1N4732A-AP - Micro Commercial Components Corp.

Features

 Hermetic Glass Package

 Silicon Planar Zener Diodes



Mechanical Data

 Case: DO-41 Glass Package



 Weight: 0.309 grams (Approx.)

Maximum Ratings

 Operating Temperature: -65oC to +200oC

 Storage Temperature: -65oC to +200oC

 For capacitive load, derate current by 20%

Electrical Characteristics @ 25oC Unless Otherwise Specified

Note: (1) Valid provided that electrodes at a distance

of 10mm from case are kept at ambient

temperature.

1N4728

THRU

1N476

1.0 Watt

Zener Diode

3.3 to 75 Volts

Cathode

Mark

DO-41G

omponents

20736 Marilla Street Chatsworth



 !"#

$%    !"#

MCC

DC Power

Dissipation Pd 1.0W TA50OC

Forward

Thermal

Resistance RthJA 100K/W Note 1

Power Derating

from 100oCPtot 10mW/oC

Micro Commercial Components

Marking : Cathode band and type number

www.mccsemi.com

1 of 4

1N4728

THRU

1N4761

Voltage VF1.2V

Drop

≤

Revision: A 2011/01/01

Lead Free Finish/Rohs Compliant (Note2) ("P"Suffix designates

Compliant. See ordering information)

(2).Lead in Glass Exemption Applied, see EU Directive Annex 5.

----- ----- 4.50

0.177

MIN MAX MIN M A X

DIMENSIONS

DIM

INCHES MM

NOTE

----- -----

C 0.02 6 0.03 4 0.70 0.90 Di ameter

D 1.00 0 ----- 25.40 -----

B2.80

0.110 Diameter



Moisture Sensitivity: Level 1

Note 1: The JEDEC type number shown with an A suffix have a 5% tolerance on nominal zener voltage. No

suffix signifies a 10% tolerance, C signifies 2%.

2: The Zener impedance is derived from the 60 Hz ac voltage, which results when an ac current having an

rms value equal to 10% of the DC Zener current(IZT or IZK) is superimposed on IZT or IZK. Zener

impedance is measured at two points to insure a sharp knee on the breakdown curve and eliminate

unstable units.

3: The reverse surge current is measured at 25oC ambient using a 1/2 square wave or equivalent sine

wave pulse 1/120 second duration superimposed on I ZT.

4: Voltage measurements tobe performed 90 seconds after application of DC current.

MCC

5: RoHs Compliant already and Pb-free sticker on reel , box & carton indicated RoHs compliant .

