09/2008 150
GENERAL TECHNICAL DATA
Dielectric: polypropylene lm.
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin lled.
Box material is solvent resistant and ame retardant according to
UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive ammability category, manufacturing date code, approvals,
manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range: -40 to +110°C
Related documents: IEC 60384-14, EN 60384-14.
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 275Vac (50/60Hz) / 560 Vdc
300Vac (50/60Hz) / 630 Vdc
Capacitance range: 0.01µF to 10µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M);
tolerance ±5% (J) available upon request
Dissipation factor (DF):
tgδ 10-4 at +25°C ±5°C: ≤10 (6)* at 1kHz *
Typical value
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge: 100 Vdc
Performance
≥1x105 MΩ (5x105 MΩ )* for C≤0.33µF
≥30000 s (150000 s )* for C>0.33µF
* Typical value
Test voltage between terminations (on all pieces):
1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C
R.46
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Typical applications: interference suppression and
«across-the-line» applications. Suitable for use in situations
where failure of the capacitor would not lead to danger of
electric shock.
PRODUCT CODE: R46
Note: R.46 series has replaced the 1.40 series and 1.47 series.
For new design we suggest the use of the R.46 series.
Ø d ±0.05 p ≤15 22.5 ≤ p ≤ 27.5 p = 37.5
0.6 or 0.8* 0.8 1
*See size table.
All dimensions are in mm.
Loose Taped
Fig.1 Fig.2
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions 1st
Temperature: +40°C ± 2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Test conditions 2nd
Temperature: +60°C ± 2°C
Relative humidity (RH): 95% ±2%
Test duration: 500 hours
Performance
Dielectric strength: no dielectric breakdown or
ashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|: ≤5%
Insulation resistance: ≥50% of initial limit.
Endurance:
Test conditions
Temperature: +110°C ± 2°C
Test duration: 1000 h
Voltage applied: 1.25 x VR +1000Vac 0.1 s/h
Performance
Dielectric strength: no dielectric breakdown or
ashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|: ≤10%
Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen):10 s ± 1 s
Performance
Capacitance change |∆C/C|: ≤2%
Winding scheme
single sided metallized
polypropylene lm
Pitch Box thickness (B) Maximum dimensions (mm)
(mm) (mm) B max H max L max
10.0 All B +0.2 H +0.1 L +0.2
15.0 <7.5 B +0.2 H +0.1 L +0.3
15.0 ≥7.5 B +0.2 H +0.1 L +0.5
22.5 All B +0.2 H +0.1 L +0.3
27.5 All B +0.2 H +0.1 L +0.3
37.5 All B +0.3 H +0.1 L +0.3
Insulated rigid leads Insulated exible leads 0.5mm2
Not for use in series with the mains.
See www.kemet.com for more information.
09/2008
151
R.46
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
APPROVALS
.
(**) ENEC mark has replaced all the following European
National marks:
All dimensions are in mm
E12 Series available upon request
Table 1
Standard
packaging style
Lead
length
(mm)
Taping style Ordering
code
(Digit 10 to
11)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
AMMO-PACK
AMMO-PACK
12.70
19.05
1
2
10.0/15.0
22.5
DQ
DQ
REEL Ø500mm
REEL Ø500mm
12.70
19.05
1
2
10.0/15.0
22.5/27.5
CK
CK
Loose, short leads
Loose, long leads
Loose, long leads
04 +2
25 -1/+2
30 +5
00
50
40
Loose, insulated
rigid leads
Loose, insulated
exible leads
30 +5
150 ±5
51
52
Note: Ammo-pack is the preferred packaging for taped version.
For “capacitor connected in serial with main line” (two - phase and
three - phase net) application, please read the “SHORT GUIDE TO
CHOOSE THE RIGHT FILM CAPACITORS” at pag. 178 and contact
our Technical Service for choosing the safest solution.
