Data sheet
Creation date December 19, 2018 10:53:41 PM CET
Catalogue status 07.12.2018 / We reserve the right to make technical changes. 1
TERMSERIES
RCL314024
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Similar to illustration
General ordering data
Type RCL314024
Order No. 8693260000
Version TERMSERIES, Relay, No. of contacts: 1 CO contact
AgNi 90/10, Rated control voltage: 24 V DC,
Continuous current: 16 A, Plug-in connection
GTIN (EAN) 4032248364718
Qty. 20 pc(s).
TERMSERIES accessories include:
Spare relay
Base
Partition plates
Cross-connections
Power-feed modules
Data sheet
TERMSERIES
RCL314024
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date December 19, 2018 10:53:41 PM CET
Catalogue status 07.12.2018 / We reserve the right to make technical changes. 2
Dimensions and weights
Width 12.7 mm Width (inches) 0.5 inch
Height 29 mm Height (inches) 1.142 inch
Depth 15.7 mm Depth (inches) 0.618 inch
Net weight 13.62 g
Temperatures
Humidity 40 °C / 93 % rel. humidity,
no condensation
Operating temperature, max.
70 °C
Operating temperature, min. -40 °C Storage temperature, max. 85 °C
Storage temperature, min. -40 °C Operating temperature -40 °C...70 °C
Storage temperature -40 °C...85 °C
Environmental Product Compliance
REACH SVHC Lead 7439-92-1
Input
Rated control voltage 24 V DC Rated current DC 16.7 mA
Power rating 400 mW Pull-in/drop-out voltage, typ. 16.8 V / 2.4 V DC
Coil resistance 1440 Ω ± 10 %
Output
Rated switching voltage 250 V AC Max. switching voltage, AC 400 V
Continuous current 16 A Inrush current 30 A / 4 s
AC switching capacity (resistive), max. 4000 VA DC switching capacity (resistive), max. 384 W @ 24 V
Switch-on delay ≤ 8 ms Switch-off delay ≤ 6 ms
Min. switching power 1 mA @ 24 V, 10 mA @ 12
V, 100 mA @ 5 V
Max. switching frequency at rated load
0.1 Hz
Contact data
Contact type
1 CO contact (AgNi
90/10)
Mechanical service life AC coil 10 x 106 Switch.
cycles, DC coil 30 x 106
Switch. cycles
General data
Test button No Mechanical switch position indicator No
Colour Transparent UL 94 flammability rating V-2
Insulation coordination
Rated voltage 400 V Surge voltage category III
Pollution severity 2 Insulating material group IIIa
Protection degree IP20 Dielectric strength input – output 5 kVeff / 1min
Creepage and clearance distance input –
output ≥ 10 mm
Dielectric strength of open contact
1 kVeff / 1 min
Further details of approvals / standards
Standards IEC 61810-1, UL508 Certificate No. (CSA) 249409-2426937
Certificate No. (cURus) E224238
Data sheet
TERMSERIES
RCL314024
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date December 19, 2018 10:53:41 PM CET
Catalogue status 07.12.2018 / We reserve the right to make technical changes. 3
Connection data
Wire connection method Plug-in connection Pitch in mm (P) 5 mm
Classifications
ETIM 3.0 EC001437 ETIM 4.0 EC001437
ETIM 5.0 EC001437 ETIM 6.0 EC001437
UNSPSC 30-21-19-17 eClass 5.1 27-37-16-01
eClass 6.2 27-37-16-01 eClass 7.1 27-37-16-01
eClass 8.1 27-37-16-01 eClass 9.0 27-37-16-01
eClass 9.1 27-37-16-01
Approvals
Approvals
ROHS Conform
Downloads
Engineering Data EPLAN, WSCAD
Engineering Data STEP
Data sheet
TERMSERIES
RCL314024
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Drawings
Creation date December 19, 2018 10:53:41 PM CET
Catalogue status 07.12.2018 / We reserve the right to make technical changes. 4
Wiring diagram
View of Pins from below
Graph
DC load limit curve
Resistive load
Graph
DC operational voltage range
Graph
Electrical service life
Dimensional drawing
Data sheet
TERMSERIES
RCL314024
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Drawings
Creation date December 19, 2018 10:53:41 PM CET
Catalogue status 07.12.2018 / We reserve the right to make technical changes. 5
Miscellaneous
Type codes