SFH615A/SFH6156
Document Number 83671
Rev. 2.0, 06-Sep-06
Vishay Semiconductors
www.vishay.com
1
1
2
4
3E
C
A
C
17448
1
1
Optocoupler, Phototransistor Output, High Reliability,
5300 VRMS
Features
Excellent CTR Linearity Depending on
Forward Current
Isolation Test Voltage, 5300 VRMS
Fast Switching Times
Low CTR Degradation
Low Coupling Capacitance
Lead (Pb)-free component
Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
Agency Approvals
UL1577, File No. E52744 System Code H or J,
Double Protection
DIN EN 60747-5-2 (VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
Applications
Switchmode power supply
Telecom
Battery powered equipment
Description
The SFH615A (DIP) and SFH6156 (SMD) feature a
variety of transfer ratios, low coupling capacitance
and high isolation voltage. These couplers have a
GaAs infrared diode emitter, which is optically cou-
pled to a silicon planar phototransistor detector, and
is incorporated in a plastic DIP-4 or SMD package.
The coupling devices are designed for signal trans-
mission between two electrically separated circuits.
The couplers are end-stackable with 2.54 mm lead
spacing.
Creepage and clearance distances of > 8.0 mm are
achieved with option 6. This version complies with
IEC 60950 (DIN VDE 0805) for reinforced insulation
up to an operation voltage of 400 VRMS or DC.
Specifications subject to change.
Order Information
For additional information on the available options refer to Option
Information.
See TAPE AND REEL Section for 4-pin optocouplers T0 with 90°
rotation.
Part Remarks
SFH615A-1 CTR 40 - 80 %, DIP-4
SFH615A-2 CTR 63 - 125 %, DIP-4
SFH615A-3 CTR 100 - 200 %, DIP-4
SFH615A-4 CTR 160 - 320 %, DIP-4
SFH6156-1 CTR 40 - 80 %, SMD-4
SFH6156-2 CTR 63 - 125 %, SMD-4
SFH6156-3 CTR 100 - 200 %, SMD-4
SFH6156-4 CTR 160 - 320 %, SMD-4
SFH615A-1X006 CTR 40 - 80 %, DIP-4 400 mil (option 6)
SFH615A-1X007 CTR 40 - 80 %, SMD-4 (option 7)
SFH615A-2X006 CTR 63 - 125 %, DIP-4 400 mil (option 6)
SFH615A-2X007 CTR 63 - 125 %, SMD-4 (option 7)
SFH615A-2X009 CTR 63 - 125 %, SMD-4 (option 9)
SFH615A-3X006 CTR 100 - 200 %, DIP-4 400 mil (option 6)
SFH615A-3X007 CTR 100 - 200 %, SMD-4 (option 7)
SFH615A-3X008 CTR 100 - 200 %, SMD-4 (option 8)
SFH615A-3X009 CTR 100 - 200 %, SMD-4 (option 9)
SFH615A-4X006 CTR 160 - 320 %, DIP-4 400 mil (option 6)
SFH615A-4X007 CTR 160 - 320 %, SMD-4 (option 7)
SFH615A-4X008 CTR 160 - 320 %, SMD-4 (option 8)
SFH615A-4X009 CTR 160 - 320 %, SMD-4 (option 9)
e3
www.vishay.com
2
Document Number 83671
Rev. 2.0, 06-Sep-06
SFH615A/SFH6156
Vishay Semiconductors
Absolute Maximum Ratings
Tamb = 25 °C, unless otherwise specified
Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is
not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
Maximum Rating for extended periods of the time can adversely affect reliability.
Input
Output
Coupler
Parameter Test condition Symbol Value Unit
Reverse voltage VR6.0 V
DC Forward current IF60 mA
Surge forward current tp 10 µs IFSM 2.5 A
Parameter Test condition Symbol Value Unit
Collector-emitter voltage VCE 70 V
Emitter-collector voltage VCEO 7.0 V
Collector current IC50 mA
tp 1.0 ms IC100 mA
Parameter Test condition Symbol Value Unit
Isolation test voltage (between
emitter and detector, refered to
climate DIN 40046, part 2,
Nov. 74
t = 1.0 s VISO 5300 VRMS
Creepage 7.0 mm
Clearance 7.0 mm
Insulation thickness between
emitter and detector
0.4 mm
Comparative tracking index per
DIN IEC 112/VDE 0303, part 1
175
Isolation resistance VIO = 500 V, Tamb = 25 °C RIO 1012 Ω
VIO = 500 V, Tamb = 100 °C RIO 1011 Ω
Storage temperature range Tstg - 55 to + 150 °C
Ambient temperature range Tamb - 55 to + 100 °C
Soldering temperature max. 10 s, Dip soldering
distance to seating plane
1.5 mm
Tsld 260 °C
0
50
100
150
200
0 25 50 75 100 125 150
18483
P - Power Dissipation (mW)
tot
Phototransistor
Diode
Tamb- Ambient Temperature (°C)
Figure 1. Permissible Power Dissipation vs. Ambient Temperature
SFH615A/SFH6156
Document Number 83671
Rev. 2.0, 06-Sep-06
Vishay Semiconductors
www.vishay.com
3
Thermal Characteristics
The thermal model is represented in the thermal network below. Each resistance value given in this model can be used to calculate the tem-
peratures at each node for a given operating condition. The thermal resistance from board to ambient will be dependent on the type of PCB,
layout and thickness of copper traces. For a detailed explanation of the thermal model, please reference Vishay's Thermal Characteristics
of Optocouplers Application note.
