www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.012/04/13
Multilayer Ceramic Capacitors
Capacitor Arrays Series
Features:
• High density mounting due to mounting space saving.
• Mounting cost saving.
• Increased throughput.
Applications:
• For use as a bypass for digital and analog signal line noise
• Computer motherboards and peripherals.
• The other common electronic circuits.
Description:
WTC middle and high voltage series MLCC is designed by a special
internal electrode pattern, which can reduce voltage concentrations
by distributing voltage gradients throughout the entire capacitor. This
special design also affords increased capacitance values in a given
case size and voltage rating. WTC capacitor arrays are developed
to offer designers the opportunity to lower placement costs increase
assembly line output through lower component count per board.
External Dimensions:
Reow soldering process only.
Size
Inch (mm)
L
(mm)
W
(mm)
T
(mm)/Symbol S (mm) BW (mm) P (mm)
0508 (1220) 2 ±0.15 1.25 ±0.15 0.85 ±0.1 T 0.2 ±0.1 0.25 ±0.1 0.5 ±0.1
0612 (1632) 3.2 ±0.15 1.6 ±0.15 0.8 ±0.1 B 0.3 ±0.2 0.4 ±0.15 0.8 ±0.15
www.element14.com
www.farnell.com
www.newark.com
Page <2> V1.012/04/13
Multilayer Ceramic Capacitors
Capacitor Arrays Series
General Electrical Data:
Dielectric NP0 X7R
Size 4x0402 4x0603 4x0402 4x0603
Capacitance* 10pF to 270pF 10pF to 470pF 1,000pF to 100nF 180pF to 100nF
Capacitance tolerance** J (±5%), K (±10%) K (±10%), M (±20%)
Rated voltage (WVDC) 50V 25, 50V 10V, 16V, 25V, 50V 16V, 25V, 50V
Q/Tan δ* Cap<30pF: Q≥400+20C
Cap≥30pF: Q≥1000
Ur=50V, ≤2.5%
Ur=25V&16V, ≤3.5%
Ur=10V, ≤5.0%
Insulation resistance at Ur ≥10G ≥10G or RxC≥500 xF whichever is less
Operating temperature -55°C to +125°C
Capacitance characteristic ±30ppm
Termination Ni/Sn (lead-free termination)
* Measured at 30~70% related humidity.
NP0: Apply 1.0±0.2Vrms, 1.0MHz±10% at the conditions of 25°C ambient temperature.
X7R: Apply 1.0±0.2Vrms, 1.0kHz±10%, at the conditions of 25°C ambient temperature.
** Preconditioning for Class II MLCC: Perform a heat treatment at 150±10°C for 1 hour, then leave in ambient condition
for 24±2 hours before measurement.
Capacitance Range:
Size 4 x 0402 4 x 0603
Dielectric NP0 X7R NP0 X7R
Rated Voltage (VDC) 50 10 16 25 50 25 50 16 25 50
Capacitance
10pF (100) T B B
15pF (150) T B B
22pF (220) T B B
33pF (330) T B B
47pF (470) T B B
68pF (680) T B B
100pF (101) T B B
150pF (151) T B B
180pF (181) T B B B B
Size Thickness/Symbol
(mm)
Paper Tape
7” reel 13” reel
4 x 0402 0.85 ±0.1 T 4k -
4 x 0603 0.8 ±0.1 B 4k -
Packaging Dimension And Quantity:
Unit: pieces
www.element14.com
www.farnell.com
www.newark.com
Page <3> V1.012/04/13
Multilayer Ceramic Capacitors
Capacitor Arrays Series
Capacitance Range:
Size 4 x 0402 4 x 0603
Dielectric NP0 X7R NP0 X7R
Rated Voltage (VDC) 50 10 16 25 50 25 50 16 25 50
Capacitance
220pF (221) T B B B B
270pF (271) T B B B B
330pF (331) B B B B
470pF (471) B B B B
6,80pF (681) B B
1,000pF (102) T T T T B B
1,500pF (152) T T T T B B
2,200pF (222) T T T T B B
3,300pF (332) T T T T B B
4,700pF (472) T T T T B B
6,800pF (682) T T T T B B
0.010µF (103) T T T T B B
0.015µF (153) T T T B B B
0.022µF (223) T T T B B B
0.033µF (333) T T T B
0.047µF (473) T T T B
0.068µF (683) T T T B
0.10µF (104) T T T B
Reliability Test Conditions and Requirements:
No Item Test Condition Requirements
1Visual and
Mechanical -
* No remarkable defect.
