Lumifa
LF1D and LF2D LED Lighting
4 www.IDEC.com 1705151124
LF1D and LF2D
Machine Tools • Food and Beverage Processsing Equipment • Vision Systems
LF1D (IP67, IP69K) and LF2D (IP67, IP67F) Series
With their rugged construction, the LF1D/2D series of light units are ideal for machine tools,
automated label and package inspection equipment, and food and beverage processing
equipment. Their design provides equally brilliant light at the center or edges of the units.
Plus with their ratings, the LF1D (IP67, IP67F, IP69K) and LF2D (IP67, IP67F) can be used
where high-pressure and high-temperature washdowns are used.
Mini (LF1D-C)
• Compact unit only 100 x 50 x 25mm
• Single LED module design eliminates multiple shadows while distributing light over a
wide area (120º)
Slim and Wide (LF1D/2D-EH, FH)
• Brightness: 1450lx at 1m
• Available with terminal block or spring clamp connections for easy installation
• Angle adjustable mounting brackets provide installation exibility
Long (LF1D-H/J)
• Two lengths available: 365mm and 510mm
• The at light design reduces glare and multiple shadows, improving visibility from a distance
• M12 Quick Disconnect option (Pig Tail)
LED Optical Specications
Model Mini Slim Wide Long
LED modules and illumination units may
vary in color and brilliance. Luminous ux,
color temperature, and illuminance values
shown are typical.
LF1D-C LF1D/2D-EH LF1D/2D-FH LF1D-H LF1D-J
Illumination Color Cool White Neutral White
Total Luminous Flux 560lm 1000lm 1260lm 2000lm 3000lm
Color Temperature 5700K 4700K
Reference Illuminance at 1.0m 180lx 1450lx 1200lx 560lx 840lx
General Specications
Model Mini Slim Wide Long
LF1D-C LF1D/2D-EH LF1D/2D-FH LF1D-H LF1D-J
Rated Voltage 24V DC
Voltage Range 21.6 to 26.4V DC
Rated Power (typ.) 4.6W 11W 12.5W 18.4W 27.6W
Insulation Resistance 100MΩ minimum (500V DC megger)
Dielectric Strength 1000V AC, 50/60Hz, 1 minute
Vibration Resistance (damage limits) Frequency 5 to 55Hz, amplitude 0.5mm
Shock Resistance (damage limits) 1000m/s2
Operating Temperature –30 to +55°C (no freezing)
Operating Humidity 45 to 85% RH (no condensation)
Storage Temperature –35 to +70°C (no freezing)
Operating Environment No corrosive gases
Life 150,000 hours (The illumination duration in which the illuminance maintains a minimum of 70% of
the initial value at 25ºC.)
Degree of Protection 2IP67F (reinforced glass), IP67 (all models), IP69K (LF1D)
Material 3Housing: Diecast aluminum (LF1D/LF2D), Lens: Reinforced glass or polycarbonate (LF1D/LF2D)
Cover: Stainless steel (LF1D), Flange cover: Diecast aluminum (LF2D)
Weight (approx.) 420g
LF1D-EH-2W*: 750g
LF1D-EH-2W-A*: 950g
LF2D-EH-2W*: 850g
LF2D-EH-2W-A*: 1,000g
LF1D-FH-2W*: 800g
LF1D-FH-2W-*: 1,000g
LF2D-FH-2W*: 900g
LF2D-FH-2W-A*: 1,050g
1200g 1600g
1. LED life depends on the operating environment.
2. Waterproof or oil-proof characteristics specied by IEC 60529 and JIS0920. For illumination units without accessories, use a cable gland and cables that satisfy IP67F or IP67 degree of protection.
3. The reinforced glass and polycarbonate lens types have the same appearance, but have different degrees of protection (IP67F or IP67).