Rated Cap. 275 Vac / 560 Vdc
Std dimensions
Ø d Max
dv/dt at
390Vdc
Part Number
B H L p (V/ µs)
0.010 µF 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2100 - - N0 -
0.015 µF 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2150 - - N0 -
0.022 µF 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2220 - - N0 -
0.033 µF 5.0 11.0 13.0 10.0 0.6 500 R46 KF 2330 - - M1 -
0.047 µF 5.0 11.0 13.0 10.0 0.6 500 R46 KF 2470 - - N0 -
0.068 µF 6.0 12.0 13.0 10.0 0.6 500 R46 KF 2680 - - M1 -
0.10 µF 6.0 12.0 13.0 10.0 0.6 500 R46 KF 3100 - - M1 M
0.010 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2100 - - 01 -
0.015 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2150 - - 01 -
0.022 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2220 - - 01 -
0.033 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2330 - - 01 -
0.047 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2470 - - 01 -
0.068 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2680 - - 01 -
0.10 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 3100 - - M1 -
0.15 µF 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3150 - - M2 -
0.15 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3150 - - L2 -
0.22 µF 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3220 - - M2 -
0.22 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3220 - - L2 -
0.22 µF 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3220 - - 02 -
0.33 µF 8.5 14.5 18.0 15.0 0.6 400 R46 KI 3330 - - N0 -
0.33 µF 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3330 - - M1 -
0.33 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3330 - - N1 M
0.33 µF 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3330 - - 02 -
0.33 µF 13.0 12.0 18.0 15.0 0.8 400 R46 KI 3330 - - 01 -
0.47 µF 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3470 - - 02 M
0.47 µF 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3470 - - N0 M
0.47 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3470 - - M1 -
0.56 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3560 - - N0 -
0.60 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3600 - - N0 -
0.15 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3150 - - 01 -
0.22 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3220 - - M1 -
0.33 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3330 - - N0 -
0.47 µF 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3470 - - N0 -
0.68 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 3680 - - M2 -
1.0 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4100 - - N2 M
1.0 µF 11.0 20.0 26.5 22.5 0.8 200 R46 KN 4100 - - N1 -
0.47 µF 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3470 - - 01 -
0.68 µF 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3680 - - M1 -
1.0 µF 11.0 20.0 32.0 27.5 0.8 150 R46 KR 4100 - - M1 -
1.5 µF 13.0 22.0 32.0 27.5 0.8 150 R46 KR 4150 - - M1 -
2.2 µF 13.0 25.0 32.0 27.5 0.8 150 R46 KR 4220 - - M2 -
2.2 µF 14.0 28.0 32.0 27.5 0.8 150 R46 KR 4220 - - M1 -
3.3 µF 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4330 - - M2 -
4.7 µF 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4470 - - M2 -
4.7 µF 22.0 37.0 32.0 27.5 0.8 150 R46 KR 4470 - - M1 -
1.5 µF 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4150 - - M1 -
2.2 µF 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4220 - - M2 M
2.2 µF 13.0 24.0 41.5 37.5 1.0 100 R46 KW 4220 - - M1 -
3.3 µF 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4330 - - M1 -
4.7 µF 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4470 - - M2 M
4.7 µF 19.0 32.0 41.5 37.5 1.0 100 R46 KW 4470 - - M1 -
6.8 µF 20.0 40.0 41.5 37.5 1.0 100 R46 KW 4680 - - M2 -
6.8 µF 24.0 44.0 41.5 37.5 1.0 100 R46 KW 4680 - - M1 -
10.0 µF 30.0 45.0 41.5 37.5 1.0 100 R46 KW 5100 - - M1 -
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
(**)
ENEC
IEC 60384-14 Class X2 File No.V4413
UL 1414
(up to 1µF, 85°C;
250Vac)
Across-the-line File No.E97797
CSA - C22.2 No.1
(up to 1µF, 85°C;
250Vac)
Across-the-line
certied for
Canada
File No.E97797
UL 1283
(310 Vac)
Electromagnetic
Interference
Filters
File No.E85238
CSA - C22.2 No.8
(310 Vac)
Electromagnetic
Interference
Filters certied
for Canada
File No.E85238
GB/T 14472 Class X2 File CQC03001008199
CQC03001008842
Approved according to IEC 60384-14
According to IEC 60065
09/2008 152
R.46
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
APPROVALS
.
(**) ENEC mark has replaced all the following European
National marks:
Table 1
Standard
packaging style
Lead
length
(mm)
Taping style Ordering
code
(Digit 10 to 11)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
AMMO-PACK
AMMO-PACK
12.70
19.05
1
2
10.0/15.0
22.5
DQ
DQ
REEL Ø500mm
REEL Ø500mm
12.70
19.05
1
2
10.0/15.0
22.5/27.5
CK
CK
Loose, short leads
Loose, long leads
Loose, long leads
04 +2
25 -1/+2
30 +5
00
50
40
Loose, insulated
rigid leads
Loose, insulated
exible leads
30 +5
150 ±5
51
52
Note: Ammo-pack is the preferred packaging for taped version.
For “capacitor connected in serial with main line” (two - phase and
three - phase net) application, please read the “SHORT GUIDE TO
CHOOSE THE RIGHT FILM CAPACITORS” at pag. 178 and contact
our Technical Service for choosing the safest solution.
