SaRonix Crystal Clock Oscillator 3.3V, Tri-State, HCMOS Technical Data NTH / NCH Series ACTUAL SIZE Frequency Range: 1 MHz to 70 MHz Frequency Stability: 25, 50 or 100 ppm over all conditions: calibration tolerance, operating temperature, input voltage change, load change, aging, shock and vibration. Temperature Range: Operating: Storage: 0 to +70C or -40 to +85C, See Part Numbering Guide -55 to +125C Supply Voltage: Recommended Operating: 3.3V 10% Supply Current: Frequency: 1 to 27 MHz 27+ to 70 MHz 15mA max 25mA max Output Drive: Description HCMOS A crystal controlled, low current oscillator providing precise rise and fall times to drive High Speed HCMOS and NMOS microprocessors. The tri-state function on the NTH enables the output to go high impedance. Device is packaged in a 14 or an 8-pin DIP compatible resistance welded, all metal grounded case, to reduce EMI. Applications & Features * * * * * Clock 16 and 32 bit microprocessors Tri-State output on NTH HCMOS compatible Available up to 70 MHz Grounded, all metal, full size or half size case * Plastic SMD available, see separate data sheet Symmetry: Rise and Fall Times: Logic 0: Logic 1: Load: Jitter: 40/60% or 45/55% max @ 50% VDD, See Part Numbering Guide 4ns max 20% to 80% VDD 10% VDD max 90% VDD min 30 pF 8ps max RMS period jitter, 1ps max 1 cycle-to-cycle jitter Mechanical: Shock: Solderability: Terminal Strength: Vibration: Solvent Resistance: Resistance to Soldering Heat: MIL-STD-883, MIL-STD-883, MIL-STD-202, MIL-STD-883, MIL-STD-202, MIL-STD-202, Method 2002, Condition B Method 2003 Method 211, Conditions A & C Method 2007, Condition A Method 215 Method 210, Condition A, B or C Environmental: Gross Leak Test: Fine Leak Test: Thermal Shock: Moisture Resistance: MIL-STD-883, MIL-STD-883, MIL-STD-883, MIL-STD-883, Method Method Method Method 1014, Condition C 1014, Condition A2 1011, Condition A 1004 Output Waveform CMOS Tf Tr Logic 1 80% VDD 50% VDD 20% VDD Logic 0 SYMMETRY DS-159 SaRonix REV B 3.8.1 141 Jefferson Drive * Menlo Park, CA 94025 * USA * 650-470-7700 * 800-227-8974 * Fax 650-462-9894 SaRonix Crystal Clock Oscillator 3.3V, Tri-State, HCMOS Technical Data NTH / NCH Series Package Details Part Numbering Guide FULL SIZE PACKAGE NTH 0 8 0 C 21.0 max .825 0.91 .036 max 5.08 max .200 .46.08 .018.003 6.350.51 0.250.02 15.24.13 .600.005 Pin 1 Tri-State - NTH N/C - NCH Pin 7 GND NTH - Tri state NCH - Pin 1 N/C Frequency 3.3V Supply 7.75 max .305 Pin 8 Output Standard Marking Format** Includes Date Code, Frequency & Model SARONIX XTAL OSC Package 0 = Full Size, Thru-Hole 9 = Half Size, Thru-Hole Frequency Range 3 = 1 to 4 MHz 6 = 4+ to 24 MHz 8 = 24+ to 70 MHz Example PN: NTH080C3 - 24.0001 (4) Glass Insulators Stability Tolerance C = 100ppm B = 50ppm A = 25ppm ( 0 to +70C only) Symmetry 0 = 40/60% max, 0 to 70C A = 45/55% max, 0 to 70C 2 = 40/60% max, -40 to 85C 4 = 45/55% max, -40 to 85C, 50 MHz max 13.0 max .510 Pin 14 +5 VDC 3 - 40.0000 Tri-State Logic Table (NTH only) Pin 1 Input Pin 8 (5) Output Logic 1 or NC Oscillation Logic 0 or GND High Impedance Required Input Levels on Pin 1: Logic 1 = 2.2V min Logic 0 = 0.8V max Denotes Pin 1 Test Circuit HALF SIZE PACKAGE 13.0 max .510 0.91 max .036 5.08 max .200 6.350.51 0.250.02 .46.08 .018.003 Pin 1 Tri-State - NTH N/C - NCH 1.5 .059 120 13.0 .510 max Pin 8 V DD Pin 4 GND 120 120 7.62.20 .300.008 Pin 14 (8) Pin 8 (5) VDD POWER SUPPLY 7.62.20 .300.008 TEST POINT mA M OUT CL = 30 pF (Note A) OSCILLATOR VM GND Pin 1 (1)* Pin 7 (4) TRI-STATE INPUT (NTH only) NOTE A: CL includes probe and fixture capacitance *( ) Indicates pin numbers for half-size package 1.7 .067 6.0 .236 Pin 5 Output Standard Marking Format** Includes Date Code, Frequency & Model SARONIX Denotes Pin 1 All specifications are subject to change without notice. **Exact loaction of items may vary DS-159 SaRonix REV B 3.8.2 141 Jefferson Drive * Menlo Park, CA 94025 * USA * 650-470-7700 * 800-227-8974 * Fax 650-462-9894