5
800-262-IDEC (4332) • USA & Canada
LF1D and LF2D
LED Lighting
Lumifa
1705151124
Part Numbers
Mini (LF1D-C) Long (LF1D-H 365mm) Long (LF1D-J 510mm)
Cable Cable Part Number Cable Part Number
Location Length Part Number Location Length Location Length
Side 3m LF1D-C2F-2W-330 Side 5m LF1D-H2F-2N-350 Side 5m LF1D-J2F-2N-350
5m LF1D-C2F-2W-350 1.5m + M12 connector LF1D-H2F-2N-3B0 1.5m + M12 connector LF1D-J2F-2N-3B0
Back 3m LF1D-C2F-2W-430 Back 5m LF1D-H2F-2N-450 Back 5m LF1D-J2F-2N-450
5m LF1D-C2F-2W-450 1.5m + M12 connector LF1D-H2F-2N-4B0 1.5m + M12 connector LF1D-J2F-2N-4B0
Slim and Wide Surface Mounting (LF1D-EH, FH)
Model Slim Model (10 LEDs × 1 row) Wide Model (7 LEDs × 2 rows)
Cable Gland
LF9Z-A11
Cable
LF9Z-C05
Mounting Bracket
LF9Z-B11,B12 Clear Reinforced Glass Clear Polycarbonate Clear Reinforced Glass Clear Polycarbonate
—
(hole on the side) ——
√
LF1D-EH2F-2W
LF1D-EH2F-2W-101
LF1D-EH3G-2W
LF1D-EH3G-2W-101
LF1D-FH2F-2W
LF1D-FH2F-2W-101
LF1D-FH3G-2W
LF1D-FH3G-2W-101
—
(hole on the back) ——
√
LF1D-EH2F-2W-200
LF1D-EH2F-2W-201
LF1D-EH3G-2W-200
LF1D-EH3G-2W-201
LF1D-FH2F-2W-200
LF1D-FH2F-2W-201
LF1D-FH3G-2W-200
LF1D-FH3G-2W-201
√
(Side)
——
√
LF1D-EH2F-2W-300
LF1D-EH2F-2W-301
LF1D-EH3G-2W-300
LF1D-EH3G-2W-301
LF1D-FH2F-2W-300
LF1D-FH2F-2W-301
LF1D-FH3G-2W-300
LF1D-FH3G-2W-301
√—
√
LF1D-EH2F-2W-350
LF1D-EH2F-2W-A
LF1D-EH3G-2W-350
LF1D-EH3G-2W-A
LF1D-FH2F-2W-350
LF1D-FH2F-2W-A
LF1D-FH3G-2W-350
LF1D-FH3G-2W-A
√
(Back)
——
√
LF1D-EH2F-2W-400
LF1D-EH2F-2W-401
LF1D-EH3G-2W-400
LF1D-EH3G-2W-401
LF1D-FH2F-2W-400
LF1D-FH2F-2W-401
LF1D-FH3G-2W-400
LF1D-FH3G-2W-401
√—
√
LF1D-EH2F-2W-450
LF1D-EH2F-2W-451
LF1D-EH3G-2W-450
LF1D-EH3G-2W-451
LF1D-FH2F-2W-450
LF1D-FH2F-2W-451
LF1D-FH3G-2W-450
LF1D-FH3G-2W-451
Slim and Wide Recessed Mounting (LF2D-EH, FH)
Model Slim Model (10 LEDs × 1 row) Wide Model (7 LEDs × 2 rows)
Cable Gland
LF9Z-A11
Cable
LF9Z-C05 Clear Reinforced Glass Clear Polycarbonate Clear Reinforced Glass Clear Polycarbonate
— — LF2D-EH2F-2W LF2D-EH3G-2W LF2D-FH2F-2W LF2D-FH3G-2W
— — LF2D-EH2F-2W-200 LF2D-EH3G-2W-200 LF2D-FH2F-2W-200 LF2D-FH3G-2W-200
√
(Side)
— LF2D-EH2F-2W-300 LF2D-EH3G-2W-300 LF2D-FH2F-2W-300 LF2D-FH3G-2W-300
√ LF2D-EH2F-2W-A LF2D-EH3G-2W-A LF2D-FH2F-2W-A LF2D-FH3G-2W-A
√
(Back)
— LF2D-EH2F-2W-400 LF2D-EH3G-2W-400 LF2D-FH2F-2W-400 LF2D-FH3G-2W-400
√ LF2D-EH2F-2W-450 LF2D-EH3G-2W-450 LF2D-FH2F-2W-450 LF2D-FH3G-2W-450
Accessories
Item Mounting Bracket Cable Gland Cable
Fixed Adjustable Angle
Part Number LF9Z-B11 LF9Z-B12 LF9Z-1MDE1 LF9Z-1MDF1 LF9Z-A11 LF9Z-C05
