INTEGRATED CIRCUITS DIVISION
www.ixysic.com
DS-LCB110-R09 1
LCB110
Single-Pole, Normally Closed
OptoMOS® Relay
e3
Pb
Part # Description
LCB110 6-Pin DIP (50/Tube)
LCB110S 6-Pin Surface Mount (50/Tube)
LCB110STR 6-Pin Surface Mount (1000/Reel)
* For other packaging options consult factory.
Parameter Ratings Units
Blocking Voltage 350 VP
Load Current 120 mArms / mADC
On-Resistance (max) 35
Applications
Features
Description
Ordering Information
Pin Configuration
Telecommunications
Telecom Switching
Tip/Ring Circuits
Modem Switching (Laptop, Notebook,
Pocket Size)
Hook Switch
Dial Pulsing
Ground Start
Ringing Injection
Instrumentation
Multiplexers
Data Acquisition
Electronic Switching
I/O Subsystems
Meters (Watt-Hour, Water, Gas)
Medical Equipment-Patient/Equipment Isolation
Security
Aerospace
Industrial Controls
3750Vrms Input/Output Isolation
Low Drive Power Requirements
(TTL/CMOS Compatible)
Arc-Free With No Snubbing Circuits
FCC Compatible
VDE Compatible
No EMI/RFI Generation
Small 6-Pin Package
Machine Insertable, Wave Solderable
Surface Mount Tape & Reel Version Available
Approvals
Switching Characteristics
of Normally Closed Devices
Form-B
IF
10%
90%
ILOAD
ton
toff
UL Recognized Component: File E76270
CSA Certified Component: Certificate 1175739
EN/IEC 60950-1 Certified Component:
TUV Certificate B 09 07 49410 006
1
3
2
4
5
6
+ Control
– Control
N/C
Load
Do Not Use
Load
AC/DC Configuration
1
3
2
4
5
6
+ Control
– Control
+ Load
– Load
DC Only Configuration
N/C
The LCB110 is a single-pole, normally closed
(1-Form-B) relay that uses optically coupled MOSFET
technology to provide 3750Vrms of input to output
isolation.
Its optically coupled outputs, which use the patented
OptoMOS architecture, are controlled by a highly
efficient GaAIAs infrared LED.
The LCB110 has low on-resistance and is well suited
for most applications requiring a normally closed relay.
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
2R09
LCB110
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Absolute Maximum Ratings @ 25ºC
Parameter Ratings Units
Blocking Voltage 350 VP
Reverse Input Voltage 5 V
Input Control Current 50 mA
Peak (10ms) 1 A
Input Power Dissipation 1150 mW
Total Power Dissipation 2800 mW
Isolation voltage, Input to Output 3750 Vrms
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C
1 Derate linearly 3.33 mW / ºC
1 Derate linearly 6.67 mW / ºC
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Load Current Continuous
AC/DC Confi guration -I
L--
120 mArms / mADC
DC Confi guration 200 mADC
Peak Load Current t=10ms IL- - ±350 mAP
On-Resistance
AC/DC Confi guration IL=120mA RON
-2335
DC Confi guration IL=200mA - 7 10
Off-State Leakage Current IF=5mA, VL=350VPILEAK --1A
Switching Speeds
Turn-On IF=5mA, VL=10V ton - 0.38 3 ms
Turn-Off toff - 0.93 3
Output Capacitance IF=5mA, VL=50V, f=1MHz COUT -25 - pF
Input Characteristics
Input Control Current to Activate IL=120mA IF--5mA
Input Control Current to Deactivate - IF0.4 0.7 - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Reverse Input Current VR=5V IR--10A
Common Characteristics
Input to Output Capacitance - CI/O -3 - pF
Electrical Characteristics @ 25ºC
INTEGRATED CIRCUITS DIVISION
LCB110
www.ixysic.com 3
R09
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
PERFORMANCE DATA @25ºC (Unless Otherwise Noted)*
35
30
25
20
15
10
5
0
1.17 1.19 1.21 1.23 1.25
LED Forward Voltage Drop (V)
Device Count (N)
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
0.25 0.39 0.530.32 0.46
Turn-On Time (ms)
Device Count (N)
25
20
15
10
5
0
0.18
Typical Turn-On Time
(N=50, IF=5mA, IL=120mADC)
0.80 0.90 1.050.75 0.85 0.95
Turn-Off Time (ms)
Device Count (N)
25
20
15
10
5
0
1.0
Typical Turn-Off Time
(N=50, IF=5mA, IL=120mADC)
0.45 0.55 0.65 0.750.50 0.60 0.70
LED Current (mA)
Device Count (N)
25
20
15
10
5
0
Typical IF for Switch Operation
(N=50, IL=120mADC)
25
20
15
10
5
0
0.40 0.50 0.60 0.700.45 0.55 0.65
LED Current (mA)
Device Count (N)
Typical IF for Switch Dropout
(N=50, IL=120mADC)
25
20
15
10
5
0
22.4 23.0 23.6 24.222.7 23.3 23.9
Device Count (N)
Typical On-Resistance Distribution
(N=50, IL=120mADC)
On-Resistance (:)
25
20
15
10
5
0
370 375 380 385 390 395
Blocking Voltage (VP)
Device Count (N)
Typical Blocking Voltage Distribution
(N=50, IF=5mA)
LED Forward Voltage Drop (V)
Typical LED Forward Voltage Drop
vs. Temperature
1.8
1.6
1.4
1.2
1.0
0.8
-40 -20 0 20 40 60 80 120100
I
F
=50mA
I
F
=10mA
I
F
=5mA
