Libertyville, IL (847) 680-7400
Inductive filtering in a direct retrofit to standard
unfiltered RJ11, RJ45, or handset jacks. Offered
with standard ferrite sleeve inductors or higher
performance ferrite blocks, the L series is available
with or without a shield.
Ganged version of our L series filtered jacks.
Available in RJ11 models with block inductors in
gangs of 2, 4, or 6. Retrofits existing unfiltered
ganged jack footprints.
Typical Impedance in Ohms
Contacts
Material:Phosphor bronze
Plating:50 microinches gold
Barrier underplating:100 microinches nickel
Resistance:
Initial:20 milliohms maximum
After durability testing
(500 mating cycles):30 milliohms maximum
Ferrites
Type:High resistivity, nickel zinc ceramic
Sleeves:Single-aperature cylinders
Block:Multi-aperature rectangular prism
Shield Material
Solder-plated copper alloy
Housing Material
Glass-filled polyester (UL94V-O)
Dielectric Withstanding Voltage
Line-to-line and line-to-ground1000 VAC for
60 seconds
Printed Circuit Board Retention
Before soldering:1 lb. minimum
After soldering:20 lb. minimum
Specifications
L Series
UL Recognized
CSA Certified
Ordering Information
Consult your local Corcom sales representative for pricing.
L Series Ganged Version
Available Part Numbers
RJ11-2L-BRJ45-6L-S2RJ11-6L-B
RJ11-2L-SRJ45-6L-B4RJ11-6L-B
RJ11-2L2-BRJ45-6L1-S6RJ11-6L-B
RJ11-4L-BRJ45-6L1-B
RJ11-4L-SRJ45-6L2-S
RJ11-4L1-SRJ45-6L2-B
RJ11-4L1-BRJ45-8L-S
RJ11-4L2-SRJ45-8L-B
RJ11-4L2-BRJ45-8L1-S
RJ11-6L-BRJ45-8L1-B
RJ11-6L-SRJ45-8L2-S
RJ11-6L1-SRJ45-8L2-B
RJ11-6L1-B
RJ11-6L2-S
RJ11-6L2-B