* For 2 layer FR4 board (4" x 3" x 0.062)
Parameter Test condition Symbol Value Unit
LED Power dissipation at 25 °C Pdiss 100 mW
Output Power dissipation at 25 °C Pdiss 150 mW
Maximum LED junction temperature Tjmax 125 °C
Maximum output die junction temperature Tjmax 125 °C
Thermal resistance, Junction Emitter to Board θEB 173 °C/W
Thermal resistance, Junction Emitter to Case θEC 149 °C/W
Thermal resistance, Junction Detector to Board θDB 111 °C/W
Thermal resistance, Junction Detector to Case θDC 127 °C/W
Thermal resistance, Junction Emitter to Junction Detector θED 95 °C/W
Thermal resistance, Board to Ambient* θBA 195 °C/W
Thermal resistance, Case to Ambient* θCA 3573 °C/W
TA
θ
CA
TC
TJD TJE
TB
θEC
θEB
θDC
θDB
θBA
θ
DE
TA
19996
Package
www.vishay.com
4
Document Number 83671
Rev. 2.0, 06-Sep-06
SFH615A/SFH6156
Vishay Semiconductors
Electrical Characteristics
Tamb = 25 °C, unless otherwise specified
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
Input
Output
Coupler
Current Transfer Ratio
Parameter Test condition Symbol Min Typ. Max Unit
Forward voltage IF = 60 mA VF1.25 1.65 V
Reverse current VR = 6.0 V IR0.01 10 µA
Capacitance VR = 0 V, f = 1.0 MHz CO13 pF
Parameter Test condition Part Symbol Min Typ. Max Unit
Collector-emitter capacitance VCE = 5.0 V, f = 1.0 MHz CCE 5.2 pF
Collector-emitter leakage
current
VCE = 10 V SFH615A-1
SFH6156-1
ICEO 2.0 50 nA
SFH615A-2
SFH6156-2
ICEO 2.0 50 nA
SFH615A-3
SFH6156-3
ICEO 5.0 100 nA
SFH615A-4
SFH6156-4
ICEO 5.0 100 nA
Parameter Test condition Symbol Min Typ. Max Unit
Collector-emitter saturation
voltage
IF = 10 mA, IC = 2.5 mA VCEsat 0.25 0.4 V
Coupling capacitance CC0.4 pF
Parameter Te s t c o n d i t i o n Part Symbol Min Typ. Max Unit
IC/IFIF = 10 mA, VCE = 5.0 V SFH615A-1
SFH6156-1 CTR 40 80 %
SFH615A-2
SFH6156-2 CTR 63 125 %
SFH615A-3
SFH6156-3 CTR 100 200 %
SFH615A-4
SFH6156-4 CTR 160 320 %
IF = 1.0 mA, VCE = 5.0 V SFH615A-1
SFH6156-1 CTR 13 30 %
SFH615A-2
SFH6156-2 CTR 22 45 %
SFH615A-3
SFH6156-3 CTR 34 70 %
SFH615A-4
SFH6156-4 CTR 56 90 %
SFH615A/SFH6156
Document Number 83671
Rev. 2.0, 06-Sep-06
Vishay Semiconductors
www.vishay.com
5
Switching Characteristics
Switching Non-saturated
Switching Saturated
Parameter Test condition Symbol Min Ty p. Max Unit
Rise Time IF = 10 mA, VCC = 5.0 V, TA = 25 °C, RL = 75 Ωtr2.0 µs
Fall Time IF = 10 mA, VCC = 5.0 V, TA = 25 °C, RL = 75 Ωtf2.0 µs
Turn-on time IF = 10 mA, VCC = 5.0 V, TA = 25 °C, RL = 75 Ωton 3.0 µs
Turn-off time IF = 10 mA, VCC = 5.0 V, TA = 25 °C, RL = 75 Ωtoff 2.3 µs
Cut-off
frequency
IF = 10 mA, VCC = 5.0 V, TA = 25 °C, RL = 75 Ωfctr 250 kHz
