Z, J zero ohm jumpers features * * * * * Type Z are conformal coated Type J are molded Suitable for automatic machine insertion Size compatible with 1/8, 1/4 and 1/2 watt resistors Marking: Type Z are tan color, single black band identifier Type J are black, no marking dimensions and construction D L l d Type J Insulation Marking Resistive End Coating Film Cap C Lead Wire L l D d Type Z16 .126.008 (3.20.2) Z25 .240.02 (6.10.5) Z25Y .228 (5.8) Z33 .335 (8.51) J1/6Z J1/4Z Molded Resin L (ref.) Dimensions inches (mm) C (max.) D d (nom.) .134 (3.4) .280 (7.1) (1.7 +0.2 -0.1 ) .087.004 (2.20.1) .118.012 (3.00.3) -- .067.008 (1.70.2) +0.1) -0.2 .256.02 (6.50.5) -- .018 (0.45) .091.012 (2.30.3) .365 (9.27) .134 +.004 -.008 (3.4 .067 +.008 -.004 .091 +0 -.012 (2.3 +0 -0.3 ) l .787 min. (20.0 min.) .024 (0.6) .020 (0.5) 1.18.118 (30.03.0) .024 (0.6) Solder Plated Copper Wire leaded resistors Type Z ordering information Old Part # New Part # Z16 T52 Type Packaging Z16 L T52 A Type Termination Material Taping and Forming Packaging Z16 Z25 Z25Y Z33 J1/4Z J1/6Z C: SnCu L: SnPb T26, T52 A: Ammo R: Reel For further information on packaging, please refer to Appendix C. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA Speer Electronics, Inc. * Bolivar Drive * P.O. Box 547 * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com 201 Z, J zero ohm jumpers applications and ratings Maximum Amperage Minimum Dielectric Withstanding Voltage Z16 1.5A 300V Z25 2.5A 500V Z25Y 15A 500V Z33 3A 500V J1/6Z 8A -- J1/4Z 10A -- Part Designation Resistance Rated Ambient Temperature Operating Temperature Range +70C -55C to +155C Less than 20m Less than 20m 0.8m/cm environmental applications Derating Curve 2.5 Z25 % Rated Power 2.0 1.5 Z16 1.0 0.5 0 -80 -40 -55 0 120 80 70 Ambient Temperature (C) 40 160 155 Performance Characteristics leaded resistors Parameter Resistance Resistance to Solder Heat Requirement Less than 20m Solderability 90% coverage minimum Terminal Strength No mechanical damages Rapid Change of Temperature Moisture Resistance Endurance @ 70C Solvent Resistance Less than 20m No visible damages to protective coating and marking Test Method Measuring points are 10mm 1mm from the end cap Terminal except 3mm shall be immersed in the solder, 350C 5C, 3.5 seconds 0.5 second 235C 5C, 5 seconds 0.5 second (Direct Load) Z16: 5N, 30 seconds, Z25: 10N, 30 seconds (Twist Test) 360, 5 times (Bending Test) 5N, 90, 2 times (Z16: 2.5N) -55C (30 minutes)/+85C (30 minutes), 5 cycles 40C 2C, 90-95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 70C 2C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle Isopropyl alcohol with ultrasonic cleansing for 2 minutes Power: 0.3W/cm2, f: 28kHz, Temperature: 35C 5C Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 202 KOA Speer Electronics, Inc. * Bolivar Drive * P.O. Box 547 * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com