-AG CP131 A, C 5, +15, -15* 12, 1.5, 1.5 HDBB-105W-AG DBB C 5, +15, -15 12, 3, 3 HDCC-150W-AG DCC A, C CC CP131 DCC E B C D E F G H Model Input 100 to 264 VAC Case Type BB A Max Amps Overvoltage protection, set at 6.2 V 0.4 V. Non-adjustable 3-terminal regulator. Remote sense provided. With output inhibit and parallel operation master/slave capability. With output inhibit. Adjustable 3-terminal regulator. Can be made into an isolated output by removing jumper W1. Model requires 100 LFM forced-air cooling above 75% of rated output power at 50 degrees C. www.power-one.com 36 * May require jumpering or potentiometer adjustment. CompactPCI > AC-DC & DC Input Unsigned output voltages are isolated and can be used as either + or - polarities. Watts Height Profile Input Voltage +5V Current +3.3V Current +12V Current -12V Current CPD250-4530 250 3U 36-75 VDC 40 A 40 A 5.5 A 2A CPD500-4530G 500 6U 36-75 VDC 50 A 60 A 12 A 4A CPA250-4530 250 3U 90-264 VAC 40 A 40 A 5.5 A 2A CPA500-4530 500 6U 90-264 VAC 50 A 60 A 12 A 4A CPA550-4530 550 6U 90-264 VAC 50 A 60 A 12 A 4A Model DC Input Models AC Input Models Fully Compliant to CompactPCI Per PICMG Specifications High Density Design in an Industry-Standard Package High Efficiency Topology (>80%) Remote Sense and Active Current Share for 3 Outputs CPD250 3U x 8HP (8TE) x 6.3" (160mm) Built-In ORing FETs for Redundant Applications AC-DC Models Have Active Power Factor Correction Conformal Coating Option CPA250 Power-One's hot-swap CompactPCI power supplies are fully compliant to the PICMG 2.11 Power Interface Specification, and use a standard Positronic 47-pin connector. EDGE technology delivers up to 40 amperes on both the +5 and +3.3 volt outputs at 50 C on the 3U models, and 50 and 60 amperes respectively, on the 6U model's +5 and +3.3 volt outputs. 3U x 8HP (8TE) x 6.3" (160mm) Remote sense and active current share on the +5, +3.3, and +12 volt outputs, along with ORing FETs facilitate use in redundant, hot-swap applications. These feature-rich products meet international safety standards, and display the CE Mark for the Low Voltage Directive (LVD). CPA500/CPA550 6U x 8HP (8TE) x 6.3" (160mm) CPD500 6U x 8HP (8TE) x 6.4" (163mm) 37 Power Over Ethernet Unsigned output voltages are isolated and can be used as either + or - polarities. Power Over Ethernet > AC-DC PALS400/PALS600 10.40 x 4.00 x 1.59 inch 264.2 x 101.6 x 40.4 mm Factory Set Vout Output Trim Range Max Amps VAC Input Max Watts Model 48 12 N/A N/A 8 16 85 to 264 400 PALS400-2482 48 12 N/A N/A 9 16 85 to 264 600 PALS600-2482 Provides full compliance to IEEE 802.3AF Extremely low noise and ripple 48 VDC output has 2250 VDC isolation from the 12 VDC outputs and I2C interface 85 to 264 VAC input range with IEC61000-3-2 compliant 98% efficient PFC Full power operation to 50 C with power-derated operation to 70 C Internal diode isolation for redundant operation of up to 30 PAL's The 10.4" x 4" x 1.6" package is designed for 1U high applications and features a front panel that includes alarm and monitor LED's, AC input connector, on/off switch, integral handle, and a fan inlet. The hot-swap SSI type rear connector provides output power and access to I2C, power fail, active current share, remote sense, output good, power-supply present, and remote enable interface signals. Protection features include overload and short