G3J-T205BL-C-AC100-240 - Omron - Datasheet.Directory

CSM_G3J-T-C_DS_E_3_1

Solid State Contactor for 3-phase Motors with Built-in Soft Start/Stop and Monitor Output

G3J-T-C

New Models with AC Power Supply Input and

Monitor Output Equivalent to Non-contact

SPST-NO Join the G3J-T Series

• Limiting the starting current saves energy.

• Certified for UL and CSA.

• Mounts with screws or to DIN Track.

• Compact design with heat sinks (3.7-kW models: 100 × 100 ×

130 mm (W × H × D)).

• Built-in snubber circuit and thyristor.

• Built-in operation indicator.

Refer to Safety Precautions for All Solid State

Relays.

Appearance

Ordering Information

■List of Models

■Accessories (Order Separately)

Mounting Bracket

Note: Use this Bracket when mounting Thermal Relay GTK-22 (LS Industrial Systems) to a G3J-series.

Output terminals (load side)

Monitor output terminals

Output terminals (power supply side)

Ramp-down time adjuster (default setting: 1 s)

Ramp-up time adjuster (default setting: 1 s)

Operation indicator

Input terminals

Starting torque adjuster (default setting: 200%)

Number of

elements

Isolation

method

Rated power

supply voltage

Input method Applicable monitor capacity

(AC3)

Monitor

output

Model

3 Phototriac

coupler

100 to 240 VAC No-voltage input

(open and short-

circuited input)

3.7 kW (17.4 A) 200 to 220 VAC AC

switching

output

G3J-T217BL-C AC100-240

2.2 kW (11.1 A) G3J-T211BL-C AC100-240

0.75 kW (4.8 A) G3J-T205BL-C AC100-240

12 to 24 VDC 3.7 kW (17.4 A) DC

switching

output

G3J-T217BL-C DC12-24

2.2 kW (11.1 A) G3J-T211BL-C DC12-24

0.75 kW (4.8 A) G3J-T205BL-C DC12-24

Model

R99-14 FOR G3J (See note.)

G3J-T-C

Specifications

■Certified Standards

UL 508, CSA 22.2 No. 14

■Ratings (at an Ambient Temperature of 25°C)

Power Supply

Operating (Input) Circuit

AC Model DC Model

Main Circuit (for Both AC and DC Models)

Note: 1. The rated carry load depends on the ambient temperature. For details, refer to the Load Current vs. Ambient Temperature graph in

Engineering Data.

2. Satisfies switching test conditions of AC3, AC4, and AC53-a. (Refer to Engineering Data on page 5 for the test conditions.)

3. Single-phase loads cannot be used.

Monitor Output

Item Operating input power

supply specifications

AC Model DC Model

Rated power supply voltage 100 to 240 VAC 12 to 24 VDC

Operating voltage range 85 to 264 VAC 10.2 to 26.4 VDC

Current consumption 40 mA max. (at 100 to 240 VAC) 70 mA max. (at 12 to 24 VDC)

Input

method

No-

voltage

input

Short-circuiting/opening terminals 3 and 1 or

terminals 3 and 2

SSR input short-circuited: Maximum

impedance of 1 kΩ,

Maximum residual

voltage of 1 V

SSR input open: Minimum

impedance of

100 kΩ

Relay input: For minute signals

Input current 10 mA max. (at 12 to 24 VDC)

Input

method

No-

voltage

input

Short-circuiting/opening terminals 3 and 1 or

terminals 3 and 2

SSR input turned ON: Maximum residual

voltage of 2 V between

short-circuited

terminals

SSR input turned OFF:Maximum leakage

current of 0.15 mA

Relay input: For minute signals

Item Model G3J-T217BL-C G3J-T211BL-C G3J-T205BL-C

Rated load voltage 200 to 240 VAC

Rated voltage range 180 to 264 VAC

Rated carry current (See note 1.) 17.4 A (at 40°C) 11.1 A (at 40°C) 4.8 A (at 40°C)

Minimum load current 0.5 A

Inrush current resistance (peak value) 500 A (60 Hz, 1 cycle) 350 A (60 Hz, 1 cycle) 150 A (60 Hz, 1 cycle)

Overload resistance Refer to Engineering Data on page 5

Closed current (effective value) AC3 174 A 111 A 48 A

AC4 208.8 A 133.2 A 57.6 A

Breaking current (effective value) AC3 139.2 A 88.8 A 38.4 A

AC4 174 A 111 A 48 A

Applicable

load

3-phase inductive motor (See note 2.)

(AC3, AC4, AC53-a)

200 to 220 VAC

3.7 kW (17.4 A)

200 to 220 VAC

2.2 kW (11.1 A)

200 to 220 VAC

0.75 kW (4.8 A)

Resistive load (AC1) (See note 3.) 200 to 240 VAC

17.4 A

200 to 240 VAC

11.1 A

200 to 240 VAC

4.8 A

Item Operating input power

supply specifications

AC model (See note.) DC model (See note.)

