G6S Surface-mounting Relay Surface-mounting, double-pole signal switching Relay, with terminals jutting out from both sides of the case * Long terminals for ideal for soldering and mounting reliability. (Surface mounting terminal models) * Space-saving inside-L terminal. (Surface mounting terminal models) * Unique terminal construction allowing the terminal temperature to rise easily, ideal for soldering reliability. (Surface mounting terminal models) * High dielectric strength (2,000 VAC) and impulse withstand voltage between coil and contacts (2,500 V, 2 x 10 s: Telcordia requirements). * High sensitivity with 140 mW rated power consumption. * Ultra-miniature at 9.4 mm (H) x 7.5 mm (W) x 15 mm (L). * Applicable to IRS using heat-resistant material. * Standard model conforms to UL/CSA standards. * Model with PCB terminals (G6S@-2) is added to this series. * EN60950 certified type is available. (-Y type) G 6 S RoHS Compliant Model Number Legend Application Examples G6 S @ - @ @ - @ 1 2 3 * * * * 4 3. Terminal Shape None : PCB terminals F : Outside-L surface mounting terminals G : Inside-L surface mounting terminals 4. Approved Standards None : UL/CSA Y : EN60950 certified 1. Relay Function None : Single-side stable U : Single-winding latching K : Double-winding latching 2. Number of poles/ Contact form 2: 2-pole/DPDT (2c) Telecommunication equipment Measurement devices Office automation machines Audio-visual products. Ordering Information Surface mounting terminal standard models (UL, CSA certified) Relay Function Enclosure rating Fully sealed Contact form DPDT (2c) Single-side stable Model Single-winding latching Rated coil voltage G6S-2F G6S-2G Model Rated coil voltage Double-winding latching Model Rated coil voltage 3 VDC 3 VDC 3 VDC 4.5 VDC 4.5 VDC 4.5 VDC 5 VDC G6SU-2F G6SU-2G 5 VDC G6SK-2F G6SK-2G 5 VDC 12 VDC 12 VDC 12 VDC 24 VDC 24 VDC 24 VDC Minimum packing unit Minimum ordering unit (tape packing) 50 pcs/tube (400 pcs/reel) 800 pcs/ 2 reels Surface mounting terminal standard models (EN60950 certified) Relay Function Enclosure rating Contact form Fully sealed DPDT (2c) Single-side stable Model Rated coil voltage G6S-2F-Y G6S-2G-Y 12 VDC Minimum packing unit Minimum ordering unit (tape packing) 50 pcs/tube (400 pcs/reel) 800 pcs/ 2 reels 5 VDC 24 VDC Note 1. When ordering, add the rated coil voltage to the model number. Example: G6S-2F 3 VDC Rated coil voltage Note 2.When ordering tape packing, add -TR" to the model number. Be sure since -TR" is not part of the relay model number, it is not marked on the relay case. 1 G6S Surface-mounting Relay PCB Terminal Standard Models (UL, CSA certified) Relay Function Enclosure rating Contact form Fully sealed DPDT (2c) Single-side stable Model G6S-2 Single-winding latching Rated coil voltage Model Rated coil voltage Double-winding latching Model Rated coil voltage 3 VDC 3 VDC 3 VDC 4.5 VDC 4.5 VDC 4.5 VDC 5 VDC G6SU-2 5 VDC G6SK-2 5 VDC 12 VDC 12 VDC 12 VDC 24 VDC 24 VDC 24 VDC Minimum packing unit 50 pcs/tube PCB Terminal Standard Models (EN60950 certified) Relay Function Enclosure rating Contact form Single-side stable Model Rated coil voltage G6S-2-Y 12 VDC Minimum packing unit 5 VDC Fully sealed DPDT (2c) 50 pcs/tube 24 VDC Note: When ordering, add the rated coil voltage to the model number. Example: G6S-2 3 VDC Rated coil voltage Ratings Single-side Stable Model (G6S-2, G6S-2F, G6S-2G) Item Rated voltage G 6 S Rated current (mA) 3 VDC 46.7 4.5 VDC 31.0 Coil resistance () Contacts Must operate Must release Max. voltage Power voltage (V) voltage (V) (V) consumption (mW) % of rated voltage 145 5 VDC 28.1 178 11.7 1,028 24 VDC 8.3 2,880 75% max. 10% min. 200% (at 23C) 170% (at 23C) Approx. 200 Single-winding Latching Model (G6SU-2, G6SU-2F, G6SU-2G) Rated voltage Coil resistance () 3 VDC 33.3 90 4.5 VDC 22.2 203 20 250 5 VDC 12 VDC 8.3 1,440 24 VDC 6.3 1,152 Must set voltage (V) Must reset voltage (V) Max. voltage Power (V) consumption (mW) % of rated voltage 75% max. 75% max. 180% (at 23C) Approx. 100 Approx. 150 Note 1. The rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of 10%. 2. Operating characteristics are measured at a coil temperature of 23C. 3. The maximum voltage is the highest voltage that can be imposed on the relay coil. Double-winding Latching Model (G6SK-2, G6SK-2F, G6SK-2G) Item Rated voltage Rated current (mA) Coil resistance () 3 VDC 66.6 45 4.5 VDC 44.4 101 40 125 12 VDC 16.7 720 24 VDC 12.5 1,920 5 VDC Must set voltage (V) Must reset voltage (V) Max. voltage Power (V) consumption (mW) % of rated voltage 75% max. 75% max. 170% (at 23C) Approx. 200 140% (at 23C) Approx. 300 Note 1. The rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of 10%. 2. Operating characteristics are measured at a coil temperature of 23C. 3. The maximum voltage is the highest voltage that can be imposed on the relay coil. EN60950 certified Model (G6S-2F-Y, G6S-2G-Y, G6S-2-Y) Item Rated voltage 5 VDC Rated current (mA) Coil resistance () 40 125 12 VDC 16.7 720 24 VDC 9.6 2,504 Must operate Must release Max. voltage Power voltage (V) voltage (V) (V) consumption (mW) % of rated voltage 75% max. 10% min. 170% (at 23C) Approx. 200 Approx. 230 Note 1. The rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of 10%. 2. Operating characteristics are measured at a coil temperature of 23C. 3. The maximum voltage is the highest voltage that can be imposed on the relay coil. 2 Resistive load Bifurcated crossbar Contact material Ag (Au-Alloy) Rated load 0.5 A at 125 VAC; 2 A at 30 VDC Rated carry current 2A Max. switching voltage 250 VAC, 220 VDC Max. switching current 2A Approx. 140 Note 1. The rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of 10%. 2. Operating characteristics are measured at a coil temperature of 23C. 3. The maximum voltage is the highest voltage that can be imposed on the relay coil. Rated current (mA) Load Contact type 64.3 12 VDC Item Item G6S Surface-mounting Relay Characteristics Item Relay Function Single-side Stable G6S-2, G6S-2F, G6S-2G Single-winding Latching Double-winding Latching G6SU-2, G6SU-2F, G6SK-2, G6SK-2F, G6SU-2G G6SK-2G 75 m max. 4 ms max. 4 ms max. - 10 ms 1,000 M min. (at 500 VDC) 1,000 VAC, 50/60 Hz for 1 2,000 VAC, 50/60 Hz for 1 min min 1,500 VAC, 50/60 Hz for 1 min 1,500 VAC, 50/60 Hz for 1 min 500 VAC, 50/60 Hz for 1 - min Contact resistance *1 Operate (set) time Release (reset) time Min. set/reset pulse width