Multilayer Ceramic Chip Capacitors NMC Series NPO FEATURES * CLASS I DIELECTRIC, TEMPERATURE COMPENSATING RoHS * HIGH STABILITY OVER TIME, VOLTAGE AND Compliant TEMPERATURE CHANGES includes all homogeneous materials *See Part Number System for Details * LOW DIELECTRIC LOSS * NICKEL BARRIER TERMINATIONS AND EXCELLENT MECHANICAL STRENGTH * EIA MARKING AVAILABLE SPECIFICATIONS NPO Capacitance Range Capacitance Tolerance 0.47pF to 0.068F Below 10pF: 0.1pF(B), 0.25pF(C), 0.5pF(D) 10pF and above: 1%(F), 2%(G), 5% (J) -55C ~ +125C 0 30ppm/C 25Vdc, 35Vdc, 50Vdc (see NMC-H Series for higher voltages) For values >30pF 0.1% @ 25C; For values < 30pF Q=400+20 x C (C in pF) 100,000Megohms min. or 1000Megohm/F (min.), whichever is less @ +25C 250% of Rated Voltage for 5 1 seconds, 50mA maximum current <1000pF; 1MHz, 1.2Vrms max. or >1000pF; 1KHz, 1.2Vrms max. Operating Temperature Range Temperature Characteristics Rated Voltages Dissipation Factor insulation Resistance Dielectric Withstanding Voltage Test Conditions (EIA-198-2E) 0.4 0.3 0.2 0.1 0.0 -0.1 -0.2 -0.3 -0.4 -55 Typical NPO Temperature Coefficient Voltage Coefficient of Capacitance - NPO 0.2 10,000 0.1 Minimum Insulation Resistance vs Temperature 1000 0.0 100 -0.1 -25 0 25 50 75 100 Temperature (Degrees Celsius) 125 -0.2 10 10 0 10 20 30 40 50 60 70 80 90 100 DC Volts Applied Impedance vs. Frequency NPO Aging Rate - NPO 0.2 1000 100 25 100 150 Temperature (Degrees C) 0.1 1000pF 10 100pF 0.0 1 -0.1 0.1 -0.2 0.01 1 10 100 Frequency (MHz) 1000 1 10 100 Hours 1000 10000 PART NUMBER SYSTEM NMC 0805 NPO 101 J 50 TRP or TRPLP 3K F Series RoHS Compliant Optional Reel Qty (3K=3,000pcs) Tape & Reel (Embossed Plastic Carrier) Tape & Reel (Paper carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros, "R" indicates decimal for under 10pF Temperature Characteristic Size Code (see chart) (R) NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 1 Multilayer Ceramic Chip Capacitors NMC Series NPO NPO CAPACITOR SIZE CHART (mm) (CONSULT FACTORY FOR CAPACITANCE VALUES NOT LISTED) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance W H P P L 100% Matte Sn over Ni barrier 0201 0.60.03 0.30.03 0.33 0.150.05 0402 0603 0805 1.00.05 1.60.15 2.00.2 0.50.05 0.80.15 1.250.2 0.6 1.0 1.35 0.20.1 0.12 ~ 0.51 0.25 ~ 0.71 Working Voltage (Vdc) 10 16 25 50 16 25 50 100 16 25 50 100 16 25 50 100 0.47pF ~ 22pF 24pF 27pF 30pF 33pF 36pF 39pF 43pF 47pF 51pF 56pF 62pF 68pF 75pF 82pF 91pF 100pF 110pF 120pF 130pF 150pF 160pF 180pF 200pF 220pF 240pF 270pF 300pF 330pF 360pF 390pF 430pF 470pF 510pF 560pF 620pF 680pF 750pF 820pF 910pF 0.001F 0.0012F 0.0015F 0.0018F 0.0022F 0.0027F 0.0033F 0.0039F 0.0047F 0.0056F 0.0068F 0.0082F *1.45mm maximum thickness (R) 2 NIC COMPONENTS CORP. * * * * * * * * * * * www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Multilayer Ceramic Chip Capacitors NMC Series NPO NPO CAPACITOR SIZE CHART (mm) EIA Case Size Length (L) Width (W) Thickness max. (T) Termination Width (P) Capacitance 0.47pF ~ 9.1pF 10pF ~ 22pF 24pF ~ 0.001F 0.0012F 0.0015F 0.0018F 0.0022F 0.0027F 0.0033F 0.0039F 0.0047F 0.0056F 0.0068F 0.0075F 0.0082F 0.0091F 0.01F 0.012F 0.015F 0.018F 0.022F 0.027F 0.033F 0.039F 0.047F 0.056F 0805 2.00.2 1.250.2 1.45 0.25 ~ 0.71 1206 3,20.2 1.60.2 1.80 0.25 ~ 0.71 1210 3.20.2 2.50.2 1.80 0.25 ~ 0.71 Working Voltage (Vdc) 16 25 50 100 10 16 25 50 100 10 16 25 50 100 1812 4.50.3 3.20.25 1.80 0.25 ~ 0.76 25 50 100 2225 5.700.4 6.350.25 1.80 0.25 ~ 1.02 50 100 See the previous page * * ** ** ** ** *1.90mm maximum thickness, **2.60mm maximum thickness (R) NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 3