LB E67C, LV E67C, LT E67C
Power TOPLED®
Enhanced optical Power LED (ATON®)
Vorläufige Daten / Preliminary Data
2002-07-02 1
Besondere Merkmale
•Gehäusetyp: weißes P-LCC-4 Gehäuse
•Besonderheit des Bauteils: mehr Licht durch
erhöhten optischen Wirkungsgrad; höhere
Umgebungstemperatur bei gleichem Strom im
Vergleich zur TOPLED® möglich
•Wellenlänge: 469 nm (blau), 503 nm (verde),
525 nm (true green)
•Abstrahlwinkel: Lambertscher Strahler (120°)
•Technologie: InGaN
•optischer Wirkungsgrad: 3 lm/W (blau),
10 lm/W (verde), 13 lm/W (true green)
•Gruppierungsparameter: Lichtstärke,
Wellenlänge
•Verarbeitungsmethode: für alle
SMT-Bestücktechniken geeignet
•Lötmethode: IR Reflow Löten und
Wellenlöten (TTW)
•Vorbehandlung: nach JEDEC Level 2
•Gurtung: 8 mm Gurt mit 2000/Rolle, ø180 mm
oder 8000/Rolle, ø330 mm
•ESD-Festigkeit: ESD-sicher bis 2 kV nach
EOS/ESD-5.1-1993
Anwendungen
•Ampelanwendung (verde)
•Hinterleuchtung (LCD, Schalter, Tasten,
Displays, Werbebeleu chtung ,
Allgemeinbeleuchtung)
•Innenbeleuchtung im Automobilbereich
(z.B. Instrumentenbeleuchtung, u. ä.)
•Ersatz von Kleinst-Glühlampen
•Markierungsbeleuchtung (z.B. Stufen,
Fluchtwege, u.ä.)
•Signal- und Symbolleuchten
•Scanner
Features
•package: white P-LCC-4 package
•feature of the device: more light due to higher
optical efficiency; higher ambient temperature
at the same current possible compared to
TOPLED®
•wavelength: 469 nm (blue), 503 nm (verde),
525 nm (true green)
•viewing angle: Lambertian Emitter (120°)
•technology: InGaN
•optical efficiency: 3 lm/W (blue),
10 lm/W (verde), 13 lm/W (true green)
•grouping parameter: luminous intensity,
wavelength
•assembly methods: suitable for all
SMT assembly methods
•soldering methods: IR reflow soldering and
TTW soldering
•preconditioning: acc. to JEDEC Level 2
•taping: 8 mm tape with 2000/reel, ø180 mm or
8000/reel, ø330 mm
•ESD-withstand voltage: up to 2 kV acc. to
EOS/ESD-5.1-1993
Applications
•traffic lights (verde)
•backlighting (LCD, switches, keys, displays,
illuminated advertising, general lighting)
•interior automotive lighting (e.g. dashboard
backlighting, etc.)
•substitution of micro incandescent lamps
•marker lights (e.g. steps, exit ways, etc.)
•signal and symbol luminaire
•scanners
2002-07-02 2
LB E67C, LV E67C, LT E67C
Anm.: -35 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5)
Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe,
die aus nur 3 bzw. 4 Halbgruppen besteht. Einzelne Halbgruppen sind nicht erhältlich.
In einer Verpackungseinheit / Gurt ist immer nur eine Halbgruppe enthalten.
Note: -35 Total color tolerance range, delivery in single groups (please see page 5)
The standard shipping format for serial types includes a lower or upper family group of 3 or 4
individual groups. Individual half groups are not available.
No packing unit / tape ever contains more than one luminous intensity half group.
Typ
Type
Emissions-
farbe
Color of
Emission
Farbe der
Lichtaustritts-
fläche
Color of the
Light Emitting
Area
Lichtstärke
Luminous
Intensity
IF = 30 mA
IV (mcd)
Lichtstrom
Luminous
Flux
IF = 30 mA
ΦV (mlm)
Bestellnummer
Ordering Code
LB E67C-P2Q2-35
LB E67C-Q2S1-35 blue colorless clear 56 ... 112
90 ... 224 250 (typ.)