Applicable Unit LF1D (Slim) LF1D (Wide) LF1D (Slim) LF1D (Wide) LF1D/2D (Slim and Wide)
Material Stainless Steel Brass PVC
Notes 1 pair, Left and Right M8* Length: 5m
*Applicable wire size (10-12 AWG)
Lumifa
LF1D and LF2D LED Lighting
6 www.IDEC.com 1705151124
Part Number Structure (use for interpreting part numbers only) Terminal Block Wiring
L F 1 D – EH 2F – 2 W – 3 0 0
Size (LED arrangement)
C: Mini 100mm (3.94”)
EH: Slim Model (10 LEDs × 1 row)
FH: Wide Model (7 LEDs × 2 rows)
H: Long 365mm (14.37”)
J: Long 510mm (20.08”)
Lens Type Degree of Protection
2F: Reinforced glass IP67F, IP69K (LF1D) IP67F(LF2D)
3G: Polycarbonate IP67, IP69K (LF1D) IP67 (LF2D)
Acacessory Options
(see chart)
Shape
1: Surface mount
2: Recessed mount
Illumination Color
W: White (except LF1D-H/J)
N: Neutral White (LF1D-H/J)
1. Mounting bracket available for LF1D (wide and slim) only.
2. Only available for LF1D (wide and slim) models.
3. 1.5m cable with M12 connector for Long only (LF1D-H, J).
Slim Type
（＋）
（−）
（＋）
（−）
Wide Type
（＋）
（−）
（＋
）
（−
）
Applicable ferrules: 0.25 to 0.75 mm2
Recommended source - Phoenix Contact:
AI 0,25-12 BU, AI 0,34-12 TQ,
AI 0,5-12 WH, AI 0,75-12 GY
Illuminance Charts
LF1D-C LF1D/2D-EH LF1D/2D-FH LF1D-H LF1D-J
90 °90 °
60 °
0°
30 °
60
°
100
30 °
200
90 °90 °
60 °
0°
30 °
60
°
100
30
°
200
90 °
90 °
60
°
0 °
30 °
60 °
600
30
°
1,200
1,800
90 °
90 °
60
°
0
°
30 °
60
°
400
30 °
800
1,200
90 °
90 °
0°
30 °
60 °
100
30 °
200
90 °
90 °
60 °
0
°
30 °
60 °
100
30 °
200
A
C
B
A
B
C
Internal Circuits
LF1D-C LF1D/2D-E, EH, F, FH LF1D-H/J
Housing
(–)
(+) Constant Current
Circuit
+ LED
Housing
Constant Current
Circuit
+ LED
(–)
(+)
(–)
(+)
Housing
Constant Current
Circuit
+ LED
Distribution Characteristics
LF1D-C LF1D/2D-EH LF1D/2D-FH LF1D-H LF1D-J
-400 400
-800 8000 （mm）
450
300
150
0
（
lx）
-400 400
-800 8000 （mm
）
0
（lx）
1,200
800
400
-400 400
-800 8000 （mm）
1,200
800
400
0
（lx）
-400 400
-800 8000 （mm）
900
600
300
0
（lx）
-400 400
-800 8000 （mm）
900
600
300
0
（lx）
Dimensions (mm)
LF1D-C Mini
7
800-262-IDEC (4332) • USA & Canada
LF1D and LF2D
LED Lighting
Lumifa
1705151124
100
84
50
Illumination Surface Front Cover
25
2
Cable Length
4.6
Housing
Partially-stripped (×2)
24AWG
11
9
Cable
840.2
ø8 (Note)
11
18.1
2-M5 tapped hole or ø5.2 hole
11
(23.9)
Brown:
+ 24V DC
Blue: –0V DC
22
12
2-ø11.2
Mounting Hole Layout
Note: When leading the cable from the cable
gland on the back, provide a hole in the mounting
plate. Also, provide a proper sealing.