Parameter Test condition Part Symbol Min Ty p. Max Unit
Rise time VCC = 5.0 V, TA = 25 °C, RL = 1 kΩ, IF = 20 mA SFH615A-1
SFH6156-1
tr2.0 µs
VCC = 5.0 V, TA = 25 °C, RL = 1 kΩ, IF = 10 mA SFH615A-2
SFH6156-2
tr3.0 µs
SFH615A-3
SFH6156-3
tr3.0 µs
VCC = 5.0 V, TA = 25 °C, RL = 1 kΩ, IF = 5.0 mA SFH615A-4
SFH6156-4
tr4.6 µs
Fall time VCC = 5.0 V, TA = 25 °C, RL = 1 kΩ, IF = 20 mA SFH615A-1
SFH6156-1
tf11 µs
VCC = 5.0 V, TA = 25 °C, RL = 1 kΩ, IF = 10 mA SFH615A-2
SFH6156-2
tf14 µs
SFH615A-3
SFH6156-3
tf14 µs
VCC = 5.0 V, TA = 25 °C, RL = 1 kΩ, IF = 5.0 mA SFH615A-4
SFH6156-4
tf15 µs
Turn-on time VCC = 5.0 V, TA = 25 °C, RL = 1 kΩ, IF = 20 mA SFH615A-1
SFH6156-1
ton 3.0 µs
VCC = 5.0 V, TA = 25 °C, RL = 1 kΩ, IF = 10 mA SFH615A-2
SFH6156-2
ton 4.2 µs
SFH615A-3
SFH6156-3
ton 4.2 µs
VCC = 5.0 V, TA = 25 °C, RL = 1 kΩ, IF = 5.0 mA SFH615A-4
SFH6156-4
ton 6.0 µs
Turn-off time VCC = 5.0 V, TA = 25 °C, RL = 1 kΩ, IF = 20 mA SFH615A-1
SFH6156-1
toff 18 µs
VCC = 5.0 V, TA = 25 °C, RL = 1 kΩ, IF = 10 mA SFH615A-2
SFH6156-2
toff 23 µs
SFH615A-3
SFH6156-3
toff 23 µs
VCC = 5.0 V, TA = 25 °C, RL = 1 kΩ, IF = 5.0 mA SFH615A-4
SFH6156-4
toff 25 µs
www.vishay.com
6
Document Number 83671
Rev. 2.0, 06-Sep-06
SFH615A/SFH6156
Vishay Semiconductors
Typical Characteristics
Tamb = 25 °C, unless otherwise specified
Figure 2. Linear Operation (without Saturation)
Figure 3. Switching Operation (with Saturation)
Figure 4. Current Transfer Ratio (typical) vs. Temperature
isfh615a_01
R
L
=75Ω
V
CC
=5V
I
C
47 Ω
I
F
isfh615a_02
1Ω
VCC =5V
47 Ω
IF
isfh615a_01
- 25 0 25 50 °C 75
10
3
10
2
10
1
5
5
%
IC
I
F
TA
4
3
2
1
IF=10mA,VCE = 5.0 V
Figure 5. Output Characteristics (typ.) Collector Current vs.
Collector-Emitter Voltage
Figure 6. Diode Forward Voltage (typ.) vs. Forward Current
Figure 7. Transistor Capacitance (typ.) vs.
Collector-Emitter Voltage
isfh615a_04
30
20
10
0
0510V15
IF=14 mA
2.0 mA
4.0 mA
6.0 mA
8.0 mA
10 mA
12 mA
1.0 mA
mA
IC
VCE
isfh615a_05
VF
IF
25°
50°
75°
1.2
1.1
1.0
0.9
10-1 10 0101mA 102
V
isfh615a_06
20
15
10
5
0
pF
C
V
e
10 -2 10 -1 10-0 101V102
CCE
f = 1.0 MHz
SFH615A/SFH6156
Document Number 83671
Rev. 2.0, 06-Sep-06
Vishay Semiconductors
www.vishay.com
7
Package Dimensions in Inches (mm)
Figure 8. Permissible Pulse Handling Capability Forward Current
vs. Pulse Width
isfh615a_07
I
F
t
p
10
- 5
10
- 4
10
- 3
10
- 2
10
- 1
10
0
s10
1
10
4
10
3
10
2
10
1
5
5
5
mA
D= t
p
T
t
p
I
F
T
D = 0
0.005
0.01
0.02
0.05
0.1
0.2
0.5
DC Pulse cycle D = parameter
i178027
0.255 (6.48)
0.268 (6.81)
1
2
4
3
0.179 (4.55)
0.190 (4.83)
pin one ID
0.030 (0.76)
0.045 (1.14)
typ.