470 (typ.) Q62703-Q6235
Q62703-Q6236
LV E67C-S1T1-35
LV E67C-T1U2-35 verde colorless clear 180 ... 355
280 ... 710 800 (typ.)
1480 (typ.) Q62703-Q6286
Q62703-Q6287
LT E67C-S2T2-35
LT E67C-T2V1-35 true green colorless clear 224 ... 450
355 ... 900 1000 (typ.)
1900 (typ.) Q65110-A0273
Q65110-A0274
LB E67C, LV E67C, LT E67C
2002-07-02 3
Grenzwerte
Maximum Ratings
Bezeichnung
Parameter Symbol
Symbol Werte
Values Einheit
Unit
LB LV, LT
Betriebstemperatur
Operating temperature range Top – 40 … + 100 °C
Lagertemperatur
Storage temperature range Tstg – 40 … + 100 °C
Sperrschichttemperatur
Junction temperature Tj+ 110 + 125 °C
Durchlassstrom
Forward current IF30 mA
Stoßstrom
Surge current
t ≤ 10 µs, D = 0.005
IFM 200 250 mA
Sperrspannung
Reverse voltage VR5V
Leistungsaufnahme
Power consumption Ptot 140 mW
Wärmewiderstand
Thermal resistance
Sperrschicht/Umgebung
Junction/ambient
Sperrschicht/Lötpad
Junction/solder point
Montage auf PC-Board FR 4 (Padgröße ≥ 16 mm 2)
mounted on PC board FR 4 (pad size ≥ 16 mm 2)
Rth JA
Rth JS
350
180
K/W
K/W
2002-07-02 4
LB E67C, LV E67C, LT E67C
Kennwerte (TA = 25 °C)
Characteristics
Bezeichnung
Parameter Symbol
Symbol Werte
Values Einheit
Unit
LB LV LT
Wellenlänge des emittierten Lichtes (typ.)
Wavelength at peak emission
IF = 30 mA
λpeak 464 501 520 nm
Dominantwellenlänge 1) (typ.)
Dominant wavelength
IF = 30 mA
λdom 469
± 6 503
± 6 525
± 9 nm
Spektrale Bandbreite bei 50 % Irel max (typ.)
Spectral bandwidth at 50 % Irel max
IF = 30 mA
∆λ 25 30 33 nm
Abstrahlwinkel bei 50 % IV (Vollwinkel) (typ.)
Viewing angle at 50 % IV
2ϕ120 120 120 Grad
deg.
Durchlassspannung 2) (typ.)
Forward voltage (max.)
IF = 30 mA
VF
VF
4.1
4.6 3.8
4.6 3.8
4.6 V
V
Sperrstrom (typ . )
Reverse current (max.)
VR = 5 V
IR
IR
0.01
10 0.01
10 0.01
10 µA
µA
Temperaturkoeffizient von λpeak (typ.)
Temperature coefficient of λpeak
IF = 30 mA; –10°C ≤ T ≤ 100°C
TCλpeak 0.05 0.03 0.04 nm/K
Temperaturkoeffizient von λdom (typ.)
Temperature coefficient of λdom
IF = 30 mA; –10°C ≤ T ≤ 100°C
TCλdom 0.04 0.02 0.03 nm/K
Temperaturkoeffizient von VF(typ.)
Temperature coefficient of VF
IF = 30 mA; –10°C ≤ T ≤ 100°C
TCV– 3. 1 – 3.2 – 3.6 mV/K
Optischer Wirkungsgrad (typ.)
Optical efficiency
IF = 30 mA
ηopt 31013lm/W
1) Wellenlängengruppen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±1 nm ermittelt.
Wavelength groups are tested at a current pulse duration of 25 ms and a tolerance of ±1 nm.
2) Spannungswerte werden mit einer Stromeinpräged auer von 1 ms und eine r Genauigkeit von ±0, 1 V erm ittelt.