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
All dimensions are in mm
E12 Series available upon request
(**)
ENEC
IEC 60384-14 Class X2 File No.V4413
UL 1414
(up to 1µF, 85°C;
250Vac)
Across-the-line File No.E97797
CSA - C22.2 No.1
(up to 1µF, 85°C;
250Vac)
Across-the-line
certied for
Canada
File No.E97797
UL 1283
(310 Vac)
Electromagnetic
Interference
Filters
File No.E85238
CSA - C22.2 No.8
(310 Vac)
Electromagnetic
Interference
Filters certied
for Canada
File No.E85238
GB/T 14472 Class X2
File
CQC03001008199
CQC03001008842
Approved according to IEC 60384-14
According to IEC 60065
Rated Cap. 275 Vac / 560 Vdc
Std dimensions
Ø d Max
dv/dt at
390Vdc
Part Number
B H L p (V/ µs)
0.033 µF 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2330 - - P0 -
0.047 µF 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2470 - - P0 -
0.068 µF 5.0 11.0 13.0 10.0 0.6 500 R46 KF 2680 - - P0 -
0.1 µF 5.0 11.0 13.0 10.0 0.6 500 R46 KF 3100 - - P1 M
0.1 µF 6.0 12.0 13.0 10.0 0.6 500 R46 KF 3100 - - P0 -
0.15 µF 6.0 12.0 13.0 10.0 0.6 500 R46 KF 3150 - - P0 M
0.15 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 3150 - - P0 -
0.22 µF 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3220 - - P0 -
0.33 µF 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3330 - - P0 -
0.33 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3330 - - P1
0.33 µF 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3330 - - P2 -
0.47 µF 8.5 14.5 18.0 15.0 0.6 400 R46 KI 3470 - - P0
0.47 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3470 - - P1 M
0.47 µF 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3470 - - P2 M
0.47 µF 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3470 - - P3 -
0.68 µF 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3680 - - P1 M
0.68 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3680 - - P0 -
0.82 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3820 - - P0 M
0.47 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3470 - - P1 -
0.56 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3560 - - P1 M
0.56 µF 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3560 - - P0 -
0.68 µF 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3680 - - P0 -
1.0 µF 8.5 17.0 26.5 22.5 0.8 200 R46 KN 4100 - - P1 M
1.0 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4100 - - P0 -
1.5 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4150 - - P1 M
1.5 µF 11.0 20.0 26.5 22.5 0.8 200 R46 KN 4150 - - P0 -
2.2 µF 13.0 22.0 26.5 22.5 0.8 200 R46 KN 4220 - - P0 M
1.0 µF 9.0 17.0 32.0 27.5 0.8 150 R46 KR 4100 - - P0 -
1.5 µF 11.0 20.0 32.0 27.5 0.8 150 R46 KR 4150 - - P0 -
2.2 µF 13.0 22.0 32.0 27.5 0.8 150 R46 KR 4220 - - P0 -
3.3 µF 14.0 28.0 32.0 27.5 0.8 150 R46 KR 4330 - - P0 -
4.7 µF 14.0 28.0 32.0 27.5 0.8 150 R46 KR 4470 - - P1 M
4.7 µF 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4470 - - P0 -
6.8 µF 22.0 37.0 32.0 27.5 0.8 150 R46 KR 4680 - - P0 -
2.2 µF 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4220 - - P0 -
3.3 µF 13.0 24.0 41.5 37.5 1.0 100 R46 KW 4330 - - P0 -
4.7 µF 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4470 - - P0 -
6.8 µF 19.0 32.0 41.5 37.5 1.0 100 R46 KW 4680 - - P0 -
10.0 µF 20.0 40.0 41.5 37.5 1.0 100 R46 KW 5100 - - P0 -
Not for use in series with the mains.
See www.kemet.com for more information.
09/2008
153
R.46
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
APPROVALS
Table 1
Standard
packaging style
Lead
length
(mm)
Taping style Ordering
code
(Digit 10 to 11)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
AMMO-PACK
AMMO-PACK
12.70
19.05
1
2
10.0/15.0
22.5
DQ
DQ
REEL Ø500mm
REEL Ø500mm
12.70
19.05
1
2
10.0/15.0
22.5/27.5
CK
CK
Loose, short leads
Loose, long leads
Loose, long leads
04 +2
25 -1/+2
30 +5
00
50
40
Loose, insulated
rigid leads
Loose, insulated
exible leads
30 +5
150 ±5
51
52
Note: Ammo-pack is the preferred packaging for taped version.
(**) ENEC mark has replaced all the following European
National marks:
Rated voltage (3=300Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
All dimensions are in mm
E12 Series available upon request
For “capacitor connected in serial with main line” (two - phase and