0.100 (2.54)
0.130 (3.30)
0.150 (3.81)
0.020 (0.508)
0.035 (0.89)
10°
3° - 9°
0.018 (0.46)
0.022 (0.56)
0.008 (0.20)
0.012 (0.30)
0.031 (0.79) typ.
0.050 (1.27) typ.
0.300 (7.62) typ.
0.110 (2.79)
0.130 (3.30)
0.230 (5.84)
0.250 (6.35)
0.050 (1.27)
ISO Method A
www.vishay.com
8
Document Number 83671
Rev. 2.0, 06-Sep-06
SFH615A/SFH6156
Vishay Semiconductors
Package Dimensions in Inches (mm)
i178029_1
0.255 (6.48)
0.268 (6.81)
34
0.179 (4.55)
0.190 (4.83)
pin one ID
0.030 (0.76)
0.045 (1.14)
typ.
1.00 (2.54) typ.
0.130 (3.30)
0.150 (3.81)
0.098 (0.249)
0.035 (0.102) 0.020 (0.508)
0.040 (1.02)
0.031 (0.79)
typ.
0.050 (1.27)
typ.
0.010 (0.25)
typ.
10°
3° - 7°
0.375 (9.52)
0.395 (10.03)
0.296 (7.52)
0.312 (7.90)
0.315 (8.00)
min.
Lead
coplanarity
0.004 max.
SMD
ISO Method A
0.100 (2.54) R 0.010 (0.25)
0.070 (1.78)
0.030 (0.76)
0.315 (8.00) min 0.060 (1.52)
0.435 (11.05)
min.
15° max.
Option 9
18486
0.375 (9.53)
0.395 (10.03)
0.300 (7.62) ref.
0.020 (0.51)
0.040 (1.02)
0.315 (8.00)
0.0040 (0.102)
0.0098 (0.249)
0.012 (0.30) typ.
SFH615A/SFH6156
Document Number 83671
Rev. 2.0, 06-Sep-06
Vishay Semiconductors
www.vishay.com
9
Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and operating
systems with respect to their impact on the health and safety of our employees and the public, as well as
their impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are
known as ozone depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs
and forbid their use within the next ten years. Various national and international initiatives are pressing for an
earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use
of ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments
respectively
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency (EPA) in the USA
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting
substances and do not contain such substances.
We reserve the right to make changes to improve technical design
and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each
customer application by the customer. Should the buyer use Vishay Semiconductors products for any
unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all
claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal
damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 83714
Rev. 1.7, 11-Oct-05
Vishay Semiconductors
www.vishay.com
1
Packaging, Tape and Reel Information
Description
Optocouplers are available in plastic dual-in-line
packages (DIP), SOP packages, and in a surface-
mount, gull-wing, lead bend configuration. Optocou-
plers purchased in the DIP configuration are shipped
in tubes. Optocouplers purchased in a gull-wing con-
figuration can be shipped in tubes or on carrier tape.
This section provides stick specifications, tape and
reel specifications, and component information.
Tube Specifications
Figure 1 shows the physical dimensions of transpar-
ent, antistatic, plastic shipping tubes. Figure 2 shows
tube safety agency labeling and orientation informa-
tion.
The following table lists the number of parts per tube.
Devices per Tube
Package Quantity
4-pin DIP 90
6-pin DIP 50
6-pin gull wing 50
8-pin DIP 50
8-pin gull wing 50
8-pin SOP 90
16-pin DIP 20
16-pin SOP 40
Figure 1. Shipping Tube Specifications for DIP Packages
MADE IN MALAYSIA
ANTISTATIC
Detail A
.02
(200 ±.5)
15.2 ±.004
(380 ±1)
.12 ±.02 (3 ±.5)
.02
(125 ±.5)
1.2 ±.02
(30 ±.5)
.02
(150 ±.5)
10.4 ±.02
(260 ±.5)
13.2 ±02
(330 ±.5)
.04 (1.0)
21.12 ±.08
(528 ±.2)
Detail B
Detail A Detail B
.48 ±.012
(12 ±0.3)
.264 ±.012
(6.6 ±0.3)
.03 ±.012
(.6 ±.1)
.44 ±.012
(11 ±0.3)
2.7 ±0.2
.176 ±,012
(4.4 ±0.3)
10°
.228 ±.006
(5.7 ±.15)
Section A-B
B
R.00
4
(0.1)
R.02
(0.5)
.04 (1.0)
.06 (1.5) 14X
/ / 008 (0.2) B
13X.4=52
(13 X 10 = 130)
.4 (10)
A
B
.04 (1.0)
Not to scale
Transparent rigid PVC
A
.03±.02
(.7±.5)
Dimensions in inches (mm)
17996
OPTOSEMICONDUCTOR
VISHAY
www.vishay.com
2
Document Number: 83714
Rev. 1.7, 11-Oct-05
Vishay Semiconductors
Tube Specifications for DIP and High Isolation Voltage Packages
Figure 2. Shipping Tube Specifications for SOP Packages
Side View
scale: 4X
Top View
not to scale
.46 ±.01
(11.5 ±.25)
.344 ±.01
(8.6 ±.25)
.058 ±.008
(1.46 ±.19)
.104 ±.01
(2.6 ±.25)
.22.4 ±.04
(558.8 ±.1.0)
.03 ±.01
(0.7 ±.25)
.03 ±.005
(0.7 ±.13)
4 (100)
.312 ref.