circuit, brownout, overtemperature/fan fail warning and shutdown, output overvoltage, and MOV input-transient. Agency approvals include UL1950, CSA 950, and EN60950 (TUV). Power Over Ethernet > DC-DC HHS04 & HHS05 2.40 x 2.28 x 0.42 inch 61.0 x 57.9 x 10.7 mm www.power-one.com 38 Input Voltage Factory Set Vout Output Trim Range Max Amps Model 36 to 75 52.5 50 to 53 3.8 HHS04Z52 36 to 75 53.7 51.2 to 54.2 4.8 HHS05Z55 Standard half-brick footprint and pinout Fully regulated output High efficiency Input-to-output isolation: 2,250 VDC Railway & Rugged Solutions Overview A Proven Track Record Extremely robust electrical and mechanical designs have enabled Power-One's broad range of railway and rugged products to establish a proven track record of industry-leading reliability, in a diverse array of transportation, communications, and industrial infrastructure applications. Isolated Cassette Style AC-DC and DC-DC A broad range of extremely flexible cassettes are available, providing from one to four outputs. Features include high efficiencies, low noise outputs, power factor correction, excellent line/load response, wide-range inputs, and extensive interface capabilities. Chassis, rack, and DIN-Rail mounting. Rack power solutions can be configured from readily available front panels and rack frames. DIN-Rail Mount, Including EN 50155 Compliant Models Single and dual output converters and battery chargers are ideal power sources for demanding applications such as building control systems, factory automation, industrial controls, instrumentation, electromagnetic drives, fans, and other DC loads. DC-DC Positive Switching Regulators These non-isolated buck-converter topology converters feature no power derating over the entire operating temperature range, no minimum load operation, wide output adjustment ranges, and -40 to 71 C extendedtemperature-range options. Rolling Stock Custom Power Capabilities Power-One has field-proven design and manufacturing capabilities for a wide range of rolling-stock power applications. Custom-product capabilities range from low-wattage solutions, such as power systems for onboard lighting and water circulation, to train-wide 55 kW auxiliary power converters. Please contact your local Power-One representative to discuss your railway power-conversion requirements. 39 DIN-Rail Mount Unsigned output voltages are isolated and can be used as either + or - polarities. LOK Series (26 to 48 Watts) LOK Series 4.49 x 3.54 x 1.5 inch 114 x 90 x 38 mm Class I equipment DC input 90 to 250 VDC Short circuit protection Adjustable output for models with R suffix Battery charger models with temperature sensor available Vout Amps VAC Input Max Watts Model 5.1 5.2 85 to 264 26 LOK4001-2RLD 12 4 85 to 264 48 LOK4301-2R 24 2 85 to 264 48 LOK4601-2R 48 1 85 to 264 48 LOK4801-2R All ratings at 50 C W Series (125 to 250 Watts) Vout 1, 2 Amps 1,2 VAC Input Max Watts Model Output Voltage Adjusts 50-110% By Specifying "R" Option W Series with PFC 5.43 x 4.49 x 4.05 inch 138 x 114 x 103 mm Class I equipment DC input 90 to 350 VDC Compact 35 mm DIN-rail snapfit design or wall mounting Ambient temperature range -6: -40 to +60 C UL 508 listed Battery charger models with temperature sensor available www.power-one.com 40 12.35 7.5 85 to 264 93 LWR1301-6E 12.35 14 85 to 264 173 LWN1301-6E 24.7 5 85 to 264 125 LWR1601-6E 24.7 