* Dimensions to conform to individual
specication sheet.
2 Capacitance Class I: NP0
1 ±0.2Vrms, 1MHz ±10%
Class II: (X7R)
1 ±0.2Vrms, 1kHz ±10%
* Shall not exceed the limits given in the detailed
spec.
3Q/ D.F. (Dissi-
pation Factor)
NP0: Cap≥30pF, Q≥1000; Cap<30pF,
Q≥400+20C
X7R: Ur=50V, ≤2.5%; Ur=25V&16V, ≤3.5%;
Ur=10V, ≤5.0%
4Dielectric
Strength
* To apply voltage (≤100V) 250%.
* Duration: 1 to 5 sec.
* Charge and discharge current less than
50mA.
* No evidence of damage or ash over during
test.
5Insulation
Resistance To apply rated voltage for max. 120 sec. ≥10GΩ or RxC≥500 -F whichever is smaller.
1. The letter in cell is expressed the symbol of product thickness.
www.element14.com
www.farnell.com
www.newark.com
Page <4> V1.012/04/13
Multilayer Ceramic Capacitors
Capacitor Arrays Series
Reliability Test Conditions and Requirements:
No Item Test Condition Requirements
6Temperature
Coefcient
With no electrical load.
T.C. Operating
Temperature
NP0) 55~125°C at 25°C
X7R -55~125°C at 25°C
T.C. Capacitance Change
NP0 Within ±30ppm/°C
X7R Within ±15%
7
Adhesive
Strength of
Termination
Pressurizing force:
5N (≤0603) and 10N (>0603)
Test time: 10 ±1 sec.
No remarkable damage or removal of the
terminations.
8Vibration
Resistance
Vibration frequency: 10~55 Hz/min.
Total amplitude: 1.5mm
Test time: 6 hrs. (Two hrs each in three
mutually perpendicular directions.)
No remarkable damage.
Cap change and Q/D.F.: To meet initial spec.
9 Solderability Solder temperature: 235 ±5°C
Dipping time: 2 ±0.5 sec. 95% min. coverage of all metalized area.
10 Bending Test
The middle part of substrate shall be
pressurized by means of the pressurizing rod
at a rate of about 1mm per second until the
deection becomes 1mm and then the
pressure shall be maintained for 5 ±1 sec.
Measurement to be made after keeping at
room temp. for 24 ±2 hrs.
No remarkable damage.
Cap change
NP0: within ±5.0% or ±0.5pF whichever is larger.
X7R: within ±12.5%
(This capacitance change means the change of
capacitance under specied exure of substrate
from the capacitance measured before the test.)
11 Resistance to
Soldering Heat
Solder temperature: 260 ±5°C
Dipping time: 10 ±1 sec
Preheating: 120 to 150°C for 1 minute before
immerse the capacitor in a eutectic solder.
Before initial measurement (Class II only):
Perform 150+0/-10°C for 1 hr and then set
for 48 ±4hrs at room temp.
Measurement to be made after keeping at
room temp. for 24 ±2 hrs. (Class I)
or 48 ±4 hrs. (Class II).
No remarkable damage.
Cap change:
NP0: within ±2.5% or ±0.25pF whichever is
larger.
X7R: within ±7.5%
Q/D.F., I.R. and dielectric strength: To meet initial
requirements.