(7.8 ref.)
Dimensions in inches (mm)
17997
OPTOSEMICONDUCTOR
ANTISTATIC
VISHAY
Figure 3. DIP-6 N, G
1
5912
Figure 4. DIP-4, -2, -16 N, G
15915
Document Number: 83714
Rev. 1.7, 11-Oct-05
Vishay Semiconductors
www.vishay.com
3
Tape and Reel Specifications
Surface-mounted devices are packaged in embossed
tape and wound onto 13-inch molded plastic reels for
shipment, to comply with Electronics Industries Asso-
ciation Standard EIA-481, revision A.
Leaders and Trailers
The carrier tape and cover tape are not spliced. Both
tapes are one single uninterrupted piece from end to
end, as shown in Figure 2. Both ends of the tape have
empty pockets meeting these requirements.
Trailer end (inside hub of reel) is 200 mm mini-
mum.
Leader end (outside of reel) is 400 mm minimum
and 560 mm maximum.
Unfilled leader and trailer pockets are sealed.
Leaders and trailers are taped to tape and hub,
respectively, with masking tape.
All materials are static-dissipative
Reels
As shown in Figure 4, all reels contain standard
areas for the placement of ESD stickers and
labels. Each reel also has a tape slot in its core.
The overall reel dimension is 13 inches. Reels
contain 1000 6- or 8-pin gull-wing parts and could
have up to three inspection lots.
Figure 5. CNY64
Figure 6. CNY65, 66
15913
15914
Figure 7. Tape and Reel Shipping Medium
Figure 8.
Top cover tape
Embossment
Embossed carrier
17998
ESD Sticker
Tape slot
in core
13"
Regular, special
or bar code label
17999
www.vishay.com
4
Document Number: 83714
Rev. 1.7, 11-Oct-05
Vishay Semiconductors
Tape and Reel Packaging for Single Channel SOIC8 Optocouplers
Selected SOIC8 optocouplers are available in tape
and reel format. To order surface mount IL2XXA opto-
coupler on tape and reel, add a suffix "T" after the part
number, i.e., IL207AT.
The tape is 12 mm wide on a 33 cm reel. There are
200 parts per reel. Taped and reeled SOIC8-A opto-
couplers conform to EIA-481-2.
Tape and Reel Packaging for Dual Channel SOIC8 Optocouplers
Selected dual SOIC8 optocouplers are available in
tape and reel format. To order surface mount ILD2XX
optocoupler on tape and reel, add a suffix "T" after the
part number, i.e., ILD207T.
The tape is 16 mm and is wound on a 33 cm reel.
There are 2000 parts per reel. Taped and reeled dual
SOIC8 optocouplers conform to EIA-481-2.
Embossment
Direction of Feed
Center Lines
of Cavity
10 Pitch Cumulative
Tolerance on Tape
±0.2 (0.008)
1.5 (.059)min.
1.5 (.059)
1.75±0.1
(.069±.004)
Pin 1 and Top
of Component
Top
Cover
Tape
0.1 (.004) max.
12.0±.3
(.472±.012)
18003
4±0.1 (1.57±.004)
2±0.05 (.079±.002)
8.0±0.1 (.315±.004)
3.78 (.149)
0.35 (.014)
9.2 (.36)
6.4 (.252)
5.25 (.205)
5.5 (.216)
Embossment
Direction of Feed
Center Lines
of Cavity
10 Pitch Cumulative
Tolerance on Tape
±0.2 (0.008)
1.5 (.059)min.
1.5 (.059)
1.75±0.1
(.069±.004)
Pin 1 and Top
of Component
Top
Cover
Tape
13.3 (.523)
0.3 (.012) max.
0.1 (.004) max.
