CPC1035N 4 Pin SOP OptoMOS(R) Relay Blocking Voltage Load Current Max On-resistance CPC1035N 350 100 30 Description The CPC1035N is a miniature 1-Form-A solid state relay in a 4 pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS(R) architecture. The optically coupled input is controlled by a highly efficient GaAlAs infrared LED. The CPC1035N uses Clare's state of the art double molded vertical construction packaging to produce the world's smallest relay. The CPC1035N offers board space savings of at least 20% over the competitor's larger 4 pin SOP relay. Units VP mA Features * Small 4 Pin SOP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 1500Vrms Input/Output Isolation * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Tape & Reel Version Available Approvals * UL Recognized Component File #: E76270 * Certified to: EN60950 and IEC950 Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Ordering Information Part # CPC1035N CPC1035NTR CPC1035NTR-1 Description 4 Pin SOP (100/tube) 4 Pin SOP (2000/reel) picked from pin 1 side 4 Pin SOP (100/tube) picked from pin 3 side * For other packaging options consult factory. Pin Configuration CPC1035N Pinout Switching Characteristics of Normally Open (Form A) Devices DS-CPC1035N-R07.6 www.clare.com 1 CPC1035N Absolute Maximum Ratings (@ 25 C) Parameter Blocking Voltage Reverse Input Voltage Input control Current Peak (10ms) Input Power Dissipation Total Power Dissipation Isolation voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature (10 seconds Max.) 1 Ratings 350 5 50 1 150 4001 Units VP V mA A mW mW 1500 Vrms -40 to +85 -40 to +125 C C +220 C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / C Electrical Characteristcs Parameter Output Characteristics @ 25C Load Current1 Peak Load Current On-Resistance2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25C Input Control Current3 Input Dropout Current Input Voltage Drop Reverse Input Current Input to Output Characteristics @ 25C Capacitance Input to Output 1 2 3 2 Conditions Symbol Min Typ Max Units Continuous 10ms IL=100mA VL=350V IL ILPK RON ILEAK 30 - 100 350 35 1 mA mA IF=5mA, VL=10V TON - - 2 ms IF=5mA, VL=10V 50V; f=1MHz TOFF COUT - 25 1.0 - ms pF IL=100mA IF=5mA VR=5V IF IF VF IR 2 0.3 0.9 - 0.9 1.2 - 1.4 10 mA mA V A - - - 1 - pF A Load current derates linearly from 100mA @ 25oC to 70mA @85oC. Measurement taken within 1 second of on time. For applications requiring high temperature operation (greater than 60oC) an LED drive current of 10mA is recommended. www.clare.com Rev. 7.6 CPC1035N PERFORMANCE DATA* 35 30 25 20 15 10 20 15 10 5 0 0 1.17 1.19 1.21 1.23 1.25 27 28 30 31 5 0.75 0.80 377.5 388.5 399.5 410.5 421.5 432.5 443.5 Blocking Voltage (V) CPC1035N Typical IF for Switch Dropout o (Ambient Temperature = 25 C) (Load Current = 100mA) 15 10 5 0.85 CPC1035N Typical Turn-On Time (Ambient Temperature = 25oC) (Load Current = 100mA; IF = 5mA) 25 Device Count (N) 10 0.70 10 32 20 Device Count (N) 15 0.65 15 On-Resistance () 25 Device Count (N) 29 20 0.60 20 0 26 CPC1035N Typical IF for Switch Operation (Ambient Temperature = 25oC) (Load Current = 100mA) 0.55 25 5 LED Forward Voltage Drop (V) 0 CPC1035N Typical Blocking Voltage Distribution (Ambient Temperature = 25oC) 30 25 5 25 35 30 Device Count (N) Device Count (N) CPC1035N Typical On-Resistance Distribution (Ambient Temperature = 25oC) (Load