10 85 to 264 250 LWN1601-6E 37 3.3 85 to 264 125 LWR1701-6E 37 6.6 85 to 264 250 LWN1701-6E 49.4 2.5 85 to 264 125 LWR1801-6E 49.4 5 85 to 264 250 LWN1801-6E 12.35, 12.35 7, 7 85 to 264 173 LWN2320-6E 24.7, 24.7 5, 5 85 to 264 250 LWN2660-6E 37, 37 3.3, 3.3 85 to 264 250 LWN2770-6E 49.4, 49.4 2.5, 2.5 85 to 264 250 LWN2880-6E All ratings at 60 C Alpha-sorted graphics and dimensions augment model listings from both pages. DIN-Rail Mount Unsigned output voltages are isolated and can be used as either + or - polarities. W Series > EN 50155 Compliant Vout 1, 2 Amps 1,2 VDC Input Max Watts Model 24.7 24.7, 24.7 5 66 to 150 120 EWR1601-0 5, 5 66 to 150 240 EWN2660-0 All ratings at 70 C X Series (375 to 496 Watts) Vout 1, 2 Amps 1, 2 VAC Input Watts Model Output Voltage Adjusts 60-110% By Specifying "R" Option 24.7 15 85 to 264 371 LXR1601-6 24.7 20 85 to 264 494 LXN1601-6 37 10 85 to 264 370 LXR1701-6 37 13.4 85 to 264 496 LXN1701-6 49.4 7.5 85 to 264 371 LXR1801-6 49.4 10 85 to 264 494 LXN1801-6 24.7, 24.7 10, 10 85 to 264 494 LXN2660-6 37, 37 6.7, 6.7 85 to 264 496 LXN2770-6 49.4, 49.4 5, 5 85 to 264 494 LXN2880-6 DIN-Rail Mount > Battery Chargers Model Battery Voltage Watts Nominal Output Voltage Nominal Output Amps LOK4140-2RLD 12 49 12.8 3.6 LWN1140-6EM1 12 140 13.8 10 LOK4240-2RLD 24 49 25.7 1.8 LWR1240-6EM1 24 115 27.3 4.2 LWN1240-6EM1 24 230 27.3 8.45 LXR1240-6M1 24 344 27.3 12.6 LXN1240-6M1 24 458 27.3 16.8 LXR1840-6M1 36 343 40.9 8.4 LXN1840-6M1 36 458 40.9 11.2 LOK4740-2RLD 48 49 51.4 0.9 LWR1740-6EM1 48 115 54.5 2.1 LWN1740-6EM1 48 230 54.5 4.2 LXR1740-6M1 48 343 54.5 6.3 LXN1740-6M1 48 458 54.5 8.4 W Series for Railway Applications Class I equipment DC input 66 to 150 VDC Safety according to IEC/EN 60950, EN 50155 compliant Ambient temp. range -40 to +71 C X Series with PFC 5.43 x 4.47 x 7.64 inch 138 x 114 x 194 mm Class I equipment DC input 90 to 350 VDC Safety: Class I equipment according to IEC/EN60950, UL 60950, EN 61010-1 Compact 35 mm DIN-rail snap-fit design or wall mounting Ambient temperature range -6: -40 to 60 C Battery charger models with temperature sensor available Please refer to data sheets for availability of EMI options, temperature sensor options, and safety agency certifications. Other battery chargers are available in Cassette packages; refer to the AC-DC Cassette Section. Contact factory for availability. 41 Non-Isolated Positive Switching Regulators Output Voltage Adjusts 0-110% in PSS Models with "R" Suffix; Output Voltage Adjusts 0-108% in All Other Models with "R" Suffix. PSR > Chassis Mount Factory Set Vout Amps VDC Input Watts +3.3 12 6 to 40 39.6 77 PSC3E12-2 PSA, PSR +5 2 8 to 80 10 74 PSR52-7 2.76 x 2.00 x 1.00 inch 70.1 x 50.8 x 25.4 mm +5 3 8 to 80 15 79 PSR53-7 +5 4 7 to 40 20 83 PSR54-7 +5 5 7 to 35 25 83 PSA55-7 +5.1 2 8 to 40 10.2 75 PSA5A2-2 +5.1 5 15 to 144 25.5 80 PSB5A4-7iR +5.1 5 7 to 35 25.5 83 PSA5A5-2 +5.1 6 8 to 80 30.6 81 PSB5A6-7iR +5.1 7 7 to 40 35.7 84 PSB5A7-7iR +5.1 8 7 to 40 40.8 81 PSB5A8-2 PSB +5.1 10 8 to 80 51 79 PSC5A10-7iR 4.17 x 2.72 x 1.27 inch 106 x 69 x 32.2 mm +5.1 11 8 to 40 56.1 79 PSC5A11-2 +5.1 12 7 to 40 61.2 83 PSC5A12-7iR +12 1.5 18 to 144 18 87 PSA121.5-7iR +12 2.5 15 to 80 30 87 PSR122.5-7 +12 3 15 to 40 36 89 PSA123-2 +12 4 18 to 144 48 89 PSB123-7iR +12 5 15 to 80 60 90 PSB125-7iR +12 6 15 to 40 72 90 PSB126-2 PSC +12 6 18 to 