three - phase net) application, please read the “SHORT GUIDE TO
CHOOSE THE RIGHT FILM CAPACITORS” at pag. 178 and contact
our Technical Service for choosing the safest solution.
(**)
ENEC
IEC 60384-14 Class X2 File No.V4413
UL 1414
(up to 1µF, 85°C;
250Vac)
Across-the-line File No.E97797
CSA - C22.2 No.1
(up to 1µF, 85°C;
250Vac)
Across-the-line
certied for
Canada
File No.E97797
UL 1283
(310 Vac)
Electromagnetic
Interference
Filters
File No.E85238
CSA - C22.2 No.8
(310 Vac)
Electromagnetic
Interference
Filters certied for
Canada
File No.E85238
GB/T 14472 Class X2 FileCQC03001008199
CQC03001008842
Approved according to IEC 60384-14
According to IEC 60065
Rated Cap. 300 Vac / 630 Vdc
Std dimensions
Ø d Max
dv/dt at
390Vdc
Part Number
B H L p (V/ µs)
0.010 µF 4.0 9.0 13.0 10.0 0.6 500 R46 3F 2100 - - N0 -
0.015 µF 4.0 9.0 13.0 10.0 0.6 500 R46 3F 2150 - - N0 -
0.022 µF 4.0 9.0 13.0 10.0 0.6 500 R46 3F 2220 - - N0 -
0.033 µF 5.0 11.0 13.0 10.0 0.6 500 R46 3F 2330 - - M1 -
0.047 µF 5.0 11.0 13.0 10.0 0.6 500 R46 3F 2470 - - N0 -
0.068 µF 6.0 12.0 13.0 10.0 0.6 500 R46 3F 2680 - - M1 -
0.10 µF 6.0 12.0 13.0 10.0 0.6 500 R46 3F 3100 - - M1 M
0.010 µF 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2100 - - 01 -
0.015 µF 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2150 - - 01 -
0.022 µF 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2220 - - 01 -
0.033 µF 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2330 - - 01 -
0.047 µF 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2470 - - 01 -
0.068 µF 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2680 - - 01 -
0.10 µF 5.0 11.0 18.0 15.0 0.6 400 R46 3I 3100 - - M1 -
0.15 µF 6.0 12.0 18.0 15.0 0.6 400 R46 3I 3150 - - M2 -
0.15 µF 9.0 12.5 18.0 15.0 0.6 400 R46 3I 3150 - - L2 -
0.22 µF 7.5 13.5 18.0 15.0 0.6 400 R46 3I 3220 - - M2 -
0.22 µF 9.0 12.5 18.0 15.0 0.6 400 R46 3I 3220 - - L2 -
0.22 µF 6.0 17.5 18.0 15.0 0.6 400 R46 3I 3220 - - 02 -
0.33 µF 8.5 14.5 18.0 15.0 0.6 400 R46 3I 3330 - - N0 -
0.33 µF 10.0 16.0 18.0 15.0 0.8 400 R46 3I 3330 - - M1 -
0.33 µF 7.5 18.5 18.0 15.0 0.8 400 R46 3I 3330 - - 02 -
0.33 µF 13.0 12.0 18.0 15.0 0.8 400 R46 3I 3330 - - 01 -
0.47 µF 10.0 16.0 18.0 15.0 0.8 400 R46 3I 3470 - - N0 M
0.47 µF 11.0 19.0 18.0 15.0 0.8 400 R46 3I 3470 - - M1 -
0.56 µF 11.0 19.0 18.0 15.0 0.8 400 R46 3I 3560 - - N0 -
0.60 µF 11.0 19.0 18.0 15.0 0.8 400 R46 3I 3600 - - N0 -
0.15 µF 6.0 15.0 26.5 22.5 0.8 200 R46 3N 3150 - - 01 -
0.22 µF 6.0 15.0 26.5 22.5 0.8 200 R46 3N 3220 - - M1 -
0.33 µF 6.0 15.0 26.5 22.5 0.8 200 R46 3N 3330 - - N0 -
0.47 µF 7.0 16.0 26.5 22.5 0.8 200 R46 3N 3470 - - N0 -
0.68 µF 10.0 18.5 26.5 22.5 0.8 200 R46 3N 3680 - - M2 -
1.0 µF 10.0 18.5 26.5 22.5 0.8 200 R46 3N 4100 - - N2 M
1.0 µF 11.0 20.0 26.5 22.5 0.8 200 R46 3N 4100 - - N1 -
0.47 µF 9.0 17.0 32.0 27.5 0.8 150 R46 3R 3470 - - 01 -
0.68 µF 9.0 17.0 32.0 27.5 0.8 150 R46 3R 3680 - - M1 -
1.0 µF 11.0 20.0 32.0 27.5 0.8 150 R46 3R 4100 - - M1 -
1.5 µF 13.0 22.0 32.0 27.5 0.8 150 R46 3R 4150 - - M1 -
2.2 µF 13.0 25.0 32.0 27.5 0.8 150 R46 3R 4220 - - M2 -
2.2 µF 14.0 28.0 32.0 27.5 0.8 150 R46 3R 4220 - - M1 -
3.3 µF 18.0 33.0 32.0 27.5 0.8 150 R46 3R 4330 - - M2 -
4.7 µF 18.0 33.0 32.0 27.5 0.8 150 R46 3R 4470 - - M2 -
4.7 µF 22.0 37.0 32.0 27.5 0.8 150 R46 3R 4470 - - M1 -
1.5 µF 11.0 22.0 41.5 37.5 1.0 100 R46 3W 4150 - - M1 -
2.2 µF 11.0 22.0 41.5 37.5 1.0 100 R46 3W 4220 - - M2 M
2.2 µF 13.0 24.0 41.5 37.5 1.0 100 R46 3W 4220 - - M1 -
3.3 µF 16.0 28.5 41.5 37.5 1.0 100 R46 3W 4330 - - M1 -
4.7 µF 16.0 28.5 41.5 37.5 1.0 100 R46 3W 4470 - - M2 M
4.7 µF 19.0 32.0 41.5 37.5 1.0 100 R46 3W 4470 - - M1 -
6.8 µF 20.0 40.0 41.5 37.5 1.0 100 R46 3W 4680 - - M2 -
6.8 µF 24.0 44.0 41.5 37.5 1.0 100 R46 3W 4680 - - M1 -
10.0 µF 30.0 45.0 41.5 37.5 1.0 100 R46 3W 5100 - - M1 -
Not for use in series with the mains.
See www.kemet.com for more information.
09/2008 154
R.46
X2 CLASS (IEC 60384-14) - MKP
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Typical applications: interference suppression and «across-
the-line» applications. Suitable for use in situations where
failure of the capacitor would not lead to danger of electric
shock.
PRODUCT CODE: R46
NEW 125°C
Rated
Cap.