16.0±.3
(.630±.012)
18004
4±0.1 (1.57±.004)
2±0.05 (.079±.002)
6.6 (.26)
6.35 (.25)
8.0 (.315)
7.5±.05
(.300±.002)
3.8 (.15)
Document Number: 83714
Rev. 1.7, 11-Oct-05
Vishay Semiconductors
www.vishay.com
5
Tape and Reel Packaging for DIP-4 Optocouplers with Option 9
Selected 4-pin optocouplers are available in tape and
reel format. To order any SFH6XX6 optocoupler on
tape and reel, add a suffix "T" after the part number,
i.e., SFH6156-3T.
The tape is 16 mm and is wound on a 33 cm reel.
There are 1000 parts per reel. Taped and reeled 4-pin
optocouplers conform to EIA-481-2.
Tape and Reel Packaging for DIP-4 Optocouplers with Option 9, 90 ° Rotation
Selected 4-pin optocouplers are available in tape and
reel format.
The tape is 16 mm and is wound on a 33 cm reel.
There are 2000 parts per reel. Taped and reeled 4-pin
optocouplers conform to EIA-481-2.
Embossment
Direction of Feed
Center Lines
of Cavity
10 Pitch Cumulative
Tolerance on Tape
±0.2 (0.008)
1.5 (.059)min.
1.5 (.059)
1.75±0.1
(.069±.004)
Pin 1 and Top
of Component
Top
Cover
Tape
13.3 (.523)
4.07 (.160)
0.3 (.012) max.
0.1 (.004) max.
16.0±.3
(.630±.012)
18005
4±0.1 (1.57±.004)
2±0.05 (.079±.002)
10.2 (.402)
5.05 (.2)
12.0 (.472)
7.5±.05
(.295±.002)
4.92±0.10
(.194±.004
16.00+0.30, -0.10
(.013(.0008),-.0004)
18401
4±0.1
(.157±.004) 1.5+0.10, -0.00
(.59 ±.004)
1.75±0.1
(.069±.004)
7.5±.01
(.295±.004)
2±0.10
(.079±.004)
8.0±0.10
(.315+.004
10.36±0.10
.408±.004
10.36±0.10
.408±.004
4.92±0.10
.194±.004
1.5+0.25,-0.0
.059+.001,-0.0
www.vishay.com
6
Document Number: 83714
Rev. 1.7, 11-Oct-05
Vishay Semiconductors
Tape and Reel Packaging for DIP-6 Optocouplers with Option 7
Selected 6-pin optocouplers with Option 7 are avail-
able in tape and reel format. To order 6-pin optocou-
pler with Option 7 on tape and reel, add a suffix "T"
after the option, i.e., CNY17-3X007T.
The tape is 16 mm and is wound on a 33 cm reel.
There are 1000 parts per reel. Taped and reeled 6-pin
optocouplers conform to EIA-481-2.
Tape and Reel Packaging for DIP-6 Optocouplers with Option 9
Selected 6-pin optocouplers with Option 9 are avail-
able in tape and reel format. To order 6-pin optocou-
pler with Option 9 on tape and reel, add a suffix "T"
after the option, i.e., CNY17-3X009T.
The tape is 16 mm and is wound on a 33 cm reel.
There are 1000 parts per reel. Taped and reeled 6-pin
optocouplers conform to EIA-481-2.
Embossment
Direction of Feed
Center Lines
of Cavity
10 Pitch Cumulative
Tolerance on Tape
±0.2 (0.008)
1.5 (.059)min.
1.5 (.059)
1.75±0.1
(.069±.004)
Pin 1 and Top
of Component
Top
Cover
Tape
13.3 (.523)
4.57 (.180)
0.35 (.014)
0.1 (.004) max.
16.0±.3
(.630±.012)
18006
4±0.1 (1.57±.004)
2±0.05 (.079±.002)
10.4 (.410)
9.0 (.354)
12.0 (.472)
7.5±.05
(.295±.002)
Embossment
Direction of Feed
Center Lines
of Cavity
10 Pitch Cumulative
Tolerance on Tape
±0.2 (0.008)
1.5 (.059)min.
1.5 (.059)
1.75±0.1
(.069±.004)
Pin 1 and Top
of Component
Top
Cover
Tape
13.3 (.523)
4.09 (.161)
0.3 (.012) max.
0.1 (.004) max.
16.0±.3
(.630±.012)
18007
4±0.1 (1.57±.004)
2±0.05 (.079±.002)
10.35 (.407)
9.14 (.36)
12.0 (.472)
7.5±.05
(.295±.002)
Document Number: 83714
Rev. 1.7, 11-Oct-05
Vishay Semiconductors
www.vishay.com
7
Tape and Reel Packaging for DIP-8 Optocouplers with Option 7
Selected 8-pin optocouplers with Option 9 are avail-
able in tape and reel format. To order 8-pin optocou-
pler with Option 7 on tape and reel, add a suffix "T"
after the option, i.e., ILCT6-X007T.
