Tel: 800 -284-7007
www.rfswitches.com
email: switches@teledyne.com
8
Specifications subject to change without notice.
01/2004
Commercial CCR-33
Miniature DC-18GHz SPDT Switch
Failsafe
The CCR-33 Switch is a broadband, SPDT, electromechanical, coaxial switch designed to
switch a microwave signal from a common input to either of two outputs. The characteristic
impedance is 50 Ohms. The switches are small with connector spacing compatible with SMA
connectors.
The CCR-33 series switch is offered with either a failsafe or latching actuator. This design is
compatible with the two most common mounting hole patterns. The CCR-33 series switch is
interchangeable with a variety of
switches.
If your requirements are more demand-
ing then perhaps the CCM-33 Range
of 10 Million cycle switches would be of
interest.
3000
800
400
200
80
40
10
Power CW (Watts)
0.1 1.0 4.0 10 18
Frequency GHz
Standard SMA Connectors
Specifications
RF Contacts: Break before make
Actuator Voltage (VDC) 20O C 121528
Current (mA) 200 160 90
Switching Time: 20 msec max
Connectors: SMA (f)
Weight: 1.65 oz. max
Temperature Range: -25O C to +65O C (Operating)
Shock: MIL-STD-202 Method 213, Condition D (500G Non Operating)
Vibration: MIL-STD-202 Method 214, Condition D (10G RMS Non Operating)
Humidity: Moisture Seal Available
MTBF: 7.3 Million Hours ( MIL-HDBK-217F Fixed, 25O C, <1 Cycle per hour)
RF Power Handling
Specifications DC-6 GHz 6-12 GHz 12-18 GHz
VSWR (max) 1.25:1 1.40:1 1.50:1
Insertion Loss (min) 0.20 dB 0.40 dB 0.50 dB
Isolation (max) 70.0 dB 60.0 dB 60.0 dB
Typical Performance
15
25
Return Loss
0.01 18.0
Frequency GHz
0.01 18.0
Frequency GHz
0.0
0.4
IL dB
Isolation dB
90
80
70
60