275 Vac / 560 Vdc
Std dimensions Ø d
Max
dv/dt at
390Vdc
(V/ µs)
Part Number
B H L p
0.010 µF 5.0 11.0 13.0 10.0 0.6 500 R46 K F 2100 - - H1 -
0.015 µF 5.0 11.0 13.0 10.0 0.6 500 R46 K F 2150 - - H1 -
0.022 µF 5.0 11.0 13.0 10.0 0.6 500 R46 K F 2220 - - H1 -
0.033 µF 5.0 11.0 13.0 10.0 0.6 500 R46 K F 2330 - - H1 -
0.047 µF 6.0 12.0 13.0 10.0 0.6 500 R46 K F 2470 - - H1 -
0.068 µF 6.0 12.0 13.0 10.0 0.6 500 R46 K F 2680 - - H1 M
0.010 µF 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2100 - - H1 -
0.015 µF 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2150 - - H1 -
0.022 µF 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2220 - - H1 -
0.033 µF 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2330 - - H1 -
0.047 µF 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2470 - - H1 -
0.068 µF 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2680 - - H1 -
0.10 µF 6.0 12.0 18.0 15.0 0.6 400 R46 K I 3100 - - H1 -
0.15 µF 6.0 17.5 18.0 15.0 0.6 400 R46 K I 3150 - - H2 -
0.15 µF 9.0 12.5 18.0 15.0 0.6 400 R46 K I 3150 - - H3 -
0.15 µF 7.5 13.5 18.0 15.0 0.6 400 R46 K I 3150 - - H1 -
0.22 µF 8.5 14.5 18.0 15.0 0.6 400 R46 K I 3220 - - H1 -
0.22 µF 6.0 17.5 18.0 15.0 0.6 400 R46 K I 3220 - - H2 M
0.22 µF 9.0 12.5 18.0 15.0 0.6 400 R46 K I 3220 - - H3 M
0.22 µF 7.5 18.5 18.0 15.0 0.8 400 R46 K I 3220 - - H4 -
0.33 µF 10.0 16.0 18.0 15.0 0.8 400 R46 K I 3330 - - H1 M
0.33 µF 7.5 18.5 18.0 15.0 0.8 400 R46 K I 3330 - - H2 M
0.33 µF 13.0 12.0 18.0 15.0 0.8 400 R46 K I 3330 - - H3 M
0.47 µF 11.0 19.0 18.0 15.0 0.8 400 R46 K I 3470 - - H1 M
0.15 µF 6.0 15.0 26.5 22.5 0.8 200 R46 K N 3150 - - H1 -
0.22 µF 6.0 15.0 26.5 22.5 0.8 200 R46 K N 3220 - - H1 -
0.33 µF 7.0 16.0 26.5 22.5 0.8 200 R46 K N 3330 - - H1 -
0.47 µF 10.0 18.5 26.5 22.5 0.8 200 R46 K N 3470 - - H1 -
0.68 µF 11.0 20.0 26.5 22.5 0.8 200 R46 K N 3680 - - H1 -
1.0 µF 13.0 22.0 26.5 22.5 0.8 200 R46 K N 4100 - - H1 -
300Vac available upon request
E12 Series available upon request
All dimensions are in mm
Loose Taped
Fig.1 Fig.2
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
For “capacitor connected in serial with main line” (two - phase and
three - phase net) application, please read the “SHORT GUIDE TO
CHOOSE THE RIGHT FILM CAPACITORS” at pag. 178 and contact
our Technical Service for choosing the safest solution.
Ø d ±0.05 p ≤15 p = 22.5
0.6 or 0.8* 0.8
*See size table.
All dimensions are in mm.
GENERAL TECHNICAL DATA
Dielectric: polypropylene lm.
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin lled. Box material is
solvent resistant and ame retardant according to UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive ammability category, manufacturing date code, approvals,
manufacturing plant.
Climatic category: 40/125/56 IEC 60068-1
Operating temperature range: -40 to +125°C
Related documents: IEC 60384-14; EN 60384-14
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 275 Vac (50/60Hz) / 560 Vdc
Capacitance range: 0.01µF to 1µF
TEST METHOD AND PERFORMANCE
Endurance:
Test conditions
Temperature: +125°C±2°C
Test duration: 1000 h
Voltage applied: 1.25 x VR +1000Vac 0.1 s/h
Performance
Dielectric strength: no dielectric breakdown or
ashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|: ≤ 10%
Insulation resistance: ≥ 50% of initial limit.
APPROVALS
(**)
ENEC
IEC 60384-14 Class X2 File No.CA08.00063
UL 1414
(up to 1µF, 85°C;
250Vac)
Across-the-line File No.E97797
CSA - C22.2 No.1
(up to 1µF, 85°C;
250Vac)
Across-the-line
certied for
Canada
File No.E97797
UL 1283
(310 Vac)
Electromagnetic
Interference
Filters
File No.E85238
CSA - C22.2 No.8
(310 Vac)
Electromagnetic
Interference
Filters certied
for Canada
File No.E85238
Approved according to IEC 60384-14
According to IEC 60065
(**) ENEC mark has replaced all the following European National
marks:
Not for use in series with the mains.
See www.kemet.com for more information.
09/2008
155
Ø d ±0.05 p ≤15 22.5 ≤ p ≤ 27.5 p = 37.5
0.6 or 0.8* 0.8 1.0
*See size table.