144 72 89 PSC126-7iR 5.94 x 3.46 x 1.27 inch 151 x 88 x 32.2 mm +12 8 15 to 80 96 90 PSC128-7iR +12 9 15 to 40 108 90 PSC129-2 +15 1.5 22 to 144 22.5 89 PSA151.5-7iR +15 2.5 19 to 80 37.5 89 PSR152.5-7 +15 3 19 to 40 45 90 PSA153-2 +15 4 22 to 144 60 90 PSB153-7iR +15 5 19 to 80 75 92 PSB155-7iR +15 6 19 to 40 90 92 PSB156-2 +15 6 22 to 144 90 90 PSC156-7iR +15 8 19 to 80 120 91 PSC158-7iR +15 9 19 to 40 135 91 PSC159-2 +24 1.5 31 to 144 36 93 PSA241.5-7iR +24 2 29 to 80 48 92 PSR242-7 +24 2.5 29 to 60 60 93 PSA242.5-2 +24 4 31 to 144 96 94 PSB243-7iR +24 5 29 to 80 120 95 PSB245-7iR +24 6 29 to 60 144 95 PSB246-2 +24 6 31 to 144 144 94 PSC246-7iR +24 8 29 to 80 192 94 PSC248-7iR +24 9 29 to 60 216 94 PSC249-2 +36 1.2 44 to 144 43.2 95 PSA361-7iR +36 2 42 to 80 72 94 PSR362-7 +36 4 44 to 144 144 95 PSB363-7iR +36 5 42 to 80 180 96 PSB365-7iR +36 6 44 to 144 216 95 PSC366-7iR +36 8 42 to 80 288 96 PSC368-7iR +48 1 58 to 144 48 95 PSA481-7iR +48 4 58 to 144 192 96 PSB483-7iR +48 6 58 to 144 288 97 PSC486-7iR www.power-one.com 42 Efficiency Model Alpha-sorted graphics and dimensions augment model listings from both pages. Non-Isolated Positive Switching Regulators Output Voltage Adjusts 0-110% in PSS Models with "R" Suffix; Output Voltage Adjusts 0-108% in All Other Models with "R" Suffix. PSR > Cassette Style Factory Set Vout Amps VDC Input Watts +5.1 10 8 to 80 51 79 PSL5A10-7R +5.1 11 8 to 40 56.1 79 PSL5A11-2R PSK +5.1 12 7 to 40 61.2 83 PSL5A12-7R +5.1 12 8 to 80 61.2 79 PSS5A12-7 6.77 x 4.37 x 3.15 inch 171.9 x 111 (3U) x 80 (16TE) mm +5.1 14 8 to 40 71.4 83 PSS5A14-2 +5.1 16 8 to 80 81.6 79 PSK5A16-7 +5.1 18 8 to 40 91.8 82 PSK5A18-2 +5.1 20 8 to 80 102 79 PSK5A20-7 +5.1 25 8 to 40 127.5 82 PSK5A25-7 +12 6 18 to 144 72 89 PSL126-7R +12 8 15 to 80 96 90 PSL128-7R +12 9 15 to 40 108 90 PSL129-2R +12 9 18 to 144 108 91 PSS129-7 +12 12 15 to 80 144 91 PSS1212-7 +12 12 18 to 144 144 91 PSK1212-7 +12 14 16 to 40 168 90 PSS1214-2 +12 16 15 to 80 192 90 PSK1216-7 +12 18 16 to 40 216 90 PSK1218-2 +12 20 15 to 80 240 90 PSK1220-7 +15 6 22 to 144 90 90 PSL156-7R +15 8 19 to 80 120 91 PSL158-7R +15 9 19 to 40 135 91 PSL159-2R +24 6 31 to 144 144 94 PSL246-7R +24 8 29 to 80 192 94 PSL248-7R +24 9 29 to 60 216 94 PSL249-2R +24 9 31 to 144 216 94 PSS249-7 +24 12 29 to 80 288 94 PSS2412-7 +24 12 31 to 144 288 94 PSK2412-7 +24 14 29 to 60 336 94 PSS2414-2 +24 16 29 to 80 384 94 PSK2416-7 +24 18 29 to 60 432 94 PSK2418-2 +24 20 29 to 80 480 94 PSK2420-7 +36 6 44 to 144 216 96 PSL366-7R +36 8 42 to 80 288 96 PSL368-7R +36 9 44 to 144 324 96 PSS369-7 +36 12 42 to 80 432 96 PSS3612-7 +36 12 44 to 144 432 96 PSK3612-7 +36 16 42 to 80 576 95 PSK3616-7 +36 20 42 to 80 720 95 PSK3620-7 +48 6 58 to 144 288 97 PSL486-7R +48 9 58 to 144 432 97 PSS489-7 +48 12 58 to 144 576 97 PSK4812-7 Efficiency Model PSL 6.83 x 4.21 x 1.44 inch 173.7 x 107 x 36.5 mm PSS 6.77 x 4.37 x 2.36 inch 171.9 x 111 (3U) x 60 (12TE) mm 43 Cassette > DC-DC Unsigned output voltages are isolated and can be used as either + or - polarities. M Series (40 to 50 Watts) M Series 6.6 x 4.4(3U) x 1.54(8 TE) inch 168 x 111 x 39 mm Output Adjustment Ranges The following adjustment ranges apply to all single-output models. Vout Low High 5.1 12 15 24 48 0 0 0 0 0 5.6 13.2 16.5 26.4 52.8 Vout 1, 2, 3 Amps 1, 2, 3 Model Input 8 to 35 VDC Model Input 14 to 70 VDC Model Input 