Recommended M5 screw:
Screw head height: 9.5mm max.
Screw head diameter: 10mm max.
Screw length: 20mm min.
Recommended washer diameter: 10mm max.
LF1D Slim
8
40
15
M8 P1.0
Effective thread:
5mm
4-M4 P0.7
Effective thread
10mm
(When using no accessories)
2-ø4.2
4-4.2
40 ±0.2
305 ±0.2
40 ±0.2
40
8
Cable Length: 5m
ø15
+0.2
0
164.8 ±1
164.8
374 ±2
25 ±0.2 40 1.5
29.8
374
2
R2.6
390
25
30
49.8
32
350
257
(159) (146)
305
4-M4 P0.7
Effective thread:10mm
Axis Center
4-M5 Screws
Side Cover
15
Brown: L(+)
Blue: N (–)
Pink: ( )
Front Cover
Housing
Illumination Surface
Mounting Bracket
2
5
28
(73)
90°
53
50
13
36
66
R45
LF9Z-1MDE1
(Angle Adjustable
Mounting Bracket)
Parially-stripped
(×2) 24AWG
(Note 2)
(Note 1)
–0.5
+2.0
Angle: 0 °
Angle: 90 °
Mounting Hole Layout
All dimensions in mm.
Note 1: When leading the cable from the
cable gland on the back, provide a hole
in the mounting plate.
Note 2: When using the adjustable
mounting bracket, the tolerance is 374
when the gasket diameter is larger than
ø10 and ø12 or smaller
Lumifa
LF1D and LF2D LED Lighting
8 www.IDEC.com 1705151124
LF2D Slim
80
389
65
374
310
30.6
37.5
28.7 5 max.
15.7
Axis Center
Panel thickness: 5 max
+ Gasket (supplied with LF2D)
6-M5×10 Hexagon Socket
Cable Length: 5m
ø5
Cable Gland (Note)
Waterproof Gasket
(suplied with LF2D)
Note: External diameter of cable gland is ø20mm
(+)
(–)
Terminal Block Wiring
6-M5
Screws
374 +0.2
0
366 ±0.2
55 +0.2
0
65 ±0.2
Brown: L(+)
Blue: N (–)
Pink: ( )
Mounting Hole Layout
Applicable ferrules: 0.25 to 0.75 mm2
Recommended source:
AI 0.25-12BU, AI 0.34-12TQ,
AI 0.5-12 WH, AI 0.75-12GY
LF1D Wide
4-M5 P0.8
Effective thread:10mm
Cable Length: 5m
Axis Center
Side Cover
Brown: L(+)
Blue: N (–)
Pink: ( )
Housing
Front CoverIllumination Surface
Mounting Bracket
LF9Z-1MDE1
(Angle Adjustable
Mounting Bracket)
(When using no accessories)
2-
ø
5.2
4-ø5.2
8
12
60
60
8
60 ±0.2
60 ±0.2
227 ±0.2
4-M5 P0.8
Effective thread:
10mm
M8 P1.0
Effective thread:
5mm
12
R2.6
ø5
58.6
183.6
27
2
1.5
25.9
40
310
292
270
74.7
ø15
(Note 1)
124.8 ±1
40 ±0.2
292
±2
227
(107)(120)
60
4-M5 Screws
Parially-stripped (×2)
24AWG
+0.2
0
2
124.8
90°
62
36
(87.5)
9 75
27.5
77
R60
(Note 2)
–0.5
+2.0
Angle: 0 °
Angle: 90 °
All dimensions in mm.
Mounting Hole Layout
Note 1: When leading the cable from the cable gland
on the back, provide a hole in the mounting plate.
Note 2: When using the angle adjustable mounting
bracket, the tolerance is 374 when the gasket
diameter is larger than ø10 and ø12 or smaller.
9
800-262-IDEC (4332) • USA & Canada
LF1D and LF2D
LED Lighting
Lumifa
1705151124
LF2D Wide
Axis Center
Panel thickness: 5 max
+ Gasket (supplied with LF2D)
6-M5×10 Hexagon Socket
Cable Length: 5m
Cable Gland (Note)
Note: External diameter of cable gland is ø20mm
(+)
(–)
Terminal Block Wiring
ø5
35 14.8
55
217
90
308
293
105
5 max.
