Data Sheet No. PD10061 revF Series PVT212PbF Microelectronic Power IC HEXFET Power MOSFET Photovoltaic Relay (R) Single Pole, Normally Open, 0-150V, 550mA AC / 825mA DC General Description The PVT212 Series Photovoltaic Relay is a single-pole, normally open solid-state relay that can replace electromechanical relays in many applications. It utilizes International Rectifier's proprietary HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator. These SSRs are specifically designed for industrial control and peripheral telecom applications. Series PVT212 Relays are packaged in a 6-lead molded DIP package with either thru-hole or surface mount (`gullwing') terminals. It iss available in standard plastic shipping tubes or on tape-and-reel. Please refer to part identification information Features HEXFET Power MOSFET output Bounce-free operation 4,000 VRMS I/O isolation Very low on-resistance (RDD-ON) Linear AC/DC operation Solid-State Reliability UL recognized ESD Tolerance: 4000V Human Body Model 500V Machine Model . Applications Control of AC (up to 90 VAC) industrial loads Control of DC industrial loads up to +/-120 VDC Telecom line switching Part Identification PVT212PbF PVT212SPbF PVT212S-TPbF thru-hole surface-mount surface-mount, Tape and Reel (HEXFET is the registered trademark for International Rectifier Power MOSFETs) www.irf.com 1 Series PVT212PbF Electrical Specifications (TA = +25C unless otherwise specified) INPUT CHARACTERISTICS Minimum Control Current (see figure 1) Maximum Control Current for Off-State Resistance Control Current Range (Caution: current limit input LED, see figure 5) Maximum Reverse Voltage OUTPUT CHARACTERISTICS Operating Voltage Range Maximum Load Current @ TA=+40C 5mA Control (see figure 1) A Connection B Connection C Connection Maximum On-State Resistance @TA=+25C 100mA Pulsed Load, 5mA Control (see figures 2 & 3) A Connection B Connection C Connection Max. pulsed Load Current @TA=+25C, 10mA Control (10mS @ 10% duty cycle) Maximum Off-State Leakage @TA=+25C, 150V Maximum Turn-On Time @TA=+25C (see figures 6 & 7) For 50mA, 100 VDC load, 10mA Control (5mS pulse width @ 50% duty cycle) Maximum Turn-Off Time @TA=+25C (see figures 6 & 7) For 50mA, 100 VDC load, 10mA Control (5mS pulse width @ 50% duty cycle) Maximum Output Capacitance @ 50VDC, f=1MHz (Cout, see figure 8) GENERAL CHARACTERISTICS Minimum Dielectric Strength, Input-Output Minimum Insulation Resistance, Input-Output Maximum Capacitance, Input-Output Vd=0V, f=1MHz Maximum Pin Soldering Temperature (10 seconds maximum) Ambient Temperature Range: Operating Storage Limits Units 5.0 mA 0.4 5.0 to 25 mA mA 6.0 Limits 0 to 150 V Units V peak 550 600 825 mA mA mA 0.75 0.40 0.25 1200 1.0 mA A 3.0 ms 0.5 100 ms pF Limits 4000 1012 1.0 +260 -40 to +85 -40 to +100 Units VRMS pF C International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in such applications assume all risks of such use and indemnify International Rectifier against all damages resulting from such use. Connection Diagrams www.irf.com 2 Series PVT212PbF 700 ILED = 5mA 2.0 1.5 ILED =3mA 500 1.0 L oad C urrent (mA) Max L oad C urrent (mA ) "A" Connection "A" Connection 600 400 300 0.5 -1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.0 0.2 -1.0 200 -1.5 100 0 0.6 0.8 1.0 I L E D = 5mA 10mS P uls ed, 25C -2.0 Volta ge Drop (V DD ) 0 20 40 60 Ambient Temperature (C) 80 100 Figure 2. Typical On Characteristics Figure 1. Typical Current Derating Curves 1.4 "A" Connection I L ED = 5mA 1.2 1.0 Load Current (A ) 0.4 -0.5 10 mS - P ulse d , 25 C 0.8 25 C 40 C 60 C 85 C 0.6 0.4 0.2 0.0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 VDD (Volts) Ambient Ambient Temperature (oC) Figure 3. Typical On-Characteristics Figure 4. Typical Normalized Off-State Leakage www.irf.com 3 Series PVT212PbF 10.0 "A" Connection 0 0.5 Delay Time (mS ) it & -45C lim max. device TYPICAL min. devic e & +85C limit Input Current (mA) Ton 1.0 Tdly 1.0 Toff 1.5 0.1 2.0 0 5 10 15 LED Forward Voltage Drop (Volts DC) Figure 6. Typical Delay Times (5mS Pulse Width, 100V/50mA Load) Figure 5. Input Characteristics (Current Controlled) 800 "A" Connection 700 T ypic al C apac itanc e (pF ) 600 ILED 90% 500 400 300 200 I D 10% tdly ton 100 toff 0 0 10 20 30 40 50 60 70 80 90 100 V DD Dr a in to Dra in V oltage Figure 7. Delay Time Definitions www.irf.com Figure 8. Typical Output Capacitance 4 Series PVT212PbF Case Outlines 01-2008 01 01-2009 01 IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 This product has been designed and qualified for the Industrial market. Data and specifications subject to change without notice. 2/2008 www.irf.com 5