September 2007 Rev 8 1/14
14
2N7000
2N7002
N-channel 60V - 1.8Ω - 0.35A - SOT23-3L / TO-92
STripFET™ Power MOSFET
Features
■Low Qg
■Low threshold drive
Application
■Switching applications
Description
This MOSFET is the second generation of
STMicroelectronics unique “Single Feature
Size™” strip-based process. The resulting
transistor shows extremely high packing density
for low on-resistance, rugged avalanche
characteristics and less critical alignment steps
therefore a remarkable manufacturing
reproducibility.
Figure 1. Internal schematic diagram
Type VDSS RDS(on) ID
2N7000 60V <5Ω (@10V) 0.35
2N7002 60V <5Ω (@10V) 0.20
1
2
3
SOT23-3L TO-92
SOT23-3L TO-92
Table 1. Device summary
Order codes Marking Package Packaging
2N7000 2N7000G TO-92 Bulk
2N7002 ST2N SOT23-3L Tape & reel
www.st.com
Contents 2N7000 - 2N7002
2/14
Contents
1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2N7000 - 2N7002 Electrical ratings
3/14
1 Electrical ratings
Table 2. Absolute maximum ratings
Symbol Parameter
Value
Unit
TO-92 SOT23-3L
VDS Drain-source voltage (VGS = 0) 60 V
VDGR Drain-gate voltage (RGS = 20 kΩ)60V
VGS Gate- source voltage ± 18 V
IDDrain current (continuous) at TC = 25°C 0.35 0.20 A
IDM (1)
1. Pulse width limited by safe operating area
Drain current (pulsed) 1.4 1 A
PTOT Total dissipation at TC = 25°C 1 0.35 W
Table 3. Thermal data
Symbol Parameter
Value
Unit
TO-92 SOT23-3L
Rthj-amb Thermal resistance junction-ambient max 125 357.1 (1)
1. When mounted on 1inch² FR-4, 2 Oz copper board.
°C/W
TJOperating junction temperature - 55 to 150 °C
Tstg Storage temperature
Electrical characteristics 2N7000 - 2N7002
4/14
2 Electrical characteristics
(TCASE=25°C unless otherwise specified)
Table 4. On/off states
Symbol Parameter Test conditions Min. Typ. Max. Unit
V(BR)DSS
Drain-source
breakdown voltage ID = 250µA, VGS =0 60 V
IDSS
Zero gate voltage
drain current (VGS = 0)
VDS = max rating
VDS = max rating,
TC = 125°C
1
10
µA
µA
IGSS
Gate-body leakage
current (VDS = 0) VGS = ± 18V ±100 nA
VGS(th) Gate threshold voltage VDS = VGS, ID = 250µA 1 2.1 3 V
RDS(on)
Static drain-source on
resistance
VGS = 10V, ID = 0.5A
VGS = 4.5V, ID = 0.5A
1.8
2
5
5.3
Ω
Ω
Table 5. Dynamic
Symbol Parameter Test conditions Min. Typ. Max. Unit
gfs (1)
1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5%.
Forward
transconductance VDS = 10V , ID=0.5A 0.6 S
Ciss
Coss
Crss
Input capacitance
Output capacitance
Reverse transfer
capacitance
VDS = 25V, f = 1MHz,
VGS = 0
43
20
6
pF
pF
pF
td(on)
tr
td(off)
tf
Turn-on delay time
Rise time
Turn-off delay time
Fall time
VDD = 30V, ID = 0.5A
RG=4.7Ω VGS = 4.5V
(see Figure 16)
5
15
7
8
ns
ns
ns
ns
Qg
Qgs
Qgd
Total gate charge
Gate-source charge
Gate-drain charge
VDD = 30V, ID = 1A,
VGS = 5V
(see Figure 17)
1.4
0.8
0.5
2nC
nC
nC
2N7000 - 2N7002 Electrical characteristics
5/14
Table 6. Source drain diode
Symbol Parameter Test conditions Min. Typ. Max. Unit
ISD
ISDM (1)
