Tyco/Electronics
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: 800-227-4856
Fax: 800-227-4866
PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: RXE010
DOCUMENT: SCD 22156
PCN: 838429
REV LETTER: I
REV DATE: FEBRUARY 7, 2002
PAGE NO.: 1 OF 1
Specification Status: RELEASED
Electrical Rating
Voltage: 60V MAX
Current: 40A MAX
Insulating Material:
Cured, Flame Retarded Epoxy Polymer
meets UL94 V-0 Requirements
Lead Material:
24 AWG, Solder coated Nickel- Copper alloy
Marking:
Voltage
60
Lot Identification
(can be on back)
Part Identification
X 0
10
TABLE I. DIMENSIONS:
A B C D E F
MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN
mm:
-- 7.4 -- 11.6 4.3 5.8 7.6 -- -- 3.0 --
in*:
-- (0.29) -- (0.46) (0.17) (0.23) (0.30) -- -- (0.12) --
*Rounded off approximation
TABLE II. PERFORMANCE RATINGS:
I H
RATED
CURRENT
CURRENT RATINGS
TIME TO
TRIP
INITIAL
RESISTANCE
VALUES
ONE-HOUR
POST-TRIP
RESISTANCE
STANDARD
TRIP
NOMINAL
TRIPPED-
STATE
POWER
DISSIPATION
AMPERES
20°C AMPERES
AT 0°C AMPERES
AT 20°C AMPERES
AT 60°C SECONDS AT
20°C, 0.5A OHMS
AT 20°C OHMS
AT 20°C WATTS AT
20°C
HOLD HOLD
TRIP HOLD
TRIP
HOLD
TRIP
MAX MIN MAX
MAX NOMINAL
.10 .11 .22 .10 .20 .07 .14 4.0 2.50 4.50
7.5 0.38
Recognitions: UL, CSA and TUV approved.
Approved by UL as a current limiting impedance, per the 1996 NEC, Tables 11 (c) and 11 (b).
Reference Documents: PS300
Precedence: This specification takes precedence over documents referenced herein.
Effectivity: Reference documents shall be the issue in effect on the date of invitation for bid.
CAUTION: Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