Voltage s are tested at a current pulse duration of 1 ms and a t olerance of ±0 .1 V.
LB E67C, LV E67C, LT E67C
2002-07-02 5
Helligkeitswerte w erden mit einer Str om einprägedauer von 25 ms und einer Genauigkeit von ±11% erm it t elt .
Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of ±11%.
1) Wellenlängengruppen / Wavelength groups
Gruppe
Group blue verde true green Einheit
Unit
min. max. min. max. min. max.
3 463 467 497 501 516 522 nm
4 467 471 501 505 522 528 nm
5 471 475 505 509 528 534 nm
Helligkeits-Gruppierungsschema
Luminous Intensity Groups
Lichtgruppe
Luminous Intensity Group Lichtstärke
Luminous Intensity
IV (mcd)
Lichtstrom
Luminous Flux
ΦV (mlm)
P2
Q1
Q2
R1
R2
S1
S2
T1
T2
U1
U2
V1
56 …71
71 …90
90 …112
112 …140
140 …180
180 …224
224 …280
280 …355
355 …450
450 …560
560 …710
710 …900
190 (typ.)
240 (typ.)
300 (typ.)
380 (typ.)
480 (typ.)
600 (typ.)
760 (typ.)
950 (typ.)
1200 (typ.)
1500 (typ.)
1900 (typ.)
2400 (typ.)
Gruppenbezeichnung auf Etikett
Group Name on Label
Beispiel: S2-3
Example: S2-3
Lichtgruppe
Luminous Intensity Group Halbgruppe
Half Group Wellenlänge
Wavelength
S23
2002-07-02 6
LB E67C, LV E67C, LT E67C
Relative spektrale Emission Irel = f (λ), TA = 25 °C, IF = 30 mA
Relative Spectral Emission
V(λ) = spektrale Augenempfindlichkeit
Standard eye response curve
Abstrahlcharakteristik Irel = f (ϕ)
Radiation Characteristic
0
400
true green
550450 500 600 650 nm
λ
700
OHL00492
I
20
40
60
80
%
100
rel
verde
blue
λ
V
0
0.2
0.4
1.0
0.8
0.6
ϕ
1.0 0.8 0.6 0.4
0˚10˚20˚40˚ 30˚
OHL01660
50˚
60˚
70˚
80˚
90˚
100˚ 0˚ 20˚ 40˚ 60˚ 80˚ 100˚ 120˚
LB E67C, LV E67C, LT E67C
2002-07-02 7
Durchlassstrom IF = f (VF)
Forward Current
TA = 25 °C
Maximal zulässiger Durchlassstrom IF = f (T)
Max. Permissible Forward Current
Relative Lichtstärke IV/IV(30 mA) = f (IF)
Relative Luminous Intensity
TA = 25 °C
Maximal zulässiger Durchlassstrom IF = f (T)
Max. Permissible Forward Current
V
OHL01619
1.5
verde,
10
-3
10
-2
10
-1
10
0
10
1
mA
10
2
I
F
2.5 3.5 4.5 5.5 V 6.5
true green
blue
F
OHL01488
0
I
F
T
0
5
10
15
20
25
30
35
40
mA
50
A
T
temp. ambient
20 40 60 80 ˚C 100
Estimated average degradation
= -50%
V
∆
I
5000 h
10000 h
MTTF
MTTF
-1
10
-2
10
10
10
-3
-2
10
210-1
10 10
I
F
10
mA
0
10
V
I
V (30 mA)
I
1
10
OHL00036
verde
true green
blue
OHL11489
0
I
F
T
0
T
temp. solder point
S
20 8040 60 ˚C 100
mA
5
10
15
20
25
30
35
S
> 5000 h
> 10000 h
LB E67C, LV E67C, LT E67C
2002-07-02 8
Relative Lichtstärke IV/IV(25 °C) = f (TA)
Relative Luminous Intensity
IF = 30 mA
Dominante Wellenlänge λdom = f (IF)
Dominant Wavelength
LV, TA = 25 °C
Dominante Wellenlänge λdom = f (IF)
Dominant Wavelength
LB, TA = 25 °C
Dominante Wellenlänge λdom = f (IF)
Dominant Wavelength
LT, TA = 25 °C
OHL01637
-20
0
V(25 ˚C)
A
T