20 to 100 VDC 5.1 8 AM1001-7R BM1001-7R FM1001-7R 12 4 AM1301-7R BM1301-7R FM1301-7R 15 3.4 AM1501-7R BM1501-7R FM1501-7R 24 2 AM1601-7R BM1601-7R FM1601-7R 48 1 AM1901-7R BM1901-7R FM1901-7R 12, 12 2, 2 AM2320-7 BM2320-7 FM2320-7 15, 15 1.7, 1.7 AM2540-7 BM2540-7 FM2540-7 5.1, 12, 12 5, 0.7, 0.7 AM3020-7 BM3020-7 FM3020-7 5.1, 15, 15 5, 0.6, 0.6 AM3040-7 BM3040-7 FM3040-7 Vout 1, 2, 3 Amps 1, 2, 3 Model Input 28 to 140 VDC Model Input 44 to 220 VDC Model Input 88 to 372 VDC 5.1 8 CM1001-7R DM1001-7R LM1001-7R 12 4 CM1301-7R DM1301-7R LM1301-7R 15 3.4 CM1501-7R DM1501-7R LM1501-7R 24 2 CM1601-7R DM1601-7R LM1601-7R 48 1 CM1901-7R DM1901-7R LM1901-7R 12, 12 2, 2 CM2320-7 DM2320-7 LM2320-7 15, 15 1.7, 1.7 CM2540-7 DM2540-7 LM2540-7 5.1, 12, 12 5, 0.7, 0.7 CM3020-7 DM3020-7 LM3020-7 5.1, 15, 15 5, 0.6, 0.6 CM3040-7 DM3040-7 LM3040-7 Safety: Class I equipment according to IEC/EN 60950, UL 60950. Extremely wide input voltage range Input over- and undervoltage lockout Output voltage control (R) and inhibit Surge and transient suppression circuitry Fully isolated outputs Outputs open- and short-circuit proof Ambient temperature range -7: -25 to 71 C No derating over temperature www.power-one.com 44 Cassette > DC-DC Unsigned output voltages are isolated and can be used as either + or - polarities. S Series (80 to 96 Watts) Vout 1, 2 Amps 1, 2 Model Input 8 to 35 VDC Model Input 14 to 70 VDC Model Input 20 to 100 VDC 5.1 16 AS1001-7R BS1001-7R FS1001-7R 12 8 AS1301-7R BS1301-7R FS1301-7R 15 6.5 AS1501-7R BS1501-7R FS1501-7R 24 4.2 AS1601-7R BS1601-7R FS1601-7R 12, 12 4, 4 AS2320-7R BS2320-7R FS2320-7R 15, 15 3.2, 3.2 AS2540-7R BS2540-7R FS2540-7R 24, 24 2, 2 AS2660-7R BS2660-7R FS2660-7R Vout 1, 2 Amps 1, 2 Model Input 28 to 140 VDC Model Input 44 to 220 VDC Model Input 67 to 385 VDC 5.1 16 CS1001-7R DS1001-7R ES1001-7R 12 8 CS1301-7R DS1301-7R ES1301-7R 15 6.5 CS1501-7R DS1501-7R ES1501-7R 24 4.2 CS1601-7R DS1601-7R ES1601-7R 12, 12 4, 4 CS2320-7R DS2320-7R ES2320-7R 15, 15 3.2, 3.2 CS2540-7R DS2540-7R ES2540-7R 24, 24 2, 2 CS2660-7R DS2660-7R ES2660-7R S Series 6.7 x 4.4(3U) x 2.4(12 TE) inch 168 x 111 x 60 mm Output Adjustment Ranges The following adjustment ranges apply to all models. Vout Low High 5.1 12 15 24 48 0 0 0 0 0 5.6 13.2 16.5 26.4 52.8 Please see the AC-DC S-Series data sheets for AC input LS models. Safety: Class I equipment according to IEC/EN 60950, UL 60950; BS, CS, DS, ES, FS comply with EN 50155 Extremely wide input voltage range Input over- and undervoltage lockout Output voltage control (R) and inhibit Surge and transient suppression circuitry Fully isolated outputs Outputs open- and short-circuit proof Ambient temperature range -7: -25 to 71 C No derating over temperature 45 Cassette > DC-DC Unsigned output voltages are isolated and can be used as either + or - polarities. Q Series (66 to 132 Watts) Vout 1, 2 Amps 1, 2 Amps TA = 50C Model Input 14.4 to 36 VDC Model Input 21.6 to 54 VDC Model Input 33.6 to 75 VDC 3.3 20 25 BQ1101-9 GQ1101-9 CQ1101-9 5.1 16 20 BQ1001-9R GQ1001-9R CQ1001-9R 5.1, 5.1 7.5, 7.5 9.5, 9.5 BQ2001-9R GQ2001-9R CQ2001-9R 12, 12 4, 4 5, 5 BQ2320-9R GQ2320-9R CQ2320-9R 15, 15 3.3, 3.3 4, 4 BQ2540-9R GQ2540-9R CQ2540-9R 24, 24 2.2, 2.2 2.75, 2.75 BQ2660-9R GQ2660-9R CQ2660-9R Output Adjustment Ranges The following adjustment ranges apply to V1 and V2 outputs. Vout 1, 2 Amps 