Insulation resistance *2 Between coil and contacts Between contacts of different polarity Between contacts of the same polarity Dielectric strength Between set and reset coil 2,500 V (2 x 10 s); 1,500 V (10 x 160 s) Between coil and contacts Impulse withstand voltage Vibration resistance Shock resistance Durability EN60950 certified G6S-2F-Y, G6S-2G-Y, G6S-2-Y - 2,000 VAC, 50/60 Hz for 1 min - 2,500 V (2 x 10 s); 1,500 V (10 x 160 s) 1,500 V (10 x 160 s) 2,500 V (2 x 10 s); 1,500 V (10 x 160 s) 1,500 V (10 x 160 s) 10 to 55 to 10 Hz, 2.5 mm single amplitude (5 mm double amplitude) 10 to 55 to 10 Hz, 1.65 mm single amplitude (3.3 mm double amplitude) 1,000 m/s2 750 m/s2 100,000,000 operations min. (at 36,000 operations/hr) 100,000 operations min. for AC (at 1,800 operations/h with rated load) 100,000 operations min. for DC (at 1,200 operations/h with rated load) 10 A at 10 m VDC -40C to 85C (with no icing or condensation), and -40C to 70C (with no icing or condensation) only for double-winding latching 24 VDC type and EN60950 standard approved 24 VDC type 5% to 85% Approx. 2 g Between contacts of different polarity Between contacts of the same polarity Destruction Malfunction Destruction Malfunction Mechanical Electrical Failure rate (P level) (reference value) *3 Ambient operating temperature Ambient operating humidity Weight G 6 S Note: The above values are initial values. *1. The contact resistance was measured with 10 mA at 1 VDC with a voltage drop method. *2. The insulation resistance was measured with a 500 VDC megohmmeter applied to the same parts as those used for checking the dielectric strength (except between the set and reset coil). *3. This value was measured at a switching frequency of 120 operations/min. This value may vary, depending on switching frequency, operating conditions, expected reliability level of the relay, etc. It is always recommended to double-check relay suitability under actual load conditions. Engineering Data 7 5 3 AC resistive load 1 500 Maximum voltage (%) 10 300 30 VDC resistive load Ambient temperature 23C Switching frequency: 1,200 operations/h 100 50 0.3 0.1 10 30 1 0 300 500 700 1,000 150 250 G6SU 200 150 G6SK 12 VDC max. 5 125 VAC resistive load Ambient temperature 23C 3 Switching frequency: 1,800 operations/h 50 70 100 200 G6S 24 VDC G6S-Y G6S-Y 12 VDC max. 24 VDC 100 10 DC resistive load G6S 4.5 to 12 VDC 30 0.7 0.5 250 Ambient Temperature vs. Maximum Voltage (Latching) Maximum voltage (%) Ambient Temperature vs. Maximum Voltage (Single-side Stable) Durability G6S-2F(G) Durability (x104 operations) Switching current (A) Maximum Switching Capacity 0.5 1 1.5 Switching voltage (V) 2 50 50 2.5 0 -40 3 G6SK 24 VDC 100 -20 0 20 40 60 80 0 -40 100 -20 0 20 40 60 80 100 Ambient temperature (C) Ambient temperature (C) Switching current (A) Note: "Maximum voltage" is the maximum voltage that can be applied to the Relay coil. G6S 12 VDC max. 3 G6SU 12 VDC max. 2 G6SU 24 VDC G6SK 12 VDC max. G6S-Y 24 VDC 1 100 Y 1,000 X min. 40 50 60 70 90 100 Ambient temperature (C) 0 40 50 60 80 90 100 Ambient temperature (C) De400 energized Z 1,000 200 200 40 20 70 600 X 1,000 60 Must operate voltage Must release voltage 80 Energized 800 