Rated power supply voltage 100 to 240 VAC 12 to 24 VDC

Operating voltage range 85 to 264 VAC 10.2 to 26.4 VDC

Rated carry current 50 mA 0.2 A

Minimum load current 3 mA 3 mA

5 (+)

6 (−)

Note: Internal wiring

AC model DC model

G3J-T-C

■Characteristics (for Both AC and DC Models)

Note: 1. Provided that the starting torque is 600% In when the motor is started at full voltage.

2. The monitor output will be ON while load current is flowing to the main circuit.

Connections

■Connection Examples

Note: Harmonized protection for motor overload is ensured by using a thermal relay. Be sure, however, to install protective devices on the power

supply side, such as fuses and non-fuse breakers, as protection against accidents due to short-circuiting.

Item Model G3J-T217BL-C G3J-T211BL-C G3J-T205BL-C

Ramp-up time Set within a range of approx. 1 to 25 s.

Ramp-down time Set within a range of approx. 1 to 25 s.

Starting torque (See note 1.) Set within a range of 200% to 450% In.

Monitor output operate time (See note 2.) After control signal input: AC model: 300 ms max. (TYP 50 ms), DC model: 50 ms max.

Monitor output release time (See note 2.) After ramp-down time completion (after main circuit current turns OFF): 60 ms max.

Output ON voltage drop (main circuit) 1.6 V (RMS) max.

Output ON voltage drop (monitor output) AC model: 3.5 VAC max., DC model: 2.0 VDC max.

Leakage current (main circuit) 10 mA max. (at 200 VAC)

Leakage current (monitor output) AC model: 1.5 mA max. (at 200 VAC), DC model: 0.15 mA max. (at 24 VDC)

Insulation resistance 100 MΩ min. (at 500 VDC)

Dielectric strength 2,500 VAC, 60 Hz for 1 min

Vibration resistance 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)

Shock resistance 294 m/s2

Storage temperature −30 to 70°C (with no icing or condensation)

Ambient operating temperature −20 to 60°C (with no icing or condensation)

Ambient operating humidity 45 to 85 %

Weight Approx. 890 g Approx. 760 g Approx. 760 g

AC Model G3J-T@BL-C DC Model G3J-T@BL-C

(NPN transistor input) (PNP transistor input)

L1/R L2/S

Three-phase, 200 to 220 V

G3J

L3/T

100 to

240 VAC

100 to

240 VAC

T1/U T2/V T3/W

Thermal Relay

Motor M

L1/R L2/S

Three-phase, 200 to 220 V

G3J

L3/T

12 to

24 VDC

12 to

24 VDC

T1/U T2/V T3/W

NPN Tr

Thermal Relay

Motor M

L1/R L2/S

Three-phase, 200 to 220 V

G3J

L3/T

T1/U T2/V T3/W

Thermal Relay

Motor

PNP Tr 12 to

24 VDC

12 to

24 VDC

G3J-T-C

Example of Forward/Reverse Rotation

Using Monitor Output

G3J-T-C

Note: Be sure to use a fuse or non-fuse breaker to protect the G3J.

Time Chart Example

Note: Switch between forward and reverse rotation only after the

motor rotation has come to a complete stop.

Monitor Output Usage Example (Motor

Stop Hold)

DC Model G3J-T@BL-C

Monitor Output Applications

•The monitor output will be ON while current is flowing to the main

circuit. Use the monitor output, e.g., to switch the operation

indicator, or to switch control signals during forward/reverse rotation

or when a mechanical brake is used.

•Be sure to use a surge absorber when connecting an inductive load

to the monitor output.

21 21

135

L1/R L2/S

G3J-T-C

L3/T

T1/U T2/V T3/W

Output to

PLC/relay

sequence

Output from

PLC/relay

sequence

PLC/relay-

sequential

timer circuit

Thermal Relay

Motor

246

Three-phase, 200 to 220 V

Fuse or non-fuse breaker

Forward

rotation

Reverse

rotation

Reversible

contactor

NC NC

T3 L3

T2 L2

T1 L1

NC NC

T3 L3

T2 L2

T1 L1

Reversible contactor

Forward rotation signal input

(output form PLC)

Reversible contactor

Reverse rotation signal input

(output from PLC)

G3J-T-C

Input signal

(output from PLC)

G3J-T-C

Monitor output signal

(input to PLC) Ramp-down

time Ramp-down

time

(See note.)

L1/R L2/S

Three-phase, 200 to 220 V

G3J

L3/T

12 to

24 VDC

T1/U T2/V T3/W

NPN Tr

Thermal Relay

Motor

Brake

(non-energized)

Do not use two G3J-T or G3J-C Contactors together

for reversible operation.

