To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
DATA SHEET
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
8-PIN DIP, 600 V BREAK DOWN VOLTAGE
NORMALLY OPEN TYPE
2-ch Optical Coupled MOS FET
Solid State Relay
OCMOS FET
PS7160-2A
,
PS7160L-2A
Document No. PN10290EJ02V0DS (2nd edition)
Date Published July 2006 NS CP(K)
Printed in Japan
−NEPOC Series−
1996, 2006
DESCRIPTION
The PS7160-2A and PS7160L-2A are solid state relays containing GaAs LEDs on the light emitting side (input
side) and MOS FETs on the output side.
They are suitable for analog signal control because of their low offset and high linearity.
The PS7160L-2A has a surface mount type lead.
FEATURES
• 2 channel type (1 a + 1 a output)
• Low LED operating current (IF = 2 mA)
• Designed for AC/DC switching line changer
• Small package (8-pin DIP)
• Low offset voltage
• Ordering number of taping product: PS7160L-2A-E3, E4: 1 000 pcs/reel
• Pb-Free product
• Safety standards
• UL approved: File No. E72422
• BSI approved: No. 8245/8246
• CSA approved: No. CA 101391
APPLICATIONS
• Exchange equipment
• Measurement equipment
• FA/OA equipment
<R>
Data Sheet PN10290EJ02V0DS
2
PS7160-2A,PS7160L-2A
PACKAGE DIMENSIONS (in millimeters)
9.25±0.5
3.5±0.3
4.15±0.3
3.3±0.3
0.5±0.1
2.54
1.34±0.1
0.25 M
0 to 15˚
7.62
6.5±0.5
6.5±0.5
0.10
+0.10
–0.05
0.9±0.25
9.60±0.4
9.25±0.5
3.5±0.3
1.34±0.1
0.25 M
2.54
PS7160L-2A
PS7160-2A
1. LED Anode
2. LED Cathode
3. LED Anode
4. LED Cathode
5. MOS FET
6. MOS FET
7. MOS FET
8. MOS FET
12 43
65
87
TOP VIEW
1. LED Anode
2. LED Cathode
3. LED Anode
4. LED Cathode
5. MOS FET
6. MOS FET
7. MOS FET
8. MOS FET
12 43
65
87
TOP VIEW
Data Sheet PN10290EJ02V0DS 3
PS7160-2A,PS7160L-2A
MARKING EXAMPLE
No. 1 pin
Mark
PS7160-2A
NL601
Country Assembled
Type Number
Assembly Lot
601
Year Assembled
(Last 1 Digit)
LN
Rank Code
In-house Code
(L: Pb-Free)
Week Assembled
<R>
Data Sheet PN10290EJ02V0DS
4
PS7160-2A,PS7160L-2A
ORDERING INFORMATION
Part Number Order Number Solder Plating
Specification
Packing Style Safety Standard
Approval
Application Part
Number*1
PS7160-2A PS7160-2A-A Pb-Free Magazine case 50 pcs Standard products PS7160-2A
PS7160L-2A PS7160L-2A-A (UL, BSI, CSA
PS7160L-2A-E3 PS7160L-2A-E3-A Embossed Tape 1 000 pcs/reel approved)
PS7160L-2A-E4 PS7160L-2A-E4-A
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter Symbol Ratings Unit
Diode Forward Current (DC) IF 50 mA/ch
Reverse Voltage VR 5.0 V
Power Dissipation PD 50 mW/ch
Peak Forward Current *1 IFP 1 A/ch
MOS FET Break Down Voltage VL 600 V
Continuous Load
Current *2
IL 90 (120) mA/ch
Pulse Load Current *2, 3
(AC/DC Connection)
ILP 250 (300) mA/ch
Power Dissipation PD 375 mW/ch
Isolation Voltage *4 BV 1 500 Vr.m.s.
Total Power Dissipation PT 850 mW
Operating Ambient Temperature TA −40 to +85 °C
Storage Temperature Tstg −40 to +100 °C
*1 PW = 100
µ
s, Duty Cycle = 1%
*2 Conditions: IF ≥ 5 mA. Load current ( ) value is.
*3 PW = 100 ms, 1 shot
*4 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output
Pins 1-4 shorted together, 5-8 shorted together.