The tape is 16 mm and is wound on a 33 cm reel.
There are 1000 parts per reel. Taped and reeled 8-pin
optocouplers conform to EIA-481-2.
Tape and Reel Packaging for DIP-8 Optocouplers with Option 9
Selected 8-pin optocouplers with Option 9 are avail-
able in tape and reel format. To order 8-pin optocou-
pler with Option 9 on tape and reel, add a suffix "T"
after the option, i.e., ILCT6-X009T.
The tape is 16 mm and is wound on a 33 cm reel.
There are 1000 parts per reel. Taped and reeled 8-pin
optocouplers conform to EIA-481-2.
Embossment
Direction of Feed
Center Lines
of Cavity
10 Pitch Cumulative
Tolerance on Tape
±0.2 (0.008)
1.5 (.059)min.
1.5 (.059)
1.75±0.1
(.069±.004)
Pin 1 and Top
of Component
Top
Cover
Tape
13.3 (.523)
4.7 (.185)
0.35 (.014)
0.1 (.004) max.
16.0±.3
(.630±.012)
18008
4±0.1 (1.57±.004)
2±0.05 (.079±.002)
10.41 (.410)
10.21 (.402)
12.0 (.472)
7.5±.05
(.295±.002)
Embossment
Direction of Feed
Center Lines
of Cavity
10 Pitch Cumulative
Tolerance on Tape
±0.2 (0.008)
1.5 (.059)min.
1.5 (.059)
1.75±0.1
(.069±.004)
Pin 1 and Top
of Component
Top
Cover
Tape
13.3 (.523)
4.17 (.164)
0.35 (.014)
0.1 (.004) max.
16.0±.3
(.630±.012)
18009
4±0.1 (1.57±.004)
2±0.05 (.079±.002)
10.2 (.402)
10.31 (.406)
12.0 (.472)
7.5±.05
(.295±.002)
www.vishay.com
8
Document Number: 83714
Rev. 1.7, 11-Oct-05
Vishay Semiconductors
Tape and Reel Packaging for DIP-16, SMD Optocouplers with Option 7
Selected 16-pin optocouplers with Option 7 are avail-
able in tape and reel format. To order 16-pin optocou-
pler with Option 7 on tape and reel, add a suffix "T"
after the option, i.e., ILQ-X007T.
The tape is 32 mm and is wound on a 33 cm reel.
There are 750 parts per reel. Taped and reeled 16-pin
optocouplers conform to EIA-481.
Tape and Reel Packaging for DIP-16, SMD Optocouplers with Option 9
Selected 16-pin optocouplers with Option 9 are avail-
able in tape and reel format. To order 16-pin optocou-
pler with Option 9 on tape and reel, add a suffix "T"
after the option, i.e., ILQ1-X009T.
The tape is 32 mm and is wound on a 33 cm reel.
There are 750 parts per reel. Taped and reeled 16-pin
optocouplers conform to EIA-481.
Embossment
Direction of Feed
Center Lines
of Cavity
10 Pitch Cumulative
Tolerance on Tape
±0.2 (0.008)
1.5 (.059)min.
2.0 (.079)
1.75±0.1
(.069±.004)
Pin 1 and Top
of Component
Top
Cover
Tape
25.5 (1.004)
4.72(.186)
0.35 (.014) max.
0.1 (.004) max.
32 (1.260)
18010
4±0.1 (1.57±.004)
2±0.05 (.079±.002)
10.41 (.410)
20.29 (.799)
16.0 (.630)
14.2±.05
(.559±.002)
Embossment
Direction of Feed
Center Lines
of Cavity
10 Pitch Cumulative
Tolerance on Tape
±0.2 (0.008)
1.5 (.059)min.
2.0 (.079)
1.75±0.1
(.069±.004)
Pin 1 and Top
of Component
Top
Cover
Tape
25.5 (1.004)
4.30(.169)
0.35 (.014)
0.1 (.004) max.
32 (1.260)
18011
4±0.1 (1.57±.004)
2±0.05 (.079±.002)
10.19 (.401)
20.24 (.797)
16.0 (.630)
14.2±.05
(.559±.002)
Document Number: 83714
Rev. 1.7, 11-Oct-05
Vishay Semiconductors
www.vishay.com
9
Tape and Reel Packaging for SOP-8 Optocouplers
Selected 8-pin 2 mm optocouplers are available in
tape and reel format. To order 8-pin 2 mm optocou-
pler on tape and reel, add a suffix "T" after the part
number.
