CCF50 Vishay Dale Metal Film Resistors, Industrial, 1 % and 5 % Tolerance FEATURES * 0.33 W power rating * 100 ppm/C standard, 50 ppm/C available upon request * Superior electrical performance * Flame retardant epoxy conformal coating * Standard 4 or 5 band color code marking for ease of identification after mounting * Tape and reel packaging for automatic insertion (52.4 mm inside tape spacing per EIA-296-E) * Compliant to RoHS directive 2002/95/EC STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL HISTORICAL MODEL POWER RATING P70 C W MAXIMUM WORKING VOLTAGE (2) V TEMPERATURE COEFF. (1) ppm/C TOLERANCE % RESISTANCE RANGE E-SERIES CCF-50 0.33 200 100 1, 5 10 to 1M 96 for 1 % 24 for 5 % CCF50 Notes (1) 50 ppm/C on request (2) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. TECHNICAL SPECIFICATIONS PARAMETER Rated Dissipation at 70 C UNIT CCF50 W 0.33 Maximum Working Voltage V 200 Insulation Voltage (1 Min) Veff > 500 Dielectric Strength VAC 450 Insulation Resistance 1011 Operating Temperature Range C - 65 to + 165 Weight g 0.11 max. GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CCF50301RFKR36 (preferred part numbering format) C GLOBAL MODEL C F 5 0 RESISTANCE VALUE CCF50 R= K = k M = M 10R0 = 10 680K = 680 k 1M00 = 1.0 M 3 0 1 TOLERANCE CODE F=1% J=5% R F K R 3 TEMPERATURE COEFFICIENT H = 50 ppm K = 100 ppm 6 PACKAGING SPECIAL E36 = Lead (Pb)-free, T/R (5000 pieces) Blank = Standard (Dash Number) (up to 3 digits) From 1 to 999 as applicable R36 = Tin/Lead, T/R (5000 pieces) Historical Part Number example: CCF-503010F (will continue to be accepted) CCF-50 3010 F R36 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 14 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31014 Revision: 11-Mar-10 CCF50 Metal Film Resistors, Industrial, 1 % and 5 % Tolerance Vishay Dale DIMENSIONS in inches (millimeters) E A C (Max.) DIMENSION D B INCHES MILLIMETERS A 0.133 0.010 (3.3 0.025) B 0.062 0.004 (1.57 0.10) (3.63) 0.020 0.002 (0.51 0.05) E 1.125 0.040 (28.58 1.02) HEAT RISE (C ABOVE AMBIENT) 0.143 D RATED POWER IN % C (Max.) 120 100 80 60 40 20 0 - 65 - 50 25 0 25 DERATING 50 70 75 100 125 150 165 175 200 AMBIENT TEMPERATURE IN C 120 100 80 60 40 20 0 0 0.125 0.25 0.375 0.5 0.625 THERMAL RESISTANCE 0.75 0.875 1 1.125 APPLIED POWER IN W MARKING - 5 band colorband for 1 % - 4 band colorband for 5 % PERFORMANCE TEST (1) MAXIMUM R (TYPICAL TEST LOTS) Thermal Shock 0.1 % Short Time Overload 0.1 % Low Temperature Operation 0.1 % Moisture Resistance 0.2 % Resistance to Soldering Heat 0.05 % Shock 0.1 % Vibration 0.05 % Life 0.5 % Terminal Strength 0.1 % Dielectric Withstanding Voltage 0.05 % Note (1) Tests per MIL-R-10509 Document Number: 31014 Revision: 11-Mar-10 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 15 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000