RECOMMENDED OPERATING CONDITIONS (TA = 25°C)
Parameter Symbol MIN. TYP. MAX. Unit
LED Operating Current IF 2 10 20 mA
LED Off Voltage VF 0 0.5 V
<R>
Data Sheet PN10290EJ02V0DS 5
PS7160-2A,PS7160L-2A
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Diode Forward Voltage VF IF = 10 mA 1.2 1.4 V
Reverse Current IR VR = 5 V 5.0
µ
A
MOS FET Off-state Leakage
Current
ILoff VD = 600 V 0.03 1.0
µ
A
Output Capacitance Cout VD = 0 V, f = 1 MHz 110 pF/ch
Coupled LED On-state Current IFon IL = 90 mA 2.0 mA
On-state Resistance Ron1 IF = 10 mA, IL = 10 mA 42 50 Ω
Ron2 IF = 10 mA, IL = 90 mA, t ≤ 10 ms 33 50
Turn-on Time *1, 2 ton IF = 10 mA, VO = 5 V, RL = 500 Ω, 0.8 1.5 ms
Turn-off Time *1, 2 toff PW ≥ 10 ms 0.06 0.2
Isolation Resistance RI-O VI-O = 1.0 kVDC 109 Ω
Isolation Capacitance CI-O V = 0 V, f = 1 MHz 1.1 pF/ch
*1 Test Circuit for Switching Time
V
L
R
L
I
F
R
in
Pulse Input
Input monitor monitorV
O
t
on
t
off
10 %
90 %
0
V
O
= 5 V
50 %
Output
Input
*2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms.
Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off
time will increase.
<R>
Data Sheet PN10290EJ02V0DS
6
PS7160-2A,PS7160L-2A
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
100
85
7550250–25
20
60
80
100
40
0
Ambient Temperature TA (˚C)
Maximum Forward Current IF (mA)
AMBIENT TEMPERATURE
MAXIMUM FORWARD CURRENT vs.
100
85
7550250–25
25
75
100
125
50
0
150
Ambient Temperature TA (˚C)
Maximum Load Current IL (mA)
AMBIENT TEMPERATURE
MAXIMUM LOAD CURRENT vs.
IF = 50 mA
30 mA
20 mA
10 mA
5 mA
1 mA
100
7550250–25
1.4
1.6
0.8
1.2
1.0
Ambient Temperature TA (˚C)
Forward Voltage VF (V)
AMBIENT TEMPERATURE
FORWARD VOLTAGE vs.
f = 1 MHz
120
10080604020
50
150
200
250
100
0
Applied Voltage VD (V)
Output Capacitance Cout (pF)
APPLIED VOLTAGE
OUTPUT CAPACITANCE vs.
Off-state Leakage Current ILoff (A)
Applied Voltage VD (V)
OFF-STATE LEAKAGE CURRENT vs.
APPLIED VOLTAGE
IF = 10 mA
Load Current IL (mA)
Load Voltage VL (V)
LOAD CURRENT vs. LOAD VOLTAGE
–2.0 2.0–4.0 4.00
50
150
100
–50
–150
–100
6005003001000 200 400
10–3
10–4
10–5
10–6
10–7
10–8
10–9
TA = 85 ˚C
25 ˚C
Remark The graphs indicate nominal characteristics.
Data Sheet PN10290EJ02V0DS 7
PS7160-2A,PS7160L-2A
0.7 0.90.6 0.8 1.0
0
5
10
15
20
25
30
Number (pcs)
Turn-on Time t
on
(ms)
TURN-ON TIME DISTRIBUTION
n = 50 pcs,
I
F
= 10 mA,
V
O
= 5 V
n = 50 pcs,
I
F
= 10 mA,
V
O
= 5 V
0.04 0.08
0
5
10
15
20
25
30
Number (pcs)
Turn-off Time t
off
(ms)
TURN-OFF TIME DISTRIBUTION
40
302010
2.0
4.0
6.0
8.0
0
Turn-on Time t
on
(ms)
Forward Current I
F
(mA)
TURN-ON TIME vs. FORWARD CURRENT
V
O
= 5 V
Turn-off Time t
off
(ms)
Forward Current I
F
(mA)
TURN-OFF TIME vs. FORWARD CURRENT
40302010
0
0.2
0.3
0.5
0.4
0.1
V
O
= 5 V
Normalized to 1.0
at T
A
= 25 ˚C,
I
F
= 10 mA,
I
L
= 10 mA
100
7550250–25
0.5
1.5
2.5
3.0
1.0
0.0
2.0
Ambient Temperature T
A
(˚C)
Normalized On-state Resistance R
on
AMBIENT TEMPERATURE
NORMALIZED ON-STATE RESISTANCE vs.