MCC Zener Test Surge Maximum

Part Number Voltage Current Current Regulator

Current

VZ @IZT IZT ZZT @IZT ZZK @IZK IZK IR @VRVRIRIZM

Volts mA OHMS OHMS mA uA Volts mA mA

1N4728 3.3 76 10 400 1 100 1 1380 276

1N4729 3.6 69 10 400 1 100 1 1260 252

1N4730 3.9 64 9 400 1 50 1 1190 234

1N4731 4.3 58 9 400 1 10 1 1070 217

1N4732 4.7 53 8 500 1 10 1 970 193

1N4733 5.1 49 7 550 1 10 1 890 178

1N4734 5.6 45 5 600 1 10 2 810 162

1N4735 6.2 41 2 700 1 10 3 730 146

1N4736 6.8 37 3.5 700 1 10 4 660 133

1N4737 7.5 34 4 700 0.5 10 5 605 121

1N4738 8.2 31 4.5 700 0.5 10 6 550 110

1N4739 9.1 28 5 700 0.5 10 7 500 100

1N4740 10 25 7 700 0.25 10 7.6 454 91

1N4741 11 23 8 700 0.25 5 8.4 414 83

1N4742 12 21 9 700 0.25 5 9.1 380 76

1N4743 13 19 10 700 0.25 5 9.9 344 69

1N4744 15 17 14 700 0.25 5 11.4 304 61

1N4745 16 15.5 16 700 0.25 5 12.2 285 57

1N4746 18 14 20 750 0.25 5 13.7 250 50

1N4747 20 12.5 22 750 0.25 5 15.2 225 45

1N4748 22 11.5 23 750 0.25 5 16.7 205 41

1N4749 24 10.5 25 750 0.25 5 18.2 190 38

1N4750 27 9.5 35 750 0.25 5 20.6 170 34

1N4751 30 8.5 40 1000 0.25 5 22.8 150 30

1N4752 33 7.5 45 1000 0.25 5 25.1 135 27

1N4753 36 7 50 1000 0.25 5 27.4 125 25

1N4754 39 6.5 60 1000 0.25 5 29.7 115 23

1N4755 43 6 70 1500 0.25 5 32.7 110 22

1N4756 47 5.5 80 1500 0.25 5 35.8 95 19

1N4757 51 5 95 1500 0.25 5 38.8 90 18

1N4758 56 4.5 110 2000 0.25 5 42.6 80 16

1N4759 62 4 125 2000 0.25 5 47.1 70 14

1N4760 68 3.7 150 2000 0.25 5 51.7 65 13

1N4761 75 3.3 175 2000 0.25 5 56 60 12

Leakage Current

Maximum ReverseMaximum Dynamic Impedance

Electrical Characteristics(TA= 25°C unless otherwise noted). Maximum VF= 1.2V at IF= 200mA

1N4728 thru 1N4761

www.mccsemi.com

2 of 4

Micro Commercial Components

MCC

Revision: A 2011/01/01

1N4728 thru 1N4761

www.mccsemi.com

3 of 4

MCC

Micro Commercial Components

Figure 3. Effect of Zener Current

on Zener Impedance Figure 4. Effect of Zener Voltage

on Zener Impedance

1000

500

200

100

10.1 0.2 0.5 1 2 5 10 20 50 100

IZ, ZENER CURRENT (mA)

ZZ, DYNAMIC IMPEDANCE (OHMS)

1000

700

500

200

100

11 2 100

VZ, ZENER CURRENT (mA)

3 5 7 10 20 30 50 70

ZZ, DYNAMIC IMPEDANCE (OHMS)

TJ = 25

iZ(rms) = 0.1 IZ(dc)

f = 60 Hz

6.2 V

27 V

VZ = 2.7 V

47 V

TJ = 25

iZ(rms) = 0.1 IZ(dc)

f = 60 Hz

20 mA

5 mA

IZ = 1 mA

Figure 1. Typical Thermal Resistance

versus Lead Length Figure 2. Effect of Zener Current

175

150

125

100

00 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

L, LEAD LENGTH TO HEAT SINK (INCHES)

JL , JUNCTION-TO-LEAD THERMAL RESISTANCE (mV/

C/W)

VZ, TEMPERATURE COEFFICIENT (mV/

–2

–4 3 4 5 6 7 8

VZ, ZENER VOLTAGE (VOLTS)

VZ@ IZ

TA= 25

20 mA

0.01 mA

1 mA

NOTE: BELOW 3 VOLTS AND ABOVE 8 VOLTS

NOTE: CHANGES IN ZENER CURRENT DO NOT

NOTE: EFFECT TEMPERATURE COEFFICIENTS

Figure 5. Maximum Surge Power

100

10.01 0.02 0.05 0.1 0.2 0.5 1 2 5 10 20 50 100 200 500 1000

PW, PULSE WIDTH (ms)

This graph represents 90 percentile data points.

For worst case design characteristics, multiply surge power by 2/3.

Ppk, PEAK SURGE POWER (WATTS)

11 V–100 V NONREPETITIVE

3.3 V–10 V NONREPETITIVE

5% DUTY CYCLE

10% DUTY CYCLE

20% DUTY CYCLE

RECTANGULAR

WAVEFORM

TJ= 25

C PRIOR TO

INITIAL PULSE

Revision: A 2011/01/01

MCC

Micro Commercial Components

www.mccsemi.com

4 of 4

Revision: A 2011/01/01

Device Packing

Part Number-TP Tape&Reel: 5Kpcs/Reel

Part Number-AP Ammo Packing: 2.5Kpcs/Ammo Box

Part Number-BP Bulk: 50Kpcs/Carton

Ordering Information :

***IMPORTANT NOTICE***

Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to

make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components

Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it

convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all

risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are

represented on our website, harmless against all damages.

***LIFE SUPPORT***

MCC's products are not authorized for use as critical components in life support devices or systems without the express written

approval of Micro Commercial Components Corporation.

***CUSTOMER AWARENESS***

Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking

strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages

customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on

our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine

parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty

coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global

problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized

distributors.