max. 80 max. X min. G6SK 24 VDC Shock Malfunction G6S-2F(G) Sample: G6S-2F Number of Relays: 10 pcs 1 G6S 24 VDC G6S-Y 12 VDC max. 0 On the basis of rated voltage (%) 3 2 Ambient Temperature vs. Must Operate or Must Release Voltage G6S-2F(G) Ambient Temperature vs. Switching Current (Latching) Switching current (A) Switching current (A) Ambient Temperature vs. Switching Current (Single-side Stable) 0 -60 -40 -20 0 20 40 60 80 100 120 Ambient temperature (C) 1,000 Z' Shock direction X X' Y Z Z' 400 1,000 X' 600 800 1,000 Y' Unit: m/s2 Sample: G6S-2F Number of Relays: 10 pcs Y' Conditions: Shock is applied in X, Y, and Z directions three times each with and without energizing the Relays to check the number of contact malfunctions. 3 G6S Surface-mounting Relay min. Must operate voltage 500 300 Sample: G6S-2F Number of Relays: 10 pcs Measurement conditions: NO contact - wire-spring relay load at 48 VDC, 120mA (with ARC-killer) NC contact - resistive load at 48 VDC, 60mA Switching frequency: 3,600 operations/h 100 40 Must release voltage 20 max. 50 min. 30 Contact resistance Electrical Endurance (Contact Resistance) *1 G6S-2F(G) Contact resistance (m) max. 60 1,000 On the basis of rated voltage (%) 100 Sample: G6S-2F Number of Relays: 10 pcs Measurement conditions: NO contact - wire-spring relay load at 48 VDC, 120mA (with ARC-killer) 80 NC contact - resistive load at 48 VDC, 60mA Switching frequency: 3,600 operations/h Electrical Endurance (with Must Operate and Must Release Voltage) *1 G6S-2F(G) Electrical Endurance (Contact Resistance) *1 G6S-2F(G) Contact resistance (m) On the basis of rated voltage (%) Electrical Endurance (with Must Operate and Must Release Voltage) *1 G6S-2F(G) 1,000 100 Sample: G6S-2F Number of Relays: 10 pcs Test conditions: 2A resistive load at 30-VDC with an operation rate of 50% 80 Switching frequency: 1,200 operations/h max. 60 min. Must operate voltage Sample: G6S-2F Number of Relays: 10 pcs Test conditions: 2A resistive load at 30-VDC with an operation rate of 50% 300 Switching frequency: 1,200 operations/h NO contact NC contact 500 100 40 Contact resistance 50 max. min. max. min. max. max. min. min. max. 20 Must release voltage 30 min. NO contact NC contact 10 50 0 100 300 500 1,000 5,000 100 300 500 1,000 Contact resistance (m) Contact Reliability Test (Contact Resistance) *1, *2 G6S-2F(G) 3 5 10 30 50 100 10 1 300 500 Number of contacts NO contact NC contact 3 5 10 60 Sample: G6S-2F Number of Relays: 50 pcs Must operate time Must release time 40 30 50 100 300 500 Operating frequency (x103 operations) Operating frequency (x103 operations) Must Operate and Must Release Time Distribution *1 G6S-2F(G) 1,000 Sample: G6S-2F Number of Relays: 10 pcs 500 Test conditions: 10 A resistive load at 10 m VDC with an operation rate of 50% 300 Switching frequency: 7,200 operations/h 0 1 5,000 Operating frequency (x103 operations) Operating frequency (x103 operations) Distribution of Bounce Time *1 G6S-2F(G) Number of contacts 50 60 Sample: G6S-2F Number of Relays: 50 pcs Operating bounce time Release bounce time 40 100 max. max. 20 min. min. 30 10 10 30 50 100 300 500 1,000 20 0.5 0 10,000 50,000 1 1.5 2 2.5 Operating frequency (x103 operations) External Magnetic Interference (Average value) G6S-2F(G) Energized +10 0 -20 -30 Change rate on the basis of initial value (%) Sample Energized *1. *2. *3. 