1, 2 Amps TA = 50C Model Input 43 to 108 VDC Model Input 65 to 150 VDC Model Input 38.4 to 75 VDC Vout Low High 3.3 20 25 DQ1101-9 EQ1101-9 3.3 3.3 3.3 5.1 16 20 DQ1001-9R EQ1001-9R 5.1 12 15 24 48 4.1 7.2 9.0 14.4 28.8 5.6 13.2 16.5 26.4 52.8 5.1, 5.1 7.5, 7.5 9.5, 9.5 DQ2001-9R EQ2001-9R 12, 12 4, 4 5, 5 DQ2320-9R EQ2320-9R 48Q2320-2R 15, 15 3.3, 3.3 4, 4 DQ2540-9R EQ2540-9R 48Q2540-2R 24, 24 2.2, 2.2 2.75, 2.75 DQ2660-9R EQ2660-9R 48Q2660-2R Q Series 6.5 x 4.4(3U) x 0.8(4 TE) inch 164 x 111 x 20 mm Safety: Class I equipment according to IEC/EN 60950, UL 60950, compliant to EN 50155; 48Q Series compliant to ETS 300 132-2 Extremely slim case (4TE wide), fully enclosed Outputs, units parallel or series configurable Flexible load distribution Very high efficiency up to 90% Ambient temperature ranges: -9: -40 to 71 C -2: -10 to 50 C Output voltage control (R) and inhibit Output OK monitor Redundant operation and current sharing Extremely low inrush current, hot plug-in Extremely slim case (4 TE) fully enclosed www.power-one.com 46 48Q1001-2R Cassette > DC-DC Unsigned output voltages are isolated and can be used as either + or - polarities. K Series (102 to 150 Watts) Vout 1, 2 Amps 1, 2 Model VDC Input 5.1 20 AK1001-7R 8 to 35 12 10 AK1301-7R 8 to 35 15 8 AK1501-7R 8 to 35 24 5 AK1601-7R 8 to 35 12, 12 5, 5 AK2320-7R 8 to 35 15, 15 4, 4 AK2540-7R 8 to 35 24, 24 2.5, 2.5 AK2660-7R 8 to 35 Vout 1, 2 Amps 1, 2 Model Input 14 to 70 VDC Model Input 20 to 100 VDC 5.1 25 BK1001-7R FK1001-7R 12 12 BK1301-7R FK1301-7R 15 10 BK1501-7R FK1501-7R 24 6 BK1601-7R FK1601-7R 12, 12 6, 6 BK2320-7R FK2320-7R 15, 15 5, 5 BK2540-7R FK2540-7R 24, 24 3, 3 BK2660-7R FK2660-7R Vout 1, 2 Amps 1, 2 Model Input 28 to 140 VDC Model Input 44 to 220 VDC Model Input 67 to 385 VDC 5.1 25 CK1001-7R DK1001-7R 12 12 CK1301-7R DK1301-7R EK1301-7R LK1301-7R 15 10 CK1501-7R DK1501-7R EK1501-7R LK1501-7R 24 6 CK1601-7R DK1601-7R EK1601-7R LK1601-7R 12, 12 6, 6 CK2320-7R DK2320-7R EK2320-7R LK2320-7R 15, 15 5, 5 CK2540-7R DK2540-7R EK2540-7R LK2540-7R 24, 24 3, 3 CK2660-7R DK2660-7R EK2660-7R LK2660-7R K Series 6.6 x 4.4(3U) x 3.2(16 TE) inch 168 x 111 x 80 mm Output Adjustment Ranges The following adjustment ranges apply to all models. Vout Low High 5.1 12 15 24 0 0 0 0 5.6 13.2 16.5 26.4 Please see the AC-DC K-Series data sheets for AC input LK models. Model Input 88 to 372 VDC LK1001-7R Safety: Class I equipment according to IEC/EN 60950, UL 60950; BK, CK, DK, EK, FK comply with EN 50155. Extremely wide input voltage range Input over- and undervoltage lockout Output voltage control (R) and inhibit Surge and transient suppression circuitry Fully isolated outputs Outputs open- and short-circuit proof Ambient temperature range -7: -25 to 71 C No derating over temperature 47 Cassette > DC-DC Unsigned output voltages are isolated and can be used as either + or - polarities. P Series (90 to 194 Watts) Vout 1, 4 P Series 3.3 5.1 12 15 24 1.8 2.75 6.5 8.1 13.0 Model Input 16 to 36 VDC Model Input 33.6 to 75 VDC 12 192 120 BP1301-9R CP1301-9R 15 194 120 BP1501-9R CP1501-9R 24 192 120 BP1601-9R CP1601-9R 157 111 BP2101-9R CP2101-9R 5.1 5.1 182 122 BP2001-9R CP2001-9R 5.1 12 187 121 BP2020-9R CP2020-9R 12 12 192 120 BP2320-9R CP2320-9R 15 15 194 120 BP2540-9R CP2540-9R 24 24 192 120 BP2660-9R CP2660-9R 5.1 12, 12 187 121 BP3020-9R CP3020-9R High 5.1 15, 15 