25% max. leaching on each edge.
12 Temperature
Cycle
Conduct the ve cycles according to the
temperatures and time.
Step Temp. (°C) Time (Min.)
1Min. operating temp.
+0/-3 30±3
2 Room temp. 2~3
3Max. operating temp.
+3/-0 30±3
4 Room temp. 2~3
Before initial measurement (Class II only):
Perform 150+0/-10°C for 1hour and then set
for 24±2 hrs at room temp. Measurement
to be made after keeping at room temp. for
24±2 hrs. (Class I) or 48±4 hrs. (Class II).
No remarkable damage.
Cap change:
NP0: within ±2.5% or ±0.25pF whichever is
larger.
X7R: within ±7.5%
Q/D.F., I.R. and dielectric strength: To meet initial
requirements.
www.element14.com
www.farnell.com
www.newark.com
Page <5> V1.012/04/13
Multilayer Ceramic Capacitors
Capacitor Arrays Series
Reliability Test Conditions and Requirements:
No Item Test Condition Requirements
13
Humidity
(Damp Heat)
Steady State
Test temp.: 40±2°C
Humidity: 90~95% RH
Test time: 500+24/-0hrs.
Measurement to be made after keeping at
room temp. for 24±2 hrs. (Class I)
or 48±4 hrs. (Class II).
No remarkable damage.
Cap change:
NP0: within ±5.0% or ±0.5pF whichever is larger.
X7R: within ±12.5%
Q/D.F. value:
NP0: Cap≥30pF, Q≥350; 10pF≤Cap<30pF,
Q≥275+2.5C
Cap<10pF; Q≥200+10C
X7R: Ur=50V, ≤3%; Ur=25V&16V, ≤5%;
Ur=10V, ≤7.5%
I.R.: ≥1GΩ or RxC≥50Ω-F whichever is smaller.
14
Humidity
(Damp Heat)
Load
Test temp.: 40±2°C
Humidity: 90~95%RH
Test time: 500+24/-0 hrs.
To apply voltage: rated voltage.
Measurement to be made after keeping at
room temp. for 24±2 hrs. (Class I) or 48±4
hrs. (Class II).
No remarkable damage.
Cap change:
NP0: within ±7.5% or ±0.75pF whichever is
larger.
X7R: within ±12.5%
Q/D.F. value:
NP0: Cap≥30pF, Q≥200; Cap<30pF,
Q≥100+10/3C
X7R: Ur=50V, ≤3%; Ur=25V&16V, ≤5%;
Ur=10V, ≤7.5%
I.R.: ≥500MΩor RxC≥25Ω-F whichever is smaller.
15
High
Temperature
Load
(Endurance)
Test temp.:
NP0, X7R: 125±3°C
To apply voltage: 200% of rated voltage.
Test time: 1000+24/-0 hrs.
Measurement to be made after keeping at
room temp. for 24±2 hrs. (Class I)
or 48±4 hrs. (Class II).
No remarkable damage.
Cap change:
NP0: within ±3.0% or ±0.3pF whichever is larger.
X7R: within ±12.5%
Q/D.F. value:
NP0: Cap≥30pF, Q≥350
10pF≤Cap<30pF, Q≥275+2.5C
Cap<10pF, Q≥200+10C
X7R: Ur=50V, ≤3%; Ur=25V&16V, ≤5%;
Ur=10V, ≤7.5%
I.R.: ≥1GΩ or RxC≥50Ω-F whichever is smaller.