24.8
Brown: L(+)
Blue: N (–)
Pink: ( )
Waterproof Gasket
(suplied with LF2D)
286 +0.2
0
80 +0.2
0
90 ±0.2
293 ±0.2
6-M5
Screws
Mounting Hole Layout
Applicable ferrules: 0.25 to 0.75 mm2
Recommended source:
AI 0.25-12BU, AI 0.34-12TQ,
AI 0.5-12 WH, AI 0.75-12GY
LF1D-H Long
365
55
288
84
24.8
72
215
ø4.6
(25)
12.5
(
35
)
72 ±0.2
215 ±0.2
157.5 ±0.2
12.7
Side Cover
Partially-stripped (×2)
24AWG
Brown: +24V DC
Blue: – 0V DC
A
A
M5 P0.8
ø8 (Note 1)
6-ø5.5
1470
LF1D-H2F-2 - B (M12 connector)
46.8
ø14.8
A-A sec. (enlarged view)
(When M5 screw is installed)
9 to 11
Screw Length
(Note 2)
Mounting Panel
Plain Washer
Spring Washer
M5 Screw
Housing
+24V DC
–0V DC
NC
NC
Pin Assignment
Front Cover
Illumination Surface
Housing
Cable
Cable Length
M12 connector: SAC-4P-MS SCO/150/1.5
Mounting Hole Layout
Note 1: When leading the cable from the cable gland on the back, provide a hole in the mounting
plate. A ø16 hole is necessary when using the LF1D-*2F -2N *B* (M12 connector type)
Note 2: Choose mounting screws in consideration of mounting plate thickness.
Use a connector that satises the required
degree of protection. Recommended
connector: SAC-4P-1.5-PUR/FS SCO
Lumifa
LF1D and LF2D LED Lighting
10 www.IDEC.com 1705151124
LF1D-J Long
All dimensions in mm.
Side Cover
Partially-stripped (×2)
24AWG
A-A sec. (enlarged view)
(When M5 screw is installed)
9 to 11
Screw Length
(Note 2)
Mounting Panel
Plain Washer
Spring Washer
M5 Screw
Housing
(
25
)
510
55
432
84
12.7
ø4.6
12.5 (35 )
24.8
72
360
120
72 ±0.2
360 ±0.2
120 ±0.2
230 ±0.2
Front Cover
Illumination Surface
Housing
A
A
M5
Cable
P0.8
8-ø5.5
ø8 (Note 2)
LF1D-J2F-2 - B (M12 connector)
Cable Length
Brown: +24V DC
Blue: – 0V DC
Pin Assignment
+24V DC
–0V DC
NC
NC
Note 1: When leading the cable from the cable gland on the back, provide a
1470 46.8
ø14.8
M12 connector: SAC-4P-MS SCO/150/1.5
Mounting Hole Layout
Use a connector that satises the required
degree of protection. Recommended
connector: SAC-4P-1.5-PUR/FS SCO
Safety Precautions
Do not disassemble, repair, or modify the LF1D/2D. Otherwise electric shock, re, or malfunction may occur. Before wiring, conrm that the LF1D/2D has cooled down
sufciently. Ensure the correct operating temperature. Otherwise internal temperature rise may result in damage. LED illumination unit is general-purpose industrial
electric device. Do not use for electronic equipment which may damage the human body or threaten life in case a malfunction or failure occurs.
Instructions
LED modules may vary in illumination colors and illuminance. Before designing equipment and powering up illumination units, conrm the specications described in
the instruction sheet. Apply voltage within the rated value, otherwise the LED elements may be damaged. Do not loosen screws, otherwise the protection character-
istics will be impaired. Do not use or store in a place subjected to vibration and shock. Otherwise electric shock or failure occurs. To clean the cover, use a soft cloth
with water or neutral detergent. Do not use solvents such as thinners, benzene, or alkaline, otherwise discoloration, deterioration, or decrease in strength may occur.