n = 50 pcs,
I
F
= 10 mA,
I
L
= 10 mA
434241
5
15
20
30
10
0
25
On-state Resistance R
on
(Ω)
Number (pcs)
ON-STATE RESISTANCE DISTRIBTION
Remark The graphs indicate nominal characteristics.
Data Sheet PN10290EJ02V0DS
8
PS7160-2A,PS7160L-2A
Normalized Turn-on Time t
on
Ambient Temperature T
A
(˚C)
NORMALIZED TURN-ON TIME vs.
AMBIENT TEMPERATURE
100
0–25 25 50 75
2.5
3.0
0.0
2.0
1.5
1.0
0.5
Normalized to 1.0
at T
A
= 25 ˚C,
I
F
= 10 mA,
V
O
= 5 V
Normalized Turn-off Time t
off
Ambient Temperature T
A
(˚C)
NORMALIZED TURN-OFF TIME vs.
AMBIENT TEMPERATURE
100
0–25 25 50 75
2.5
3.0
0.0
2.0
1.5
1.0
0.5
Normalized to 1.0
at T
A
= 25 ˚C,
I
F
= 10 mA,
V
O
= 5 V
Remark The graphs indicate nominal characteristics.
Data Sheet PN10290EJ02V0DS 9
PS7160-2A,PS7160L-2A
TAPING SPECIFICATIONS (in millimeters)
Tape Direction
PS7160L-2A-E3 PS7160L-2A-E4
Outline and Dimensions (Tape)
1.55±0.1
2.0±0.1
4.0±0.1
1.75±0.1
4.5 MAX.
10.4±0.1
12.0±0.1
1.5
+0.1
–0
7.5±0.1
10.3±0.1
16.0±0.3
4.0±0.1
0.3
Outline and Dimensions (Reel)
Packing: 1 000 pcs/reel
330±2.0
100±1.0
2.0±0.5
13.0±0.2
R 1.0 21.0±0.8
2.0±0.5
15.9 to 19.4
Outer edge of
flange
21.5±1.0
17.5±1.0
Data Sheet PN10290EJ02V0DS
10
PS7160-2A,PS7160L-2A
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
• Peak reflow temperature 260°C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
220˚C
Package Surface Temperature T (˚C)
Time (s)
(heating)
to 10 s
to 60 s
260˚C MAX.
Recommended Temperature Profile of Infrared Reflow
120±30 s
(preheating)
180˚C
120˚C
(2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120°C or below (package surface temperature)
• Number of times One
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature) 350°C or below
• Time (each pins) 3 seconds or less
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
<R>
Data Sheet PN10290EJ02V0DS 11
PS7160-2A,PS7160L-2A
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
<R>
Data Sheet PN10290EJ02V0DS
12
PS7160-2A,PS7160L-2A
The information in this document is current as of July, 2006. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or
data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all
products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
•
•
•
•
•
•
M8E 02. 11-1
(1)
(2)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
"Standard":
"Special":
"Specific":
0604
NEC Compound Semiconductor Devices Hong Kong Limited
E-mail: contact@ncsd-hk.necel.com
Hong Kong Head Office TEL: +852-3107-7303 FAX: +852-3107-7309
Taipei Branch Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859
Korea Branch Office TEL: +82-2-558-2120 FAX: +82-2-558-5209
NEC Electronics (Europe) GmbH http://www.eu.necel.com/
TEL: +49-211-6503-0 FAX: +49-211-6503-1327
California Eastern Laboratories, Inc. http://www.cel.com/
TEL: +1-408-988-3500 FAX: +1-408-988-0279
Compound Semiconductor Devices Division
NEC Electronics Corporation
URL: http://www.ncsd.necel.com/
For further information, please contact
PS7160-2A,PS7160L-2A
Caution GaAs Products This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