Current = 100mA) Device Count (N) 35 CPC1035N Typical LED Forward Voltage Drop (Ambient Temperature = 25oC) IF = 5mADC 20 15 10 5 0 0 0.55 LED Current (mA) 0.60 0.65 0.70 0.75 0.80 0.50 0.85 0.60 0.70 15 10 5 0.014 140 0.012 120 100 IF =10mA 80 60 IF =5mA 40 0 0.21 0.22 0.23 0.24 0.25 0.26 0.27 425 420 415 410 405 400 395 -40 -20 0 20 0.008 0.006 0.004 -20 0 20 40 60 80 100 120 -40 -20 0 40 60 o Temperature ( C) 80 100 5.000 4.500 4.000 3.500 3.000 2.500 2.000 1.500 1.000 0.500 0 CPC1035N Typical Turn-On vs. Temperature (Load Current = 50mA) IF = 5mA IF = 10mA -40 -20 0 20 40 60 Temperature (oC) 20 40 60 80 100 Temperature (oC) Temperature ( oC) Turn-On (ms) Blocking Voltage (V) 430 0.010 0 -40 Turn-Off (ms) CPC1035N Typical Blocking Voltage vs. Temperature 1.10 0.002 20 Turn-Off (ms) 0 1.00 0.016 160 Leakage (A) 20 0.90 CPC1035N Typical Leakage vs. Temperature (Measured across Pins 3 & 4) IL = max rated CPC1035N Typical Load Current vs. Temperature 180 Load Current (mA) Device Count (N) 25 CPC1035N Typical Turn-Off Time (Ambient Temperature = 25oC) (Load Current = 100mA; IF = 5mA) 0.80 Turn-On (ms) LED Current (mA) 80 100 1.000 0.900 0.800 0.700 0.600 0.500 0.400 0.300 0.200 0.100 0 CPC1035N Typical Turn-Off vs. Temperature (Load Current = 50mA) IF = 10mA -40 -20 0 20 40 60 IF = 5mA 80 100 Temperature ( oC) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 7.6 www.clare.com 3 CPC1035N CPC1035N Typical LED Forward Voltage Drop vs. Temperature 1.6 1.4 IF = 50mA IF = 30mA IF = 20mA IF = 10mA IF = 5mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 Turn-Off (ms) 1.8 0 5 10 Temperature (oC) 3.000 50 2.500 LED Current (mA) 60 40 30 20 0 40 Temperature 60 80 100 Load Current (A) Load Current (mA) 50 0 -50 -100 -1 0 1 Load Voltage (V) 45 50 LED Forward Current (mA) CPC1035N Typical IF for Switch Operation vs. Temperature (Load Current = 50mA) CPC1035N Typical IF for Switch Dropout vs. Temperature (Load Current = 50mA) 3.000 2.500 -40 -20 0 20 40 60 80 100 2 3 2.000 1.500 1.000 0.500 0 -40 -20 0 20 40 60 80 100 Temperature (oC) CPC1035N Energy Rating Curve 100 -2 40 Temperature ( C) 150 -3 35 o (oC) CPC1035N Typical Load Current vs. Load Voltage (Ambient Temperature = 25oC) IF = 5mA -150 30 1.000 0.500 20 25 1.500 0 0 20 2.000 10 -20 15 LED Forward Current (mA) LED Current (mA) CPC1035N Typical On-Resistance vs. Temperature (Load Current = 50mA; IF = 10mA) -40 CPC1035N Typical Turn-Off vs. LED Forward Current (Load Current = 100mA) CPC1035N Typical Turn-On vs. LED Forward Current (Load Current = 100mA) Turn-On (ms) LED Forward Voltage Drop (V) PERFORMANCE DATA* 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 7.6 PERFORMANCE DATA* PC Board Pattern (Top View) 0.38 TYP. (0.015 TYP.) 4 Pin SOIC Narrow ("N" Suffix) 1.448 (0.057) 2.18 MAX. (0.086) 0.889 (0.035) 2.54 TYP. (0.100 TYP.) Tape and Reel Packaging for 4 pin SOIC package A0 = 6.50 (0.256) 330.2 DiA (13.00" DiA) P = 8.00 (0.315) A Top Cover Tape Thickness 0.102 MAX (0.004 MAX) B0 = 4.70 (0.185) K1 = 2.30 (0.091) W = 12.00 MAX (0.472 MAX) K0 = 2.7 (0.106) A SECTION A-A NOTE: Tape dimensions not shown, comply with JEDEC Standard EIA-481-2 Embossed Carrier Embossment CPC1035NTR CPC1035NTR-1 Dimensions: mm (inches) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1035N-R07.6 (c)Copyright 2004, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 10/20/04