Noise Suppression Products/EMI Suppression Filters > Block Type EMIFILr LC Combined Type Data Sheet 1 Block Type EMIFILr LC Combined Type BNX00* Series Dimensions Dimensions BNX002/BNX003 13 max. 13.5 max. 0.8 0.1 o1.0 PSG: Power supply ground CG: Load circuit ground CB: Load circuit + Bias 2.50.2 2.50.2 PSG: Power supply ground CG: Load circuit ground CB: Load circuit + Bias CB CG CG PSG o1.0 0.6 0.1 2.50.2 7.50.2 CB o1.0 2.50.2 2.50.2 CG 5.00.5 3.51.0 o0.8 0.6 0.1 o0.8 2.50.2 7.50.2 11.00.5 18 max. 5.00.5 3.51.0 0.8 0.1 o0.8 BNX005 12.00.5 11.00.5 18.5 max. 12.00.5 CG (in mm) B PSG Insertion Loss Characteristics (in mm) B Equivalent Circuit (50 - 50) 0 BNX003-01 20 Insertion Loss (dB) L1 (1) BNX002-01 40 L3 C2 B (BNX005-01) L2 CB (2) C1 CG (4) (3) PSG 60 (1)-(4): Terminal Number PSG: Power Supply Ground CG: Circuit Ground CB: Circuit+B 80 100 0.001 0.01 0.1 1 10 100 1000 Frequency (MHz) Packaging Code Packaging Minimum Quantity - Box 100 Rated Value Part Number Rated Voltage Withstand Voltage Rated Current Insulation Resistance(min.) Insertion Loss BNX002-01 50Vdc 125Vdc 10A 100M ohm 1MHz to 1GHz:40dB min. (20 to 25 degrees C line impedance=50 ohm) BNX003-01 150Vdc 375Vdc 10A 100M ohm 5MHz to 1GHz:40dB min. (20 to 25 degrees C line impedance=50 ohm) BNX005-01 50Vdc 125Vdc 15A 100M ohm 1MHz to 1GHz:40dB min. (20 to 25 degrees C line impedance=50 ohm) Operating Temperature Range: -30C to 85C Continued on the following page. o This data sheet is applied for Block Type EMIFILr used for General Electronics equipment for your design. ! Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2009.1.8 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > Block Type EMIFILr LC Combined Type Data Sheet 2 Continued from the preceding page. !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. o This data sheet is applied for Block Type EMIFILr used for General Electronics equipment for your design. ! Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2009.1.8 http://www.murata.com/