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0 20 40 60 ˚C 100
I
V
I
OHL10198
498
dom
λ
0 mA
nm
20 40 60 80 120
500
502
504
506
508
510
512
I
OHL10196
467
dom
λ
0 mA
nm
20 40 60 80 120
468
469
470
471
472
473
474
I
OHL00199
521
dom
λ
0
F
10 20 30 40 mA 50
523
525
527
529
531
533
535
537
nm
541
true green
539
LB E67C, LV E67C, LT E67C
2002-07-02 9
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA= 25 °C
LB
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA= 25 °C
LT / LV
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA= 85 °C
LB
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA= 85 °C
LT / LV
OHL01578
10-5
F
I
T
P
t
=
D
P
t
T
p
t
F
I
0.005
0.01
0.02
0.05
D =
10-4 10-3 10-2 10-1 100101
0
A
2
10s
0.5
0.2
0.05
0.10
0.15
0.20
0.30
0.1
0.25
OHL01583
10-5
F
I
P
t
T
p
t
F
I
0.005
0.01
0.02
0.05
D =
10-4 10-3 10-2 10-1 100101
0
A
2
10s
0.5
0.05
0.10
0.15
0.20
0.30
0.2
0.1
D
=
T
t
P
0.25
OHL01579
10
-5
F
I
T
P
t
=
D
P
t
T
p
t
F
I
0.005
0.01
0.02
0.05
0.1
D =
10
-4
10
-3
10
-2
10
-1
10
0
10
1
0
A
2
10s
0.5
0.05
0.10
0.15
0.20
0.30
0.2
0.25
OHL01584
10-5
F
I
T
P
t
=
D
P
t
T
F
I
0.005
0.01
0.02
0.05
D =
10-4 10-3 10-2 10-1 100101
0
A
2
10s
0.5
0.05
0.10
0.15
0.20
0.30
0.2
0.1
0.25
2002-07-02 10
LB E67C, LV E67C, LT E67C
Maßzeichnung
Package Outlines
Maße werden wi e fo lgt angegeben: m m (inc h) / Dim ensions are s pecified as follo w s: m m (inch).
Gewicht / Approx. weight: 31 mg
marking
Package
4˚±1
GPLY6991
AC
CC
0.8 (0.031)
0.6 (0.024)
2.6 (0.102)
2.1 (0.083)
2.3 (0.091)
3.0 (0.118)
3.4 (0.134)
3.0 (0.118)
(2.4 (0.094))
0.5 (0.020)
1.1 (0.043)
3.7 (0.146)
3.3 (0.130)
0.12 (0.005)
0.18 (0.007)
0.1 (0.004) typ
0.4 (0.016)
0.6 (0.024)
0.9 (0.035)
0.7 (0.028)
2.1 (0.083)
1.7 (0.067)
LB E67C, LV E67C, LT E67C
2002-07-02 11
Lötbedingungen Vorbehandlung nach JEDEC Level 2
Soldering Conditions Preconditioning acc. to JEDEC Level 2
IR-Reflow Lötprofil (nach IPC 9501)
IR Reflow Soldering Profile (acc. to IPC 9501)
OHLY0597
0
050 100 150 200 250
50
100
150
200
250
300
T
t
˚C
s
240-245 ˚C
10-40 s
183 ˚C
120 to 180 s
Defined for Preconditioning: up to 6 K/s
Ramp-down rate up to 6 K/s
Ramp-up rate up to 6 K/s
Defined for Preconditioning: 2-3 K/s
2002-07-02 12
LB E67C, LV E67C, LT E67C
Wellenlöten (TTW) (nach CECC 00802)
TTW Soldering (acc. to CECC 00802)
OHLY0598
0
050 100 150 200 250
50
100
150
200
250
300
T
t
C
s
235 C
10 s
C... 260
1. Welle
1. wave
2. Welle
2. wave
5 K/s 2 K/s
ca 200 K/s
CC... 130100
2 K/s Zwangskühlung
forced cooling
Normalkurve
standard curve
Grenzkurven
limit curves
LB E67C, LV E67C, LT E67C
2002-07-02 13
Empfohlenes Lötpaddesign IR Reflow Löten
Recommended Solder Pad IR Reflow Soldering
Maße werden wi e fo lgt angegeben: m m (inc h) / Dim ensions are s pecified as follo w s: m m (inch).