4 Change rate on the basis of initial value (%) Not energized 1.5 2 2.5 S N S N +20 +10 +30 S N S N +20 +10 3 Time (ms) (Average value) +30 S N S N +20 +10 0 0 0 -10 -10 -10 Average value Initial stage Test +10 -20 0 -20 -30 +30 +20 -30 -1,200 Average value -800 -400 0 400 Test Sample: G6S-2F Number of Relays: 10 pcs 20 +10 0 +30 +20 -400 0 400 800 1,200 Sample: G6S-2F Number of Relays:10 pcs -30 -1,200 -800 -400 0 High-frequency Characteristics (Insertion Loss) *1, *3 G6S-2F(G) (Average value (initial)) 0 0.4 Must operate voltage Must release voltage 400 800 1,200 External magnetic field (A/m) External magnetic field (A/m) High-frequency Characteristics (Return Loss, V.SWR) *1, *3 G6S-2F(G) (Average value (initial)) 0 2.5 Sample: G6S-2F Number of Relays: 10 pcs 5 2.0 10 1.5 V.SWR 40 15 Average value 1.2 Initial stage 1.0 Test 20 60 1.6 +10 0 -10 -20 -30 -800 0.8 -10 -20 -30 -30 -1,200 External magnetic field (A/m) 0 Must operate voltage Must release voltage Sample: G6S-2F Number of Relays:10 pcs 800 1,200 High-frequency Characteristics (Isolation) *1, *2 G6S-2F(G) (Average value (initial)) Initial stage -20 -20 Must operate voltage Must release voltage Sample: G6S-2F Number of Relays:10 pcs -10 Must operate voltage Must release voltage Sample 1 -10 Mutual Magnetic Interference G6S-2F(G) 4.64 mm 0.5 (Average value) Rate of variability (%) Test 0 Return loss (dB) Sample +30 +20 Initial stage +30 Insertion loss (dB) Not energized +30 +20 Isolation (dB) Sample Change rate on the basis of initial value (%) 2.22 mm Change rate on the basis of initial value (%) Must operate voltage Must release voltage Rate of variability (%) Mutual Magnetic Interference G6S-2F(G) 3 Time (ms) 80 Average value 10 30 50 100 300 500 1,000 5,000 Frequency (MHz) 2.0 Return loss 25 Sample: G6S-2F Number of Relays: 10 pcs 10 30 50 100 300 500 1,000 5,000 Frequency (MHz) 30 10 30 50 0.5 100 300 500 1,000 5,000 0 Frequency (MHz) The tests were conducted at an ambient temperature of 23C. The contact resistance data are periodically measured reference values and are not values from each monitoring operation. Contact resistance values will vary according to the switching frequency and operating environment, so be sure to check operation under the actual operating conditions before use. High-frequency characteristics depend on the PCB to which the Relay is mounted. Always check these characteristics, including durability, in the actual machine before use. V.SWR G 6 S Rate of variability (%) 50 G6S Surface-mounting Relay Dimensions Single-side Stable G6S-2F G6S-2F-Y Mounting Dimensions (Top View) Tolerance: 0.1 mm 14.80.2 9.20.2 2.54 7.30.2 5.08 2.54 Orientation mark 2.2 0.65 Terminal Arrangement/ Internal Connections (Top View) 12 10 9 8 1 3 4 5 8 0.25 +0.5 9.2-0.3 0.5 2.54 5.08 2.54 Note 1. Each value has a tolerance of 0.3 mm. Note 2.The coplanarity of the terminals is 0.1 mm max. G6S-2G G6S-2G-Y 1 Mounting Dimensions (Top View) Tolerance: 0.1 mm 14.80.2 7.30.2 Orientation mark 2.54 5.08 9.20.2 2.54 0.65 2.2 0.25 +0.3 4.9-0.5 