187 121 BP3040-9R CP3040-9R 3.6 5.6 13.2 16.5 26.4 5.1 24, 24 187 121 BP3060-9R CP3060-9R 5.1, 3.3 12, 12 146 90 BP4720-9R CP4720-9R 12, 12 12, 12 192 120 BP4320-9R CP4320-9R 15, 15 15, 15 192 120 BP4540-9R CP4540-9R 24, 24 24, 24 192 120 BP4660-9R CP4660-9R Vout 1, 4 Vout 2, 3 Max. Watts Nom. Watts Model Input 40 to 101 VDC Model Input 66 to 150 VDC 12 192 120 DP1301-9R EP1301-9R 15 194 120 DP1501-9R EP1501-9R 24 192 120 DP1601-9R EP1601-9R www.power-one.com 48 Nom. Watts 5.1 Output Adjustment Ranges The following adjustment ranges apply to single-output models and V1 of multi-output models. Low Max. Watts 3.3 6.5 x 4.4(3U) x 0.8(4 TE) inch 164 x 111 x 20 mm Vout Vout 2, 3 3.3 5.1 157 111 DP2101-9R EP2101-9R 5.1 5.1 182 122 DP2001-9R EP2001-9R 5.1 12 187 121 DP2020-9R EP2020-9R 12 12 192 120 DP2320-9R EP2320-9R 15 15 194 120 DP2540-9R EP2540-9R 24 24 192 120 DP2660-9R EP2660-9R 5.1 12, 12 187 121 DP3020-9R EP3020-9R 5.1 15, 15 187 121 DP3040-9R EP3040-9R 5.1 24, 24 187 121 DP3060-9R EP3060-9R 5.1, 3.3 12, 12 146 90 DP4720-9R EP4720-9R 12, 12 12, 12 192 120 DP4320-9R EP4320-9R 15, 15 15, 15 192 120 DP4540-9R EP4540-9R 24, 24 24, 24 192 120 DP4660-9R EP4660-9R Cassette > DC-DC Unsigned output voltages are isolated and can be used as either + or - polarities. P Series (90 to 194 Watts) [Continued] Vout 1, 4 Vout 2, 3 Max. Watts Nom. Watts Model Input 21.6 to 50.4 VDC 12 192 120 GP1301-9R 15 194 120 GP1501-9R 24 192 120 GP1601-9R P Series 3.3 5.1 157 111 GP2101-9R 5.1 5.1 182 122 GP2001-9R 5.1 12 187 121 GP2020-9R 12 12 192 120 GP2320-9R 15 15 194 120 GP2540-9R 24 24 192 120 GP2660-9R 5.1 12, 12 187 121 GP3020-9R Output Adjustment Ranges The following adjustment ranges apply to single-output models and V1 of multi-output models. 5.1 15, 15 187 121 GP3040-9R Vout Low High 5.1 24, 24 187 121 GP3060-9R 5.1, 3.3 12, 12 146 90 GP4720-9R 12, 12 12, 12 192 120 GP4320-9R 15, 15 15, 15 192 120 GP4540-9R 24, 24 24, 24 192 120 GP4660-9R 3.3 5.1 12 15 24 1.8 2.75 6.5 8.1 13.0 3.6 5.6 13.2 16.5 26.4 6.5 x 4.4(3U) x 0.8(4 TE) inch 164 x 111 x 20 mm Safety: Class I equipment according to IEC/EN 60950, UL 60950, EN 50155 compliant Flexible load distribution Excellent surge and transient protection Very high efficiency up to 92% Ambient temperature range -9: -40 to 71 C Parallelability Extremely low inrush current, hot plug-in Inhibit on primary side Extremely slim case (4TE wide) fully enclosed 49 Cassette > AC-DC Unsigned output voltages are isolated and can be used as either + or - polarities. Cassette > Battery Chargers Model Battery Voltage Nominal Output Voltage Watts Nominal Output Amps LM1781-7RD5 12 50 12.84 3.6 LH1781-2R 12 70 12.84 5 LK4740-7R 12 150 12.84 10 LM1782-7R 24 50 25.68 1.8 6.6 x 4.4(3U) x 1.54(8 TE) inch 168 x 111 x 39 mm LH1782-2R 24 70 25.68 2.5 LK5740-7R 24 150 25.68 2.7 Output Adjustment Ranges The following adjustment ranges apply to all single-output models. LKP5740-6R 24 250 25.68 4.5 LM1783-7R 36 50 38.52 1.2 LH1783-2R 36 70 38.52 1.67 Vout Low High LM1784-7R 48 50 51.36 0.9 5.1 12 15 24 48 0 0 0 0 0 5.5 13.2 16.5 26.4 52.8 LH1784-2R 48 70 51.36 1.25 LK5740-7R 48 150 2 x 25.68 2 x 2.7 LKP5740-6R 48 250 2 x 25.68 2 x 4.5 LM1785-7R 60 50 64.2 60.72 LH1785-2R 60 70 64.2 1 M Series M Series (40 to 50 Watts) Vout 1, 2, 3 Amps 1, 2, 3 VAC Input Model 5.1 8 85 to 264 LM1001-7R 12 4 85 to 264 LM1301-7R 15 3.4 