http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
1
o This data sheet is applied for Block Type EMIFILr used for General Electronics equipment for your design.
2009.1.8
Noise Suppression Products/EMI Suppression Filters > Block Type EMIFILr LC Combined Type
ø0.8
3.5±1.0
7.5±0.2 2.5±0.2
12.0±0.5
13 max.
5.0±0.5
18 max.
0.8
±0.1
11.0±0.5
ø0.8 ø0.8
0.6
±0.1
2.5±0.2 2.5±0.2
(in mm)
PSG: Power supply ground
CG: Load circuit ground
CB: Load circuit + Bias
CG
CB
CG
B
PSG (in mm)
ø1.0
3.5±1.0
7.5±0.2 2.5±0.2
12.0±0.5
13.5 max.
5.0±0.5 18.5 max.
0.8
±0.1
11.0±0.5
ø1.0 ø1.0
0.6
±0.1
2.5±0.2 2.5±0.2
PSG: Power supply ground
CG: Load circuit ground
CB: Load circuit + Bias
CG
CB
CG
B
PSG
0
0.001 0.01 0.1 1 10 100 1000
BNX002-01
(BNX005-01)
BNX003-01
100
80
60
40
20
Insertion Loss (dB)
Frequency (MHz)
(50Ω - 50Ω)
L2
C2
L1 L3
C1
B
PSG
CB
CG
(1)-(4): Terminal Number
PSG: Power Supply Ground
CG: Circuit Ground
CB: Circuit+B
(1) (2)
(3) (4)
Block Type EMIFILr LC Combined Type
BNX00* Series
■ Dimensions
BNX002/BNX003
■ Dimensions
BNX005
■ Insertion Loss Characteristics ■ Equivalent Circuit
■ Packaging
Code Packaging Minimum Quantity
-Box 100
■ Rated Value
Part Number Rated Voltage Withstand Voltage Rated Current Insulation Resistance(min.) Insertion Loss
BNX002-01
50Vdc 125Vdc 10A 100M ohm 1MHz to 1GHz:40dB min. (20 to 25 degrees C line impedance=50 ohm)
BNX003-01
150Vdc 375Vdc 10A 100M ohm 5MHz to 1GHz:40dB min. (20 to 25 degrees C line impedance=50 ohm)
BNX005-01
50Vdc 125Vdc 15A 100M ohm 1MHz to 1GHz:40dB min. (20 to 25 degrees C line impedance=50 ohm)
Operating Temperature Range: -30°C to 85°C
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2
o This data sheet is applied for Block Type EMIFILr used for General Electronics equipment for your design.
2009.1.8
Noise Suppression Products/EMI Suppression Filters > Block Type EMIFILr LC Combined Type
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
■ !Caution (Rating)