2.54 2.54 10 9 8 1 3 4 5 1 Note 1. Each value has a tolerance of 0.3 mm. Note 2.The coplanarity of the terminals is 0.1 mm max. G6S-2 G6S-2-Y PCB Mounting Holes (Bottom View) 2.54 14.80.2 G 6 S Terminal Arrangement/ Internal Connections (Bottom View) Eight, 1-dia. holes 7.30.2 Orientation mark 2.54 9.20.2 12 6.1 0.5 5.08 Terminal Arrangement/ Internal Connections (Top View) 1 3 4 5 12 10 9 8 0.65 5.080.1 2.95 0.5 0.25 5.08 5.08 2.54 2.54 (1.11) 5.08 (1.05) Note: Each value has a tolerance of 0.3 mm. Single-winding Latching G6SU-2F 2.54 2.54 Mounting Dimensions (Top View) Tolerance: 0.1 mm 14.80.2 7.30.2 2.54 5.08 Terminal Arrangement/ Internal Connections (Top View) Orientation mark 2.54 12 9.20.2 0.65 2.2 0.25 8 2.54 2.54 1 Mounting Dimensions (Top View) Tolerance: 0.1 mm 14.80.2 7.30.2 2.54 5.08 5 2.2 0.5 9 8 3 4 5 S R 1 1 +0.3 4.9-0.5 2.54 10 6.1 0.25 Note 1. Each value has a tolerance of 0.3 mm. Note 2.The coplanarity of the terminals is 0.1 mm max. G6SU-2 PCB Mounting Holes (Bottom View) 2.54 14.80.2 Terminal Arrangement/ Internal Connections (Bottom View) Eight, 1-dia. holes 7.30.2 Orientation mark 2.54 9.20.2 4 Orientation mark 2.54 0.65 2.54 3 Terminal Arrangement/ Internal Connections (Top View) 12 5.08 8 Note 1. Each value has a tolerance of 0.3 mm. Note 2.The coplanarity of the terminals is 0.1 mm max. G6SU-2G 9.20.2 9 S R 1 +0.5 9.2-0.3 0.5 5.08 10 1 3 4 5 10 9 8 0.65 5.080.1 2.95 S R 12 0.5 0.25 5.08 2.54 2.54 (1.11) 5.08 (1.05) 5.08 2.54 2.54 Note: Each value has a tolerance of 0.3 mm. 5 G6S Surface-mounting Relay Double-winding Latching G6SK-2F Mounting Dimensions (Top View) Tolerance: 0.1 mm 14.80.2 7.30.2 2.54 2.54 Terminal Arrangement/ Internal Connections (Top View) Orientation mark 5.08 2.54 12 9.20.2 0.65 2.2 0.25 8 7 1 R 3 4 5 6 2.54 5.08 2.54 2.54 Note 1. Each value has a tolerance of 0.3 mm. Note 2.The coplanarity of the terminals is 0.1 mm max. G6SK-2G 1 Mounting Dimensions (Top View) Tolerance: 0.1 mm 14.80.2 7.30.2 Terminal Arrangement/ Internal Connections (Top View) Orientation mark 2.54 2.54 5.08 2.54 12 9.20.2 9 S 8 +0.5 9.2-0.3 0.5 10 0.65 2.2 6.1 10 9 8 7 S R 0.25 1 0.5 2.54 2.54 PCB Mounting Holes (Bottom View) 2.54 14.80.2 5 6 Terminal Arrangement/ Internal Connections (Bottom View) Ten, 1-dia. holes 7.30.2 Orientation mark 2.54 9.20.2 4 Note 1. Each value has a tolerance of 0.3 mm. Note 2.The coplanarity of the terminals is 0.1 mm max. G6SK-2 G 6 S 3 1 +0.3 4.9-0.5 2.54 5.08 1 3 4 5 6 0.65 5.080.1 S R (1.11) 2.95 12 0.5 10 9 8 7 0.25 5.08 2.54 5.08 2.54 2.54 5.08 (1.05) 2.54 2.54 2.54 Note: Each value has a tolerance of 0.3 mm. Tape Packing (Surface Mounting Terminal Models) * When ordering Relays in tape packing, add the prefix "-TR" to the model number, otherwise the Relays in tube packing will be provided. Relays per Reel: 400 pcs (3) Carrie Tape Dimensions Minimum ordering unit: 2 reels (800 pcs) G6S-2F(-Y), G6SU-2F, G6SK-2F (1) Direction of Relay Insertion 20.1 Orientation mark Top tape (cover tape) 9.70.1 40.1 1.5+0.1 -0 1.750.1 0.40.05 11.50.1 240.3 15.3 Pulling direction 160.1 Carrier tape Embossed tape 9.7 G6S-2G(-Y), G6SU-2G, G6SK-2G (2) Reel Dimensions 20.3 210.5 130.2 9.70.1 40.1 1.5+0.1 -0 25.50.5 29.51.0 