1. Pulse width limited by safe operating area.
Source-drain current
Source-drain current
(pulsed)
0.35
1.40
A
A
VSD (2)
2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5%
Forward on voltage ISD = 1A, VGS = 0 1.2 V
trr
Qrr
IRRM
Reverse recovery time
Reverse recovery charge
Reverse recovery current
ISD = 1A, di/dt = 100A/µs,
VDD = 20V, Tj = 150°C
(see Figure 18)
32
25
1.6
ns
nC
A
Electrical characteristics 2N7000 - 2N7002
6/14
2.1 Electrical characteristics (curves)
Figure 2. Safe operating area for TO-92 Figure 3. Thermal impedance for TO-92
Figure 4. Safe operating area for SOT23-3L Figure 5. Thermal impedance for SOT23-3L
Figure 6. Output characteristics Figure 7. Transfer characteristics
2N7000 - 2N7002 Electrical characteristics
7/14
Figure 8. Transconductance Figure 9. Static drain-source on resistance
Figure 10. Gate charge vs gate-source voltage Figure 11. Capacitance variations
Figure 12. Normalized gate threshold voltage
vs temperature
Figure 13. Normalized on resistance vs
temperature
Electrical characteristics 2N7000 - 2N7002
8/14
Figure 14. Source-drain diode forward
characteristics
Figure 15. Normalized BVDSS vs temperature
2N7000 - 2N7002 Test circuit
9/14
3 Test circuit
Figure 16. Switching times test circuit for
resistive load
Figure 17. Gate charge test circuit
Figure 18. Test circuit for inductive load
switching and diode recovery times
Figure 19. Unclamped Inductive load test
circuit
Figure 20. Unclamped inductive waveform Figure 21. Switching time waveform
Package mechanical data 2N7000 - 2N7002
10/14
4 Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
2N7000 - 2N7002 Package mechanical data
11/14
DIM.
mm. inch
MIN. TYP MAX. MIN. TYP. MAX.
A 4.32 4.95 0.170 0.194
b 0.36 0.51 0.014 0.020
D 4.45 4.95 0.175 0.194
E 3.30 3.94 0.130 0.155
e 2.41 2.67 0.094 0.105
e1 1.14 1.40 0.044 0.055
L 12.70 15.49 0.50 0.610
R 2.16 2.41 0.085 0.094
S1 0.92 1.52 0.036 0.060
W 0.41 0.56 0.016 0.022
V5° 5°
TO-92 MECHANICAL DATA
Package mechanical data 2N7000 - 2N7002
12/14
DIM.
mm. mils
MIN. TYP MAX. MIN. TYP. MAX.
A 0.890 1.120 35.05 44.12
A1 0.010 0.100 0.39 3.94
A2 0.880 0.950 1.020 34.65 37.41 40.17
b 0.300 0.500 11.81 19.69
C 0.080 0.200 3.15 7.88
D 2.800 2.900 3.040 110.26 114.17 119.72
E 2.100 2.64 82.70 103.96
E1 1.200 1.300 1.400 47.26 51.19 55.13
e 0.950 37.41
e1 1.900 74.82
L 0.400 0.600 15.75 23.63
L1 0.540 21.27
k8°8°
SOT23-3L MECHANICAL DATA
A
A1
A2
D
e
e1
b
E
E1
0.10 C
C
SEATING
PLANE
L1
L
0.25
GAUGE
PLANE
c
7110469/A
2N7000 - 2N7002 Revision history
13/14
5 Revision history
Table 7. Document revision history
Date Revision Changes
09-Oct-2004 1 First document
22-Jun-2004 2 Complete document
06-Apr-2005 3New typ and max value inserted for Vgs(th)
19-Apr-2005 4The document has been reformatted
26-Apr-2005 5New Pin Configuration for TO-92
28-Apr-2005 6Pin configuration change again
19-Jun-2006 7New template, no content change
03-Sep-2007 8Corrected marking on first page
2N7000 - 2N7002
14/14
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