The tape is 16 mm and is wound on a 33 cm reel.
There are 2000 parts per reel. Taped and reeled 8-pin
2mm optocouplers conform to EIA-481.
Tape and Reel Packaging for SOT223/10 Mini-couplers
Selected 10-pin mini-couplers are available in tape
and reel format. To order surface mount optocoupler
on tape and reel, add a suffix "T" after the part num-
ber.
The tape is 16 mm and is wound on a 33 cm reel.
There are 2000 parts per reel. Taped and reeled 10-
pin mini-couplers conform to EIA-481.
Embossment
Direction of Feed
Center Lines
of Cavity
10 Pitch Cumulative
Tolerance on Tape
±0.2 (0.008)
1.5 (.059)min.
1.5 (.059)
1.75±0.1
(.069±.004)
Pin 1 and Top
of Component
Top
Cover
Tape
13.3 (.523)
2.77 (.109)
0.35 (.014)
0.1 (.004) max.
16.0±.3
(.630±.012)
18012
4±0.1 (1.57±.004)
2±0.05 (.079±.002)
9.04 (.356)
6.05 (.238)
12.0 (.472)
7.5±.05
(.295±.002)
Embossment
Direction of Feed
Center Lines
of Cavity
10 Pitch Cumulative
Tolerance on Tape
±0.2 (0.008)
1.5 (.059)min.
1.5 (.059)
1.75±0.1
(.069±.004)
Pin 1 and Top
of Component
Top
Cover
Tape
13.3 (.523)
2.0(.079)
0.3 (.012) max.
0.1 (.004) max.
16.0±.3
(.630±.012)
18013
4±0.1 (1.57±.004)
2±0.05 (.079±.002)
7.29 (.287)
6.76 (.266)
12.0 (.472)
7.5±.05
(.295±.002)
www.vishay.com
10
Document Number: 83714
Rev. 1.7, 11-Oct-05
Vishay Semiconductors
Tape and Reel Packaging for TCMT4100
Tape and Reel Packaging for TCMT4600T0
18427
18428
18427_1
Document Number: 83714
Rev. 1.7, 11-Oct-05
Vishay Semiconductors
www.vishay.com
11
Tape and Reel Packaging for TCMT11xx Series
Tape and Reel Packaging for TCLT11xx Series
18428
18429
www.vishay.com
12
Document Number: 83714
Rev. 1.7, 11-Oct-05
Vishay Semiconductors
Tape and Reel Packaging for TCLT1600
Tape and Reel Packaging 4-pin Miniflat for SFH690ABT/ AT/ BT/ CCT
18430
0.76 (0.030) R
TYP. 4.30
0.318 +0.3
- 0.1
(0.0125 ± .0012)
2.36 ± 0.1
(0.093 ± .004)
2.66 ± 0.1
(0.105 ±.004)
7.33 ± 0.1
(0.289 ± .004)
8.00 ± 0.1
(0.315 ± .004) 4.72 ± 0.1
(0.186 ± .004)
1.50 + 0.25
(0.059 + 0.10)
12.00 + 0.3
- 0.1
(0.472 )
+ 0.012
- 0.004
5.50 ± 0.05
(0.216 ± .002)
1.75 ± 0.1
(0.069 ± .0049
1.50 + 0.1
(0.059 + .004)
4.00 ± 0.1
(0.157 ± .004)
2.00 ± 0.05
(0.079 ± .002)
18956
1
2
34
Document Number: 83714
Rev. 1.7, 11-Oct-05
Vishay Semiconductors
www.vishay.com
13
Tape and Reel Packaging 4-pin Miniflat, 180° rotation
Selected 4-pin miniflats are available in tape and reel
format with the part rotated by 180°. To order this ver-
sion, the tape and reel suffix "T" is augmented by the
numerial "3" eg. SFH690BT3. The tape is 16 mm and
is wound on a 33 cm reel. There are 2000 parts per
reel.
8°
0.76 (0.030) R
TYP. 4.30
0.318+0.3
- 0.1
(0.0125 ± .0012)
2.36 ± 0.1
(0.093 ± .004)
2.66 ± 0.1
(0.105 ±.004)
7.33±0.1
(0.289 ± .004)
8.00 ± 0.1
(0.315 ± .004) 4.72±0.1
(0.186 ± .004)
1.50+0.25
(0.059 + 0.10)
12.00 +0.3
-0.1
(0.472 )
+0.012
-0.004
5.50±0.05
(0.216 ± .002)
1.75 ± 0.1
(0.069 ± .0049
1.50+0.1
(0.059 + .004)
4.00±0.1
(0.157 ± .004)
2.00±0.05
(0.079 ± .002)
18956_1
3
4
12