All dimensions are in mm.
GENERAL TECHNICAL DATA
Dielectric: polypropylene lm.
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin lled.
Box material is solvent resistant and ame retardant according to
UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive ammability category, manufacturing date code, approvals,
manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range: -40 to +110°C
Related documents: IEC 60384-14, EN 60384-14.
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 275Vac (50/60Hz) / 560 Vdc
Capacitance range: 0.022µF to 10µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M).
tolerance ±5% (J) available upon request
Dissipation factor (DF):
tgδ 10-4 at +25°C ±5°C: ≤15 (8)* at 1kHz
* Typical value
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge: 100 Vdc
Performance
≥1x105 MΩ (5x105 MΩ )* for C≤0.33µF
≥30000 s (150000 s )* for C>0.33µF
* Typical value
Test voltage between terminations (on all pieces):
1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C
R.46 SVERSION
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Typical applications: This special R46 release is designed
for applications in series with the main .
PRODUCT CODE: R46
Pitch Box thickness (B) Maximum dimensions (mm)
(mm) (mm) B max H max L max
10.0 All B +0.2 H +0.1 L +0.2
15.0 <7.5 B +0.2 H +0.1 L +0.3
15.0 ≥7.5 B +0.2 H +0.1 L +0.5
22.5 All B +0.2 H +0.1 L +0.3
27.5 All B +0.2 H +0.1 L +0.3
37.5 All B +0.3 H +0.1 L +0.3
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions 1st
Temperature: +40°C ± 2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Test conditions 2nd
Temperature: +60°C ± 2°C
Relative humidity (RH): 95% ±2%
Test duration: 500 hours
Test conditions 3rd
Temperature: +40°C ± 2°C
Relative humidity (RH): 93% ±2%
Test duration: 500 hours
Voltage value: 230 Vac, 50 Hz
Performance
Dielectric strength: no dielectric breakdown or
ashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|: ≤5%
Insulation resistance: ≥50% of initial limit.
Endurance:
Test conditions
Temperature: +110°C ± 2°C
Test duration: 1000 h
Voltage applied: 1.25 x VR +1000Vac 0.1 s/h
Performance
Dielectric strength: no dielectric breakdown or
ashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|: ≤10%
Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen):10 s ± 1 s
Performance
Capacitance change |∆C/C|: ≤2%
Loose Taped
Fig.1 Fig.2
Not for use in series with the mains.
See www.kemet.com for more information.
09/2008 156
Rated Cap.
(*)
275 Vac / 560 Vdc
Std dimensions
Ø d Max
dv/dt at
390Vdc
Part Number
B H L p (V/ µs)
0.010 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2100 - - S0 -
0.015 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2150 - - S0 -
0.022 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2220 - - S0 -
0.033 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2330 - - S0 -
0.047 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2470 - - S1 -
0.068 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2680 - - S0 -
0.10 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 3100 - - S1 M
0.10 µF 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3100 - - S0 -
0.15 µF 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3150 - - S1 M
0.15 µF 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3150 - - S0 -
0.15 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3150 - - S3 -
0.22 µF 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3220 - - S1 M
0.22 µF 8.5 14.5 18.0 15.0 0.6 400 R46 KI 3220 - - S0 -
0.22 µF 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3220 - - S2 -
0.22 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3220 - - S3 -
0.33 µF 13.0 12.0 18.0 15.0 0.8 400 R46 KI 3330 - - S1 -
0.33 µF 8.5 14.5 18.0 15.0 0.8 400 R46 KI 3330 - - S3 M
0.33 µF 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3330 - - S0 -
0.33 µF 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3330 - - S2 -
0.47 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3470 - - S0 -
0.47 µF 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3470 - - S1 M
0.56 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3560 - - S0 -
0.68 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3680 - - S0 M
0.22 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3220 - - S0 -
0.33 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3330 - - S1 M
0.33 µF 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3330 - - S0 -
0.47 µF 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3470 - - S1 M
0.47 µF 8.5 17.0 26.5 22.5 0.8 200 R46 KN 3470 - - S0 -
0.68 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 3680 - - S0 -
1.0 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4100 - - S2 M
1.0 µF 11.0 20.0 26.5 22.5 0.8 200 R46 KN 4100 - - S1 -
1.2 µF 13.0 22.0 26.5 22.5 0.8 200 R46 KN 4120 - - S0 -
0.47 µF 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3470 - - S0 -
0.68 µF 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3680 - - S1 -
1.0 µF 11.0 20.0 32.0 27.5 0.8 150 R46 KR 4100 - - S1 -
1.5 µF 13.0 22.0 32.0 27.5 0.8 150 R46 KR 4150 - - S1 -
2.2 µF 13.0 25.0 32.0 27.5 0.8 150 R46 KR 4220 - - S2 -