85 to 264 LM1501-7R 24 2 85 to 264 LM1601-7R 48 1 85 to 264 LM1901-7R 12, 12 2, 2 85 to 264 LM2320-7 15, 15 1.7, 1.7 85 to 264 LM2540-7 High 5.1, 12, 12 5, 0.7, 0.7 85 to 264 LM3020-7 5.6 13.2 16.5 26.4 52.8 5.1, 15, 15 5, 0.6, 0.6 85 to 264 LM3040-7 H Series 6.6 x 4.4(3U) x 1.54(8 TE) inch 168 x 111 x 39 mm Output Adjustment Ranges The following adjustment ranges apply to single-output models. Vout 5.1 12 15 24 48 Low 0 0 0 0 0 H Series (42 to 72 Watts) Output 1, 2, 3 Amps 1, 2, 3 Max Watts Model Input 85 to 255 VAC 5.1 11 56 LH1001-2R 12 6 72 LH1301-2R 15 4.5 67 LH1501-2R 24 3 72 LH1601-2R 48 1.5 72 LH1901-2R 12, 12 2, 2 48 LH2320-2 15, 15 1.7, 1.7 51 LH2540-2 5.1, 12, 12 5, 0.7, 0.7 42 LH3020-2 5.1, 15, 15 5, 0.6, 0.6 43 LH3040-2 M and H Series Features Safety: Class I equipment according to IEC/EN60950, UL1950 Universal input voltage range www.power-one.com 50 Output voltage control (R) Surge and transient suppression circuitry Outputs individually isolated and fully protected against overload. Cassette > AC-DC Unsigned output voltages are isolated and can be used as either + or - polarities. S Series (81 to 100 Watts) Vout 1, 2 Amps 1, 2 VAC Input Model PFC 5.1 16 85 to 264 LS1001-7R no 5.1 16 85 to 264 LS4001-7R yes 12 8 85 to 264 LS1301-7R no 12 8 85 to 264 LS4301-7R yes 15 6.5 85 to 264 LS1501-7R no 15 6.5 85 to 264 LS4501-7R yes 24 4.2 85 to 264 LS1601-7R no 24 4.2 85 to 264 LS4601-7R yes 12, 12 4, 4 85 to 264 LS2320-7R no 12, 12 4, 4 85 to 264 LS5320-7R yes 15, 15 3.2, 3.2 85 to 264 LS2540-7R no 15, 15 3.2, 3.2 85 to 264 LS5540-7R yes 24, 24 2, 2 85 to 264 LS2660-7R no 24, 24 2, 2 85 to 264 LS5660-7R yes Safety: Class I equipment according to IEC/EN 60950, UL 60950 LS 1000/2000 no PFC, fin 47 to 440 Hz Output voltage control (R) and inhibit S Series 6.6 x 4.4(3U) x 2.4(12 TE) inch 168 x 111 x 60 mm Output Adjustment Ranges The following adjustment ranges apply to all models. Vout Low High 5.1 12 15 24 48 0 0 0 0 0 5.6 13.2 16.5 26.4 52.8 Outputs open- and short-circuit proof Ambient temperature range -7: -25 to 71 C No derating over temperature K & KP Series (127 to 278 Watts) Vout 1, 2 Amps 1, 2 VAC Input Model PFC 5.1 25 85 to 264 LK1001-7R no 5.1 25 85 to 264 LK4003-6R yes 12 12 85 to 264 LK1301-7R no 12 12 85 to 264 LK4301-7R yes 15 10 85 to 264 LK1501-7R no 15 10 85 to 264 LK4501-7R yes 24 6 85 to 264 LK1601-7R no 24 6 85 to 264 LK4601-7R yes 12, 12 6, 6 85 to 264 LK2320-7R no 12, 12 6, 6 85 to 264 LK5320-7R yes 12, 12 10, 10 187 to 255 LKP5320-6R yes 15, 15 5, 5 85 to 264 LK2540-7R no 15, 15 5, 5 85 to 264 LK5540-7R yes 24, 24 3, 3 85 to 264 LK2660-7R no 24, 24 3, 3 85 to 264 LK5660-7R yes 24, 24 4.8, 4.8 187 to 255 LKP5662-7R yes 24, 24 5.2, 5.2 187 to 255 LKP5660-7R yes 24, 24 5.8, 5.8 187 to 255 LKP5661-5R yes Safety: Class I equipment according to IEC/EN 60950, UL 1950 Universal wide input voltage range (LK models) Efficient input filter K Series 6.6 x 4.4(3U) x 3.2(16 TE) inch 168 x 111 x 80 mm Output Adjustment Ranges The following adjustment ranges apply to all models. Vout Low High 5.1 12 15 24 0 0 0 0 5.6 13.2 16.5 26.4 LK 1000/2000 no PFC, fin 47 to 440 Hz Output voltage control (R) and inhibit Input over- and undervoltage lockout 51 Visit our web site: www.power-one.com Includes Global Sales and Distributor Listings Power-One, Inc. 740 Calle Plano Camarillo, CA 93012 (800) 678-9445