AUNA-202 1.0 W 14-16 Volts, DC- 200MHz Features Introduction The AUNA-202 is a 50 Ohm hybrid amplifier module designed for broadband operation in Class A amplifier driver applications operating from DC to 200MHz. Its wide dynamic range and flexibility make it ideal for a broad spectrum of instrurmentation, receiver, and transmitter applications. - Gold Metalized - Internally matched to 50 Ohms - Caccadeable - Wide dynamic range Symbol 1 ELECTRICAL CHARACTERISTICS at Tcase = 25 Deg C. Typ. Max. Units Test Conditions Characteristics Min. Ga Small signal Gain Delta Ga Gain Flatness P1dB Pout @ 1dB Comp. VSWR Input Mismatch Vdc Operating voltage Delta Tjf +50 C NF Temp. Rise Junction to Flange Noise Figure 5.0 dBm Freq = 70MHz Idc = 350mA IP3 3rd Order Intercept +50 dBm Freq = 30 MHz Idc = 350mA T Oper. Operating Temp. -55 +125 Deg C T Stor. Storage Temp -55 +150 Deg C Caution: Device contains Beryllium Oxide 12.0 13.0 +/- 0.5 +30 14.0 dBm +/- 1 +32 dB Freq = 1 -200MHz Idc = 350mA dBm 1.5:1 2.0:1 15.0 16.0 Volts * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. AUNA-202 1.0 W 14-16 Volts, DC- 200MHz 2