3.3 µF 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4330 - - S2 -
4.7 µF 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4470 - - S2 -
1.5 µF 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4150 - - S1 -
2.2 µF 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4220 - - S2 M
2.2 µF 13.0 24.0 41.5 37.5 1.0 100 R46 KW 4220 - - S1 -
3.3 µF 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4330 - - S1 -
4.7 µF 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4470 - - S2 M
4.7 µF 19.0 32.0 41.5 37.5 1.0 100 R46 KW 4470 - - S1 -
6.8 µF 20.0 40.0 41.5 37.5 1.0 100 R46 KW 4680 - - S2 -
10.0 µF 30.0 45.0 41.5 37.5 1.0 100 R46 KW 5100 - - S1 -
R.46 SVERSION
X2 CLASS (IEC60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Table 1
Standard
packaging style
Lead
length
(mm)
Taping style Ordering
code
(Digit 10 to 11)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
AMMO-PACK
AMMO-PACK
12.70
19.05
1
2
10.0/15.0
22.5
DQ
DQ
REEL Ø500mm
REEL Ø500mm
12.70
19.05
1
2
10.0/15.0
22.5/27.5
CK
CK
Loose, short leads
Loose, long leads
Loose, long leads
04 +2
25 -1/+2
30 +5
00
50
40
Loose, insulated
rigid leads
Loose, insulated
exible leads
30 +5
150 ±5
51
52
(**) ENEC mark has replaced all the following European
National marks:
APPROVALS
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
300Vac Available upon request
E12 Series available upon request
All dimensions are in mm
(**)
ENEC
IEC 60384-14 Class X2 File No.V4413
UL 1414
(up to 1µF, 85°C;
250Vac)
Across-the-line File No.E97797
CSA - C22.2 No.1
(up to 1µF, 85°C;
250Vac)
Across-the-line
certied for
Canada
File No.E97797
UL 1283
(310 Vac)
Electromagnetic
Interference
Filters
File No.E85238
CSA - C22.2 No.8
(310 Vac)
Electromagnetic
Interference
Filters certied
for Canada
File No.E85238
GB/T 14472 Class X2 File CQC03001008199
CQC03001008842
Approved according to IEC 60384-14
According to IEC 60065
Note: Ammo-pack is the preferred packaging for taped version.
Not for use in series with the mains.
See www.kemet.com for more information.
09/2008
157
Loose Taped
Fig.1 Fig.2
Insulated rigid leads Insulated exible leads 0.5mm2
Ø d ±0.05 P= 22.5 to 27.5 p = 37.5
0.8 1
All dimensions are in mm.
GENERAL TECHNICAL DATA
Dielectric: polypropylene lm.
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin lled.
Box material is solvent resistant and ame retardant according to
UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive ammability category, manufacturing date code, approvals,
manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range: -40 to +110°C
Related documents: IEC 60384-14, EN 60384-14.
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 275Vac (50/60Hz) / 560 Vdc
300Vac (50/60Hz) / 630 Vdc
Capacitance range: 0.22µF to 10µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M).
Dissipation factor (DF):
tgδ 10-4 at +25°C ±5°C: ≤10 (6)* at 1kHz *
Typical value
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge: 100 Vdc
Performance
≥1x105 MΩ (5x105 MΩ )* for C≤0.33µF
≥30000 s (150000 s )* for C>0.33µF
* Typical value
Test voltage between terminations (on all pieces):
R.46+R
Capacitors with discharge resistor
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Typical applications: interference suppression and
«across-the-line» applications. Suitable for use in situations
where failure of the capacitor would not lead to danger of
electric shock.
PRODUCT CODE: R46
Pitch Box thickness (B) Maximum dimensions (mm)
(mm) (mm) B max H max L max
22.5 All B +0.2 H +0.1 L +0.3
27.5 All B +0.2 H +0.1 L +0.3
37.5 All B +0.3 H +0.1 L +0.3
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions 1st
Temperature: +40°C ± 2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Performance
Dielectric strength: no dielectric breakdown or
ashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|: ≤5%
Insulation resistance: ≥50% of initial limit.
Endurance:
Test conditions
Temperature: +110°C ± 2°C
Test duration: 1000 h
Voltage applied: 1.25 x VR +1000Vac 0.1 s/h
Performance
Dielectric strength: no dielectric breakdown or
ashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|: ≤10%
Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen):10 s ± 1 s
Performance
Capacitance change |∆C/C|: ≤2%
APPROVALS
ENEC
IEC 60384-14 Class X2 File No.V4413
UL 1283
(310Vac-105°C)
Electromagnetic
Interference
Filters
File No.E85238
CSA - C22.2 No.8
(310Vac-105°C)
Electromagnetic
Interference
Filters certied
for Canada
File No.E85238
Approved according to IEC 60384-14
According to IEC 60065.
Not for use in series with the mains.
See www.kemet.com for more information.
09/2008 158
PRODUCT CODE SYSTEM
The part number, comprising 15 digits, is formed as follows:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
R 4 6 - -
Digit 1 to 3 Series code.
Digit 4 a.c. rated voltage:
K = 275Vac; 3 = 300Vac
Digit 5 Pitch:
N = 22.5; R = 27.5; W = 37.5 mm
Digit 6 to 9 Digits 7 - 8 - 9 indicate the rst three digits of
Capacitance value and the 6th digit indicates
the number of zeros that must be added to
obtain the Rated Capacitance in pF.
Digit 10 to 11 Mechanical version and/or packaging (table 1)
Digit 12 Identies the dimensions and electrical
characteristics.