G3J-T-C

Engineering Data

Switching Frequency Conditions (AC3/AC4/AC53-a)

Load Current vs. Ambient Temperature

(at Continuous Power)

Overload Resistance

60 Hz, Ta of 25°C, non-repetitive (1/2 max. for repetitive application)

200−20 40 60 80 100

Ambient temperature Ta (°C)

G3J-T217BL-C

G3J-T205BL-C

G3J-T211BL-C

Load current Io (A)

10,000

1,000

100

0.1

0.01

0 100 200 300 400

Overload current (Arms)

G3J-

T211BL-C

G3J-T217BL-C

G3J-

T205BL-C

Harmonized protection with thermal

overload relays has been provided

conforming to EN 60947-4-1 (Class

10A/10) in this area (dotted line:

for hot start).

ON time (s)

AC3 Class (Immediate Start)

Ie: Rated carry current

Ue: Rated load voltage (200/400 V)

Testing for the soft-start model was performed at

the following conditions:

Ramp-up time = 1 s

Starting torque = 450% In

Testing for the soft start/stop model was

performed at the following conditions:

Ramp-up time = 1 s

Ramp-down time = 1 s

Starting torque = 450% In

AC4 Class (Inching)

Ie: Rated carry current

Ue: Rated load voltage (200/400 V)

Testing for the soft-start model was performed at

the following conditions:

Ramp-up time = 1 s

Starting torque = 450% In

Testing for the soft start/stop model was

performed at the following conditions:

Ramp-up time = 1 s

Ramp-down time = 1 s

Starting torque = 450% In

AC53-2: 6-6: 25-15,

Actual Load Service Life Test

Ie: Rated carry current

Ue: Rated load voltage (200/400 V)

Testing for the soft-start model was performed at

the following conditions:

Ramp-up time = 1 s

Starting torque = 450% In

Testing for the soft start/stop model was

performed at the following conditions:

Ramp-up time = 1 s

Ramp-down time = 1 s

Starting torque = 450% In

0.3 s

(Ue, cos θ = 0.35)

6Ie

(Ue, cos θ = 0.35)

0.75 s

10 s

0.45 s

6Ie

(Ue, cos θ = 0.35)

10 s

6 s

(Ue, cos θ = 0.35)

6Ie

(Ue, cos θ = 0.35)

1 min.

4 min.

G3J-T-C

Time Chart

Note: 1. The soft-start time and soft-stop time depend on the load characteristics (e.g., inertia and friction factor) in addition to the starting torque,

ramp-up time, and ramp-down time. Therefore, the soft-start time or soft-stop time will not increase beyond a certain point if the ramp-up

time and ramp-down time are increased.

2. Due to the soft-stop control characteristics, the load current continues flowing even after the motor stops. Set to the optimum value

according to the application.

3. The operation indicator will light synchronized with the monitor output.

Dimensions

Note: All units are in millimeters unless otherwise indicated.

Ramp-up time Ramp-down time

Monitor output operate time

Monitor output release time

Power supply for

internal drive

Control input signal

Operation indicator lit

Monitor output

Load current

Rated current

15.85

34.9

37.1

54.5

107.9

Input terminals

Three, M3 × 8

Monitor

output

Two, M3 × 8

50 max. 4.6 dia. Stating torque adjuster

Ramp-up time adjuster

120 max.

Ramp-down time adjuster

Output

terminals

Six, M4 × 8

5.5

7.6

13.213.2

80 max.

4.6 × 5.6

Oval hole

Operation

indicator

8990100 max. 90±0.2

Two, 4.5-dia. or

M4 holes

50±0.2

G3J-T205BL-C

G3J-T211BL-C

Mounting Hole

Dimensions

G3J-T-C

Safety Precautions

Refer to Safety Precautions for All Solid State Relays.

15.85

44.9

37.1

54.5

117.8

Input terminals

Three, M3 × 8 50 4.6 dia. Stating torque adjuster

Ramp-up time adjuster

Ramp-down time adjuster

Output

terminals

Six, M4 × 8

5.5 130 max.

7.6

13.213.2

100 max.

4.6 × 5.6

Oval hole

Operation

indicator

8990100 max. 90

±0.2

Two, 4.5-dia. or

M4 holes

±0.2

Monitor output

Two, M3 × 8

G3J-T217BL-C

Mounting Hole

Dimensions

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Read and Understand This Catalog

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or

comments.

Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)

from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR

FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS

DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS

IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT

LIABILITY.

In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS

OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT

SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's

application or use of the products.

At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the

products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,

machine, system, or other application or use.

The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible

uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:

•

Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.

•

Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,

safety equipment, and installations subject to separate industry or government regulations.

•

Systems, machines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE

SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND

INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS

Product specifications and accessories may be changed at any time based on improvements and other reasons.

It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.

However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or

establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual

specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the

result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON

Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,

typographical, or proofreading errors, or omissions.

2011.4

In the interest of product improvement, specifications are subject to change without notice.

OMRON Corporation

Industrial Automation Company

http://www.ia.omron.com/