20.1 1.750.1 11.50.1 240.3 80 15.3 330 160.1 R1 6 7.8 0.40.05 G6S Surface-mounting Relay Recommended Soldering Method Temperature (C) (1) IRS Method (Mounting Solder: Lead) * The thickness of cream solder to be applied should be within a range between 150 and 200 m on OMRON's recommended PCB pattern. * In order to perform correct soldering, it is recommended that the correct soldering conditions be maintained as shown below on the left side. Soldering 220 to 240 Correct Soldering 180 to 200 Incorrect Soldering Relay Terminal Preheating 150 Land Heel fillet is formed 90 to 120 PCB Solder 20 to 30 Insufficient amount of solder Time (s) (The temperature profile indicates the temperature on the circuit board surface.) Excessive amount of solder Visually check that the Relay is properly soldered. Temperature (C) (2) IRS Method (Mounting Solder: Lead-free) Uppwe surface of case (peak): 255C max. Soldering 250 max. G 6 S 230 180 Preheating 150 Relay terminal section 120 max. 30 max. Time (s) (The temperature profile indicates the temperature on the PCB.) Approved Standards UL recognized: CSA certified: Precautions (File No. E41515) (File No. LR31928) * Please refer to "PCB Relays Common Precautions" for correct use. Correct Use Contact form Coil ratings Contact ratings Number of test operations DPDT (2c) 2 to 48 VDC 3 A, 30 VDC at 40C 0.3 A, 110 VDC at 40C 0.5 A, 125 VAC at 40C 6,000 EN/IEC (File No. 8064) Contact form Isolation category Voltage DPDT (2c) Supplementary Isolation 250 VAC * Long-term Continuously ON Contacts * Using the Relay in a circuit where the Relay will be ON continuously for long periods (without switching) can lead to unstable contacts because the heat generated by the coil itself will affect the insulation, causing a film to develop on the contact surfaces. We recommend using a latching relay (magnetic-holding relay) in this kind of circuit. If a single-side stable model must be used in this kind of circuit, we recommend using a fail-safe circuit design that provides protection against contact failure or coil burnout. * Relay Handling * Use the Relay as soon as possible after opening the moistureproof package. If the Relay is left for a long time after opening the moisture-proof package, the appearance may suffer and seal failure may occur after the solder mounting process. To store the Relay after opening the moisture-proof package, place it into the original package and sealed the package with adhesive tape. * When washing the product after soldering the Relay to a PCB, use a water-based solvent or alcohol-based solvent, and keep the solvent temperature to less than 40C. Do not put the Relay in a cold cleaning bath immediately after soldering. * Claw Securing Force During Automatic Mounting * During automatic insertion of Relays, be sure to set the securing force of each claw to the following so that the Relay's characteristics will be maintained. C A B Dimension A: 1.96 N max. Dimension B: 4.90 N max. Dimension C: 1.96 N max. 7 G6S Surface-mounting Relay G 6 S * Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. * Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company 8 Contact: www.omron.com/ecb Cat. No. K093-E1-05 0812(0207)(O)