Digit 13 Internal use
Digit 14 Capacitance tolerance:
K=±10%; M=±20%
Digit 15 Value of the discharge resistor (tolerance±10%)
according to the following table*:
R.46+R
Capacitors with discharge resistor
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
PRODUCT CODE: R46
Table 1
Standard
packaging style
Lead
length
(mm)
Taping style Ordering
code
(Digit 10 to 11)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
REEL Ø500mm 19.05 2 22.5/27.5 CK
Loose, short leads
Loose, long leads
Loose, long leads
04 +2
25 -1/+2
30 +5
00
50
40
Loose, insulated
rigid leads
Loose, insulated
exible leads
30 +5
150 ±5
51
52
Rated
Cap. (*)
300 Vac / 630 Vdc
Std dimensions Ø d
Max
dv/dt at
390Vdc
(V/ µs)
Part Number
B H L p
0.22 µF 7.0 16.0 26.5 22.5 0.8 200 R463N 3220 - - 01 - x
0.33 µF 8.5 17.0 26.5 22.5 0.8 200 R463N 3330 - - 01 - x
0.47 µF 10.0 18.5 26.5 22.5 0.8 200 R463N 3470 - - 01 - x
0.68 µF 11.0 20.0 26.5 22.5 0.8 200 R463N 3680 - - 01 - x
0.47 µF 11.0 20.0 32.0 27.5 0.8 150 R463R 3470 - - 01 - x
0.68 µF 11.0 20.0 32.0 27.5 0.8 150 R463R 3680 - - M1 - x
1.0 µF 13.0 22.0 32.0 27.5 0.8 150 R463R 4100 - - M1 - x
1.5 µF 13.0 22.0 32.0 27.5 0.8 150 R463R 4150 - - M1 - x
2.2 µF 14.0 28.0 32.0 27.5 0.8 150 R463R 4220 - - M1 - x
3.3 µF 18.0 33.0 32.0 27.5 0.8 150 R463R 4330 - - M2 - x
4.7 µF 22.0 37.0 32.0 27.5 0.8 150 R463R 4470 - - M1 - x
1.5 µF 11.0 22.0 41.5 37.5 1.0 100 R463W 4150 - - M1 - x
2.2 µF 13.0 24.0 41.5 37.5 1.0 100 R463W 4220 - - M1 - x
3.3 µF 16.0 28.5 41.5 37.5 1.0 100 R463W 4330 - - M1 - x
4.7 µF 19.0 32.0 41.5 37.5 1.0 100 R463W 4470 - - M1 - x
6.8 µF 20.0 40.0 41.5 37.5 1.0 100 R463W 4680 - - M2 - x
10.0 µF 24.0 44.0 41.5 37.5 1.0 100 R463W 5100 - - M1 - x
Rated
Cap. (*)
275 Vac / 560 Vdc
Std dimensions Ø d
Max
dv/dt at
390Vdc
(V/ µs)
Part Number
B H L p
0.22 µF 7.0 16.0 26.5 22.5 0.8 200 R46KN 3220 - - 01 - x
0.33 µF 8.5 17.0 26.5 22.5 0.8 200 R46KN 3330 - - 01 - x
0.47 µF 10.0 18.5 26.5 22.5 0.8 200 R46KN 3470 - - 01 - x
0.68 µF 11.0 20.0 26.5 22.5 0.8 200 R46KN 3680 - - 01 - x
0.47 µF 11.0 20.0 32.0 27.5 0.8 150 R46KR 3470 - - 01 - x
0.68 µF 11.0 20.0 32.0 27.5 0.8 150 R46KR 3680 - - M1 - x
1.0 µF 13.0 22.0 32.0 27.5 0.8 150 R46KR 4100 - - M1 - x
1.5 µF 13.0 22.0 32.0 27.5 0.8 150 R46KR 4150 - - M1 - x
2.2 µF 14.0 28.0 32.0 27.5 0.8 150 R46KR 4220 - - M1 - x
3.3 µF 18.0 33.0 32.0 27.5 0.8 150 R46KR 4330 - - M2 - x
4.7 µF 22.0 37.0 32.0 27.5 0.8 150 R46KR 4470 - - M1 - x
1.5 µF 11.0 22.0 41.5 37.5 1.0 100 R46KW 4150 - - M1 - x
2.2 µF 13.0 24.0 41.5 37.5 1.0 100 R46KW 4220 - - M1 - x
3.3 µF 16.0 28.5 41.5 37.5 1.0 100 R46KW 4330 - - M1 - x
4.7 µF 19.0 32.0 41.5 37.5 1.0 100 R46KW 4470 - - M1 - x
6.8 µF 20.0 40.0 41.5 37.5 1.0 100 R46KW 4680 - - M2 - x
10.0 µF 24.0 44.0 41.5 37.5 1.0 100 R46KW 5100 - - M1 - x
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
Value of discharge resistor (Table 2)
Rated voltage (3=300Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
Value of discharge resistor (Table 2)
*Other resistors are avaible upon
request.
Table 2
R code (x)
470 kΩE
680 kΩF
1 MΩG
1.2 MΩ L
1.5 MΩ N
2.2 MΩ P
3.3 MΩ Q
4.7 MΩ S
6.8 MΩ T
10 MΩ V
All dimensions are in mm
Not for use in series with the mains.
See www.kemet.com for more information.