Appendixes
Reel Dimensions
Size 4x0402, 4x0603
Reel size 7”
C13 +0.5/-0.2
W18.4 +1.5/-0
A178 ±0.1
N60 +1/-0
www.element14.com
www.farnell.com
www.newark.com
Page <6> V1.012/04/13
Multilayer Ceramic Capacitors
Capacitor Arrays Series
Tape Dimensions
The dimension of paper tape
Size 4x0402 4x0603
Thickness T B
A01.5 ±0.1 2 ±0.1
B02.3 ±0.1 3.5 ±0.1
T0.95 ±0.05 0.95 ±0.05
K0- -
W8 ±0.1 8 ±0.1
P04 ±0.1 4 ±0.1
10xP040 ±0.1 40 ±0.1
P14 ±0.1 4 ±0.1
P22 ±0.05 2 ±0.05
D01.55 ±0.05 1.5 ±0.05
D1- -
E1.75 ±0.05 1.75 ±0.1
F3.5 ±0.05 3.5 ±0.05
Constructions:
Storage and handling conditions
(1) To store products at 5 to 40°C ambient temperature and 20 to 70%. related humidity conditions.
(2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life
extension is needed.
Cautions:
a. The corrosive gas reacts on the terminal electrodes of capacitors, and results in the poor solderability.
Do not store the capacitors in the ambience of corrosive gas (e.g., hydrogen sulde, sulfur dioxide,
chlorine, ammonia gas etc.)
b. In corrosive atmosphere, solderability might be degraded, and silver migration might occur to cause low reliability.
c. Due to the dewing by rapid humidity change, or the photochemical change of the terminal electrode by
direct sunlight,the solderability and electrical performance may deteriorate. Do not store capacitors under
direct sunlight or dewing condition. To store products on the shelf and avoid exposure to moisture.
No. Name NP0 & X7R,
1 Ceramic material BaTiO3 based
2 Inner electrode Ni
3
Termination
Inner layer Cu
4 Middle layer Ni
5 Outer layer Sn (Matt)
www.element14.com
www.farnell.com
www.newark.com
Page <7> V1.012/04/13
Multilayer Ceramic Capacitors
Capacitor Arrays Series
Recommended Soldering Conditions:
The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable against
lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and concentration
of N2 within oven are recommended.
Recommended reow soldering prole for SMT
process with SnAgCu series solder paste.
Recommended wave soldering prole for SMT
process with SnAgCu series solder.
www.element14.com
www.farnell.com
www.newark.com
Page <8> V1.012/04/13
Multilayer Ceramic Capacitors
Capacitor Arrays Series
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
Description Partnumber
Capacitor, RF, 0.1UF, 10V, X7R, 4x0402 MC000249
Capacitor, RF, 0.01UF, 50V, X7R, 4x0603 MC000250
Capacitor, RF, 0.01UF, 50V, X7R, 4x0603 MC000251
Capacitor, RF, 0.01UF, 50V, X7R, 4x0603 MC000252
Capacitor, RF, 100PF, 50V, NP0, 4x0603 MC000253
Capacitor, RF, 150PF, 50V, NP0, 4x0603 MC000254
Capacitor, RF, 180PF, 50V, NP0, 4x0603 MC000255
Capacitor, RF, 220PF, 50V, NP0, 4x0603 MC000256
Capacitor, RF, 33PF, 50V, NP0, 4x0603 MC000257
Capacitor, RF, 330PF, 50V, NP0, 4x0603 MC000258
Capacitor, RF, 100PF, 50V, NP0, 4x0603 MC000259
Capacitor, RF, 220PF, 50V, NP0, 4x0603 MC000260
Capacitor, RF, 47PF, 50V, NP0, 4x0603 MC000261
Capacitor, RF, 470PF, 50V, NP0, 4x0603 MC000262
Capacitor, RF, 470PF, 50V, NP0, 4x0603 MC000263
Capacitor, RF, 0.01UF, 25V, X7R, 4x0603 MC000264
Capacitor, RF, 0.047UF, 16V, X7R, 4x0603 MC000265
Capacitor, RF, 1000PF, 50V, X7R, 4x0603 MC000266
Capacitor, RF, 1000PF, 50V, X7R, 4x0603 MC000267
Capacitor, RF, 0.022UF, 50V, X7R, 4x0603 MC000268
Part Number Table