OHLPY439
Padgeometrie für
verbesserte Wärmeableitung
improved heat dissipation
Paddesign for
Lötstoplack
Solder resist
1.1 (0.043)
4.5 (0.177)
1.5 (0.059)
2.6 (0.102)
3.3 (0.130)
0.5 (0.020)
7.5 (0.295)
0.4 (0.016)
Cathode marking
Kathoden Markierung / Cu Fläche / 12 mm per pad
2
Cu-area
_
<
3.3 (0.130)
2002-07-02 14
LB E67C, LV E67C, LT E67C
Empfohlenes Lötpaddesign Wellenlöten (TTW)
Recommended Solder Pad TTW Soldering
Maße werden wi e fo lgt angegeben: m m (inc h) / Dim ensions are s pecified as follo w s: m m (inch).
Gurtung / Polarität und Lage Verpackungseinheit 2000/Rolle, ø180 mm
oder 8000/Rolle, ø330 mm
Method of Taping / Polarity and Orientation Packing unit 2000/reel, ø180 mm
or 8000/reel, ø330 mm
Maße werden wi e fo lgt angegeben: m m (inc h) / Dim ensions are s pecified as follo w s: m m (inch).
OHAY0583
6.1 (0.240)
2.8 (0.110)
2 (0.079)
3 (0.118)
6 (0.236)
3.5 (0.138)
1.5 (0.059)
2 (0.079)
3.5 (0.138)1 (0.039)
8 (0.315)
2.8 (0.110) 0.5 (0.020)
7.5 (0.295)
Solder resist
Lötstoplack
PCB-direction
Bewegungsrichtung
der Platine
2 (0.079)
Padgeometrie für
improved heat dissipation
verbesserte Wärmeableitung
Paddesign for
2
Cu Fläche / > 12 mm per pad
Cu-area
OHAY0536
CC
C A
4 (0.157)
2.9 (0.114)
1.5 (0.059) 4 (0.157)
3.6 (0.142)
3.5 (0.138)
2 (0.079)
1.75 (0.069)
8 (0.315)
LB E67C, LV E67C, LT E67C
2002-07-02 15
Published by OSRAM Opto Semiconductors GmbH & Co. OHG
Wernerwerkstrasse 2, D-93049 Regensburg
© All Rights Reserved.
Attention please!
The inform at ion describes the type of co m ponent and sha ll not be c ons idered as assured char ac te ris tics .
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
If printed or download ed, please find the lat es t vers ion in the Inte rnet .
Packing
Please use the recyc ling operat ors known t o you. We can also help y ou – get in touch wit h your near est sales offic e.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components 1 may only be us ed in life-support devices or sys t em s 2 with the express written approval of OSRAM OS.
1 A critical c omponent is a compone nt used in a l ife-support devic e or system whose failure can reasonably be expected
to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or
system.
2 Life sup port device s or syst ems ar e int ended (a ) to b e imp lanted in t he hu man body , or ( b) to supp ort a nd/or main tain
and sust ain human life. If th ey fail , it is rea so nable to assu m e th at the health of the user m ay be endange red.
Revision History: 2002-07-02
Previous Version: 2002-04-03
Page Subjects (major changes since last revision)
4 value (forward voltage)
7 diagram OHL01569/01570 to OHL01488/11489
8 diagram OHL01620/01627/01621 to OHL10196/10198/00199
2 wavelength grouping for blue, true green and verde