Temperature (ºC) LED Forward Current (mA)
Turn-On Time (ms)
05 1015202530354045
0.30
0.25
0.20
0.15
0.10
0.05
0
50
Typical Turn-On Time
vs. LED Forward Current
(IL=120mADC)
LED Forward Current (mA)
Turn-Off Time (ms)
05 1015202530354045
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
50
Typical Turn-Off Time
vs. LED Forward Current
(IL=120mADC)
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
4R09
LCB110
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
PERFORMANCE DATA @25ºC (Unless Otherwise Noted)*
On-Resistance (:)
-40
60
50
40
30
20
10
0
-20 0 20 40 60 80 100
AC/DC Configuration
DC Configuration
Typical On-Resistance
vs. Temperature
(IL=120mADC)
Temperature (ºC)
Turn-On Time (ms)
-40
0.6
0.5
0.4
0.3
0.2
0.1
0
-20 0 20 40 60 80 100
Typical Turn-On Time
vs. Temperature
(IF=5mA, IL=120mADC)
Temperature (ºC)
Turn-Off Time (ms)
-40
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
-20 0 20 40 60 80 100
IF=10mA
Typical Turn-Off Time
vs. Temperature
(IL=120mADC)
Temperature (ºC)
IF=5mA
On-Resistance (:)
-40
50
45
40
35
30
25
20
15
10
5
0
-20 0 20 40 60 80 100
Instantaneous
Typical On-Resistance
vs. Temperature
(IL=100mA)
Temperature (ºC)
LED Current (mA)
-40
3.0
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
Typical IF for Switch Operation
vs. Temperature
(IL=120mADC)
Temperature (ºC)
LED Current (mA)
-40
3.0
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
Temperature (ºC)
Typical IF for Switch Dropout
vs. Temperature
(IL=120mADC)
Load Current (mA)
220
200
180
160
140
120
100
80
60
40
Temperature (ºC)
-40 -20 0 20 40 60 80 120100
DC Configuration
AC/DC Configuration
Maximum Load Current
vs. Temperature
(IF=0mA)
Load Voltage (V)
Load Current (mA)
150
100
50
0
-50
-100
-150
-4 -3 -2 -1 1 2 3
04
Typical Load Current
vs. Load Voltage
Blocking Voltage (VP)
-40
400
395
390
385
380
375
370
365
-20 0 20 40 60 80 100
Temperature (ºC)
Typical Blocking Voltage
vs. Temperature
(IF=5mA)
Leakage (PA)
-40
0.045
0.040
0.035
0.030
0.025
0.020
0.015
0.010
0.005
0-20 0 20 40 60 80 100
Typical Leakage vs. Temperature
Measured Across Pins 4&6
(IF=5mA, VL=350V)
Temperature (ºC) Time
Load Current (A)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
10Ps 1ms 100ms 10s100Ps 10ms 1s 100s
Energy Rating Curve
INTEGRATED CIRCUITS DIVISION
LCB110
www.ixysic.com 5
R09
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Rating
LCB110 / LCB110S MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device Maximum Temperature x Time
LCB110 / LCB110S 250ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
e3
Pb
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
6R09
LCB110
Dimensions
mm
(inches)
PCB Hole Pattern
6.350 ± 0.127
(0.250 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
5.080 ± 0.127
(0.200 ± 0.005)
6 - 0.800 DIA.
(6 - 0.031 DIA.)
0.254 ± 0.0127
(0.010 ± 0.0005)
9.144 ± 0.508
(0.360 ± 0.020)
7.239 TYP
(0.285 TYP)
7.620 ± 0.254
(0.300 ± 0.010)
3.302 ± 0.051
(0.130 ± 0.002) 4.064 TYP
(0.160 TYP)
0.457 ± 0.076
(0.018 ± 0.003)
8.382 ± 0.381
(0.330 ± 0.015) 2.54 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
1.651 ± 0.254
(0.065 ± 0.010)
Pin 1
Dimensions
mm
(inches)
PCB Land Pattern
0.254 ± 0.0127
(0.010 ± 0.0005)
7.620 ± 0.254
(0.300 ± 0.010)
0.635 ± 0.127
(0.025 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
4.445 ± 0.254
(0.175 ± 0.010)
2.54
(0.10)
8.90
(0.3503)
1.65
(0.0649)
0.65
(0.0255)
8.382 ± 0.381
(0.330 ± 0.015) 2.54 ± 0.127
(0.100 ± 0.005)
9.524 ± 0.508
(0.375 ± 0.020) 6.350 ± 0.127
(0.250 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
1.651 ± 0.254
(0.065 ± 0.010)
1.651 ± 0.254
(0.065 ± 0.010)
Pin 1
LCB110
LCB110S
MECHANICAL DIMENSIONS
INTEGRATED CIRCUITS DIVISION
Specification: DS-LCB110-R09
©Copyright 2012, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/22/2012
For additional information please visit our website at: www.ixysic.com
7
LCB110
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to
its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
NOTES:
1. All dimensions carry tolerances of EIA Standard 481-2
2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
Dimensions
mm
(inches)
Embossment
Embossed
Carrier
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
W=16.00
(0.63)
B0 = 10.10
(0.398)
A0 = 10.10
(0.398)
P = 12.00
(0.472)
K1 = 3.80
(0.15)
K0 = 4.90
(0.19)
User Direction of Feed
LCB110STR Tape & Reel
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
IXYS:
LCB110S LCB110STR LCB110